Re: [RFC v5 00/68] support vector extension v1.0

[Frank Chang <frank.chang@sifive.com>]

[-- Attachment #1: Type: text/plain, Size: 8233 bytes --]

ping 2nd~

On Tue, Oct 20, 2020 at 3:42 PM Frank Chang <frank.chang@sifive.com> wrote:

> On Wed, Sep 30, 2020 at 3:04 AM <frank.chang@sifive.com> wrote:
>
>> From: Frank Chang <frank.chang@sifive.com>
>>
>> This patchset implements the vector extension v1.0 for RISC-V on QEMU.
>>
>> This patchset is sent as RFC because RVV v1.0 is still in draft state.
>> v2 patchset was sent for RVV v0.9 and bumped to RVV v1.0 since v3
>> patchset.
>>
>> The port is available here:
>> https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v5
>>
>> You can change the cpu argument: vext_spec to v1.0 (i.e. vext_spec=v1.0)
>> to run with RVV v1.0 instructions.
>>
>> Note: This patchset depends on two other patchsets listed in Based-on
>>       section below so it might not able to be built unless those two
>>       patchsets are applied.
>>
>> Changelog:
>>
>> v5
>>   * refactor RVV v1.0 check functions.
>>     (Thanks to Richard Henderson's bitwise tricks.)
>>   * relax RV_VLEN_MAX to 1024-bits.
>>   * implement vstart CSR's behaviors.
>>   * trigger illegal instruction exception if frm is not valid for
>>     vector floating-point instructions.
>>   * rebase on riscv-to-apply.next.
>>
>> v4
>>   * remove explicit float flmul variable in DisasContext.
>>   * replace floating-point calculations with shift operations to
>>     improve performance.
>>   * relax RV_VLEN_MAX to 512-bits.
>>
>> v3
>>   * apply nan-box helpers from Richard Henderson.
>>   * remove fp16 api changes as they are sent independently in another
>>     pathcset by Chih-Min Chao.
>>   * remove all tail elements clear functions as tail elements can
>>     retain unchanged for either VTA set to undisturbed or agnostic.
>>   * add fp16 nan-box check generator function.
>>   * add floating-point rounding mode enum.
>>   * replace flmul arithmetic with shifts to avoid floating-point
>>     conversions.
>>   * add Zvqmac extension.
>>   * replace gdbstub vector register xml files with dynamic generator.
>>   * bumped to RVV v1.0.
>>   * RVV v1.0 related changes:
>>     * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register
>>       load/store instructions
>>     * add vrgatherei16 instruction.
>>     * rearranged bits in vtype to make vlmul bits into a contiguous
>>       field.
>>
>> v2
>>   * drop v0.7.1 support.
>>   * replace invisible return check macros with functions.
>>   * move mark_vs_dirty() to translators.
>>   * add SSTATUS_VS flag for s-mode.
>>   * nan-box scalar fp register for floating-point operations.
>>   * add gdbstub files for vector registers to allow system-mode
>>     debugging with GDB.
>>
>> Based-on: <20200909001647.532249-1-richard.henderson@linaro.org/>
>> Based-on: <1596102747-20226-1-git-send-email-chihmin.chao@sifive.com/>
>>
>> Frank Chang (62):
>>   target/riscv: drop vector 0.7.1 and add 1.0 support
>>   target/riscv: Use FIELD_EX32() to extract wd field
>>   target/riscv: rvv-1.0: introduce writable misa.v field
>>   target/riscv: rvv-1.0: add translation-time vector context status
>>   target/riscv: rvv-1.0: remove rvv related codes from fcsr registers
>>   target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr
>>     registers
>>   target/riscv: rvv-1.0: remove MLEN calculations
>>   target/riscv: rvv-1.0: add fractional LMUL
>>   target/riscv: rvv-1.0: add VMA and VTA
>>   target/riscv: rvv-1.0: update check functions
>>   target/riscv: introduce more imm value modes in translator functions
>>   target/riscv: rvv:1.0: add translation-time nan-box helper function
>>   target/riscv: rvv-1.0: configure instructions
>>   target/riscv: rvv-1.0: stride load and store instructions
>>   target/riscv: rvv-1.0: index load and store instructions
>>   target/riscv: rvv-1.0: fix address index overflow bug of indexed
>>     load/store insns
>>   target/riscv: rvv-1.0: fault-only-first unit stride load
>>   target/riscv: rvv-1.0: amo operations
>>   target/riscv: rvv-1.0: load/store whole register instructions
>>   target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
>>   target/riscv: rvv-1.0: take fractional LMUL into vector max elements
>>     calculation
>>   target/riscv: rvv-1.0: floating-point square-root instruction
>>   target/riscv: rvv-1.0: floating-point classify instructions
>>   target/riscv: rvv-1.0: mask population count instruction
>>   target/riscv: rvv-1.0: find-first-set mask bit instruction
>>   target/riscv: rvv-1.0: set-X-first mask bit instructions
>>   target/riscv: rvv-1.0: iota instruction
>>   target/riscv: rvv-1.0: element index instruction
>>   target/riscv: rvv-1.0: allow load element with sign-extended
>>   target/riscv: rvv-1.0: register gather instructions
>>   target/riscv: rvv-1.0: integer scalar move instructions
>>   target/riscv: rvv-1.0: floating-point move instruction
>>   target/riscv: rvv-1.0: floating-point scalar move instructions
>>   target/riscv: rvv-1.0: whole register move instructions
>>   target/riscv: rvv-1.0: integer extension instructions
>>   target/riscv: rvv-1.0: single-width averaging add and subtract
>>     instructions
>>   target/riscv: rvv-1.0: single-width bit shift instructions
>>   target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
>>   target/riscv: rvv-1.0: narrowing integer right shift instructions
>>   target/riscv: rvv-1.0: widening integer multiply-add instructions
>>   target/riscv: rvv-1.0: single-width saturating add and subtract
>>     instructions
>>   target/riscv: rvv-1.0: integer comparison instructions
>>   target/riscv: rvv-1.0: floating-point compare instructions
>>   target/riscv: rvv-1.0: mask-register logical instructions
>>   target/riscv: rvv-1.0: slide instructions
>>   target/riscv: rvv-1.0: floating-point slide instructions
>>   target/riscv: rvv-1.0: narrowing fixed-point clip instructions
>>   target/riscv: rvv-1.0: single-width floating-point reduction
>>   target/riscv: rvv-1.0: widening floating-point reduction instructions
>>   target/riscv: rvv-1.0: single-width scaling shift instructions
>>   target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
>>   target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
>>   target/riscv: rvv-1.0: remove integer extract instruction
>>   target/riscv: rvv-1.0: floating-point min/max instructions
>>   target/riscv: introduce floating-point rounding mode enum
>>   target/riscv: rvv-1.0: floating-point/integer type-convert
>>     instructions
>>   target/riscv: rvv-1.0: widening floating-point/integer type-convert
>>   target/riscv: add "set round to odd" rounding mode helper function
>>   target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
>>   target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
>>   target/riscv: implement vstart CSR
>>   target/riscv: trigger illegal instruction exception if frm is not
>>     valid
>>
>> Greentime Hu (1):
>>   target/riscv: rvv-1.0: add vlenb register
>>
>> Hsiangkai Wang (2):
>>   target/riscv: gdb: modify gdb csr xml file to align with csr register
>>     map
>>   target/riscv: gdb: support vector registers for rv64 & rv32
>>
>> LIU Zhiwei (3):
>>   target/riscv: rvv-1.0: add mstatus VS field
>>   target/riscv: rvv-1.0: add sstatus VS field
>>   target/riscv: rvv-1.0: add vcsr register
>>
>>  gdb-xml/riscv-32bit-csr.xml             |   18 +-
>>  gdb-xml/riscv-64bit-csr.xml             |   18 +-
>>  target/riscv/cpu.c                      |   11 +-
>>  target/riscv/cpu.h                      |   95 +-
>>  target/riscv/cpu_bits.h                 |   10 +
>>  target/riscv/cpu_helper.c               |   16 +-
>>  target/riscv/csr.c                      |   79 +-
>>  target/riscv/fpu_helper.c               |   17 +-
>>  target/riscv/gdbstub.c                  |  172 +-
>>  target/riscv/helper.h                   |  495 ++--
>>  target/riscv/insn32-64.decode           |   18 +-
>>  target/riscv/insn32.decode              |  288 +-
>>  target/riscv/insn_trans/trans_rvv.c.inc | 2430 +++++++++++------
>>  target/riscv/internals.h                |   22 +-
>>  target/riscv/translate.c                |   72 +-
>>  target/riscv/vector_helper.c            | 3316 +++++++++++------------
>>  16 files changed, 4118 insertions(+), 2959 deletions(-)
>>
>> --
>> 2.17.1
>>
>>
> ping~
>

[-- Attachment #2: Type: text/html, Size: 9914 bytes --]