From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Marcin Juszkiewicz" <marcin.juszkiewicz@linaro.org>,
"Eduardo Habkost" <eduardo@habkost.net>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Yanan Wang" <wangyanan55@huawei.com>
Subject: [PULL 01/63] pci: SLT must be RO
Date: Wed, 4 Oct 2023 04:43:13 -0400 [thread overview]
Message-ID: <971c71a2dd22b9cde228a2a74f2a65622d037a9b.1696408966.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1696408966.git.mst@redhat.com>
current code sets PCI_SEC_LATENCY_TIMER to RW, but for
pcie to pcie bridges it must be RO 0 according to
pci express spec which says:
This register does not apply to PCI Express. It must be read-only
and hardwired to 00h. For PCI Express to PCI/PCI-X Bridges, refer to the
[PCIe-to-PCI-PCI-X-Bridge] for requirements for this register.
also, fix typo in comment where it's made writeable - this typo
is likely what prevented us noticing we violate this requirement
in the 1st place.
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <de9d05366a70172e1789d10591dbe59e39c3849c.1693432039.git.mst@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/pci/pci_bridge.h | 3 +++
hw/core/machine.c | 5 ++++-
hw/pci/pci.c | 2 +-
hw/pci/pci_bridge.c | 14 ++++++++++++++
4 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index ea54a81a15..5cd452115a 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -77,6 +77,9 @@ struct PCIBridge {
pci_map_irq_fn map_irq;
const char *bus_name;
+
+ /* SLT is RO for PCIE to PCIE bridges, but old QEMU versions had it RW */
+ bool pcie_writeable_slt_bug;
};
#define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
diff --git a/hw/core/machine.c b/hw/core/machine.c
index cb38b8cf4c..9ae8f793ae 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -32,6 +32,7 @@
#include "qemu/error-report.h"
#include "sysemu/qtest.h"
#include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/mem/nvdimm.h"
#include "migration/global_state.h"
#include "migration/vmstate.h"
@@ -40,7 +41,9 @@
#include "hw/virtio/virtio-pci.h"
#include "hw/virtio/virtio-net.h"
-GlobalProperty hw_compat_8_1[] = {};
+GlobalProperty hw_compat_8_1[] = {
+ { TYPE_PCI_BRIDGE, "x-pci-express-writeable-slt-bug", "true" },
+};
const size_t hw_compat_8_1_len = G_N_ELEMENTS(hw_compat_8_1);
GlobalProperty hw_compat_8_0[] = {
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 881d774fb6..b0d21bf43a 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -893,7 +893,7 @@ static void pci_init_w1cmask(PCIDevice *dev)
static void pci_init_mask_bridge(PCIDevice *d)
{
/* PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS and
- PCI_SEC_LETENCY_TIMER */
+ PCI_SEC_LATENCY_TIMER */
memset(d->wmask + PCI_PRIMARY_BUS, 0xff, 4);
/* base and limit */
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
index e7b9345615..6a4e38856d 100644
--- a/hw/pci/pci_bridge.c
+++ b/hw/pci/pci_bridge.c
@@ -38,6 +38,7 @@
#include "qapi/error.h"
#include "hw/acpi/acpi_aml_interface.h"
#include "hw/acpi/pci.h"
+#include "hw/qdev-properties.h"
/* PCI bridge subsystem vendor ID helper functions */
#define PCI_SSVID_SIZEOF 8
@@ -385,6 +386,11 @@ void pci_bridge_initfn(PCIDevice *dev, const char *typename)
pci_bridge_region_init(br);
QLIST_INIT(&sec_bus->child);
QLIST_INSERT_HEAD(&parent->child, sec_bus, sibling);
+
+ /* For express secondary buses, secondary latency timer is RO 0 */
+ if (pci_bus_is_express(sec_bus) && !br->pcie_writeable_slt_bug) {
+ dev->wmask[PCI_SEC_LATENCY_TIMER] = 0;
+ }
}
/* default qdev clean up function for PCI-to-PCI bridge */
@@ -466,10 +472,18 @@ int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
return 0;
}
+static Property pci_bridge_properties[] = {
+ DEFINE_PROP_BOOL("x-pci-express-writeable-slt-bug", PCIBridge,
+ pcie_writeable_slt_bug, false),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void pci_bridge_class_init(ObjectClass *klass, void *data)
{
AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);
+ DeviceClass *k = DEVICE_CLASS(klass);
+ device_class_set_props(k, pci_bridge_properties);
adevc->build_dev_aml = build_pci_bridge_aml;
}
--
MST
next prev parent reply other threads:[~2023-10-04 8:47 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 8:43 [PULL 00/63] virtio,pci: features, cleanups Michael S. Tsirkin
2023-10-04 8:43 ` Michael S. Tsirkin [this message]
2023-10-04 8:43 ` [PULL 02/63] hw/virtio: Propagate page_mask to vhost_vdpa_listener_skipped_section() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 03/63] hw/virtio: Propagate page_mask to vhost_vdpa_section_end() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 04/63] hw/virtio/vhost-vdpa: Inline TARGET_PAGE_ALIGN() macro Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 05/63] hw/virtio/vhost-vdpa: Use target-agnostic qemu_target_page_mask() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 06/63] hw/virtio: Build vhost-vdpa.o once Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 07/63] hw/virtio/meson: Rename softmmu_virtio_ss[] -> system_virtio_ss[] Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 08/63] virtio: add vhost-user-base and a generic vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 09/63] hw/virtio: add config support to vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 10/63] virtio-net: do not reset vlan filtering at set_features Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 11/63] virtio-net: Expose MAX_VLAN Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 12/63] vdpa: Restore vlan filtering state Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 13/63] vdpa: Allow VIRTIO_NET_F_CTRL_VLAN in SVQ Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 14/63] virtio: don't zero out memory region cache for indirect descriptors Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 15/63] vdpa: use first queue SVQ state for CVQ default Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 16/63] vdpa: export vhost_vdpa_set_vring_ready Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 17/63] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 18/63] vdpa: move vhost_vdpa_set_vring_ready to the caller Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 19/63] vdpa: remove net cvq migration blocker Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 20/63] vhost: Add count argument to vhost_svq_poll() Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 21/63] qmp: remove virtio_list, search QOM tree instead Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 22/63] qmp: update virtio feature maps, vhost-user-gpio introspection Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 23/63] vhost-user: move VhostUserProtocolFeature definition to header file Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 24/63] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 25/63] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 26/63] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 27/63] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 28/63] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 29/63] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 30/63] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-04 10:11 ` Laszlo Ersek
2023-10-04 12:53 ` Michael S. Tsirkin
2023-10-04 13:28 ` Laszlo Ersek
2023-10-04 8:44 ` [PULL 31/63] hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routing Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 32/63] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 33/63] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-04 17:46 ` Thomas Huth
2023-10-04 22:14 ` Michael S. Tsirkin
2023-10-04 23:09 ` [PATCH v3] " Dave Jiang
2023-10-05 3:36 ` Michael S. Tsirkin
2023-10-05 16:11 ` Dave Jiang
2023-10-05 16:32 ` Michael S. Tsirkin
2023-10-06 12:09 ` Jonathan Cameron via
2023-10-06 12:09 ` Jonathan Cameron
2023-10-06 17:50 ` Dan Williams
2023-10-06 22:15 ` [PATCH v4] " Dave Jiang
2023-10-09 15:47 ` Jonathan Cameron via
2023-10-09 15:47 ` Jonathan Cameron
2023-10-09 16:06 ` Dave Jiang
2023-10-09 15:44 ` [PATCH v3] " Jonathan Cameron via
2023-10-09 15:44 ` Jonathan Cameron
2023-10-07 21:17 ` Michael S. Tsirkin
2023-10-09 15:40 ` Jonathan Cameron via
2023-10-09 15:40 ` Jonathan Cameron
2023-10-05 17:00 ` Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 34/63] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 35/63] hw/i386/acpi-build: Use pc_madt_cpu_entry() directly Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 36/63] hw/acpi/cpu: Have build_cpus_aml() take a build_madt_cpu_fn callback Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 37/63] hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual method Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 38/63] hw/acpi/acpi_dev_interface: Remove now unused #include "hw/boards.h" Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 39/63] hw/i386: Remove now redundant TYPE_ACPI_GED_X86 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 40/63] hw/i386/acpi-build: Determine SMI command port just once Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 41/63] hw/acpi: Trace GPE access in all device models, not just PIIX4 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 42/63] hw/acpi/core: Trace enable and status registers of GPE separately Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 43/63] vdpa: fix gcc cvq_isolated uninitialized variable warning Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 44/63] vdpa net: zero vhost_vdpa iova_tree pointer at cleanup Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 45/63] hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 46/63] hw/cxl: Add utility functions decoder interleave ways and target count Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 47/63] hw/cxl: Fix and use same calculation for HDM decoder block size everywhere Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 48/63] hw/cxl: Support 4 HDM decoders at all levels of topology Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 49/63] hw/pci-bridge/cxl-upstream: Add serial number extended capability support Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 50/63] vdpa net: fix error message setting virtio status Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 51/63] vdpa net: stop probing if cannot set features Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 52/63] vdpa net: follow VirtIO initialization properly at cvq isolation probing Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 53/63] amd_iommu: Fix APIC address check Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 54/63] hw/i386/pc: improve physical address space bound check for 32-bit x86 systems Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 55/63] pcie_sriov: unregister_vfs(): fix error path Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 56/63] libvhost-user.c: add assertion to vu_message_read_default Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 57/63] virtio: use shadow_avail_idx while checking number of heads Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 58/63] virtio: remove unnecessary thread fence while reading next descriptor Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 59/63] virtio: remove unused next argument from virtqueue_split_read_next_desc() Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 60/63] util/uuid: add a hash function Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 61/63] hw/display: introduce virtio-dmabuf Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 62/63] vhost-user: add shared_object msg Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 63/63] libvhost-user: handle " Michael S. Tsirkin
2023-10-04 8:54 ` [PULL 00/63] virtio,pci: features, cleanups Philippe Mathieu-Daudé
2023-10-04 9:08 ` Michael S. Tsirkin
2023-10-04 8:58 ` Michael S. Tsirkin
2023-10-04 16:26 ` Michael S. Tsirkin
2023-10-04 16:50 ` Stefan Hajnoczi
2023-10-04 17:04 ` Michael S. Tsirkin
2023-10-04 17:40 ` Thomas Huth
2023-10-04 22:23 ` Michael S. Tsirkin
2023-10-05 6:10 ` Thomas Huth
2023-10-04 18:23 ` Stefan Hajnoczi
2023-10-04 17:20 ` Michael S. Tsirkin
2023-10-04 18:29 ` Stefan Hajnoczi
2023-10-04 22:16 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=971c71a2dd22b9cde228a2a74f2a65622d037a9b.1696408966.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=eduardo@habkost.net \
--cc=marcel.apfelbaum@gmail.com \
--cc=marcin.juszkiewicz@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=wangyanan55@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).