From: Blue Swirl <blauwirbel@gmail.com>
To: Bob Breuer <breuerr@mc.net>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: [PATCH] sparc32: ledma extra registers
Date: Sat, 18 Dec 2010 18:53:58 +0000 [thread overview]
Message-ID: <AANLkTi=uo-7La8+XxVV3UcEkX3nuT++AazrUTcnTSf9_@mail.gmail.com> (raw)
In-Reply-To: <4D0CEAB0.9030706@mc.net>
Thanks, applied.
On Sat, Dec 18, 2010 at 5:09 PM, Bob Breuer <breuerr@mc.net> wrote:
> ledma has 0x20 bytes of registers according to OBP, and at least Solaris9
> reads the 5th register which is beyond what we've mapped. So let's setup
> a flag (inspired by a previous patch from Blue Swirl) to identify ledma
> from espdma, and map another 16 bytes of registers which return 0.
>
> Signed-off-by: Bob Breuer <breuerr@mc.net>
> ---
> hw/sparc32_dma.c | 15 ++++++++++++++-
> hw/sun4m.c | 16 +++++++++-------
> 2 files changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/hw/sparc32_dma.c b/hw/sparc32_dma.c
> index e78f025..56be8c8 100644
> --- a/hw/sparc32_dma.c
> +++ b/hw/sparc32_dma.c
> @@ -44,6 +44,9 @@
> /* We need the mask, because one instance of the device is not page
> aligned (ledma, start address 0x0010) */
> #define DMA_MASK (DMA_SIZE - 1)
> +/* ledma has more than 4 registers, Solaris reads the 5th one */
> +#define DMA_ETH_SIZE (8 * sizeof(uint32_t))
> +#define DMA_MAX_REG_OFFSET (2 * DMA_SIZE - 1)
>
> #define DMA_VER 0xa0000000
> #define DMA_INTR 1
> @@ -65,6 +68,7 @@ struct DMAState {
> qemu_irq irq;
> void *iommu;
> qemu_irq gpio[2];
> + uint32_t is_ledma;
> };
>
> enum {
> @@ -165,6 +169,9 @@ static uint32_t dma_mem_readl(void *opaque, target_phys_addr_t addr)
> DMAState *s = opaque;
> uint32_t saddr;
>
> + if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
> + return 0; /* extra mystery register(s) */
> + }
> saddr = (addr & DMA_MASK) >> 2;
> trace_sparc32_dma_mem_readl(addr, s->dmaregs[saddr]);
> return s->dmaregs[saddr];
> @@ -175,6 +182,9 @@ static void dma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
> DMAState *s = opaque;
> uint32_t saddr;
>
> + if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
> + return; /* extra mystery register(s) */
> + }
> saddr = (addr & DMA_MASK) >> 2;
> trace_sparc32_dma_mem_writel(addr, s->dmaregs[saddr], val);
> switch (saddr) {
> @@ -254,12 +264,14 @@ static int sparc32_dma_init1(SysBusDevice *dev)
> {
> DMAState *s = FROM_SYSBUS(DMAState, dev);
> int dma_io_memory;
> + int reg_size;
>
> sysbus_init_irq(dev, &s->irq);
>
> dma_io_memory = cpu_register_io_memory(dma_mem_read, dma_mem_write, s,
> DEVICE_NATIVE_ENDIAN);
> - sysbus_init_mmio(dev, DMA_SIZE, dma_io_memory);
> + reg_size = s->is_ledma ? DMA_ETH_SIZE : DMA_SIZE;
> + sysbus_init_mmio(dev, reg_size, dma_io_memory);
>
> qdev_init_gpio_in(&dev->qdev, dma_set_irq, 1);
> qdev_init_gpio_out(&dev->qdev, s->gpio, 2);
> @@ -275,6 +287,7 @@ static SysBusDeviceInfo sparc32_dma_info = {
> .qdev.reset = dma_reset,
> .qdev.props = (Property[]) {
> DEFINE_PROP_PTR("iommu_opaque", DMAState, iommu),
> + DEFINE_PROP_UINT32("is_ledma", DMAState, is_ledma, 0),
> DEFINE_PROP_END_OF_LIST(),
> }
> };
> diff --git a/hw/sun4m.c b/hw/sun4m.c
> index 4795b3f..30e8a21 100644
> --- a/hw/sun4m.c
> +++ b/hw/sun4m.c
> @@ -378,13 +378,14 @@ static void *iommu_init(target_phys_addr_t addr, uint32_t version, qemu_irq irq)
> }
>
> static void *sparc32_dma_init(target_phys_addr_t daddr, qemu_irq parent_irq,
> - void *iommu, qemu_irq *dev_irq)
> + void *iommu, qemu_irq *dev_irq, int is_ledma)
> {
> DeviceState *dev;
> SysBusDevice *s;
>
> dev = qdev_create(NULL, "sparc32_dma");
> qdev_prop_set_ptr(dev, "iommu_opaque", iommu);
> + qdev_prop_set_uint32(dev, "is_ledma", is_ledma);
> qdev_init_nofail(dev);
> s = sysbus_from_qdev(dev);
> sysbus_connect_irq(s, 0, parent_irq);
> @@ -862,10 +863,10 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef, ram_addr_t RAM_size,
> }
>
> espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[18],
> - iommu, &espdma_irq);
> + iommu, &espdma_irq, 0);
>
> ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
> - slavio_irq[16], iommu, &ledma_irq);
> + slavio_irq[16], iommu, &ledma_irq, 1);
>
> if (graphic_depth != 8 && graphic_depth != 24) {
> fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
> @@ -1524,10 +1525,11 @@ static void sun4d_hw_init(const struct sun4d_hwdef *hwdef, ram_addr_t RAM_size,
> sbi_irq[0]);
>
> espdma = sparc32_dma_init(hwdef->espdma_base, sbi_irq[3],
> - iounits[0], &espdma_irq);
> + iounits[0], &espdma_irq, 0);
>
> + /* should be lebuffer instead */
> ledma = sparc32_dma_init(hwdef->ledma_base, sbi_irq[4],
> - iounits[0], &ledma_irq);
> + iounits[0], &ledma_irq, 0);
>
> if (graphic_depth != 8 && graphic_depth != 24) {
> fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
> @@ -1707,10 +1709,10 @@ static void sun4c_hw_init(const struct sun4c_hwdef *hwdef, ram_addr_t RAM_size,
> slavio_irq[1]);
>
> espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[2],
> - iommu, &espdma_irq);
> + iommu, &espdma_irq, 0);
>
> ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
> - slavio_irq[3], iommu, &ledma_irq);
> + slavio_irq[3], iommu, &ledma_irq, 1);
>
> if (graphic_depth != 8 && graphic_depth != 24) {
> fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
>
>
>
next prev parent reply other threads:[~2010-12-18 18:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-18 17:09 [Qemu-devel] [PATCH] sparc32: ledma extra registers Bob Breuer
2010-12-18 18:53 ` Blue Swirl [this message]
2010-12-18 20:26 ` [Qemu-devel] " Andreas Färber
2010-12-19 19:37 ` Bob Breuer
2010-12-19 20:00 ` [Qemu-devel] [PATCH] sparc32: ledma extra registers need tracing too Bob Breuer
2010-12-20 17:55 ` [Qemu-devel] [PATCH v2] " Bob Breuer
2010-12-20 21:20 ` [Qemu-devel] " Blue Swirl
2010-12-20 10:22 ` [Qemu-devel] Re: [PATCH] sparc32: ledma extra registers Artyom Tarasenko
2010-12-20 17:33 ` Bob Breuer
2010-12-21 9:28 ` Artyom Tarasenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='AANLkTi=uo-7La8+XxVV3UcEkX3nuT++AazrUTcnTSf9_@mail.gmail.com' \
--to=blauwirbel@gmail.com \
--cc=breuerr@mc.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).