Re: [PATCH v2 01/13] s390x: protvirt: Add diag308 subcodes 8 - 10

[Thomas Huth <thuth@redhat.com>]

On 29/11/2019 10.47, Janosch Frank wrote:
[...]
> Subcodes 8-10 are not valid in protected mode, we have to do a subcode
> 3 and then the 8 and 10 combination for a protected reboot.

So if 8-10 are not valid in protected mode...

> @@ -59,6 +61,9 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3)
>  #define DIAG308_LOAD_NORMAL_DUMP    4
>  #define DIAG308_SET                 5
>  #define DIAG308_STORE               6
> +#define DIAG308_PV_SET              8
> +#define DIAG308_PV_STORE            9
> +#define DIAG308_PV_START            10
>  
>  static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
>                                uintptr_t ra, bool write)
> @@ -105,6 +110,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
>          s390_ipl_reset_request(cs, S390_RESET_REIPL);
>          break;
>      case DIAG308_SET:
> +    case DIAG308_PV_SET:

... should you maybe add a check here (and the other cases) to make sure
that the guest is currently not running in PV mode? Or is this taken
care of by the Ultravisor already?

>          if (diag308_parm_check(env, r1, addr, ra, false)) {
>              return;
>          }
> @@ -117,7 +123,8 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
>  
>          cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
>  
> -        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb)) {
> +        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
> +            !(iplb_valid_se(iplb) && s390_ipl_pv_check_comp(iplb) >= 0)) {
>              env->regs[r1 + 1] = DIAG_308_RC_INVALID;
>              goto out;
>          }
> @@ -128,10 +135,15 @@ out:
>          g_free(iplb);
>          return;
>      case DIAG308_STORE:
> +    case DIAG308_PV_STORE:
>          if (diag308_parm_check(env, r1, addr, ra, true)) {
>              return;
>          }
> -        iplb = s390_ipl_get_iplb();
> +        if (subcode == DIAG308_PV_STORE) {
> +            iplb = s390_ipl_get_iplb_secure();
> +        } else {
> +            iplb = s390_ipl_get_iplb();
> +        }
>          if (iplb) {
>              cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
>              env->regs[r1 + 1] = DIAG_308_RC_OK;
> @@ -139,6 +151,16 @@ out:
>              env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
>          }
>          return;
> +        break;

Please remove the break. Or the return. But let's not do both.

> +    case DIAG308_PV_START:
> +        iplb = s390_ipl_get_iplb_secure();
> +        if (!iplb_valid_se(iplb)) {
> +            env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
> +            return;
> +        }
> +
> +        s390_ipl_reset_request(cs, S390_RESET_PV);
> +        break;
>      default:
>          s390_program_interrupt(env, PGM_SPECIFICATION, ra);
>          break;
> 

 Thomas