From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Stefano Garzarella" <sgarzare@redhat.com>,
"Eugenio Pérez" <eperezma@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL v2 03/91] vhost-vdpa: check vhost_vdpa_set_vring_ready() return value
Date: Tue, 2 Jul 2024 16:13:45 -0400 [thread overview]
Message-ID: <9d5a807c4cb56837f11be9a9250f854fab951290.1719951026.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1719951026.git.mst@redhat.com>
From: Stefano Garzarella <sgarzare@redhat.com>
vhost_vdpa_set_vring_ready() could already fail, but if Linux's
patch [1] will be merged, it may fail with more chance if
userspace does not activate virtqueues before DRIVER_OK when
VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK is not negotiated.
So better check its return value anyway.
[1] https://lore.kernel.org/virtualization/20240206145154.118044-1-sgarzare@redhat.com/T/#u
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240322092315.31885-1-sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
net/vhost-vdpa.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 85e73dd6a7..eda714d1a4 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -399,7 +399,10 @@ static int vhost_vdpa_net_data_load(NetClientState *nc)
}
for (int i = 0; i < v->dev->nvqs; ++i) {
- vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+ int ret = vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+ if (ret < 0) {
+ return ret;
+ }
}
return 0;
}
@@ -1238,7 +1241,10 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
- vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
+ r = vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
+ if (unlikely(r < 0)) {
+ return r;
+ }
if (v->shadow_vqs_enabled) {
n = VIRTIO_NET(v->dev->vdev);
@@ -1277,7 +1283,10 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
}
for (int i = 0; i < v->dev->vq_index; ++i) {
- vhost_vdpa_set_vring_ready(v, i);
+ r = vhost_vdpa_set_vring_ready(v, i);
+ if (unlikely(r < 0)) {
+ return r;
+ }
}
return 0;
--
MST
next prev parent reply other threads:[~2024-07-02 20:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-02 20:13 [PULL v2 00/91] virtio: features,fixes Michael S. Tsirkin
2024-07-02 20:13 ` [PULL v2 01/91] vhost: dirty log should be per backend type Michael S. Tsirkin
2024-07-02 20:13 ` [PULL v2 02/91] vhost: Perform memory section dirty scans once per iteration Michael S. Tsirkin
2024-07-02 20:13 ` Michael S. Tsirkin [this message]
2024-07-02 20:13 ` [PULL v2 04/91] virtio/virtio-pci: Handle extra notification data Michael S. Tsirkin
2024-07-02 20:13 ` [PULL v2 05/91] virtio: Prevent creation of device using notification-data with ioeventfd Michael S. Tsirkin
2024-07-02 20:13 ` [PULL v2 06/91] virtio-mmio: Handle extra notification data Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 07/91] virtio-ccw: " Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 08/91] vhost/vhost-user: Add VIRTIO_F_NOTIFICATION_DATA to vhost feature bits Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 09/91] Fix vhost user assertion when sending more than one fd Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 10/91] vhost-vsock: add VIRTIO_F_RING_PACKED to feature_bits Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 11/91] hw/virtio: Fix obtain the buffer id from the last descriptor Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 12/91] virtio-pci: only reset pm state during resetting Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 13/91] vhost-user-gpu: fix import of DMABUF Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 14/91] Revert "vhost-user: fix lost reconnect" Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 15/91] vhost-user: fix lost reconnect again Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 16/91] hw/cxl/mailbox: change CCI cmd set structure to be a member, not a reference Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 17/91] hw/cxl/mailbox: interface to add CCI commands to an existing CCI Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 18/91] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command Michael S. Tsirkin
2024-07-02 20:14 ` [PULL v2 19/91] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9d5a807c4cb56837f11be9a9250f854fab951290.1719951026.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sgarzare@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).