From: Bernhard Beschow <shentey@gmail.com>
To: Stefano Stabellini <sstabellini@kernel.org>, mst@redhat.com
Cc: qemu-devel@nongnu.org,
"Richard Henderson" <richard.henderson@linaro.org>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"David Woodhouse" <dwmw@amazon.co.uk>,
"Eduardo Habkost" <eduardo@habkost.net>,
"Chuck Zmudzinski" <brchuckz@aol.com>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Hervé Poussineau" <hpoussin@reactos.org>,
"Paul Durrant" <paul@xen.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Anthony Perard" <anthony.perard@citrix.com>,
xen-devel@lists.xenproject.org
Subject: Re: [PATCH v4 0/7] Resolve TYPE_PIIX3_XEN_DEVICE
Date: Mon, 05 Jun 2023 07:01:42 +0000 [thread overview]
Message-ID: <ADD39905-0305-477A-8801-C1F561E0DFD4@gmail.com> (raw)
In-Reply-To: <EB3E61EB-B543-4B15-94A9-C16A66437601@gmail.com>
Am 22. Mai 2023 15:42:03 UTC schrieb Bernhard Beschow <shentey@gmail.com>:
>
>
>Am 15. Mai 2023 20:52:40 UTC schrieb Stefano Stabellini <sstabellini@kernel.org>:
>>On Sat, 13 May 2023, Bernhard Beschow wrote:
>>> Am 21. April 2023 07:38:10 UTC schrieb "Michael S. Tsirkin" <mst@redhat.com>:
>>> >On Mon, Apr 03, 2023 at 09:41:17AM +0200, Bernhard Beschow wrote:
>>> >> There is currently a dedicated PIIX3 device model for use under Xen. By reusing
>>> >> existing PCI API during initialization this device model can be eliminated and
>>> >> the plain PIIX3 device model can be used instead.
>>> >>
>>> >> Resolving TYPE_PIIX3_XEN_DEVICE results in less code while also making Xen
>>> >> agnostic towards the precise south bridge being used in the PC machine. The
>>> >> latter might become particularily interesting once PIIX4 becomes usable in the
>>> >> PC machine, avoiding the "Frankenstein" use of PIIX4_ACPI in PIIX3.
>>> >
>>> >xen stuff so I assume that tree?
>>>
>>> Ping
>>
>>I am OK either way. Michael, what do you prefer?
>>
>>Normally I would suggest for you to pick up the patches. But as it
>>happens I'll have to likely send another pull request in a week or two
>>and I can add these patches to it.
>>
>>Let me know your preference and I am happy to follow it.
>
>Hi Stefano,
>
>Michael's PR was merged last week. How about including this series into your PR then?
Ping
>
>Best regards,
>Bernhard
>
>>
>>
>>> >
>>> >> Testing done:
>>> >> - `make check`
>>> >> - Run `xl create` with the following config:
>>> >> name = "Manjaro"
>>> >> type = 'hvm'
>>> >> memory = 1536
>>> >> apic = 1
>>> >> usb = 1
>>> >> disk = [ "file:manjaro-kde-21.2.6-220416-linux515.iso,hdc:cdrom,r" ]
>>> >> device_model_override = "/usr/bin/qemu-system-x86_64"
>>> >> vga = "stdvga"
>>> >> sdl = 1
>>> >> - `qemu-system-x86_64 -M pc -m 2G -cpu host -accel kvm \
>>> >> -cdrom manjaro-kde-21.2.6-220416-linux515.iso`
>>> >>
>>> >> v4:
>>> >> - Add patch fixing latent memory leak in pci_bus_irqs() (Anthony)
>>> >>
>>> >> v3:
>>> >> - Rebase onto master
>>> >>
>>> >> v2:
>>> >> - xen_piix3_set_irq() is already generic. Just rename it. (Chuck)
>>> >>
>>> >> Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
>>> >>
>>> >> Bernhard Beschow (7):
>>> >> include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()
>>> >> hw/pci/pci.c: Don't leak PCIBus::irq_count[] in pci_bus_irqs()
>>> >> hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize()
>>> >> hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3
>>> >> hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config()
>>> >> hw/isa/piix3: Resolve redundant k->config_write assignments
>>> >> hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE
>>> >>
>>> >> include/hw/southbridge/piix.h | 1 -
>>> >> include/hw/xen/xen.h | 2 +-
>>> >> hw/i386/pc_piix.c | 36 +++++++++++++++++++--
>>> >> hw/i386/xen/xen-hvm.c | 2 +-
>>> >> hw/isa/piix3.c | 60 +----------------------------------
>>> >> hw/pci/pci.c | 2 ++
>>> >> stubs/xen-hw-stub.c | 2 +-
>>> >> 7 files changed, 39 insertions(+), 66 deletions(-)
>>> >>
>>> >> --
>>> >> 2.40.0
>>> >>
>>> >
>>>
next prev parent reply other threads:[~2023-06-05 7:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-03 7:41 [PATCH v4 0/7] Resolve TYPE_PIIX3_XEN_DEVICE Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 1/7] include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq() Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 2/7] hw/pci/pci.c: Don't leak PCIBus::irq_count[] in pci_bus_irqs() Bernhard Beschow
2023-04-19 19:31 ` Bernhard Beschow
2023-04-21 7:37 ` Michael S. Tsirkin
2023-04-03 7:41 ` [PATCH v4 3/7] hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 4/7] hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3 Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 5/7] hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config() Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 6/7] hw/isa/piix3: Resolve redundant k->config_write assignments Bernhard Beschow
2023-04-03 7:41 ` [PATCH v4 7/7] hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE Bernhard Beschow
2023-04-21 7:38 ` [PATCH v4 0/7] Resolve TYPE_PIIX3_XEN_DEVICE Michael S. Tsirkin
2023-04-21 16:35 ` Bernhard Beschow
2023-05-13 11:44 ` Bernhard Beschow
2023-05-15 20:52 ` Stefano Stabellini
2023-05-22 15:42 ` Bernhard Beschow
2023-06-05 7:01 ` Bernhard Beschow [this message]
2023-06-08 22:43 ` Stefano Stabellini
2023-06-09 0:23 ` Stefano Stabellini
2023-06-09 10:46 ` Anthony PERARD via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ADD39905-0305-477A-8801-C1F561E0DFD4@gmail.com \
--to=shentey@gmail.com \
--cc=anthony.perard@citrix.com \
--cc=aurelien@aurel32.net \
--cc=brchuckz@aol.com \
--cc=dwmw@amazon.co.uk \
--cc=eduardo@habkost.net \
--cc=hpoussin@reactos.org \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=paul@xen.org \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).