* Re: [Qemu-devel] [OpenBIOS] solaris 8 on sparc, webstart launcher crashing
[not found] <BANLkTikvu6JNK0LfyOVfq3Qbu4OTrZmA4g@mail.gmail.com>
@ 2011-05-28 6:40 ` Blue Swirl
2011-05-28 17:55 ` Brian Vandenberg
2011-05-31 9:28 ` Mark Cave-Ayland
0 siblings, 2 replies; 4+ messages in thread
From: Blue Swirl @ 2011-05-28 6:40 UTC (permalink / raw)
To: The OpenBIOS Mailinglist; +Cc: qemu-devel
On Sat, May 28, 2011 at 12:45 AM, Brian Vandenberg <phantall@gmail.com> wrote:
> Greetings,
>
> I'm unsure whether the issue I'm running into is related to
> OpenBios, qemu, something buggy in this solaris distribution, or some
> combination thereof. Feel free to redirect me as appropriate.
>
> I'm able to install Solaris 8 (02/04) from the "Solaris 8 Software
> disk 1" disk. I see a few different behaviors depending on what I
> try:
>
> 1) boot from disk0:a without any special options:
>
> After specifying a root password, it says "Starting Web Start
> Launcher in Command Line Mode" and shortly thereafter says "The
> Webstart launcher has terminated unexpectedly." with no further
> details, except to say the machine will reboot after pressing enter.
>
> 2) Do the same thing, but with -v:
>
> The result doesn't seem predictable. Sometimes it just hangs after
> the "Starting ..." line, other times it dies with a variety of errors.
> I'll try to summarize below:
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Starting Web Start Launcher in Command Line Mode.
> SIGSEGV 11 segmentation violation
> si_signo [11]: SEGV
> si_errno [0]:
> si_code [1]: SEGV_MAPPER [addr: 0x1000100
>
> stackpointer=EE73E578
>
> Inconsistent thread : best efforts attempt (may fail)
> "Thread-1" (TID:0x34c470, sys_thread_t:0x34c3a8, state:R, thread_t:
> t@12, threadID:0xee74098, stack_bottom:0xee740d98, stack_size:0x1fd98)
> prio=5 *current thread*
>
> [1] java.util.ResourceBundle.getBundle(ResourceBundle.java:346)
> [2] java.awt.Toolkit$3.run(Toolkit.java:887)
> [3] java.security.AccessController.doPriveleged(Native Method)
> [4] java.awt.Toolkit.<clinit>(Toolkit.java:882)
> [5] java.awt.Component.<clinit>(Component.java:336)
> [6] com.sun.wizards.core.WizardTreeManager.createWizardPanel(WizardTreeManager.java:801)
> [7] com.sun.wizards.core.WizardTreeManager.<init>(WizardTreeManager.java:265)
> [8] com.sun.wizards.core.CommandLineConsole.java:78)
> [9] java.lang.Thread.run(Thread.java:479)
> ------------------------------
>
> Inconsistent thread : best efforts attempt (may fail)
> "process reaper" (TID:0x2c4600, sys_thread_t:0x2c4538, state:R,
> thread_t: t@10, threadID:0xee7b0d98, stack_bottom:0xee7b0d98,
> stack_size:0x1fd98) prio=5
>
> [1] java.lang.UNIXProcess.waitForProcessExit(Native Method)
> [2] java.lang.UNIXProcess.access$10(UNIXProcess.java:30)
> [3] java.lang.UNIXProcess$3.run(UNIXProcess.java:74)
> --------------------------
>
> Inconsistent thread : best efforts attempt (may fail)
> "Finalizer" (TID:0x156d80, sys_thread_t:0x156cb8, state:CW, thread_t:
> t&2, threadID:0xee890d98, stack_bottom:0xee890d98, stack_size:0x1fd98)
> prio=8
>
> [1] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:145)
> [2] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:167)
> [3] java.lang.ref.Finalizer$FinalizerWorker$FinalizerThread.run(Finalizer.java:117)
> -------------------------
>
> Inconsistent thread : best efforts attempt (may fail)
> "Reference Handler" (TID:0x155e20, sys_thread_t:0x155d58, state:CW,
> thread_t: t@6, threadID:0xee8c0d98, stack_bottom:0xee8c0d98,
> stack_size:0x1fd98) prio=10
>
> [1] java.lang.Object.wait(Object.java:417)
> [2] java.lang.ref.Reference$ReferenceHandler.run(Reference.java:129)
> -------------------------
>
> Inconsistent thread : best efforts attempt (may fail)
> "Signal dispatcher" (TID:0x135278, sys_thread_t:0x1351b0, state:MW,
> thread_t: t@5, threadID:0xee8f0d98, stack_bottom:0xee8f0d98,
> stack_size:0x1fd98) prio=10
>
> (note the lack of stack trace here)
>
> ------------------------
>
> Inconsistent thread : best efforts attempt (may fail)
> "main" (TID:0x390d0, sys_thread_t:0x39008, state:R, thread_t: t@1,
> threadID:0x251d0, stack_bottom:0xf0000000, stack_size:0x800000) prio=5
>
> [1] java.io.ObjectInputStream.loadClassO(Native Method)
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> ... after which the VM stopped responding.
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Starting Web Start Launcher in Command Line Mode.
> signal fault in critical section
> signal number: 11, signal code: 1,
> fault address: 0xe9ff0de8, pc: 0xef40d4a8, sp: 0xee7a2c78
> libthread panic: fault in libthread critical section : dumping core
> (PID: 327 LWP 10)
> stacktrace:
> ef40d49c
> ef40f134
> ef408c48
> 0
>
> Abort - core dumped
> The Webstart launcher has terminated unexpectedly.
> (some stuff about the machine rebooting on <enter>)
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> As a side-note, seemingly at random I see the following message a lot
> (including during that last bit I quoted):
>
> Assertion failed: MUTEX_HELD(&svc_thr_mutex), file ../rpc/svc_run.c, line 757
>
> 3) Boot in single-user mode
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Starting Web Start Launcher in Command Line Mode.
> signal fault in critical section
> signal number: 11, signal code: 1,
> fault address: 0xee82005c, pc: 0xef7c7248, sp: 0xee73e198
> libthread panic: fault in libthread critical section : dumping core
> (PID: 330 LWP 9)
> stacktrace:
> (...)
>
> Segmentation Fault - core dumped
> (terminated unexpectedly, yada yada)
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> ... where (...) is a huge stack trace. I have to copy this by hand
> ... ya, I really hope you don't need that. Lemme know if you do,
> though.
>
> I was able to get the exact same error & stack trace as the sig11 one
> from (2) above. Addresses were the same, only diferences were the
> PID, LWP, and sp (330, 9, 0xee752c78)
>
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Starting Web Start Launcher in Command Line Mode.
> Fri May 27 15:29:19 2011 fatal: mounting of "/vol" failed
> signal fault in critical section
> signal number: 11, signal code: 1,
> fault address: 0xee780de8, pc: 0xef40d4a8, sp: 0xeb1b2c78
> libthread panic: fault in libthread critical section : dumping core
> (PID: 330 LWP 12)
> stacktrace:
> ef40d49c
> ef40f134
> ef408c48
> 0
> Abort - core dumped
> (blahdy blah)
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> For reference, I'm using a 3g qcow2 image. I originally formatted it
> as a "SUN2.9G" in the format utility, but I let it autoconfigure the
> partitions. partition '0' is root (1.18G), '1' is swap (149m), '2' is
> backup (2.71g), and '7' is home (1.39g). There's overlap in the
> cylinder ranges specified and the total size between those partitions
> is larger than 3g ... but, I have no idea whether that's just a
> Sun-ism, or whether I need to partition manually.
>
> I don't think it's my partitions, though. The 'vol' directory doesn't
> exist in my root before I try to get the webstart stuff to run, so I
> think it's creating that directory and trying to mount an image to it.
>
>
> Additionally, I'm starting qemu with:
>
> ./qemu_system_sparc -nographic -bios
> /imgpath/openbios-sparc32_artyom.bin -hda
> /imgpath/solaris2.8-img3.qcow2 -m 256 -net nic -net user -cdrom
> /imgpath/solaris2.8/software_1of2.iso prom-env 'auto-boot?=false'
> -snapshot
>
>
> If anyone has a good idea, I'm all ears ... (or is it eyes?)
I suppose this is a problem with QEMU since the OS has started up
successfully. The way to verify this would be to check if this happens
also with OBP.
If the problem is on the QEMU side, getting relevant QEMU debug logs
(-d in_asm,int which needs #define DEBUG_PCALL enabled in
target-sparc/op_helper.c) would be needed. Those will be quite large
and the relevant info is only near the end.
^ permalink raw reply [flat|nested] 4+ messages in thread