From: Thomas Huth <thuth@redhat.com>
To: "Philippe Mathieu-Daudé" <f4bug@amsat.org>, qemu-devel@nongnu.org
Cc: "Juan Quintela" <quintela@redhat.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
"Hervé Poussineau" <hpoussin@reactos.org>,
"Gerd Hoffmann" <kraxel@redhat.com>
Subject: Re: [PATCH v2 3/4] hw/display/vga-mmio: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO
Date: Mon, 13 Dec 2021 11:48:20 +0100 [thread overview]
Message-ID: <99ebc4fb-f061-1e57-da07-e66035bacf9b@redhat.com> (raw)
In-Reply-To: <20211206224528.563588-4-f4bug@amsat.org>
On 06/12/2021 23.45, Philippe Mathieu-Daudé wrote:
> Introduce TYPE_VGA_MMIO, a sysbus device.
>
> While there is no change in the vga_mmio_init()
> interface, this is a migration compatibility break
> of the MIPS Acer Pica 61 Jazz machine (pica61).
It's unfortunate, but as far as I know, it would be pretty difficult or even
impossible to get this done without versioned machine types? So IMHO it's ok
to break this in this case here.
> Suggested-by: Thomas Huth <thuth@redhat.com>
> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/display/vga.h | 2 +
> hw/display/vga-mmio.c | 132 +++++++++++++++++++++++++++------------
> 2 files changed, 94 insertions(+), 40 deletions(-)
>
> diff --git a/include/hw/display/vga.h b/include/hw/display/vga.h
> index c16a5c26dae..98b2e560f9b 100644
> --- a/include/hw/display/vga.h
> +++ b/include/hw/display/vga.h
> @@ -24,6 +24,8 @@ enum vga_retrace_method {
>
> extern enum vga_retrace_method vga_retrace_method;
>
> +#define TYPE_VGA_MMIO "vga-mmio"
> +
> int vga_mmio_init(hwaddr vram_base, hwaddr ctrl_base,
> int it_shift, MemoryRegion *address_space);
>
> diff --git a/hw/display/vga-mmio.c b/hw/display/vga-mmio.c
> index 5671fdb920f..10bde32af5c 100644
> --- a/hw/display/vga-mmio.c
> +++ b/hw/display/vga-mmio.c
> @@ -23,21 +23,34 @@
> */
>
> #include "qemu/osdep.h"
> -#include "qemu/bitops.h"
> -#include "qemu/units.h"
> -#include "migration/vmstate.h"
> +#include "qapi/error.h"
> #include "hw/display/vga.h"
> +#include "hw/sysbus.h"
> +#include "hw/display/vga.h"
> +#include "hw/qdev-properties.h"
> #include "vga_int.h"
> -#include "ui/pixel_ops.h"
>
> -#define VGA_RAM_SIZE (8 * MiB)
> +/*
> + * QEMU interface:
> + * + sysbus MMIO region 0: VGA I/O registers
> + * + sysbus MMIO region 1: VGA MMIO registers
> + * + sysbus MMIO region 2: VGA memory
> + */
>
> -typedef struct VGAMmioState {
> +OBJECT_DECLARE_SIMPLE_TYPE(VGAMmioState, VGA_MMIO)
> +
> +struct VGAMmioState {
> + /*< private >*/
> + SysBusDevice parent_obj;
> +
> + /*< public >*/
> VGACommonState vga;
> - int it_shift;
> -} VGAMmioState;
> + MemoryRegion iomem;
> + MemoryRegion lowmem;
> +
> + uint8_t it_shift;
> +};
>
> -/* Memory mapped interface */
> static uint64_t vga_mm_read(void *opaque, hwaddr addr, unsigned size)
> {
> VGAMmioState *s = opaque;
> @@ -65,42 +78,81 @@ static const MemoryRegionOps vga_mm_ctrl_ops = {
> .endianness = DEVICE_NATIVE_ENDIAN,
> };
>
> +static void vga_mmio_reset(DeviceState *dev)
> +{
> + VGAMmioState *s = VGA_MMIO(dev);
> +
> + vga_common_reset(&s->vga);
> +}
> +
> int vga_mmio_init(hwaddr vram_base, hwaddr ctrl_base,
> int it_shift, MemoryRegion *address_space)
> {
> - VGAMmioState *s;
> - MemoryRegion *s_ioport_ctrl, *vga_io_memory;
> + DeviceState *dev;
> + SysBusDevice *s;
>
> - s = g_malloc0(sizeof(*s));
> + dev = qdev_new(TYPE_VGA_MMIO);
> + qdev_prop_set_uint8(dev, "it_shift", it_shift);
> + s = SYS_BUS_DEVICE(dev);
> + sysbus_realize_and_unref(s, &error_fatal);
>
> - s->vga.vram_size_mb = VGA_RAM_SIZE / MiB;
> - s->vga.global_vmstate = true;
> - vga_common_init(&s->vga, NULL);
> -
> - s->it_shift = it_shift;
> - s_ioport_ctrl = g_malloc(sizeof(*s_ioport_ctrl));
> - memory_region_init_io(s_ioport_ctrl, NULL, &vga_mm_ctrl_ops, s,
> - "vga-mm-ctrl", 0x100000);
> - memory_region_set_flush_coalesced(s_ioport_ctrl);
> -
> - vga_io_memory = g_malloc(sizeof(*vga_io_memory));
> - /* XXX: endianness? */
> - memory_region_init_io(vga_io_memory, NULL, &vga_mem_ops, &s->vga,
> - "vga-mem", 0x20000);
> -
> - vmstate_register(NULL, 0, &vmstate_vga_common, s);
> -
> - memory_region_add_subregion(address_space, ctrl_base, s_ioport_ctrl);
> - s->vga.bank_offset = 0;
> - memory_region_add_subregion(address_space,
> - vram_base + 0x000a0000, vga_io_memory);
> - memory_region_set_coalescing(vga_io_memory);
> -
> - s->vga.con = graphic_console_init(NULL, 0, s->vga.hw_ops, s);
> -
> - memory_region_add_subregion(address_space,
> - VBE_DISPI_LFB_PHYSICAL_ADDRESS,
> - &s->vga.vram);
> + sysbus_mmio_map(s, 0, ctrl_base);
> + sysbus_mmio_map(s, 1, vram_base + 0x000a0000);
> + sysbus_mmio_map(s, 2, VBE_DISPI_LFB_PHYSICAL_ADDRESS);
>
> return 0;
> }
> +
> +static void vga_mmio_realizefn(DeviceState *dev, Error **errp)
> +{
> + VGAMmioState *s = VGA_MMIO(dev);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> +
> + memory_region_init_io(&s->iomem, OBJECT(dev), &vga_mm_ctrl_ops, s,
> + "vga-mmio", 0x100000);
> + memory_region_set_flush_coalesced(&s->iomem);
> + sysbus_init_mmio(sbd, &s->iomem);
> +
> + /* XXX: endianness? */
> + memory_region_init_io(&s->lowmem, OBJECT(dev), &vga_mem_ops, &s->vga,
> + "vga-lowmem", 0x20000);
> + memory_region_set_coalescing(&s->lowmem);
> + sysbus_init_mmio(sbd, &s->lowmem);
> +
> + s->vga.bank_offset = 0;
> + s->vga.global_vmstate = true;
> + vga_common_init(&s->vga, OBJECT(dev));
> + sysbus_init_mmio(sbd, &s->vga.vram);
> + s->vga.con = graphic_console_init(dev, 0, s->vga.hw_ops, &s->vga);
> +}
> +
> +static Property vga_mmio_properties[] = {
> + DEFINE_PROP_UINT8("it_shift", VGAMmioState, it_shift, 0),
> + DEFINE_PROP_UINT32("vgamem_mb", VGAMmioState, vga.vram_size_mb, 8),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void vga_mmio_class_initfn(ObjectClass *klass, void *data)
Just a matter of taste, but I'd prefer "oc" instead of "klass".
Anyway:
Reviewed-by: Thomas Huth <thuth@redhat.com>
next prev parent reply other threads:[~2021-12-13 10:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 22:45 [PATCH v2 0/4] hw/display: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO Philippe Mathieu-Daudé
2021-12-06 22:45 ` [PATCH v2 1/4] hw/display: Rename VGA_ISA_MM -> VGA_MMIO Philippe Mathieu-Daudé
2021-12-06 22:45 ` [PATCH v2 2/4] hw/display/vga-mmio: Inline vga_mm_init() Philippe Mathieu-Daudé
2021-12-06 22:45 ` [PATCH v2 3/4] hw/display/vga-mmio: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO Philippe Mathieu-Daudé
2021-12-13 10:48 ` Thomas Huth [this message]
2021-12-13 11:05 ` Philippe Mathieu-Daudé
2021-12-13 22:46 ` Mark Cave-Ayland
2021-12-14 12:05 ` Juan Quintela
2021-12-14 12:52 ` Daniel P. Berrangé
2021-12-14 13:07 ` Philippe Mathieu-Daudé
2021-12-06 22:45 ` [PATCH v2 4/4] hw/mips/jazz: Inline vga_mmio_init() and remove it Philippe Mathieu-Daudé
2021-12-13 10:15 ` Thomas Huth
2021-12-13 9:53 ` [PATCH v2 0/4] hw/display: QOM'ify vga_mmio_init() as TYPE_VGA_MMIO Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99ebc4fb-f061-1e57-da07-e66035bacf9b@redhat.com \
--to=thuth@redhat.com \
--cc=dgilbert@redhat.com \
--cc=f4bug@amsat.org \
--cc=hpoussin@reactos.org \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).