qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Corey Minyard <minyard@acm.org>
To: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: qemu-devel@nongnu.org, Paolo Bonzini <pbonzini@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Corey Minyard <cminyard@mvista.com>
Subject: Re: [Qemu-devel] [PATCH v2 07/12] i2c:pm_smbus: Fix state transfer
Date: Mon, 26 Nov 2018 12:24:09 -0600	[thread overview]
Message-ID: <9d4437e4-c9ab-913d-5ac6-e9338b26a0a8@acm.org> (raw)
In-Reply-To: <20181126172058.GI2547@work-vm>

On 11/26/18 11:20 AM, Dr. David Alan Gilbert wrote:
> * minyard@acm.org (minyard@acm.org) wrote:
>> From: Corey Minyard <cminyard@mvista.com>
>>
>> Transfer the state information for the SMBus registers and
>> internal data so it will work on a VM transfer.
>>
>> Signed-off-by: Corey Minyard <cminyard@mvista.com>
>> Cc: Michael S. Tsirkin <mst@redhat.com>
>> Cc: Paolo Bonzini <pbonzini@redhat.com>
>> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>>   hw/acpi/piix4.c           |  3 ++-
>>   hw/i2c/pm_smbus.c         | 31 +++++++++++++++++++++++++++++++
>>   hw/i2c/smbus_ich9.c       |  6 ++++--
>>   include/hw/i2c/pm_smbus.h |  2 ++
>>   4 files changed, 39 insertions(+), 3 deletions(-)
>>
>> diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
>> index e330f24c71..313305f5a0 100644
>> --- a/hw/acpi/piix4.c
>> +++ b/hw/acpi/piix4.c
>> @@ -309,7 +309,7 @@ static const VMStateDescription vmstate_cpuhp_state = {
>>    */
>>   static const VMStateDescription vmstate_acpi = {
>>       .name = "piix4_pm",
>> -    .version_id = 3,
>> +    .version_id = 4,
> OK, so do we need to bump this version ?  Ideally you'd keep the version
> as is and let the needed do the work.


Got it, that makes sense.  Same for the comments below, I'll get all those.

Thanks,

-corey


>>       .minimum_version_id = 3,
>>       .minimum_version_id_old = 1,
>>       .load_state_old = acpi_load_old,
>> @@ -320,6 +320,7 @@ static const VMStateDescription vmstate_acpi = {
>>           VMSTATE_UINT16(ar.pm1.evt.en, PIIX4PMState),
>>           VMSTATE_UINT16(ar.pm1.cnt.cnt, PIIX4PMState),
>>           VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
>> +        VMSTATE_STRUCT(smb, PIIX4PMState, 4, pmsmb_vmstate, PMSMBus),
>>           VMSTATE_TIMER_PTR(ar.tmr.timer, PIIX4PMState),
>>           VMSTATE_INT64(ar.tmr.overflow_time, PIIX4PMState),
>>           VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
>> diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
>> index 8793113c25..75907e1c22 100644
>> --- a/hw/i2c/pm_smbus.c
>> +++ b/hw/i2c/pm_smbus.c
>> @@ -19,6 +19,7 @@
>>    */
>>   #include "qemu/osdep.h"
>>   #include "hw/hw.h"
>> +#include "hw/boards.h"
>>   #include "hw/i2c/pm_smbus.h"
>>   #include "hw/i2c/smbus_master.h"
>>   
>> @@ -450,6 +451,36 @@ static const MemoryRegionOps pm_smbus_ops = {
>>       .endianness = DEVICE_LITTLE_ENDIAN,
>>   };
>>   
>> +static bool pm_smbus_vmstate_needed(void *opaque)
>> +{
>> +    MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
>> +
>> +    return !mc->smbus_no_migration_support;
>> +}
> OK
>
>> +const VMStateDescription pmsmb_vmstate = {
>> +    .name = "pmsmb",
>> +    .version_id = 1,
>> +    .minimum_version_id = 1,
>> +    .needed = pm_smbus_vmstate_needed,
>> +    .fields = (VMStateField[]) {
>> +        VMSTATE_UINT8(smb_stat, PMSMBus),
>> +        VMSTATE_UINT8(smb_ctl, PMSMBus),
>> +        VMSTATE_UINT8(smb_cmd, PMSMBus),
>> +        VMSTATE_UINT8(smb_addr, PMSMBus),
>> +        VMSTATE_UINT8(smb_data0, PMSMBus),
>> +        VMSTATE_UINT8(smb_data1, PMSMBus),
>> +        VMSTATE_UINT32(smb_index, PMSMBus),
>> +        VMSTATE_UINT8_ARRAY(smb_data, PMSMBus, PM_SMBUS_MAX_MSG_SIZE),
>> +        VMSTATE_UINT8(smb_auxctl, PMSMBus),
>> +        VMSTATE_BOOL(i2c_enable, PMSMBus),
>> +        VMSTATE_BOOL(op_done, PMSMBus),
>> +        VMSTATE_BOOL(in_i2c_block_read, PMSMBus),
>> +        VMSTATE_BOOL(start_transaction_on_status_read, PMSMBus),
>> +        VMSTATE_END_OF_LIST()
>> +    }
>> +};
>> +
>>   void pm_smbus_init(DeviceState *parent, PMSMBus *smb, bool force_aux_blk)
>>   {
>>       smb->op_done = true;
>> diff --git a/hw/i2c/smbus_ich9.c b/hw/i2c/smbus_ich9.c
>> index e6d8d28194..c9b7482a54 100644
>> --- a/hw/i2c/smbus_ich9.c
>> +++ b/hw/i2c/smbus_ich9.c
>> @@ -45,10 +45,12 @@ typedef struct ICH9SMBState {
>>   
>>   static const VMStateDescription vmstate_ich9_smbus = {
>>       .name = "ich9_smb",
>> -    .version_id = 1,
>> +    .version_id = 2,
> Again, do we need to bump this?
>
>>       .minimum_version_id = 1,
>>       .fields = (VMStateField[]) {
>> -        VMSTATE_PCI_DEVICE(dev, struct ICH9SMBState),
>> +        VMSTATE_PCI_DEVICE(dev, ICH9SMBState),
>> +        VMSTATE_BOOL_V(irq_enabled, ICH9SMBState, 2),
> Can we make this a VMSTATE_BOOL_TEST (see VMSTATE_UINT64_TEST for the
> pattern) tied to the same .neede, and again we don't need to bump the
> version.
>
>> +        VMSTATE_STRUCT(smb, ICH9SMBState, 2, pmsmb_vmstate, PMSMBus),
> So that's taken care of by the .needed.
>
> Dave
>
>>           VMSTATE_END_OF_LIST()
>>       }
>>   };
>> diff --git a/include/hw/i2c/pm_smbus.h b/include/hw/i2c/pm_smbus.h
>> index 7bcca97672..5075fc64fa 100644
>> --- a/include/hw/i2c/pm_smbus.h
>> +++ b/include/hw/i2c/pm_smbus.h
>> @@ -43,4 +43,6 @@ typedef struct PMSMBus {
>>   
>>   void pm_smbus_init(DeviceState *parent, PMSMBus *smb, bool force_aux_blk);
>>   
>> +extern const VMStateDescription pmsmb_vmstate;
>> +
>>   #endif /* PM_SMBUS_H */
>> -- 
>> 2.17.1
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

  reply	other threads:[~2018-11-26 18:24 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-15 19:24 [Qemu-devel] [PATCH v2 00/12] RFC: Fix/add vmstate handling in some I2C code minyard
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 01/12] i2c: Split smbus into parts minyard
2018-11-15 22:22   ` Philippe Mathieu-Daudé
2018-11-16 13:20     ` Corey Minyard
2018-11-20 15:47       ` Peter Maydell
2018-11-20 19:30         ` Philippe Mathieu-Daudé
2018-11-21 11:59           ` Peter Maydell
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 02/12] i2c: have I2C receive operation return uint8_t minyard
2018-11-20 15:31   ` Peter Maydell
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 03/12] i2c: Simplify and correct the SMBus state machine minyard
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 04/12] i2c: Add a length check to the SMBus write handling minyard
2018-11-20 15:33   ` Peter Maydell
2018-11-20 16:58     ` Corey Minyard
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 05/12] i2c: Fix pm_smbus handling of I2C block read minyard
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 06/12] boards.h: Ignore migration for SMBus devices on older machines minyard
2018-11-26 17:23   ` Dr. David Alan Gilbert
2018-11-26 18:22     ` Corey Minyard
2018-11-27 16:01       ` Dr. David Alan Gilbert
2018-11-27 16:59         ` Corey Minyard
2018-11-27 18:14           ` Dr. David Alan Gilbert
2018-11-27 18:41             ` Laurent Vivier
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 07/12] i2c:pm_smbus: Fix state transfer minyard
2018-11-26 17:20   ` Dr. David Alan Gilbert
2018-11-26 18:24     ` Corey Minyard [this message]
2018-11-26 19:41       ` Corey Minyard
2018-11-27 18:20         ` Dr. David Alan Gilbert
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 08/12] i2c: Add an SMBus vmstate structure minyard
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 09/12] i2c: Add normal type name and cast to smbus_eeprom.c minyard
2018-11-20 15:34   ` Peter Maydell
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 10/12] i2c: Add a size constant for the smbus_eeprom size minyard
2018-11-15 22:34   ` Philippe Mathieu-Daudé
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 11/12] i2c: Add vmstate handling to the smbus eeprom minyard
2018-11-26 17:30   ` Dr. David Alan Gilbert
2018-11-15 19:24 ` [Qemu-devel] [PATCH v2 12/12] i2c: Add a reset function to smbus_eeprom minyard
2018-11-15 23:01 ` [Qemu-devel] [PATCH v2 00/12] RFC: Fix/add vmstate handling in some I2C code Philippe Mathieu-Daudé
2018-11-16 13:30   ` Corey Minyard
2018-11-26 14:11   ` Corey Minyard
2018-11-26 14:35     ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9d4437e4-c9ab-913d-5ac6-e9338b26a0a8@acm.org \
    --to=minyard@acm.org \
    --cc=cminyard@mvista.com \
    --cc=dgilbert@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).