* [PATCH v4 01/45] Split out common part of BCM283X classes
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 15:58 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 02/45] Split out common part of peripherals Sergey Kambalin
` (45 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Pre setup for BCM2838 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2836.c | 102 ++++++++++++++++++++++-----------------
hw/arm/raspi.c | 2 +-
include/hw/arm/bcm2836.h | 26 +++++++++-
3 files changed, 83 insertions(+), 47 deletions(-)
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 166dc896c0..66a2b57b38 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -29,12 +29,12 @@ struct BCM283XClass {
};
static Property bcm2836_enabled_cores_property =
- DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0);
+ DEFINE_PROP_UINT32("enabled-cpus", BCM283XBaseState, enabled_cpus, 0);
-static void bcm2836_init(Object *obj)
+static void bcm283x_base_init(Object *obj)
{
- BCM283XState *s = BCM283X(obj);
- BCM283XClass *bc = BCM283X_GET_CLASS(obj);
+ BCM283XBaseState *s = BCM283X_BASE(obj);
+ BCM283XBaseClass *bc = BCM283X_BASE_GET_CLASS(obj);
int n;
for (n = 0; n < bc->core_count; n++) {
@@ -50,6 +50,11 @@ static void bcm2836_init(Object *obj)
object_initialize_child(obj, "control", &s->control,
TYPE_BCM2836_CONTROL);
}
+}
+
+static void bcm283x_init(Object *obj)
+{
+ BCM283XState *s = BCM283X(obj);
object_initialize_child(obj, "peripherals", &s->peripherals,
TYPE_BCM2835_PERIPHERALS);
@@ -61,10 +66,11 @@ static void bcm2836_init(Object *obj)
"vcram-size");
}
-static bool bcm283x_common_realize(DeviceState *dev, Error **errp)
+bool bcm283x_common_realize(DeviceState *dev, Error **errp)
{
BCM283XState *s = BCM283X(dev);
- BCM283XClass *bc = BCM283X_GET_CLASS(dev);
+ BCM283XBaseState *s_base = BCM283X_BASE(dev);
+ BCM283XBaseClass *bc = BCM283X_BASE_GET_CLASS(dev);
Object *obj;
/* common peripherals from bcm2835 */
@@ -77,96 +83,98 @@ static bool bcm283x_common_realize(DeviceState *dev, Error **errp)
return false;
}
- object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals),
- "sd-bus");
+ object_property_add_alias(OBJECT(s_base), "sd-bus",
+ OBJECT(&s->peripherals), "sd-bus");
- sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
- bc->peri_base, 1);
+ sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals),
+ 0, bc->peri_base, 1);
return true;
}
static void bcm2835_realize(DeviceState *dev, Error **errp)
{
BCM283XState *s = BCM283X(dev);
+ BCM283XBaseState *s_base = BCM283X_BASE(dev);
if (!bcm283x_common_realize(dev, errp)) {
return;
}
- if (!qdev_realize(DEVICE(&s->cpu[0].core), NULL, errp)) {
+ if (!qdev_realize(DEVICE(&s_base->cpu[0].core), NULL, errp)) {
return;
}
/* Connect irq/fiq outputs from the interrupt controller. */
sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
- qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_IRQ));
+ qdev_get_gpio_in(DEVICE(&s_base->cpu[0].core), ARM_CPU_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
- qdev_get_gpio_in(DEVICE(&s->cpu[0].core), ARM_CPU_FIQ));
+ qdev_get_gpio_in(DEVICE(&s_base->cpu[0].core), ARM_CPU_FIQ));
}
static void bcm2836_realize(DeviceState *dev, Error **errp)
{
- BCM283XState *s = BCM283X(dev);
- BCM283XClass *bc = BCM283X_GET_CLASS(dev);
int n;
+ BCM283XState *s = BCM283X(dev);
+ BCM283XBaseState *s_base = BCM283X_BASE(dev);
+ BCM283XBaseClass *bc = BCM283X_BASE_GET_CLASS(dev);
if (!bcm283x_common_realize(dev, errp)) {
return;
}
/* bcm2836 interrupt controller (and mailboxes, etc.) */
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->control), errp)) {
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s_base->control), errp)) {
return;
}
- sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, bc->ctrl_base);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s_base->control), 0, bc->ctrl_base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
- qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "gpu-irq", 0));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
- qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "gpu-fiq", 0));
for (n = 0; n < BCM283X_NCPUS; n++) {
/* TODO: this should be converted to a property of ARM_CPU */
- s->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n;
+ s_base->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n;
/* set periphbase/CBAR value for CPU-local registers */
- if (!object_property_set_int(OBJECT(&s->cpu[n].core), "reset-cbar",
+ if (!object_property_set_int(OBJECT(&s_base->cpu[n].core), "reset-cbar",
bc->peri_base, errp)) {
return;
}
/* start powered off if not enabled */
- if (!object_property_set_bool(OBJECT(&s->cpu[n].core),
+ if (!object_property_set_bool(OBJECT(&s_base->cpu[n].core),
"start-powered-off",
- n >= s->enabled_cpus,
+ n >= s_base->enabled_cpus,
errp)) {
return;
}
- if (!qdev_realize(DEVICE(&s->cpu[n].core), NULL, errp)) {
+ if (!qdev_realize(DEVICE(&s_base->cpu[n].core), NULL, errp)) {
return;
}
/* Connect irq/fiq outputs from the interrupt controller. */
- qdev_connect_gpio_out_named(DEVICE(&s->control), "irq", n,
- qdev_get_gpio_in(DEVICE(&s->cpu[n].core), ARM_CPU_IRQ));
- qdev_connect_gpio_out_named(DEVICE(&s->control), "fiq", n,
- qdev_get_gpio_in(DEVICE(&s->cpu[n].core), ARM_CPU_FIQ));
+ qdev_connect_gpio_out_named(DEVICE(&s_base->control), "irq", n,
+ qdev_get_gpio_in(DEVICE(&s_base->cpu[n].core), ARM_CPU_IRQ));
+ qdev_connect_gpio_out_named(DEVICE(&s_base->control), "fiq", n,
+ qdev_get_gpio_in(DEVICE(&s_base->cpu[n].core), ARM_CPU_FIQ));
/* Connect timers from the CPU to the interrupt controller */
- qdev_connect_gpio_out(DEVICE(&s->cpu[n].core), GTIMER_PHYS,
- qdev_get_gpio_in_named(DEVICE(&s->control), "cntpnsirq", n));
- qdev_connect_gpio_out(DEVICE(&s->cpu[n].core), GTIMER_VIRT,
- qdev_get_gpio_in_named(DEVICE(&s->control), "cntvirq", n));
- qdev_connect_gpio_out(DEVICE(&s->cpu[n].core), GTIMER_HYP,
- qdev_get_gpio_in_named(DEVICE(&s->control), "cnthpirq", n));
- qdev_connect_gpio_out(DEVICE(&s->cpu[n].core), GTIMER_SEC,
- qdev_get_gpio_in_named(DEVICE(&s->control), "cntpsirq", n));
+ qdev_connect_gpio_out(DEVICE(&s_base->cpu[n].core), GTIMER_PHYS,
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "cntpnsirq", n));
+ qdev_connect_gpio_out(DEVICE(&s_base->cpu[n].core), GTIMER_VIRT,
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "cntvirq", n));
+ qdev_connect_gpio_out(DEVICE(&s_base->cpu[n].core), GTIMER_HYP,
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "cnthpirq", n));
+ qdev_connect_gpio_out(DEVICE(&s_base->cpu[n].core), GTIMER_SEC,
+ qdev_get_gpio_in_named(DEVICE(&s_base->control), "cntpsirq", n));
}
}
-static void bcm283x_class_init(ObjectClass *oc, void *data)
+static void bcm283x_base_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
@@ -177,7 +185,7 @@ static void bcm283x_class_init(ObjectClass *oc, void *data)
static void bcm2835_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
- BCM283XClass *bc = BCM283X_CLASS(oc);
+ BCM283XBaseClass *bc = BCM283X_BASE_CLASS(oc);
bc->cpu_type = ARM_CPU_TYPE_NAME("arm1176");
bc->core_count = 1;
@@ -188,7 +196,7 @@ static void bcm2835_class_init(ObjectClass *oc, void *data)
static void bcm2836_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
- BCM283XClass *bc = BCM283X_CLASS(oc);
+ BCM283XBaseClass *bc = BCM283X_BASE_CLASS(oc);
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7");
bc->core_count = BCM283X_NCPUS;
@@ -202,7 +210,7 @@ static void bcm2836_class_init(ObjectClass *oc, void *data)
static void bcm2837_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
- BCM283XClass *bc = BCM283X_CLASS(oc);
+ BCM283XBaseClass *bc = BCM283X_BASE_CLASS(oc);
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
bc->core_count = BCM283X_NCPUS;
@@ -230,11 +238,17 @@ static const TypeInfo bcm283x_types[] = {
#endif
}, {
.name = TYPE_BCM283X,
- .parent = TYPE_DEVICE,
+ .parent = TYPE_BCM283X_BASE,
.instance_size = sizeof(BCM283XState),
- .instance_init = bcm2836_init,
- .class_size = sizeof(BCM283XClass),
- .class_init = bcm283x_class_init,
+ .instance_init = bcm283x_init,
+ .abstract = true,
+ }, {
+ .name = TYPE_BCM283X_BASE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(BCM283XBaseState),
+ .instance_init = bcm283x_base_init,
+ .class_size = sizeof(BCM283XBaseClass),
+ .class_init = bcm283x_base_class_init,
.abstract = true,
}
};
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index cc4c4ec9bf..af866ebce2 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -252,7 +252,7 @@ static void setup_boot(MachineState *machine, RaspiProcessorId processor_id,
s->binfo.firmware_loaded = true;
}
- arm_load_kernel(&s->soc.cpu[0].core, machine, &s->binfo);
+ arm_load_kernel(&s->soc.parent_obj.cpu[0].core, machine, &s->binfo);
}
static void raspi_machine_init(MachineState *machine)
diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
index 6f90cabfa3..5a6717ca91 100644
--- a/include/hw/arm/bcm2836.h
+++ b/include/hw/arm/bcm2836.h
@@ -17,8 +17,10 @@
#include "target/arm/cpu.h"
#include "qom/object.h"
+#define TYPE_BCM283X_BASE "bcm283x-base"
+OBJECT_DECLARE_TYPE(BCM283XBaseState, BCM283XBaseClass, BCM283X_BASE)
#define TYPE_BCM283X "bcm283x"
-OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X)
+OBJECT_DECLARE_SIMPLE_TYPE(BCM283XState, BCM283X)
#define BCM283X_NCPUS 4
@@ -30,7 +32,7 @@ OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X)
#define TYPE_BCM2836 "bcm2836"
#define TYPE_BCM2837 "bcm2837"
-struct BCM283XState {
+struct BCM283XBaseState {
/*< private >*/
DeviceState parent_obj;
/*< public >*/
@@ -41,7 +43,27 @@ struct BCM283XState {
ARMCPU core;
} cpu[BCM283X_NCPUS];
BCM2836ControlState control;
+};
+
+struct BCM283XBaseClass {
+ /*< private >*/
+ DeviceClass parent_class;
+ /*< public >*/
+ const char *name;
+ const char *cpu_type;
+ unsigned core_count;
+ hwaddr peri_base; /* Peripheral base address seen by the CPU */
+ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */
+ int clusterid;
+};
+
+struct BCM283XState {
+ /*< private >*/
+ BCM283XBaseState parent_obj;
+ /*< public >*/
BCM2835PeripheralState peripherals;
};
+bool bcm283x_common_realize(DeviceState *dev, Error **errp);
+
#endif /* BCM2836_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 02/45] Split out common part of peripherals
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 01/45] Split out common part of BCM283X classes Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 15:58 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 03/45] Split out raspi machine common part Sergey Kambalin
` (44 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Pre-setup for BCM2838 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2835_peripherals.c | 198 +++++++++++++++------------
hw/arm/bcm2836.c | 24 ++--
include/hw/arm/bcm2835_peripherals.h | 29 +++-
include/hw/arm/bcm2836.h | 3 +-
4 files changed, 154 insertions(+), 100 deletions(-)
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 0233038b95..fd70cde123 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -30,9 +30,9 @@
#define SEPARATE_DMA_IRQ_MAX 10
#define ORGATED_DMA_IRQ_COUNT 4
-static void create_unimp(BCM2835PeripheralState *ps,
- UnimplementedDeviceState *uds,
- const char *name, hwaddr ofs, hwaddr size)
+void create_unimp(BCMSocPeripheralBaseState *ps,
+ UnimplementedDeviceState *uds,
+ const char *name, hwaddr ofs, hwaddr size)
{
object_initialize_child(OBJECT(ps), name, uds, TYPE_UNIMPLEMENTED_DEVICE);
qdev_prop_set_string(DEVICE(uds), "name", name);
@@ -45,9 +45,36 @@ static void create_unimp(BCM2835PeripheralState *ps,
static void bcm2835_peripherals_init(Object *obj)
{
BCM2835PeripheralState *s = BCM2835_PERIPHERALS(obj);
+ BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(obj);
+
+ /* Random Number Generator */
+ object_initialize_child(obj, "rng", &s->rng, TYPE_BCM2835_RNG);
+
+ /* Thermal */
+ object_initialize_child(obj, "thermal", &s->thermal, TYPE_BCM2835_THERMAL);
+
+ /* GPIO */
+ object_initialize_child(obj, "gpio", &s->gpio, TYPE_BCM2835_GPIO);
+
+ object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci",
+ OBJECT(&s_base->sdhci.sdbus));
+ object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
+ OBJECT(&s_base->sdhost.sdbus));
+
+ /* Gated DMA interrupts */
+ object_initialize_child(obj, "orgated-dma-irq",
+ &s_base->orgated_dma_irq, TYPE_OR_IRQ);
+ object_property_set_int(OBJECT(&s_base->orgated_dma_irq), "num-lines",
+ ORGATED_DMA_IRQ_COUNT, &error_abort);
+}
+
+static void raspi_peripherals_base_init(Object *obj)
+{
+ BCMSocPeripheralBaseState *s = BCM_SOC_PERIPHERALS_BASE(obj);
+ BCMSocPeripheralBaseClass *bc = BCM_SOC_PERIPHERALS_BASE_GET_CLASS(obj);
/* Memory region for peripheral devices, which we export to our parent */
- memory_region_init(&s->peri_mr, obj,"bcm2835-peripherals", 0x1000000);
+ memory_region_init(&s->peri_mr, obj, "bcm2835-peripherals", bc->peri_size);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_mr);
/* Internal memory region for peripheral bus addresses (not exported) */
@@ -98,9 +125,6 @@ static void bcm2835_peripherals_init(Object *obj)
object_property_add_const_link(OBJECT(&s->property), "dma-mr",
OBJECT(&s->gpu_bus_mr));
- /* Random Number Generator */
- object_initialize_child(obj, "rng", &s->rng, TYPE_BCM2835_RNG);
-
/* Extended Mass Media Controller */
object_initialize_child(obj, "sdhci", &s->sdhci, TYPE_SYSBUS_SDHCI);
@@ -110,25 +134,9 @@ static void bcm2835_peripherals_init(Object *obj)
/* DMA Channels */
object_initialize_child(obj, "dma", &s->dma, TYPE_BCM2835_DMA);
- object_initialize_child(obj, "orgated-dma-irq",
- &s->orgated_dma_irq, TYPE_OR_IRQ);
- object_property_set_int(OBJECT(&s->orgated_dma_irq), "num-lines",
- ORGATED_DMA_IRQ_COUNT, &error_abort);
-
object_property_add_const_link(OBJECT(&s->dma), "dma-mr",
OBJECT(&s->gpu_bus_mr));
- /* Thermal */
- object_initialize_child(obj, "thermal", &s->thermal, TYPE_BCM2835_THERMAL);
-
- /* GPIO */
- object_initialize_child(obj, "gpio", &s->gpio, TYPE_BCM2835_GPIO);
-
- object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci",
- OBJECT(&s->sdhci.sdbus));
- object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
- OBJECT(&s->sdhost.sdbus));
-
/* Mphi */
object_initialize_child(obj, "mphi", &s->mphi, TYPE_BCM2835_MPHI);
@@ -148,7 +156,72 @@ static void bcm2835_peripherals_init(Object *obj)
static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
{
+ MemoryRegion *mphi_mr;
BCM2835PeripheralState *s = BCM2835_PERIPHERALS(dev);
+ BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
+ int n;
+
+ bcm_soc_peripherals_common_realize(dev, errp);
+
+ /* Extended Mass Media Controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->sdhci), 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
+ INTERRUPT_ARASANSDIO));
+
+ /* Connect DMA 0-12 to the interrupt controller */
+ for (n = 0; n <= SEPARATE_DMA_IRQ_MAX; n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ INTERRUPT_DMA0 + n));
+ }
+
+ if (!qdev_realize(DEVICE(&s_base->orgated_dma_irq), NULL, errp)) {
+ return;
+ }
+ for (n = 0; n < ORGATED_DMA_IRQ_COUNT; n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma),
+ SEPARATE_DMA_IRQ_MAX + 1 + n,
+ qdev_get_gpio_in(DEVICE(&s_base->orgated_dma_irq), n));
+ }
+ qdev_connect_gpio_out(DEVICE(&s_base->orgated_dma_irq), 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ INTERRUPT_DMA0 + SEPARATE_DMA_IRQ_MAX + 1));
+
+ /* Random Number Generator */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng), errp)) {
+ return;
+ }
+ memory_region_add_subregion(
+ &s_base->peri_mr, RNG_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0));
+
+ /* THERMAL */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->thermal), errp)) {
+ return;
+ }
+ memory_region_add_subregion(&s_base->peri_mr, THERMAL_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->thermal), 0));
+
+ /* Map MPHI to the peripherals memory map */
+ mphi_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s_base->mphi), 0);
+ memory_region_add_subregion(&s_base->peri_mr, MPHI_OFFSET, mphi_mr);
+
+ /* GPIO */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
+ return;
+ }
+ memory_region_add_subregion(
+ &s_base->peri_mr, GPIO_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
+
+ object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
+}
+
+void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp)
+{
+ BCMSocPeripheralBaseState *s = BCM_SOC_PERIPHERALS_BASE(dev);
Object *obj;
MemoryRegion *ram;
Error *err = NULL;
@@ -281,14 +354,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->property), 0,
qdev_get_gpio_in(DEVICE(&s->mboxes), MBOX_CHAN_PROPERTY));
- /* Random Number Generator */
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng), errp)) {
- return;
- }
-
- memory_region_add_subregion(&s->peri_mr, RNG_OFFSET,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0));
-
/* Extended Mass Media Controller
*
* Compatible with:
@@ -311,9 +376,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(&s->peri_mr, EMMC1_OFFSET,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhci), 0));
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
- qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
- INTERRUPT_ARASANSDIO));
/* SDHOST */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhost), errp)) {
@@ -336,49 +398,11 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(&s->peri_mr, DMA15_OFFSET,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dma), 1));
- for (n = 0; n <= SEPARATE_DMA_IRQ_MAX; n++) {
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), n,
- qdev_get_gpio_in_named(DEVICE(&s->ic),
- BCM2835_IC_GPU_IRQ,
- INTERRUPT_DMA0 + n));
- }
- if (!qdev_realize(DEVICE(&s->orgated_dma_irq), NULL, errp)) {
- return;
- }
- for (n = 0; n < ORGATED_DMA_IRQ_COUNT; n++) {
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma),
- SEPARATE_DMA_IRQ_MAX + 1 + n,
- qdev_get_gpio_in(DEVICE(&s->orgated_dma_irq), n));
- }
- qdev_connect_gpio_out(DEVICE(&s->orgated_dma_irq), 0,
- qdev_get_gpio_in_named(DEVICE(&s->ic),
- BCM2835_IC_GPU_IRQ,
- INTERRUPT_DMA0 + SEPARATE_DMA_IRQ_MAX + 1));
-
- /* THERMAL */
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->thermal), errp)) {
- return;
- }
- memory_region_add_subregion(&s->peri_mr, THERMAL_OFFSET,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->thermal), 0));
-
- /* GPIO */
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
- return;
- }
-
- memory_region_add_subregion(&s->peri_mr, GPIO_OFFSET,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
-
- object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
-
/* Mphi */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->mphi), errp)) {
return;
}
- memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0,
qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
INTERRUPT_HOSTPORT));
@@ -421,21 +445,27 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
+ BCMSocPeripheralBaseClass *bc = BCM_SOC_PERIPHERALS_BASE_CLASS(oc);
+ bc->peri_size = 0x1000000;
dc->realize = bcm2835_peripherals_realize;
}
-static const TypeInfo bcm2835_peripherals_type_info = {
- .name = TYPE_BCM2835_PERIPHERALS,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(BCM2835PeripheralState),
- .instance_init = bcm2835_peripherals_init,
- .class_init = bcm2835_peripherals_class_init,
+static const TypeInfo bcm2835_peripherals_types[] = {
+ {
+ .name = TYPE_BCM2835_PERIPHERALS,
+ .parent = TYPE_BCM_SOC_PERIPHERALS_BASE,
+ .instance_size = sizeof(BCM2835PeripheralState),
+ .instance_init = bcm2835_peripherals_init,
+ .class_init = bcm2835_peripherals_class_init,
+ }, {
+ .name = TYPE_BCM_SOC_PERIPHERALS_BASE,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCMSocPeripheralBaseState),
+ .instance_init = raspi_peripherals_base_init,
+ .class_size = sizeof(BCMSocPeripheralBaseClass),
+ .abstract = true,
+ }
};
-static void bcm2835_peripherals_register_types(void)
-{
- type_register_static(&bcm2835_peripherals_type_info);
-}
-
-type_init(bcm2835_peripherals_register_types)
+DEFINE_TYPES(bcm2835_peripherals_types)
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 66a2b57b38..18675c896c 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -66,10 +66,10 @@ static void bcm283x_init(Object *obj)
"vcram-size");
}
-bool bcm283x_common_realize(DeviceState *dev, Error **errp)
+bool bcm283x_common_realize(DeviceState *dev, BCMSocPeripheralBaseState *ps,
+ Error **errp)
{
- BCM283XState *s = BCM283X(dev);
- BCM283XBaseState *s_base = BCM283X_BASE(dev);
+ BCM283XBaseState *s = BCM283X_BASE(dev);
BCM283XBaseClass *bc = BCM283X_BASE_GET_CLASS(dev);
Object *obj;
@@ -77,17 +77,15 @@ bool bcm283x_common_realize(DeviceState *dev, Error **errp)
obj = object_property_get_link(OBJECT(dev), "ram", &error_abort);
- object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj);
+ object_property_add_const_link(OBJECT(ps), "ram", obj);
- if (!sysbus_realize(SYS_BUS_DEVICE(&s->peripherals), errp)) {
+ if (!sysbus_realize(SYS_BUS_DEVICE(ps), errp)) {
return false;
}
- object_property_add_alias(OBJECT(s_base), "sd-bus",
- OBJECT(&s->peripherals), "sd-bus");
+ object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(ps), "sd-bus");
- sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals),
- 0, bc->peri_base, 1);
+ sysbus_mmio_map_overlap(SYS_BUS_DEVICE(ps), 0, bc->peri_base, 1);
return true;
}
@@ -95,8 +93,10 @@ static void bcm2835_realize(DeviceState *dev, Error **errp)
{
BCM283XState *s = BCM283X(dev);
BCM283XBaseState *s_base = BCM283X_BASE(dev);
+ BCMSocPeripheralBaseState *ps_base
+ = BCM_SOC_PERIPHERALS_BASE(&s->peripherals);
- if (!bcm283x_common_realize(dev, errp)) {
+ if (!bcm283x_common_realize(dev, ps_base, errp)) {
return;
}
@@ -117,8 +117,10 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
BCM283XState *s = BCM283X(dev);
BCM283XBaseState *s_base = BCM283X_BASE(dev);
BCM283XBaseClass *bc = BCM283X_BASE_GET_CLASS(dev);
+ BCMSocPeripheralBaseState *ps_base
+ = BCM_SOC_PERIPHERALS_BASE(&s->peripherals);
- if (!bcm283x_common_realize(dev, errp)) {
+ if (!bcm283x_common_realize(dev, ps_base, errp)) {
return;
}
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index d724a2fc28..2644735d52 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -34,10 +34,13 @@
#include "hw/misc/unimp.h"
#include "qom/object.h"
+#define TYPE_BCM_SOC_PERIPHERALS_BASE "bcm-soc-peripherals-base"
+OBJECT_DECLARE_TYPE(BCMSocPeripheralBaseState, BCMSocPeripheralBaseClass,
+ BCM_SOC_PERIPHERALS_BASE)
#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
OBJECT_DECLARE_SIMPLE_TYPE(BCM2835PeripheralState, BCM2835_PERIPHERALS)
-struct BCM2835PeripheralState {
+struct BCMSocPeripheralBaseState {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
@@ -59,12 +62,9 @@ struct BCM2835PeripheralState {
OrIRQState orgated_dma_irq;
BCM2835ICState ic;
BCM2835PropertyState property;
- BCM2835RngState rng;
BCM2835MboxState mboxes;
SDHCIState sdhci;
BCM2835SDHostState sdhost;
- BCM2835GpioState gpio;
- Bcm2835ThermalState thermal;
UnimplementedDeviceState i2s;
UnimplementedDeviceState spi[1];
UnimplementedDeviceState i2c[3];
@@ -78,4 +78,25 @@ struct BCM2835PeripheralState {
UnimplementedDeviceState sdramc;
};
+struct BCMSocPeripheralBaseClass {
+ /*< private >*/
+ SysBusDeviceClass parent_class;
+ /*< public >*/
+ uint64_t peri_size; /* Peripheral range size */
+};
+
+struct BCM2835PeripheralState {
+ /*< private >*/
+ BCMSocPeripheralBaseState parent_obj;
+ /*< public >*/
+ BCM2835RngState rng;
+ Bcm2835ThermalState thermal;
+ BCM2835GpioState gpio;
+};
+
+void create_unimp(BCMSocPeripheralBaseState *ps,
+ UnimplementedDeviceState *uds,
+ const char *name, hwaddr ofs, hwaddr size);
+void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp);
+
#endif /* BCM2835_PERIPHERALS_H */
diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
index 5a6717ca91..918fb3bf14 100644
--- a/include/hw/arm/bcm2836.h
+++ b/include/hw/arm/bcm2836.h
@@ -64,6 +64,7 @@ struct BCM283XState {
BCM2835PeripheralState peripherals;
};
-bool bcm283x_common_realize(DeviceState *dev, Error **errp);
+bool bcm283x_common_realize(DeviceState *dev, BCMSocPeripheralBaseState *ps,
+ Error **errp);
#endif /* BCM2836_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 03/45] Split out raspi machine common part
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 01/45] Split out common part of BCM283X classes Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 02/45] Split out common part of peripherals Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 15:59 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 04/45] Introduce BCM2838 SoC Sergey Kambalin
` (43 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Pre-setup for raspberry pi 4 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/raspi.c | 112 ++++++++++++++++++--------------
include/hw/arm/raspi_platform.h | 21 ++++++
2 files changed, 85 insertions(+), 48 deletions(-)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index af866ebce2..7d04734cd2 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -18,6 +18,7 @@
#include "qapi/error.h"
#include "hw/arm/boot.h"
#include "hw/arm/bcm2836.h"
+#include "hw/arm/raspi_platform.h"
#include "hw/registerfields.h"
#include "qemu/error-report.h"
#include "hw/boards.h"
@@ -25,6 +26,9 @@
#include "hw/arm/boot.h"
#include "qom/object.h"
+#define TYPE_RASPI_MACHINE MACHINE_TYPE_NAME("raspi-common")
+OBJECT_DECLARE_SIMPLE_TYPE(RaspiMachineState, RASPI_MACHINE)
+
#define SMPBOOT_ADDR 0x300 /* this should leave enough space for ATAGS */
#define MVBAR_ADDR 0x400 /* secure vectors */
#define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */
@@ -37,25 +41,10 @@
struct RaspiMachineState {
/*< private >*/
- MachineState parent_obj;
+ RaspiBaseMachineState parent_obj;
/*< public >*/
BCM283XState soc;
- struct arm_boot_info binfo;
-};
-typedef struct RaspiMachineState RaspiMachineState;
-
-struct RaspiMachineClass {
- /*< private >*/
- MachineClass parent_obj;
- /*< public >*/
- uint32_t board_rev;
};
-typedef struct RaspiMachineClass RaspiMachineClass;
-
-#define TYPE_RASPI_MACHINE MACHINE_TYPE_NAME("raspi-common")
-DECLARE_OBJ_CHECKERS(RaspiMachineState, RaspiMachineClass,
- RASPI_MACHINE, TYPE_RASPI_MACHINE)
-
/*
* Board revision codes:
@@ -83,6 +72,11 @@ static const struct {
[PROCESSOR_ID_BCM2837] = {TYPE_BCM2837, BCM283X_NCPUS},
};
+static void raspi_base_machine_init(MachineState *machine,
+ BCM283XBaseState *soc);
+static void raspi_machine_class_common_init(MachineClass *mc,
+ uint32_t board_rev);
+
static uint64_t board_ram_size(uint32_t board_rev)
{
assert(FIELD_EX32(board_rev, REV_CODE, STYLE)); /* Only new style */
@@ -200,13 +194,12 @@ static void reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
cpu_set_pc(cs, info->smp_loader_start);
}
-static void setup_boot(MachineState *machine, RaspiProcessorId processor_id,
- size_t ram_size)
+static void setup_boot(MachineState *machine, ARMCPU *cpu,
+ RaspiProcessorId processor_id, size_t ram_size)
{
- RaspiMachineState *s = RASPI_MACHINE(machine);
+ RaspiBaseMachineState *s = RASPI_BASE_MACHINE(machine);
int r;
- s->binfo.board_id = MACH_TYPE_BCM2708;
s->binfo.ram_size = ram_size;
if (processor_id <= PROCESSOR_ID_BCM2836) {
@@ -252,13 +245,13 @@ static void setup_boot(MachineState *machine, RaspiProcessorId processor_id,
s->binfo.firmware_loaded = true;
}
- arm_load_kernel(&s->soc.parent_obj.cpu[0].core, machine, &s->binfo);
+ arm_load_kernel(cpu, machine, &s->binfo);
}
-static void raspi_machine_init(MachineState *machine)
+static void raspi_base_machine_init(MachineState *machine,
+ BCM283XBaseState *soc)
{
- RaspiMachineClass *mc = RASPI_MACHINE_GET_CLASS(machine);
- RaspiMachineState *s = RASPI_MACHINE(machine);
+ RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
uint32_t board_rev = mc->board_rev;
uint64_t ram_size = board_ram_size(board_rev);
uint32_t vcram_size;
@@ -279,19 +272,17 @@ static void raspi_machine_init(MachineState *machine)
machine->ram, 0);
/* Setup the SOC */
- object_initialize_child(OBJECT(machine), "soc", &s->soc,
- board_soc_type(board_rev));
- object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(machine->ram));
- object_property_set_int(OBJECT(&s->soc), "board-rev", board_rev,
+ object_property_add_const_link(OBJECT(soc), "ram", OBJECT(machine->ram));
+ object_property_set_int(OBJECT(soc), "board-rev", board_rev,
&error_abort);
- object_property_set_str(OBJECT(&s->soc), "command-line",
+ object_property_set_str(OBJECT(soc), "command-line",
machine->kernel_cmdline, &error_abort);
- qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
+ qdev_realize(DEVICE(soc), NULL, &error_fatal);
/* Create and plug in the SD cards */
di = drive_get(IF_SD, 0, 0);
blk = di ? blk_by_legacy_dinfo(di) : NULL;
- bus = qdev_get_child_bus(DEVICE(&s->soc), "sd-bus");
+ bus = qdev_get_child_bus(DEVICE(soc), "sd-bus");
if (bus == NULL) {
error_report("No SD bus found in SOC object");
exit(1);
@@ -300,19 +291,32 @@ static void raspi_machine_init(MachineState *machine)
qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
qdev_realize_and_unref(carddev, bus, &error_fatal);
- vcram_size = object_property_get_uint(OBJECT(&s->soc), "vcram-size",
+ vcram_size = object_property_get_uint(OBJECT(soc), "vcram-size",
&error_abort);
- setup_boot(machine, board_processor_id(mc->board_rev),
+ setup_boot(machine, &soc->cpu[0].core, board_processor_id(board_rev),
machine->ram_size - vcram_size);
}
-static void raspi_machine_class_common_init(MachineClass *mc,
- uint32_t board_rev)
+static void raspi_machine_init(MachineState *machine)
+{
+ RaspiMachineState *s = RASPI_MACHINE(machine);
+ RaspiBaseMachineState *s_base = RASPI_BASE_MACHINE(machine);
+ RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
+ BCM283XState *soc = &s->soc;
+
+ s_base->binfo.board_id = MACH_TYPE_BCM2708;
+
+ object_initialize_child(OBJECT(machine), "soc", soc,
+ board_soc_type(mc->board_rev));
+ raspi_base_machine_init(machine, &soc->parent_obj);
+}
+
+void raspi_machine_class_common_init(MachineClass *mc,
+ uint32_t board_rev)
{
mc->desc = g_strdup_printf("Raspberry Pi %s (revision 1.%u)",
board_type(board_rev),
FIELD_EX32(board_rev, REV_CODE, REVISION));
- mc->init = raspi_machine_init;
mc->block_default_type = IF_SD;
mc->no_parallel = 1;
mc->no_floppy = 1;
@@ -322,50 +326,57 @@ static void raspi_machine_class_common_init(MachineClass *mc,
mc->default_ram_id = "ram";
};
+static void raspi_machine_class_init(MachineClass *mc,
+ uint32_t board_rev)
+{
+ raspi_machine_class_common_init(mc, board_rev);
+ mc->init = raspi_machine_init;
+};
+
static void raspi0_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
- RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
rmc->board_rev = 0x920092; /* Revision 1.2 */
- raspi_machine_class_common_init(mc, rmc->board_rev);
+ raspi_machine_class_init(mc, rmc->board_rev);
};
static void raspi1ap_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
- RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
rmc->board_rev = 0x900021; /* Revision 1.1 */
- raspi_machine_class_common_init(mc, rmc->board_rev);
+ raspi_machine_class_init(mc, rmc->board_rev);
};
static void raspi2b_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
- RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
rmc->board_rev = 0xa21041;
- raspi_machine_class_common_init(mc, rmc->board_rev);
+ raspi_machine_class_init(mc, rmc->board_rev);
};
#ifdef TARGET_AARCH64
static void raspi3ap_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
- RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
rmc->board_rev = 0x9020e0; /* Revision 1.0 */
- raspi_machine_class_common_init(mc, rmc->board_rev);
+ raspi_machine_class_init(mc, rmc->board_rev);
};
static void raspi3b_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
- RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
rmc->board_rev = 0xa02082;
- raspi_machine_class_common_init(mc, rmc->board_rev);
+ raspi_machine_class_init(mc, rmc->board_rev);
};
#endif /* TARGET_AARCH64 */
@@ -394,9 +405,14 @@ static const TypeInfo raspi_machine_types[] = {
#endif
}, {
.name = TYPE_RASPI_MACHINE,
- .parent = TYPE_MACHINE,
+ .parent = TYPE_RASPI_BASE_MACHINE,
.instance_size = sizeof(RaspiMachineState),
- .class_size = sizeof(RaspiMachineClass),
+ .abstract = true,
+ }, {
+ .name = TYPE_RASPI_BASE_MACHINE,
+ .parent = TYPE_MACHINE,
+ .instance_size = sizeof(RaspiBaseMachineState),
+ .class_size = sizeof(RaspiBaseMachineClass),
.abstract = true,
}
};
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index ede98e63c3..3018e8fcf3 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -28,6 +28,27 @@
#ifndef HW_ARM_RASPI_PLATFORM_H
#define HW_ARM_RASPI_PLATFORM_H
+#include "hw/boards.h"
+#include "hw/arm/boot.h"
+
+#define TYPE_RASPI_BASE_MACHINE MACHINE_TYPE_NAME("raspi-base")
+OBJECT_DECLARE_TYPE(RaspiBaseMachineState, RaspiBaseMachineClass,
+ RASPI_BASE_MACHINE)
+
+struct RaspiBaseMachineState {
+ /*< private >*/
+ MachineState parent_obj;
+ /*< public >*/
+ struct arm_boot_info binfo;
+};
+
+struct RaspiBaseMachineClass {
+ /*< private >*/
+ MachineClass parent_obj;
+ /*< public >*/
+ uint32_t board_rev;
+};
+
#define MSYNC_OFFSET 0x0000 /* Multicore Sync Block */
#define CCPT_OFFSET 0x1000 /* Compact Camera Port 2 TX */
#define INTE_OFFSET 0x2000 /* VC Interrupt controller */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 04/45] Introduce BCM2838 SoC
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (2 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 03/45] Split out raspi machine common part Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:07 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 05/45] Add GIC-400 to " Sergey Kambalin
` (42 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838.c | 100 +++++++++++++++++++++++++++
hw/arm/bcm2838_peripherals.c | 72 +++++++++++++++++++
hw/arm/meson.build | 2 +
include/hw/arm/bcm2838.h | 29 ++++++++
include/hw/arm/bcm2838_peripherals.h | 36 ++++++++++
5 files changed, 239 insertions(+)
create mode 100644 hw/arm/bcm2838.c
create mode 100644 hw/arm/bcm2838_peripherals.c
create mode 100644 include/hw/arm/bcm2838.h
create mode 100644 include/hw/arm/bcm2838_peripherals.h
diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
new file mode 100644
index 0000000000..c61c59661b
--- /dev/null
+++ b/hw/arm/bcm2838.c
@@ -0,0 +1,100 @@
+/*
+ * BCM2838 SoC emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "hw/arm/raspi_platform.h"
+#include "hw/sysbus.h"
+#include "hw/arm/bcm2838.h"
+#include "trace.h"
+
+#define VIRTUAL_PMU_IRQ 7
+
+static void bcm2838_init(Object *obj)
+{
+ BCM2838State *s = BCM2838(obj);
+
+ object_initialize_child(obj, "peripherals", &s->peripherals,
+ TYPE_BCM2838_PERIPHERALS);
+ object_property_add_alias(obj, "board-rev", OBJECT(&s->peripherals),
+ "board-rev");
+ object_property_add_alias(obj, "vcram-size", OBJECT(&s->peripherals),
+ "vcram-size");
+ object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
+ "command-line");
+}
+
+static void bcm2838_realize(DeviceState *dev, Error **errp)
+{
+ int n;
+ BCM2838State *s = BCM2838(dev);
+ BCM283XBaseState *s_base = BCM283X_BASE(dev);
+ BCM283XBaseClass *bc_base = BCM283X_BASE_GET_CLASS(dev);
+ BCM2838PeripheralState *ps = BCM2838_PERIPHERALS(&s->peripherals);
+ BCMSocPeripheralBaseState *ps_base =
+ BCM_SOC_PERIPHERALS_BASE(&s->peripherals);
+
+ if (!bcm283x_common_realize(dev, ps_base, errp)) {
+ return;
+ }
+ sysbus_mmio_map_overlap(SYS_BUS_DEVICE(ps), 1, BCM2838_PERI_LOW_BASE, 1);
+
+ /* bcm2836 interrupt controller (and mailboxes, etc.) */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s_base->control), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s_base->control), 0, bc_base->ctrl_base);
+
+ /* Create cores */
+ for (n = 0; n < bc_base->core_count; n++) {
+ /* TODO: this should be converted to a property of ARM_CPU */
+ s_base->cpu[n].core.mp_affinity = (bc_base->clusterid << 8) | n;
+
+ /* start powered off if not enabled */
+ if (!object_property_set_bool(OBJECT(&s_base->cpu[n].core),
+ "start-powered-off",
+ n >= s_base->enabled_cpus,
+ errp)) {
+ return;
+ }
+
+ if (!qdev_realize(DEVICE(&s_base->cpu[n].core), NULL, errp)) {
+ return;
+ }
+ }
+}
+
+static void bcm2838_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ BCM283XBaseClass *bc_base = BCM283X_BASE_CLASS(oc);
+
+ bc_base->cpu_type = ARM_CPU_TYPE_NAME("cortex-a72");
+ bc_base->core_count = BCM283X_NCPUS;
+ bc_base->peri_base = 0xfe000000;
+ bc_base->ctrl_base = 0xff800000;
+ bc_base->clusterid = 0x0;
+ dc->realize = bcm2838_realize;
+}
+
+static const TypeInfo bcm2838_type = {
+ .name = TYPE_BCM2838,
+ .parent = TYPE_BCM283X_BASE,
+ .instance_size = sizeof(BCM2838State),
+ .instance_init = bcm2838_init,
+ .class_size = sizeof(BCM283XBaseClass),
+ .class_init = bcm2838_class_init,
+};
+
+static void bcm2838_register_types(void)
+{
+ type_register_static(&bcm2838_type);
+}
+
+type_init(bcm2838_register_types);
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
new file mode 100644
index 0000000000..06110c724f
--- /dev/null
+++ b/hw/arm/bcm2838_peripherals.c
@@ -0,0 +1,72 @@
+/*
+ * BCM2838 peripherals emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "hw/arm/raspi_platform.h"
+#include "hw/arm/bcm2838_peripherals.h"
+
+/* Lower peripheral base address on the VC (GPU) system bus */
+#define BCM2838_VC_PERI_LOW_BASE 0x7c000000
+
+static void bcm2838_peripherals_init(Object *obj)
+{
+ BCM2838PeripheralState *s = BCM2838_PERIPHERALS(obj);
+ BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_GET_CLASS(obj);
+
+ /* Lower memory region for peripheral devices (exported to the Soc) */
+ memory_region_init(&s->peri_low_mr, obj, "bcm2838-peripherals",
+ bc->peri_low_size);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
+
+}
+
+static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
+{
+ BCM2838PeripheralState *s = BCM2838_PERIPHERALS(dev);
+ BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
+
+ bcm_soc_peripherals_common_realize(dev, errp);
+
+ /* Map lower peripherals into the GPU address space */
+ memory_region_init_alias(&s->peri_low_mr_alias, OBJECT(s),
+ "bcm2838-peripherals", &s->peri_low_mr, 0,
+ memory_region_size(&s->peri_low_mr));
+ memory_region_add_subregion_overlap(&s_base->gpu_bus_mr,
+ BCM2838_VC_PERI_LOW_BASE,
+ &s->peri_low_mr_alias, 1);
+
+}
+
+static void bcm2838_peripherals_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_CLASS(oc);
+ BCMSocPeripheralBaseClass *bc_base = BCM_SOC_PERIPHERALS_BASE_CLASS(oc);
+
+ bc->peri_low_size = 0x2000000;
+ bc_base->peri_size = 0x1800000;
+ dc->realize = bcm2838_peripherals_realize;
+}
+
+static const TypeInfo bcm2838_peripherals_type_info = {
+ .name = TYPE_BCM2838_PERIPHERALS,
+ .parent = TYPE_BCM_SOC_PERIPHERALS_BASE,
+ .instance_size = sizeof(BCM2838PeripheralState),
+ .instance_init = bcm2838_peripherals_init,
+ .class_size = sizeof(BCM2838PeripheralClass),
+ .class_init = bcm2838_peripherals_class_init,
+};
+
+static void bcm2838_peripherals_register_types(void)
+{
+ type_register_static(&bcm2838_peripherals_type_info);
+}
+
+type_init(bcm2838_peripherals_register_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 68245d3ad1..551ab6abf5 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -39,6 +39,7 @@ arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubi
arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bananapi_m2u.c'))
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
+arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files('bcm2838.c'))
arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
@@ -69,6 +70,7 @@ arm_ss.add(when: 'CONFIG_XEN', if_true: files('xen_arm.c'))
system_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c'))
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c'))
+system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2838_peripherals.c'))
system_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c'))
hw_arch += {'arm': arm_ss}
diff --git a/include/hw/arm/bcm2838.h b/include/hw/arm/bcm2838.h
new file mode 100644
index 0000000000..bddc25ca9a
--- /dev/null
+++ b/include/hw/arm/bcm2838.h
@@ -0,0 +1,29 @@
+/*
+ * BCM2838 SoC emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef BCM2838_H
+#define BCM2838_H
+
+#include "hw/arm/bcm2836.h"
+#include "hw/arm/bcm2838_peripherals.h"
+
+#define BCM2838_PERI_LOW_BASE 0xfc000000
+#define BCM2838_GIC_BASE 0x40000
+
+#define TYPE_BCM2838 "bcm2838"
+
+OBJECT_DECLARE_TYPE(BCM2838State, BCM2838Class, BCM2838)
+
+struct BCM2838State {
+ /*< private >*/
+ BCM283XBaseState parent_obj;
+ /*< public >*/
+ BCM2838PeripheralState peripherals;
+};
+
+#endif /* BCM2838_H */
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
new file mode 100644
index 0000000000..7039b67cc9
--- /dev/null
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -0,0 +1,36 @@
+/*
+ * BCM2838 peripherals emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef BCM2838_PERIPHERALS_H
+#define BCM2838_PERIPHERALS_H
+
+#include "hw/arm/bcm2835_peripherals.h"
+
+
+#define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
+OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
+ BCM2838_PERIPHERALS)
+
+struct BCM2838PeripheralState {
+ /*< private >*/
+ BCMSocPeripheralBaseState parent_obj;
+
+ /*< public >*/
+ MemoryRegion peri_low_mr;
+ MemoryRegion peri_low_mr_alias;
+ MemoryRegion mphi_mr_alias;
+};
+
+struct BCM2838PeripheralClass {
+ /*< private >*/
+ BCMSocPeripheralBaseClass parent_class;
+ /*< public >*/
+ uint64_t peri_low_size; /* Peripheral lower range size */
+};
+
+#endif /* BCM2838_PERIPHERALS_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 04/45] Introduce BCM2838 SoC
2023-12-08 2:31 ` [PATCH v4 04/45] Introduce BCM2838 SoC Sergey Kambalin
@ 2023-12-18 16:07 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:07 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838.c | 100 +++++++++++++++++++++++++++
> hw/arm/bcm2838_peripherals.c | 72 +++++++++++++++++++
> hw/arm/meson.build | 2 +
> include/hw/arm/bcm2838.h | 29 ++++++++
> include/hw/arm/bcm2838_peripherals.h | 36 ++++++++++
> 5 files changed, 239 insertions(+)
> create mode 100644 hw/arm/bcm2838.c
> create mode 100644 hw/arm/bcm2838_peripherals.c
> create mode 100644 include/hw/arm/bcm2838.h
> create mode 100644 include/hw/arm/bcm2838_peripherals.h
>
> diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
> new file mode 100644
> index 0000000000..c61c59661b
> --- /dev/null
> +++ b/hw/arm/bcm2838.c
> @@ -0,0 +1,100 @@
> +/*
> + * BCM2838 SoC emulation
> + *
> + * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "qemu/module.h"
> +#include "hw/arm/raspi_platform.h"
> +#include "hw/sysbus.h"
> +#include "hw/arm/bcm2838.h"
> +#include "trace.h"
> +
> +#define VIRTUAL_PMU_IRQ 7
> +
> +static void bcm2838_init(Object *obj)
> +{
> + BCM2838State *s = BCM2838(obj);
> +
> + object_initialize_child(obj, "peripherals", &s->peripherals,
> + TYPE_BCM2838_PERIPHERALS);
> + object_property_add_alias(obj, "board-rev", OBJECT(&s->peripherals),
> + "board-rev");
> + object_property_add_alias(obj, "vcram-size", OBJECT(&s->peripherals),
> + "vcram-size");
> + object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
> + "command-line");
> +}
> +
> +static void bcm2838_realize(DeviceState *dev, Error **errp)
> +{
> + int n;
> + BCM2838State *s = BCM2838(dev);
> + BCM283XBaseState *s_base = BCM283X_BASE(dev);
> + BCM283XBaseClass *bc_base = BCM283X_BASE_GET_CLASS(dev);
> + BCM2838PeripheralState *ps = BCM2838_PERIPHERALS(&s->peripherals);
> + BCMSocPeripheralBaseState *ps_base =
> + BCM_SOC_PERIPHERALS_BASE(&s->peripherals);
> +
> + if (!bcm283x_common_realize(dev, ps_base, errp)) {
> + return;
> + }
> + sysbus_mmio_map_overlap(SYS_BUS_DEVICE(ps), 1, BCM2838_PERI_LOW_BASE, 1);
> +
> + /* bcm2836 interrupt controller (and mailboxes, etc.) */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s_base->control), errp)) {
> + return;
> + }
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s_base->control), 0, bc_base->ctrl_base);
> +
> + /* Create cores */
> + for (n = 0; n < bc_base->core_count; n++) {
> + /* TODO: this should be converted to a property of ARM_CPU */
> + s_base->cpu[n].core.mp_affinity = (bc_base->clusterid << 8) | n;
We have a property now, so we can do:
object_property_set_int(OBJECT(&s->cpu[n].core), "mp-affinity",
(bc->clusterid << 8) | n, &error_abort);
rather than propagating a TODO item.
https://lore.kernel.org/qemu-devel/20231123143813.42632-4-philmd@linaro.org/
is the patch (still pending) that does this in the existing rpi code.
> +
> + /* start powered off if not enabled */
> + if (!object_property_set_bool(OBJECT(&s_base->cpu[n].core),
> + "start-powered-off",
> + n >= s_base->enabled_cpus,
> + errp)) {
> + return;
> + }
Trying to set start-powered-off can never fail, so we don't need
to error-check it, but can just error_abort.
https://lore.kernel.org/qemu-devel/20231123143813.42632-5-philmd@linaro.org/
is the patch which does that for the existing uses.
> +
> + if (!qdev_realize(DEVICE(&s_base->cpu[n].core), NULL, errp)) {
> + return;
> + }
> + }
> +}
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 05/45] Add GIC-400 to BCM2838 SoC
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (3 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 04/45] Introduce BCM2838 SoC Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:23 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 06/45] Add BCM2838 GPIO stub Sergey Kambalin
` (41 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838.c | 167 +++++++++++++++++++++++++++
hw/arm/trace-events | 2 +
include/hw/arm/bcm2838.h | 2 +
include/hw/arm/bcm2838_peripherals.h | 39 +++++++
4 files changed, 210 insertions(+)
diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
index c61c59661b..042e543006 100644
--- a/hw/arm/bcm2838.c
+++ b/hw/arm/bcm2838.c
@@ -14,8 +14,36 @@
#include "hw/arm/bcm2838.h"
#include "trace.h"
+#define GIC400_MAINTAINANCE_IRQ 9
+#define GIC400_TIMER_NS_EL2_IRQ 10
+#define GIC400_TIMER_VIRT_IRQ 11
+#define GIC400_LEGACY_FIQ 12
+#define GIC400_TIMER_S_EL1_IRQ 13
+#define GIC400_TIMER_NS_EL1_IRQ 14
+#define GIC400_LEGACY_IRQ 15
+
+/* Number of external interrupt lines to configure the GIC with */
+#define GIC_NUM_IRQS 192
+
+#define PPI(cpu, irq) (GIC_NUM_IRQS + (cpu) * GIC_INTERNAL + GIC_NR_SGIS + irq)
+
+#define GIC_BASE_OFS 0x0000
+#define GIC_DIST_OFS 0x1000
+#define GIC_CPU_OFS 0x2000
+#define GIC_VIFACE_THIS_OFS 0x4000
+#define GIC_VIFACE_OTHER_OFS(cpu) (0x5000 + (cpu) * 0x200)
+#define GIC_VCPU_OFS 0x6000
+
#define VIRTUAL_PMU_IRQ 7
+static void bcm2838_gic_set_irq(void *opaque, int irq, int level)
+{
+ BCM2838State *s = (BCM2838State *)opaque;
+
+ trace_bcm2838_gic_set_irq(irq, level);
+ qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
+}
+
static void bcm2838_init(Object *obj)
{
BCM2838State *s = BCM2838(obj);
@@ -28,11 +56,14 @@ static void bcm2838_init(Object *obj)
"vcram-size");
object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
"command-line");
+
+ object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC);
}
static void bcm2838_realize(DeviceState *dev, Error **errp)
{
int n;
+ int int_n;
BCM2838State *s = BCM2838(dev);
BCM283XBaseState *s_base = BCM283X_BASE(dev);
BCM283XBaseClass *bc_base = BCM283X_BASE_GET_CLASS(dev);
@@ -56,6 +87,13 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
/* TODO: this should be converted to a property of ARM_CPU */
s_base->cpu[n].core.mp_affinity = (bc_base->clusterid << 8) | n;
+ /* set periphbase/CBAR value for CPU-local registers */
+ if (!object_property_set_int(OBJECT(&s_base->cpu[n].core), "reset-cbar",
+ bc_base->ctrl_base + BCM2838_GIC_BASE,
+ errp)) {
+ return;
+ }
+
/* start powered off if not enabled */
if (!object_property_set_bool(OBJECT(&s_base->cpu[n].core),
"start-powered-off",
@@ -68,6 +106,135 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
return;
}
}
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "revision", 2, errp)) {
+ return;
+ }
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "num-cpu", BCM283X_NCPUS,
+ errp)) {
+ return;
+ }
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "num-irq",
+ GIC_NUM_IRQS + GIC_INTERNAL, errp)) {
+ return;
+ }
+
+ if (!object_property_set_bool(OBJECT(&s->gic),
+ "has-virtualization-extensions", true,
+ errp)) {
+ return;
+ }
+
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) {
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_DIST_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_CPU_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VIFACE_THIS_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VCPU_OFS);
+
+ for (n = 0; n < BCM283X_NCPUS; n++) {
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 4 + n,
+ bc_base->ctrl_base + BCM2838_GIC_BASE
+ + GIC_VIFACE_OTHER_OFS(n));
+ }
+
+ DeviceState *gicdev = DEVICE(&s->gic);
+
+ for (n = 0; n < BCM283X_NCPUS; n++) {
+ DeviceState *cpudev = DEVICE(&s_base->cpu[n]);
+
+ /* Connect the GICv2 outputs to the CPU */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n,
+ qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 2 * BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 3 * BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 4 * BCM283X_NCPUS,
+ qdev_get_gpio_in(gicdev,
+ PPI(n, GIC400_MAINTAINANCE_IRQ)));
+
+ /* Connect timers from the CPU to the interrupt controller */
+ qdev_connect_gpio_out(cpudev, GTIMER_PHYS,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL1_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_VIRT,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_VIRT_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_HYP,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL2_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_SEC,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_S_EL1_IRQ)));
+ /* PMU interrupt */
+ qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+ qdev_get_gpio_in(gicdev, PPI(n, VIRTUAL_PMU_IRQ)));
+ }
+
+ /* Connect UART0 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->uart0), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_UART0));
+
+ /* Connect AUX / UART1 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->aux), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_AUX_UART1));
+
+ /* Connect VC mailbox to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mboxes), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MBOX));
+
+ /* Connect SD host to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->sdhost), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_SDHOST));
+
+ /* According to DTS, EMMC and EMMC2 share one irq */
+ DeviceState *mmc_irq_orgate = DEVICE(&ps->mmc_irq_orgate);
+
+ /* Connect EMMC and EMMC2 to the interrupt controller */
+ qdev_connect_gpio_out(mmc_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_EMMC_EMMC2));
+
+ /* Connect USB OTG and MPHI to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mphi), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MPHI));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
+
+ /* Connect DMA 0-6 to the interrupt controller */
+ for (int_n = GIC_SPI_INTERRUPT_DMA_0; int_n <= GIC_SPI_INTERRUPT_DMA_6;
+ int_n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dma),
+ int_n - GIC_SPI_INTERRUPT_DMA_0,
+ qdev_get_gpio_in(gicdev, int_n));
+ }
+
+ /* According to DTS, DMA 7 and 8 share one irq */
+ DeviceState *dma_7_8_irq_orgate = DEVICE(&ps->dma_7_8_irq_orgate);
+
+ /* Connect DMA 7-8 to the interrupt controller */
+ qdev_connect_gpio_out(dma_7_8_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_7_8));
+
+ /* According to DTS, DMA 9 and 10 share one irq */
+ DeviceState *dma_9_10_irq_orgate = DEVICE(&ps->dma_9_10_irq_orgate);
+
+ /* Connect DMA 9-10 to the interrupt controller */
+ qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_9_10));
+
+ /* Pass through inbound GPIO lines to the GIC */
+ qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
+
+ /* Pass through outbound IRQ lines from the GIC */
+ qdev_pass_gpios(DEVICE(&s->gic), DEVICE(&s->peripherals), NULL);
}
static void bcm2838_class_init(ObjectClass *oc, void *data)
diff --git a/hw/arm/trace-events b/hw/arm/trace-events
index cdc1ea06a8..4f0167e638 100644
--- a/hw/arm/trace-events
+++ b/hw/arm/trace-events
@@ -55,3 +55,5 @@ smmuv3_notify_flag_add(const char *iommu) "ADD SMMUNotifier node for iommu mr=%s
smmuv3_notify_flag_del(const char *iommu) "DEL SMMUNotifier node for iommu mr=%s"
smmuv3_inv_notifiers_iova(const char *name, uint16_t asid, uint16_t vmid, uint64_t iova, uint8_t tg, uint64_t num_pages) "iommu mr=%s asid=%d vmid=%d iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64
+# bcm2838.c
+bcm2838_gic_set_irq(int irq, int level) "gic irq:%d lvl:%d"
diff --git a/include/hw/arm/bcm2838.h b/include/hw/arm/bcm2838.h
index bddc25ca9a..e53c7bedf9 100644
--- a/include/hw/arm/bcm2838.h
+++ b/include/hw/arm/bcm2838.h
@@ -10,6 +10,7 @@
#define BCM2838_H
#include "hw/arm/bcm2836.h"
+#include "hw/intc/arm_gic.h"
#include "hw/arm/bcm2838_peripherals.h"
#define BCM2838_PERI_LOW_BASE 0xfc000000
@@ -24,6 +25,7 @@ struct BCM2838State {
BCM283XBaseState parent_obj;
/*< public >*/
BCM2838PeripheralState peripherals;
+ GICState gic;
};
#endif /* BCM2838_H */
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 7039b67cc9..5a72355183 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -11,6 +11,41 @@
#include "hw/arm/bcm2835_peripherals.h"
+#define GENET_OFFSET 0x1580000
+
+/* SPI */
+#define GIC_SPI_INTERRUPT_MBOX 33
+#define GIC_SPI_INTERRUPT_MPHI 40
+#define GIC_SPI_INTERRUPT_DWC2 73
+#define GIC_SPI_INTERRUPT_DMA_0 80
+#define GIC_SPI_INTERRUPT_DMA_6 86
+#define GIC_SPI_INTERRUPT_DMA_7_8 87
+#define GIC_SPI_INTERRUPT_DMA_9_10 88
+#define GIC_SPI_INTERRUPT_AUX_UART1 93
+#define GIC_SPI_INTERRUPT_SDHOST 120
+#define GIC_SPI_INTERRUPT_UART0 121
+#define GIC_SPI_INTERRUPT_RNG200 125
+#define GIC_SPI_INTERRUPT_EMMC_EMMC2 126
+#define GIC_SPI_INTERRUPT_PCI_INT_A 143
+#define GIC_SPI_INTERRUPT_GENET_A 157
+#define GIC_SPI_INTERRUPT_GENET_B 158
+
+
+/* GPU (legacy) DMA interrupts */
+#define GPU_INTERRUPT_DMA0 16
+#define GPU_INTERRUPT_DMA1 17
+#define GPU_INTERRUPT_DMA2 18
+#define GPU_INTERRUPT_DMA3 19
+#define GPU_INTERRUPT_DMA4 20
+#define GPU_INTERRUPT_DMA5 21
+#define GPU_INTERRUPT_DMA6 22
+#define GPU_INTERRUPT_DMA7_8 23
+#define GPU_INTERRUPT_DMA9_10 24
+#define GPU_INTERRUPT_DMA11 25
+#define GPU_INTERRUPT_DMA12 26
+#define GPU_INTERRUPT_DMA13 27
+#define GPU_INTERRUPT_DMA14 28
+#define GPU_INTERRUPT_DMA15 31
#define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
@@ -24,6 +59,10 @@ struct BCM2838PeripheralState {
MemoryRegion peri_low_mr;
MemoryRegion peri_low_mr_alias;
MemoryRegion mphi_mr_alias;
+
+ OrIRQState mmc_irq_orgate;
+ OrIRQState dma_7_8_irq_orgate;
+ OrIRQState dma_9_10_irq_orgate;
};
struct BCM2838PeripheralClass {
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 05/45] Add GIC-400 to BCM2838 SoC
2023-12-08 2:31 ` [PATCH v4 05/45] Add GIC-400 to " Sergey Kambalin
@ 2023-12-18 16:23 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:23 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:32, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838.c | 167 +++++++++++++++++++++++++++
> hw/arm/trace-events | 2 +
> include/hw/arm/bcm2838.h | 2 +
> include/hw/arm/bcm2838_peripherals.h | 39 +++++++
> 4 files changed, 210 insertions(+)
>
> diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
> index c61c59661b..042e543006 100644
> --- a/hw/arm/bcm2838.c
> +++ b/hw/arm/bcm2838.c
> @@ -14,8 +14,36 @@
> #include "hw/arm/bcm2838.h"
> #include "trace.h"
>
> +#define GIC400_MAINTAINANCE_IRQ 9
"MAINTENANCE"
> +#define GIC400_TIMER_NS_EL2_IRQ 10
> +#define GIC400_TIMER_VIRT_IRQ 11
> +#define GIC400_LEGACY_FIQ 12
> +#define GIC400_TIMER_S_EL1_IRQ 13
> +#define GIC400_TIMER_NS_EL1_IRQ 14
> +#define GIC400_LEGACY_IRQ 15
For the virt and sbsa-ref boards we found that having interrupt
#defines use the PPI number was on net a bit confusing, so we
standardized on having the defines be the architectural INTID
(which is the PPI number + 16). See commit 9036e917f8357f4.
But I mention this more as an FYI kind of thing because changing
the numbering base at this point is probably more likely to
introduce bugs than remove them...
> +/* Number of external interrupt lines to configure the GIC with */
> +#define GIC_NUM_IRQS 192
> +
> +#define PPI(cpu, irq) (GIC_NUM_IRQS + (cpu) * GIC_INTERNAL + GIC_NR_SGIS + irq)
> +
> +#define GIC_BASE_OFS 0x0000
> +#define GIC_DIST_OFS 0x1000
> +#define GIC_CPU_OFS 0x2000
> +#define GIC_VIFACE_THIS_OFS 0x4000
> +#define GIC_VIFACE_OTHER_OFS(cpu) (0x5000 + (cpu) * 0x200)
> +#define GIC_VCPU_OFS 0x6000
> +
> #define VIRTUAL_PMU_IRQ 7
>
> +static void bcm2838_gic_set_irq(void *opaque, int irq, int level)
> +{
> + BCM2838State *s = (BCM2838State *)opaque;
> +
> + trace_bcm2838_gic_set_irq(irq, level);
> + qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
> +}
> +
> static void bcm2838_init(Object *obj)
> {
> BCM2838State *s = BCM2838(obj);
> @@ -28,11 +56,14 @@ static void bcm2838_init(Object *obj)
> "vcram-size");
> object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
> "command-line");
> +
> + object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC);
> }
>
> static void bcm2838_realize(DeviceState *dev, Error **errp)
> {
> int n;
> + int int_n;
This is not a good name for a variable, especially in a
function that already has an "n" variable. As far as I can see
the use added here doesn't overlap with the existing "n" so
you could just reuse that.
Note that our coding style these days permits declaration of
loop variables inside the for():
for (int i = 0; i < ARRAY_SIZE(thing); i++) {
/* do something loopy */
}
so if you prefer you can have all the loops in the function do that
and not have any local n declared at the top of the function.
> BCM2838State *s = BCM2838(dev);
> BCM283XBaseState *s_base = BCM283X_BASE(dev);
> BCM283XBaseClass *bc_base = BCM283X_BASE_GET_CLASS(dev);
> @@ -56,6 +87,13 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
> /* TODO: this should be converted to a property of ARM_CPU */
> s_base->cpu[n].core.mp_affinity = (bc_base->clusterid << 8) | n;
>
> + /* set periphbase/CBAR value for CPU-local registers */
> + if (!object_property_set_int(OBJECT(&s_base->cpu[n].core), "reset-cbar",
> + bc_base->ctrl_base + BCM2838_GIC_BASE,
> + errp)) {
> + return;
> + }
This one doesn't need an error check either; compare
https://lore.kernel.org/qemu-devel/20231123143813.42632-3-philmd@linaro.org/
> +
> /* start powered off if not enabled */
> if (!object_property_set_bool(OBJECT(&s_base->cpu[n].core),
> "start-powered-off",
> @@ -68,6 +106,135 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
> return;
> }
> }
> +
> + if (!object_property_set_uint(OBJECT(&s->gic), "revision", 2, errp)) {
> + return;
> + }
> +
> + if (!object_property_set_uint(OBJECT(&s->gic), "num-cpu", BCM283X_NCPUS,
> + errp)) {
> + return;
> + }
> +
> + if (!object_property_set_uint(OBJECT(&s->gic), "num-irq",
> + GIC_NUM_IRQS + GIC_INTERNAL, errp)) {
> + return;
> + }
> +
> + if (!object_property_set_bool(OBJECT(&s->gic),
> + "has-virtualization-extensions", true,
> + errp)) {
> + return;
> + }
> +
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) {
> + return;
> + }
> +
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0,
> + bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_DIST_OFS);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1,
> + bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_CPU_OFS);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2,
> + bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VIFACE_THIS_OFS);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3,
> + bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VCPU_OFS);
> +
> + for (n = 0; n < BCM283X_NCPUS; n++) {
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 4 + n,
> + bc_base->ctrl_base + BCM2838_GIC_BASE
> + + GIC_VIFACE_OTHER_OFS(n));
> + }
> +
> + DeviceState *gicdev = DEVICE(&s->gic);
Our coding style says don't put declarations in the middle
of a code block. They should go at the start of blocks.
> +
> + for (n = 0; n < BCM283X_NCPUS; n++) {
> + DeviceState *cpudev = DEVICE(&s_base->cpu[n]);
> +
> + /* Connect the GICv2 outputs to the CPU */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n,
> + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + BCM283X_NCPUS,
> + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 2 * BCM283X_NCPUS,
> + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 3 * BCM283X_NCPUS,
> + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
> +
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 4 * BCM283X_NCPUS,
> + qdev_get_gpio_in(gicdev,
> + PPI(n, GIC400_MAINTAINANCE_IRQ)));
> +
> + /* Connect timers from the CPU to the interrupt controller */
> + qdev_connect_gpio_out(cpudev, GTIMER_PHYS,
> + qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL1_IRQ)));
> + qdev_connect_gpio_out(cpudev, GTIMER_VIRT,
> + qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_VIRT_IRQ)));
> + qdev_connect_gpio_out(cpudev, GTIMER_HYP,
> + qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL2_IRQ)));
> + qdev_connect_gpio_out(cpudev, GTIMER_SEC,
> + qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_S_EL1_IRQ)));
> + /* PMU interrupt */
> + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
> + qdev_get_gpio_in(gicdev, PPI(n, VIRTUAL_PMU_IRQ)));
> + }
> +
> + /* Connect UART0 to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->uart0), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_UART0));
> +
> + /* Connect AUX / UART1 to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->aux), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_AUX_UART1));
> +
> + /* Connect VC mailbox to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mboxes), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MBOX));
> +
> + /* Connect SD host to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->sdhost), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_SDHOST));
> +
> + /* According to DTS, EMMC and EMMC2 share one irq */
> + DeviceState *mmc_irq_orgate = DEVICE(&ps->mmc_irq_orgate);
> +
> + /* Connect EMMC and EMMC2 to the interrupt controller */
> + qdev_connect_gpio_out(mmc_irq_orgate, 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_EMMC_EMMC2));
> +
> + /* Connect USB OTG and MPHI to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mphi), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MPHI));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
> +
> + /* Connect DMA 0-6 to the interrupt controller */
> + for (int_n = GIC_SPI_INTERRUPT_DMA_0; int_n <= GIC_SPI_INTERRUPT_DMA_6;
> + int_n++) {
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dma),
> + int_n - GIC_SPI_INTERRUPT_DMA_0,
> + qdev_get_gpio_in(gicdev, int_n));
> + }
> +
> + /* According to DTS, DMA 7 and 8 share one irq */
> + DeviceState *dma_7_8_irq_orgate = DEVICE(&ps->dma_7_8_irq_orgate);
> +
> + /* Connect DMA 7-8 to the interrupt controller */
> + qdev_connect_gpio_out(dma_7_8_irq_orgate, 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_7_8));
> +
> + /* According to DTS, DMA 9 and 10 share one irq */
> + DeviceState *dma_9_10_irq_orgate = DEVICE(&ps->dma_9_10_irq_orgate);
> +
> + /* Connect DMA 9-10 to the interrupt controller */
> + qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_9_10));
> +
> + /* Pass through inbound GPIO lines to the GIC */
> + qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
> +
> + /* Pass through outbound IRQ lines from the GIC */
> + qdev_pass_gpios(DEVICE(&s->gic), DEVICE(&s->peripherals), NULL);
> }
Otherwise looks OK.
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 06/45] Add BCM2838 GPIO stub
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (4 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 05/45] Add GIC-400 to " Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:28 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 07/45] Implement BCM2838 GPIO functionality Sergey Kambalin
` (40 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838.c | 4 +-
hw/gpio/bcm2838_gpio.c | 152 +++++++++++++++++++++++++++
hw/gpio/meson.build | 5 +-
include/hw/arm/bcm2838_peripherals.h | 2 -
include/hw/gpio/bcm2838_gpio.h | 40 +++++++
5 files changed, 198 insertions(+), 5 deletions(-)
create mode 100644 hw/gpio/bcm2838_gpio.c
create mode 100644 include/hw/gpio/bcm2838_gpio.h
diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
index 042e543006..8925957c6c 100644
--- a/hw/arm/bcm2838.c
+++ b/hw/arm/bcm2838.c
@@ -14,7 +14,7 @@
#include "hw/arm/bcm2838.h"
#include "trace.h"
-#define GIC400_MAINTAINANCE_IRQ 9
+#define GIC400_MAINTENANCE_IRQ 9
#define GIC400_TIMER_NS_EL2_IRQ 10
#define GIC400_TIMER_VIRT_IRQ 11
#define GIC400_LEGACY_FIQ 12
@@ -163,7 +163,7 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 4 * BCM283X_NCPUS,
qdev_get_gpio_in(gicdev,
- PPI(n, GIC400_MAINTAINANCE_IRQ)));
+ PPI(n, GIC400_MAINTENANCE_IRQ)));
/* Connect timers from the CPU to the interrupt controller */
qdev_connect_gpio_out(cpudev, GTIMER_PHYS,
diff --git a/hw/gpio/bcm2838_gpio.c b/hw/gpio/bcm2838_gpio.c
new file mode 100644
index 0000000000..15b66cb559
--- /dev/null
+++ b/hw/gpio/bcm2838_gpio.c
@@ -0,0 +1,152 @@
+/*
+ * Raspberry Pi (BCM2838) GPIO Controller
+ * This implementation is based on bcm2835_gpio (hw/gpio/bcm2835_gpio.c)
+ *
+ * Copyright (c) 2022 Auriga LLC
+ *
+ * Authors:
+ * Lotosh, Aleksey <aleksey.lotosh@auriga.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qapi/error.h"
+#include "hw/sysbus.h"
+#include "migration/vmstate.h"
+#include "hw/gpio/bcm2838_gpio.h"
+
+#define GPFSEL0 0x00
+#define GPFSEL1 0x04
+#define GPFSEL2 0x08
+#define GPFSEL3 0x0C
+#define GPFSEL4 0x10
+#define GPFSEL5 0x14
+#define GPSET0 0x1C
+#define GPSET1 0x20
+#define GPCLR0 0x28
+#define GPCLR1 0x2C
+#define GPLEV0 0x34
+#define GPLEV1 0x38
+#define GPEDS0 0x40
+#define GPEDS1 0x44
+#define GPREN0 0x4C
+#define GPREN1 0x50
+#define GPFEN0 0x58
+#define GPFEN1 0x5C
+#define GPHEN0 0x64
+#define GPHEN1 0x68
+#define GPLEN0 0x70
+#define GPLEN1 0x74
+#define GPAREN0 0x7C
+#define GPAREN1 0x80
+#define GPAFEN0 0x88
+#define GPAFEN1 0x8C
+
+#define GPIO_PUP_PDN_CNTRL_REG0 0xE4
+#define GPIO_PUP_PDN_CNTRL_REG1 0xE8
+#define GPIO_PUP_PDN_CNTRL_REG2 0xEC
+#define GPIO_PUP_PDN_CNTRL_REG3 0xF0
+
+#define RESET_VAL_CNTRL_REG0 0xAAA95555;
+#define RESET_VAL_CNTRL_REG1 0xA0AAAAAA;
+#define RESET_VAL_CNTRL_REG2 0x50AAA95A;
+#define RESET_VAL_CNTRL_REG3 0x00055555;
+
+#define BYTES_IN_WORD 4
+
+static uint64_t bcm2838_gpio_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint64_t value = 0;
+
+ qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
+ TYPE_BCM2838_GPIO, __func__, offset);
+
+ return value;
+}
+
+static void bcm2838_gpio_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
+ TYPE_BCM2838_GPIO, __func__, offset);
+}
+
+static void bcm2838_gpio_reset(DeviceState *dev)
+{
+ BCM2838GpioState *s = BCM2838_GPIO(dev);
+
+ s->lev0 = 0;
+ s->lev1 = 0;
+
+ s->pup_cntrl_reg[0] = RESET_VAL_CNTRL_REG0;
+ s->pup_cntrl_reg[1] = RESET_VAL_CNTRL_REG1;
+ s->pup_cntrl_reg[2] = RESET_VAL_CNTRL_REG2;
+ s->pup_cntrl_reg[3] = RESET_VAL_CNTRL_REG3;
+}
+
+static const MemoryRegionOps bcm2838_gpio_ops = {
+ .read = bcm2838_gpio_read,
+ .write = bcm2838_gpio_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_bcm2838_gpio = {
+ .name = "bcm2838_gpio",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(fsel, BCM2838GpioState, BCM2838_GPIO_NUM),
+ VMSTATE_UINT32(lev0, BCM2838GpioState),
+ VMSTATE_UINT32(lev1, BCM2838GpioState),
+ VMSTATE_UINT8(sd_fsel, BCM2838GpioState),
+ VMSTATE_UINT32_ARRAY(pup_cntrl_reg, BCM2838GpioState,
+ GPIO_PUP_PDN_CNTRL_NUM),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void bcm2838_gpio_init(Object *obj)
+{
+ BCM2838GpioState *s = BCM2838_GPIO(obj);
+ DeviceState *dev = DEVICE(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ memory_region_init_io(&s->iomem, obj, &bcm2838_gpio_ops, s,
+ "bcm2838_gpio", BCM2838_GPIO_REGS_SIZE);
+ sysbus_init_mmio(sbd, &s->iomem);
+ qdev_init_gpio_out(dev, s->out, BCM2838_GPIO_NUM);
+}
+
+static void bcm2838_gpio_realize(DeviceState *dev, Error **errp)
+{
+ /* Temporary stub. Do nothing */
+}
+
+static void bcm2838_gpio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->vmsd = &vmstate_bcm2838_gpio;
+ dc->realize = &bcm2838_gpio_realize;
+ dc->reset = &bcm2838_gpio_reset;
+}
+
+static const TypeInfo bcm2838_gpio_info = {
+ .name = TYPE_BCM2838_GPIO,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2838GpioState),
+ .instance_init = bcm2838_gpio_init,
+ .class_init = bcm2838_gpio_class_init,
+};
+
+static void bcm2838_gpio_register_types(void)
+{
+ type_register_static(&bcm2838_gpio_info);
+}
+
+type_init(bcm2838_gpio_register_types)
diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build
index 066ea96480..8a8d03d885 100644
--- a/hw/gpio/meson.build
+++ b/hw/gpio/meson.build
@@ -9,6 +9,9 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c'))
system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c'))
system_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c'))
-system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c'))
+system_ss.add(when: 'CONFIG_RASPI', if_true: files(
+ 'bcm2835_gpio.c',
+ 'bcm2838_gpio.c'
+))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c'))
system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c'))
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 5a72355183..d07831753a 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -11,8 +11,6 @@
#include "hw/arm/bcm2835_peripherals.h"
-#define GENET_OFFSET 0x1580000
-
/* SPI */
#define GIC_SPI_INTERRUPT_MBOX 33
#define GIC_SPI_INTERRUPT_MPHI 40
diff --git a/include/hw/gpio/bcm2838_gpio.h b/include/hw/gpio/bcm2838_gpio.h
new file mode 100644
index 0000000000..06d48e0c19
--- /dev/null
+++ b/include/hw/gpio/bcm2838_gpio.h
@@ -0,0 +1,40 @@
+/*
+ * Raspberry Pi (BCM2838) GPIO Controller
+ * This implementation is based on bcm2835_gpio (hw/gpio/bcm2835_gpio.c)
+ *
+ * Copyright (c) 2022 Auriga LLC
+ *
+ * Authors:
+ * Lotosh, Aleksey <aleksey.lotosh@auriga.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef BCM2838_GPIO_H
+#define BCM2838_GPIO_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_BCM2838_GPIO "bcm2838-gpio"
+OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GpioState, BCM2838_GPIO)
+
+#define BCM2838_GPIO_REGS_SIZE 0x1000
+#define BCM2838_GPIO_NUM 58
+#define GPIO_PUP_PDN_CNTRL_NUM 4
+
+struct BCM2838GpioState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+
+
+ uint8_t fsel[BCM2838_GPIO_NUM];
+ uint32_t lev0, lev1;
+ uint8_t sd_fsel;
+ qemu_irq out[BCM2838_GPIO_NUM];
+ uint32_t pup_cntrl_reg[GPIO_PUP_PDN_CNTRL_NUM];
+};
+
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 06/45] Add BCM2838 GPIO stub
2023-12-08 2:31 ` [PATCH v4 06/45] Add BCM2838 GPIO stub Sergey Kambalin
@ 2023-12-18 16:28 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:28 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:39, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838.c | 4 +-
> hw/gpio/bcm2838_gpio.c | 152 +++++++++++++++++++++++++++
> hw/gpio/meson.build | 5 +-
> include/hw/arm/bcm2838_peripherals.h | 2 -
> include/hw/gpio/bcm2838_gpio.h | 40 +++++++
> 5 files changed, 198 insertions(+), 5 deletions(-)
> create mode 100644 hw/gpio/bcm2838_gpio.c
> create mode 100644 include/hw/gpio/bcm2838_gpio.h
>
> diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
> index 042e543006..8925957c6c 100644
> --- a/hw/arm/bcm2838.c
> +++ b/hw/arm/bcm2838.c
> @@ -14,7 +14,7 @@
> #include "hw/arm/bcm2838.h"
> #include "trace.h"
>
> -#define GIC400_MAINTAINANCE_IRQ 9
> +#define GIC400_MAINTENANCE_IRQ 9
> #define GIC400_TIMER_NS_EL2_IRQ 10
> #define GIC400_TIMER_VIRT_IRQ 11
> #define GIC400_LEGACY_FIQ 12
> @@ -163,7 +163,7 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
>
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 4 * BCM283X_NCPUS,
> qdev_get_gpio_in(gicdev,
> - PPI(n, GIC400_MAINTAINANCE_IRQ)));
> + PPI(n, GIC400_MAINTENANCE_IRQ)));
>
> /* Connect timers from the CPU to the interrupt controller */
> qdev_connect_gpio_out(cpudev, GTIMER_PHYS,
Squash these changes into the previous patch :-)
> diff --git a/hw/gpio/bcm2838_gpio.c b/hw/gpio/bcm2838_gpio.c
> new file mode 100644
> index 0000000000..15b66cb559
> --- /dev/null
> +++ b/hw/gpio/bcm2838_gpio.c
> @@ -0,0 +1,152 @@
> +/*
> + * Raspberry Pi (BCM2838) GPIO Controller
> + * This implementation is based on bcm2835_gpio (hw/gpio/bcm2835_gpio.c)
> + *
> + * Copyright (c) 2022 Auriga LLC
> + *
> + * Authors:
> + * Lotosh, Aleksey <aleksey.lotosh@auriga.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
It would be nice to be consistent about whether you want to use
SPDX-License-Identifier tags or not in the new files you're adding.
(Patch 4's bcm2838.c uses it; this one doesn't.)
> + */
> +#define RESET_VAL_CNTRL_REG0 0xAAA95555;
> +#define RESET_VAL_CNTRL_REG1 0xA0AAAAAA;
> +#define RESET_VAL_CNTRL_REG2 0x50AAA95A;
> +#define RESET_VAL_CNTRL_REG3 0x00055555;
These shouldn't have trailing semicolons.
> +
> +#define BYTES_IN_WORD 4
> diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build
> index 066ea96480..8a8d03d885 100644
> --- a/hw/gpio/meson.build
> +++ b/hw/gpio/meson.build
> @@ -9,6 +9,9 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c'))
> system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c'))
> system_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c'))
> system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c'))
> -system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c'))
> +system_ss.add(when: 'CONFIG_RASPI', if_true: files(
> + 'bcm2835_gpio.c',
> + 'bcm2838_gpio.c'
> +))
> system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c'))
> system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c'))
> diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
> index 5a72355183..d07831753a 100644
> --- a/include/hw/arm/bcm2838_peripherals.h
> +++ b/include/hw/arm/bcm2838_peripherals.h
> @@ -11,8 +11,6 @@
>
> #include "hw/arm/bcm2835_peripherals.h"
>
> -#define GENET_OFFSET 0x1580000
> -
Why does this line get deleted ?
> /* SPI */
> #define GIC_SPI_INTERRUPT_MBOX 33
> #define GIC_SPI_INTERRUPT_MPHI 40
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 07/45] Implement BCM2838 GPIO functionality
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (5 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 06/45] Add BCM2838 GPIO stub Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:35 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 08/45] Connect SD controller to BCM2838 GPIO Sergey Kambalin
` (39 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/gpio/bcm2838_gpio.c | 192 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 189 insertions(+), 3 deletions(-)
diff --git a/hw/gpio/bcm2838_gpio.c b/hw/gpio/bcm2838_gpio.c
index 15b66cb559..51eb55b00a 100644
--- a/hw/gpio/bcm2838_gpio.c
+++ b/hw/gpio/bcm2838_gpio.c
@@ -19,6 +19,7 @@
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/gpio/bcm2838_gpio.h"
+#include "hw/irq.h"
#define GPFSEL0 0x00
#define GPFSEL1 0x04
@@ -57,14 +58,139 @@
#define RESET_VAL_CNTRL_REG2 0x50AAA95A;
#define RESET_VAL_CNTRL_REG3 0x00055555;
+#define NUM_FSELN_IN_GPFSELN 10
+#define NUM_BITS_FSELN 3
+#define MASK_FSELN 0x7
+
#define BYTES_IN_WORD 4
+static uint32_t gpfsel_get(BCM2838GpioState *s, uint8_t reg)
+{
+ int i;
+ uint32_t value = 0;
+ for (i = 0; i < NUM_FSELN_IN_GPFSELN; i++) {
+ uint32_t index = NUM_FSELN_IN_GPFSELN * reg + i;
+ if (index < sizeof(s->fsel)) {
+ value |= (s->fsel[index] & MASK_FSELN) << (NUM_BITS_FSELN * i);
+ }
+ }
+ return value;
+}
+
+static void gpfsel_set(BCM2838GpioState *s, uint8_t reg, uint32_t value)
+{
+ int i;
+ for (i = 0; i < NUM_FSELN_IN_GPFSELN; i++) {
+ uint32_t index = NUM_FSELN_IN_GPFSELN * reg + i;
+ if (index < sizeof(s->fsel)) {
+ int fsel = (value >> (NUM_BITS_FSELN * i)) & MASK_FSELN;
+ s->fsel[index] = fsel;
+ }
+ }
+}
+
+static int gpfsel_is_out(BCM2838GpioState *s, int index)
+{
+ if (index >= 0 && index < BCM2838_GPIO_NUM) {
+ return s->fsel[index] == 1;
+ }
+ return 0;
+}
+
+static void gpset(BCM2838GpioState *s, uint32_t val, uint8_t start,
+ uint8_t count, uint32_t *lev)
+{
+ uint32_t changes = val & ~*lev;
+ uint32_t cur = 1;
+
+ int i;
+ for (i = 0; i < count; i++) {
+ if ((changes & cur) && (gpfsel_is_out(s, start + i))) {
+ qemu_set_irq(s->out[start + i], 1);
+ }
+ cur <<= 1;
+ }
+
+ *lev |= val;
+}
+
+static void gpclr(BCM2838GpioState *s, uint32_t val, uint8_t start,
+ uint8_t count, uint32_t *lev)
+{
+ uint32_t changes = val & *lev;
+ uint32_t cur = 1;
+
+ int i;
+ for (i = 0; i < count; i++) {
+ if ((changes & cur) && (gpfsel_is_out(s, start + i))) {
+ qemu_set_irq(s->out[start + i], 0);
+ }
+ cur <<= 1;
+ }
+
+ *lev &= ~val;
+}
+
static uint64_t bcm2838_gpio_read(void *opaque, hwaddr offset, unsigned size)
{
+ BCM2838GpioState *s = (BCM2838GpioState *)opaque;
uint64_t value = 0;
- qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
- TYPE_BCM2838_GPIO, __func__, offset);
+ switch (offset) {
+ case GPFSEL0:
+ case GPFSEL1:
+ case GPFSEL2:
+ case GPFSEL3:
+ case GPFSEL4:
+ case GPFSEL5:
+ value = gpfsel_get(s, offset / BYTES_IN_WORD);
+ break;
+ case GPSET0:
+ case GPSET1:
+ case GPCLR0:
+ case GPCLR1:
+ /* Write Only */
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: %s: Attempt reading from write only"
+ " register. %lu will be returned. Address 0x%"HWADDR_PRIx
+ ", size %u\n", TYPE_BCM2838_GPIO, __func__, value, offset,
+ size);
+ break;
+ case GPLEV0:
+ value = s->lev0;
+ break;
+ case GPLEV1:
+ value = s->lev1;
+ break;
+ case GPEDS0:
+ case GPEDS1:
+ case GPREN0:
+ case GPREN1:
+ case GPFEN0:
+ case GPFEN1:
+ case GPHEN0:
+ case GPHEN1:
+ case GPLEN0:
+ case GPLEN1:
+ case GPAREN0:
+ case GPAREN1:
+ case GPAFEN0:
+ case GPAFEN1:
+ /* Not implemented */
+ qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
+ TYPE_BCM2838_GPIO, __func__, offset);
+ break;
+ case GPIO_PUP_PDN_CNTRL_REG0:
+ case GPIO_PUP_PDN_CNTRL_REG1:
+ case GPIO_PUP_PDN_CNTRL_REG2:
+ case GPIO_PUP_PDN_CNTRL_REG3:
+ value = s->pup_cntrl_reg[(offset - GPIO_PUP_PDN_CNTRL_REG0)
+ / sizeof(s->pup_cntrl_reg[0])];
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: %s: bad offset %"HWADDR_PRIx"\n",
+ TYPE_BCM2838_GPIO, __func__, offset);
+ break;
+ }
return value;
}
@@ -72,14 +198,74 @@ static uint64_t bcm2838_gpio_read(void *opaque, hwaddr offset, unsigned size)
static void bcm2838_gpio_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
- qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
+ BCM2838GpioState *s = (BCM2838GpioState *)opaque;
+
+ switch (offset) {
+ case GPFSEL0:
+ case GPFSEL1:
+ case GPFSEL2:
+ case GPFSEL3:
+ case GPFSEL4:
+ case GPFSEL5:
+ gpfsel_set(s, offset / BYTES_IN_WORD, value);
+ break;
+ case GPSET0:
+ gpset(s, value, 0, 32, &s->lev0);
+ break;
+ case GPSET1:
+ gpset(s, value, 32, 22, &s->lev1);
+ break;
+ case GPCLR0:
+ gpclr(s, value, 0, 32, &s->lev0);
+ break;
+ case GPCLR1:
+ gpclr(s, value, 32, 22, &s->lev1);
+ break;
+ case GPLEV0:
+ case GPLEV1:
+ /* Read Only */
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: %s: Attempt writing %lu to read "
+ "only register. Ignored. Address 0x%"HWADDR_PRIx", size "
+ "%u\n", TYPE_BCM2838_GPIO, __func__, value, offset, size);
+ break;
+ case GPEDS0:
+ case GPEDS1:
+ case GPREN0:
+ case GPREN1:
+ case GPFEN0:
+ case GPFEN1:
+ case GPHEN0:
+ case GPHEN1:
+ case GPLEN0:
+ case GPLEN1:
+ case GPAREN0:
+ case GPAREN1:
+ case GPAFEN0:
+ case GPAFEN1:
+ /* Not implemented */
+ qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
+ TYPE_BCM2838_GPIO, __func__, offset);
+ break;
+ case GPIO_PUP_PDN_CNTRL_REG0:
+ case GPIO_PUP_PDN_CNTRL_REG1:
+ case GPIO_PUP_PDN_CNTRL_REG2:
+ case GPIO_PUP_PDN_CNTRL_REG3:
+ s->pup_cntrl_reg[(offset - GPIO_PUP_PDN_CNTRL_REG0)
+ / sizeof(s->pup_cntrl_reg[0])] = value;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: %s: bad offset %"HWADDR_PRIx"\n",
TYPE_BCM2838_GPIO, __func__, offset);
+ }
+ return;
}
static void bcm2838_gpio_reset(DeviceState *dev)
{
BCM2838GpioState *s = BCM2838_GPIO(dev);
+ memset(s->fsel, 0, sizeof(s->fsel));
+
s->lev0 = 0;
s->lev1 = 0;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 07/45] Implement BCM2838 GPIO functionality
2023-12-08 2:31 ` [PATCH v4 07/45] Implement BCM2838 GPIO functionality Sergey Kambalin
@ 2023-12-18 16:35 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:35 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/gpio/bcm2838_gpio.c | 192 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 189 insertions(+), 3 deletions(-)
> static uint64_t bcm2838_gpio_read(void *opaque, hwaddr offset, unsigned size)
> {
> + BCM2838GpioState *s = (BCM2838GpioState *)opaque;
> uint64_t value = 0;
>
> - qemu_log_mask(LOG_UNIMP, "%s: %s: not implemented for %"HWADDR_PRIx"\n",
> - TYPE_BCM2838_GPIO, __func__, offset);
> + switch (offset) {
> + case GPFSEL0:
> + case GPFSEL1:
> + case GPFSEL2:
> + case GPFSEL3:
> + case GPFSEL4:
> + case GPFSEL5:
> + value = gpfsel_get(s, offset / BYTES_IN_WORD);
> + break;
> + case GPSET0:
> + case GPSET1:
> + case GPCLR0:
> + case GPCLR1:
> + /* Write Only */
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: %s: Attempt reading from write only"
> + " register. %lu will be returned. Address 0x%"HWADDR_PRIx
> + ", size %u\n", TYPE_BCM2838_GPIO, __func__, value, offset,
> + size);
'value' is a uint64_t, but you try to print it with a %lu format
string here. This won't compile on 32-bit machines. (In general
watch out for %lu %lx etc and don't use them unless the type
really is "long".)
You can get the compiler to tell you about these format issues by
any of the following options:
* building for a 32-bit host (eg i386)
* building for macos (the macos clang is stricter about these even
when building for a 64-bit)
* running your patches through the gitlab CI setup: fork the QEMU
project on gitlab as an ordinary gitlab user; then push your
branch to your fork of the repo with some environment variables
set to trigger a CI pipeline run:
https://www.qemu.org/docs/master/devel/ci.html#custom-ci-cd-variables
> static void bcm2838_gpio_reset(DeviceState *dev)
> {
> BCM2838GpioState *s = BCM2838_GPIO(dev);
>
> + memset(s->fsel, 0, sizeof(s->fsel));
> +
> s->lev0 = 0;
> s->lev1 = 0;
I think this bit should go in the previous patch since we added
s->fsel there and do the other reset code there already.
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 08/45] Connect SD controller to BCM2838 GPIO
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (6 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 07/45] Implement BCM2838 GPIO functionality Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:38 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 09/45] Add GPIO and SD to BCM2838 periph Sergey Kambalin
` (38 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/gpio/bcm2838_gpio.c | 59 +++++++++++++++++++++++++++++++---
include/hw/gpio/bcm2838_gpio.h | 5 +++
2 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/hw/gpio/bcm2838_gpio.c b/hw/gpio/bcm2838_gpio.c
index 51eb55b00a..f166ce7959 100644
--- a/hw/gpio/bcm2838_gpio.c
+++ b/hw/gpio/bcm2838_gpio.c
@@ -17,9 +17,10 @@
#include "qemu/timer.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
-#include "migration/vmstate.h"
+#include "hw/sd/sd.h"
#include "hw/gpio/bcm2838_gpio.h"
#include "hw/irq.h"
+#include "migration/vmstate.h"
#define GPFSEL0 0x00
#define GPFSEL1 0x04
@@ -64,6 +65,16 @@
#define BYTES_IN_WORD 4
+/* bcm,function property */
+#define BCM2838_FSEL_GPIO_IN 0
+#define BCM2838_FSEL_GPIO_OUT 1
+#define BCM2838_FSEL_ALT5 2
+#define BCM2838_FSEL_ALT4 3
+#define BCM2838_FSEL_ALT0 4
+#define BCM2838_FSEL_ALT1 5
+#define BCM2838_FSEL_ALT2 6
+#define BCM2838_FSEL_ALT3 7
+
static uint32_t gpfsel_get(BCM2838GpioState *s, uint8_t reg)
{
int i;
@@ -87,6 +98,31 @@ static void gpfsel_set(BCM2838GpioState *s, uint8_t reg, uint32_t value)
s->fsel[index] = fsel;
}
}
+
+ /* SD controller selection (48-53) */
+ if (s->sd_fsel != BCM2838_FSEL_GPIO_IN
+ && (s->fsel[48] == BCM2838_FSEL_GPIO_IN)
+ && (s->fsel[49] == BCM2838_FSEL_GPIO_IN)
+ && (s->fsel[50] == BCM2838_FSEL_GPIO_IN)
+ && (s->fsel[51] == BCM2838_FSEL_GPIO_IN)
+ && (s->fsel[52] == BCM2838_FSEL_GPIO_IN)
+ && (s->fsel[53] == BCM2838_FSEL_GPIO_IN)
+ ) {
+ /* SDHCI controller selected */
+ sdbus_reparent_card(s->sdbus_sdhost, s->sdbus_sdhci);
+ s->sd_fsel = BCM2838_FSEL_GPIO_IN;
+ } else if (s->sd_fsel != BCM2838_FSEL_ALT0
+ && (s->fsel[48] == BCM2838_FSEL_ALT0) /* SD_CLK_R */
+ && (s->fsel[49] == BCM2838_FSEL_ALT0) /* SD_CMD_R */
+ && (s->fsel[50] == BCM2838_FSEL_ALT0) /* SD_DATA0_R */
+ && (s->fsel[51] == BCM2838_FSEL_ALT0) /* SD_DATA1_R */
+ && (s->fsel[52] == BCM2838_FSEL_ALT0) /* SD_DATA2_R */
+ && (s->fsel[53] == BCM2838_FSEL_ALT0) /* SD_DATA3_R */
+ ) {
+ /* SDHost controller selected */
+ sdbus_reparent_card(s->sdbus_sdhci, s->sdbus_sdhost);
+ s->sd_fsel = BCM2838_FSEL_ALT0;
+ }
}
static int gpfsel_is_out(BCM2838GpioState *s, int index)
@@ -266,6 +302,11 @@ static void bcm2838_gpio_reset(DeviceState *dev)
memset(s->fsel, 0, sizeof(s->fsel));
+ s->sd_fsel = 0;
+
+ /* SDHCI is selected by default */
+ sdbus_reparent_card(&s->sdbus, s->sdbus_sdhci);
+
s->lev0 = 0;
s->lev1 = 0;
@@ -302,15 +343,25 @@ static void bcm2838_gpio_init(Object *obj)
DeviceState *dev = DEVICE(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
- memory_region_init_io(&s->iomem, obj, &bcm2838_gpio_ops, s,
- "bcm2838_gpio", BCM2838_GPIO_REGS_SIZE);
+ qbus_init(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, DEVICE(s), "sd-bus");
+
+ memory_region_init_io(
+ &s->iomem, obj,
+ &bcm2838_gpio_ops, s, "bcm2838_gpio", BCM2838_GPIO_REGS_SIZE);
sysbus_init_mmio(sbd, &s->iomem);
qdev_init_gpio_out(dev, s->out, BCM2838_GPIO_NUM);
}
static void bcm2838_gpio_realize(DeviceState *dev, Error **errp)
{
- /* Temporary stub. Do nothing */
+ BCM2838GpioState *s = BCM2838_GPIO(dev);
+ Object *obj;
+
+ obj = object_property_get_link(OBJECT(dev), "sdbus-sdhci", &error_abort);
+ s->sdbus_sdhci = SD_BUS(obj);
+
+ obj = object_property_get_link(OBJECT(dev), "sdbus-sdhost", &error_abort);
+ s->sdbus_sdhost = SD_BUS(obj);
}
static void bcm2838_gpio_class_init(ObjectClass *klass, void *data)
diff --git a/include/hw/gpio/bcm2838_gpio.h b/include/hw/gpio/bcm2838_gpio.h
index 06d48e0c19..f2a57a697f 100644
--- a/include/hw/gpio/bcm2838_gpio.h
+++ b/include/hw/gpio/bcm2838_gpio.h
@@ -14,6 +14,7 @@
#ifndef BCM2838_GPIO_H
#define BCM2838_GPIO_H
+#include "hw/sd/sd.h"
#include "hw/sysbus.h"
#include "qom/object.h"
@@ -29,6 +30,10 @@ struct BCM2838GpioState {
MemoryRegion iomem;
+ /* SDBus selector */
+ SDBus sdbus;
+ SDBus *sdbus_sdhci;
+ SDBus *sdbus_sdhost;
uint8_t fsel[BCM2838_GPIO_NUM];
uint32_t lev0, lev1;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 08/45] Connect SD controller to BCM2838 GPIO
2023-12-08 2:31 ` [PATCH v4 08/45] Connect SD controller to BCM2838 GPIO Sergey Kambalin
@ 2023-12-18 16:38 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:38 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/gpio/bcm2838_gpio.c | 59 +++++++++++++++++++++++++++++++---
> include/hw/gpio/bcm2838_gpio.h | 5 +++
> 2 files changed, 60 insertions(+), 4 deletions(-)
>
> diff --git a/hw/gpio/bcm2838_gpio.c b/hw/gpio/bcm2838_gpio.c
> index 51eb55b00a..f166ce7959 100644
> --- a/hw/gpio/bcm2838_gpio.c
> +++ b/hw/gpio/bcm2838_gpio.c
> @@ -17,9 +17,10 @@
> #include "qemu/timer.h"
> #include "qapi/error.h"
> #include "hw/sysbus.h"
> -#include "migration/vmstate.h"
> +#include "hw/sd/sd.h"
> #include "hw/gpio/bcm2838_gpio.h"
> #include "hw/irq.h"
> +#include "migration/vmstate.h"
Put the #include in the order you want in the first place,
please, rather than putting it in one place in one patch and
then moving it around in a second patch.
>
> #define GPFSEL0 0x00
> #define GPFSEL1 0x04
> @@ -64,6 +65,16 @@
> @@ -302,15 +343,25 @@ static void bcm2838_gpio_init(Object *obj)
> DeviceState *dev = DEVICE(obj);
> SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
>
> - memory_region_init_io(&s->iomem, obj, &bcm2838_gpio_ops, s,
> - "bcm2838_gpio", BCM2838_GPIO_REGS_SIZE);
> + qbus_init(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, DEVICE(s), "sd-bus");
> +
> + memory_region_init_io(
> + &s->iomem, obj,
> + &bcm2838_gpio_ops, s, "bcm2838_gpio", BCM2838_GPIO_REGS_SIZE);
Oddly placed newline after the "(" here.
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 09/45] Add GPIO and SD to BCM2838 periph
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (7 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 08/45] Connect SD controller to BCM2838 GPIO Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:41 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 10/45] Add BCM2838 checkpoint support Sergey Kambalin
` (37 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 140 +++++++++++++++++++++++++++
include/hw/arm/bcm2838_peripherals.h | 9 ++
2 files changed, 149 insertions(+)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 06110c724f..c147b6e453 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -15,22 +15,53 @@
/* Lower peripheral base address on the VC (GPU) system bus */
#define BCM2838_VC_PERI_LOW_BASE 0x7c000000
+/* Capabilities for SD controller: no DMA, high-speed, default clocks etc. */
+#define BCM2835_SDHC_CAPAREG 0x52134b4
+
static void bcm2838_peripherals_init(Object *obj)
{
BCM2838PeripheralState *s = BCM2838_PERIPHERALS(obj);
BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_GET_CLASS(obj);
+ RaspiPeripheralBaseState *s_base = RASPI_PERIPHERALS_BASE(obj);
/* Lower memory region for peripheral devices (exported to the Soc) */
memory_region_init(&s->peri_low_mr, obj, "bcm2838-peripherals",
bc->peri_low_size);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
+ /* Extended Mass Media Controller 2 */
+ object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
+
+ /* GPIO */
+ object_initialize_child(obj, "gpio", &s->gpio, TYPE_BCM2838_GPIO);
+
+ object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci",
+ OBJECT(&s_base->sdhci.sdbus));
+ object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
+ OBJECT(&s_base->sdhost.sdbus));
+
+ object_initialize_child(obj, "mmc_irq_orgate", &s->mmc_irq_orgate,
+ TYPE_OR_IRQ);
+ object_property_set_int(OBJECT(&s->mmc_irq_orgate), "num-lines", 2,
+ &error_abort);
+
+ object_initialize_child(obj, "dma_7_8_irq_orgate", &s->dma_7_8_irq_orgate,
+ TYPE_OR_IRQ);
+ object_property_set_int(OBJECT(&s->dma_7_8_irq_orgate), "num-lines", 2,
+ &error_abort);
+
+ object_initialize_child(obj, "dma_9_10_irq_orgate", &s->dma_9_10_irq_orgate,
+ TYPE_OR_IRQ);
+ object_property_set_int(OBJECT(&s->dma_9_10_irq_orgate), "num-lines", 2,
+ &error_abort);
}
static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
{
+ MemoryRegion *mphi_mr;
BCM2838PeripheralState *s = BCM2838_PERIPHERALS(dev);
BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
+ int n;
bcm_soc_peripherals_common_realize(dev, errp);
@@ -42,6 +73,115 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
BCM2838_VC_PERI_LOW_BASE,
&s->peri_low_mr_alias, 1);
+ /* Extended Mass Media Controller 2 */
+ object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
+ &error_abort);
+ object_property_set_uint(OBJECT(&s->emmc2), "capareg",
+ BCM2835_SDHC_CAPAREG, &error_abort);
+ object_property_set_bool(OBJECT(&s->emmc2), "pending-insert-quirk", true,
+ &error_abort);
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc2), errp)) {
+ return;
+ }
+
+ memory_region_add_subregion(
+ &s_base->peri_mr, EMMC2_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->emmc2), 0));
+
+ /* According to DTS, EMMC and EMMC2 share one irq */
+ if (!qdev_realize(DEVICE(&s->mmc_irq_orgate), NULL, errp)) {
+ return;
+ }
+
+ DeviceState *mmc_irq_orgate = DEVICE(&s->mmc_irq_orgate);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc2), 0,
+ qdev_get_gpio_in(mmc_irq_orgate, 0));
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->sdhci), 0,
+ qdev_get_gpio_in(mmc_irq_orgate, 1));
+
+ /* Connect EMMC and EMMC2 to the interrupt controller */
+ qdev_connect_gpio_out(mmc_irq_orgate, 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ INTERRUPT_ARASANSDIO));
+
+ /* Connect DMA 0-6 to the interrupt controller */
+ for (n = 0; n < 7; n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ GPU_INTERRUPT_DMA0 + n));
+ }
+
+ /* According to DTS, DMA 7 and 8 share one irq */
+ if (!qdev_realize(DEVICE(&s->dma_7_8_irq_orgate), NULL, errp)) {
+ return;
+ }
+ DeviceState *dma_7_8_irq_orgate = DEVICE(&s->dma_7_8_irq_orgate);
+
+ /* Connect DMA 7-8 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 7,
+ qdev_get_gpio_in(dma_7_8_irq_orgate, 0));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 8,
+ qdev_get_gpio_in(dma_7_8_irq_orgate, 1));
+
+ qdev_connect_gpio_out(dma_7_8_irq_orgate, 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ GPU_INTERRUPT_DMA7_8));
+
+ /* According to DTS, DMA 9 and 10 share one irq */
+ if (!qdev_realize(DEVICE(&s->dma_9_10_irq_orgate), NULL, errp)) {
+ return;
+ }
+ DeviceState *dma_9_10_irq_orgate = DEVICE(&s->dma_9_10_irq_orgate);
+
+ /* Connect DMA 9-10 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 9,
+ qdev_get_gpio_in(dma_9_10_irq_orgate, 0));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 10,
+ qdev_get_gpio_in(dma_9_10_irq_orgate, 1));
+
+ qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ GPU_INTERRUPT_DMA9_10));
+
+ /* Connect DMA 11-14 to the interrupt controller */
+ for (n = 11; n < 15; n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ GPU_INTERRUPT_DMA11 + n
+ - 11));
+ }
+
+ /*
+ * Connect DMA 15 to the interrupt controller, it is physically removed
+ * from other DMA channels and exclusively used by the GPU
+ */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 15,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ,
+ GPU_INTERRUPT_DMA15));
+
+ /* Map MPHI to BCM2838 memory map */
+ mphi_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s_base->mphi), 0);
+ memory_region_init_alias(&s->mphi_mr_alias, OBJECT(s), "mphi", mphi_mr, 0,
+ BCM2838_MPHI_SIZE);
+ memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
+ &s->mphi_mr_alias);
+
+ /* GPIO */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
+ return;
+ }
+ memory_region_add_subregion(
+ &s_base->peri_mr, GPIO_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
+
+ object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
}
static void bcm2838_peripherals_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index d07831753a..0a87645e01 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -10,6 +10,8 @@
#define BCM2838_PERIPHERALS_H
#include "hw/arm/bcm2835_peripherals.h"
+#include "hw/sd/sdhci.h"
+#include "hw/gpio/bcm2838_gpio.h"
/* SPI */
#define GIC_SPI_INTERRUPT_MBOX 33
@@ -45,6 +47,9 @@
#define GPU_INTERRUPT_DMA14 28
#define GPU_INTERRUPT_DMA15 31
+#define BCM2838_MPHI_OFFSET 0xb200
+#define BCM2838_MPHI_SIZE 0x200
+
#define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
BCM2838_PERIPHERALS)
@@ -58,6 +63,10 @@ struct BCM2838PeripheralState {
MemoryRegion peri_low_mr_alias;
MemoryRegion mphi_mr_alias;
+ SDHCIState emmc2;
+ UnimplementedDeviceState clkisp;
+ BCM2838GpioState gpio;
+
OrIRQState mmc_irq_orgate;
OrIRQState dma_7_8_irq_orgate;
OrIRQState dma_9_10_irq_orgate;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 09/45] Add GPIO and SD to BCM2838 periph
2023-12-08 2:31 ` [PATCH v4 09/45] Add GPIO and SD to BCM2838 periph Sergey Kambalin
@ 2023-12-18 16:41 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:41 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:37, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_peripherals.c | 140 +++++++++++++++++++++++++++
> include/hw/arm/bcm2838_peripherals.h | 9 ++
> 2 files changed, 149 insertions(+)
> @@ -42,6 +73,115 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> BCM2838_VC_PERI_LOW_BASE,
> &s->peri_low_mr_alias, 1);
>
> + /* Extended Mass Media Controller 2 */
> + object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
> + &error_abort);
> + object_property_set_uint(OBJECT(&s->emmc2), "capareg",
> + BCM2835_SDHC_CAPAREG, &error_abort);
> + object_property_set_bool(OBJECT(&s->emmc2), "pending-insert-quirk", true,
> + &error_abort);
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc2), errp)) {
> + return;
> + }
> +
> + memory_region_add_subregion(
> + &s_base->peri_mr, EMMC2_OFFSET,
> + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->emmc2), 0));
Odd indent again here...
> +
> + /* According to DTS, EMMC and EMMC2 share one irq */
> + if (!qdev_realize(DEVICE(&s->mmc_irq_orgate), NULL, errp)) {
> + return;
> + }
> +
> + DeviceState *mmc_irq_orgate = DEVICE(&s->mmc_irq_orgate);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc2), 0,
> + qdev_get_gpio_in(mmc_irq_orgate, 0));
> +
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->sdhci), 0,
> + qdev_get_gpio_in(mmc_irq_orgate, 1));
...and here.
> +
> + /* Connect EMMC and EMMC2 to the interrupt controller */
> + qdev_connect_gpio_out(mmc_irq_orgate, 0,
> + qdev_get_gpio_in_named(DEVICE(&s_base->ic),
> + BCM2835_IC_GPU_IRQ,
> + INTERRUPT_ARASANSDIO));
> +
> + /* Connect DMA 0-6 to the interrupt controller */
> + for (n = 0; n < 7; n++) {
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
> + qdev_get_gpio_in_named(DEVICE(&s_base->ic),
> + BCM2835_IC_GPU_IRQ,
> + GPU_INTERRUPT_DMA0 + n));
> + }
> +
> + /* According to DTS, DMA 7 and 8 share one irq */
> + if (!qdev_realize(DEVICE(&s->dma_7_8_irq_orgate), NULL, errp)) {
> + return;
> + }
> + DeviceState *dma_7_8_irq_orgate = DEVICE(&s->dma_7_8_irq_orgate);
Declaration not at top of code block (here and below).
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 10/45] Add BCM2838 checkpoint support
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (8 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 09/45] Add GPIO and SD to BCM2838 periph Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-18 16:42 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 11/45] Introduce Raspberry PI 4 machine Sergey Kambalin
` (36 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index c147b6e453..196fb890a2 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -22,7 +22,7 @@ static void bcm2838_peripherals_init(Object *obj)
{
BCM2838PeripheralState *s = BCM2838_PERIPHERALS(obj);
BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_GET_CLASS(obj);
- RaspiPeripheralBaseState *s_base = RASPI_PERIPHERALS_BASE(obj);
+ BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(obj);
/* Lower memory region for peripheral devices (exported to the Soc) */
memory_region_init(&s->peri_low_mr, obj, "bcm2838-peripherals",
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 10/45] Add BCM2838 checkpoint support
2023-12-08 2:31 ` [PATCH v4 10/45] Add BCM2838 checkpoint support Sergey Kambalin
@ 2023-12-18 16:42 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-18 16:42 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_peripherals.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index c147b6e453..196fb890a2 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -22,7 +22,7 @@ static void bcm2838_peripherals_init(Object *obj)
> {
> BCM2838PeripheralState *s = BCM2838_PERIPHERALS(obj);
> BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_GET_CLASS(obj);
> - RaspiPeripheralBaseState *s_base = RASPI_PERIPHERALS_BASE(obj);
> + BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(obj);
>
> /* Lower memory region for peripheral devices (exported to the Soc) */
> memory_region_init(&s->peri_low_mr, obj, "bcm2838-peripherals",
> --
I don't understand the commit message here, and the contents
of the patch look like something that maybe belongs in a
different patch?
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 11/45] Introduce Raspberry PI 4 machine
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (9 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 10/45] Add BCM2838 checkpoint support Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 12:32 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 12/45] Temporarily disable unimplemented rpi4b devices Sergey Kambalin
` (35 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2835_peripherals.c | 20 +++++++--
hw/arm/bcm2836.c | 2 +
hw/arm/bcm2838.c | 2 +
hw/arm/meson.build | 2 +-
hw/arm/raspi.c | 28 ++++++++-----
hw/arm/raspi4b.c | 72 +++++++++++++++++++++++++++++++++
include/hw/arm/raspi_platform.h | 11 +++++
include/hw/display/bcm2835_fb.h | 2 +
8 files changed, 125 insertions(+), 14 deletions(-)
create mode 100644 hw/arm/raspi4b.c
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index fd70cde123..ae8117961e 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -108,6 +108,7 @@ static void raspi_peripherals_base_init(Object *obj)
/* Framebuffer */
object_initialize_child(obj, "fb", &s->fb, TYPE_BCM2835_FB);
object_property_add_alias(obj, "vcram-size", OBJECT(&s->fb), "vcram-size");
+ object_property_add_alias(obj, "vcram-base", OBJECT(&s->fb), "vcram-base");
object_property_add_const_link(OBJECT(&s->fb), "dma-mr",
OBJECT(&s->gpu_bus_mr));
@@ -225,7 +226,7 @@ void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp)
Object *obj;
MemoryRegion *ram;
Error *err = NULL;
- uint64_t ram_size, vcram_size;
+ uint64_t ram_size, vcram_size, vcram_base;
int n;
obj = object_property_get_link(OBJECT(dev), "ram", &error_abort);
@@ -329,11 +330,24 @@ void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp)
return;
}
- if (!object_property_set_uint(OBJECT(&s->fb), "vcram-base",
- ram_size - vcram_size, errp)) {
+ vcram_base = object_property_get_uint(OBJECT(s), "vcram-base", &err);
+ if (err) {
+ error_propagate(errp, err);
return;
}
+ if (vcram_base == 0) {
+ vcram_base = (ram_size > UPPER_RAM_BASE ? UPPER_RAM_BASE : ram_size)
+ - vcram_size;
+ } else {
+ if (vcram_base + vcram_size > UPPER_RAM_BASE) {
+ vcram_base = UPPER_RAM_BASE - vcram_size;
+ }
+ }
+ if (!object_property_set_uint(OBJECT(&s->fb), "vcram-base", vcram_base,
+ errp)) {
+ return;
+ }
if (!sysbus_realize(SYS_BUS_DEVICE(&s->fb), errp)) {
return;
}
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 18675c896c..ee890f3d35 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -64,6 +64,8 @@ static void bcm283x_init(Object *obj)
"command-line");
object_property_add_alias(obj, "vcram-size", OBJECT(&s->peripherals),
"vcram-size");
+ object_property_add_alias(obj, "vcram-base", OBJECT(&s->peripherals),
+ "vcram-base");
}
bool bcm283x_common_realize(DeviceState *dev, BCMSocPeripheralBaseState *ps,
diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
index 8925957c6c..89cd9d5d8c 100644
--- a/hw/arm/bcm2838.c
+++ b/hw/arm/bcm2838.c
@@ -54,6 +54,8 @@ static void bcm2838_init(Object *obj)
"board-rev");
object_property_add_alias(obj, "vcram-size", OBJECT(&s->peripherals),
"vcram-size");
+ object_property_add_alias(obj, "vcram-base", OBJECT(&s->peripherals),
+ "vcram-base");
object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
"command-line");
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 551ab6abf5..27e6797de2 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -39,7 +39,7 @@ arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubi
arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bananapi_m2u.c'))
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
-arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files('bcm2838.c'))
+arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files('bcm2838.c', 'raspi4b.c'))
arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 7d04734cd2..da1e9e7c13 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -18,6 +18,7 @@
#include "qapi/error.h"
#include "hw/arm/boot.h"
#include "hw/arm/bcm2836.h"
+#include "hw/arm/bcm2838.h"
#include "hw/arm/raspi_platform.h"
#include "hw/registerfields.h"
#include "qemu/error-report.h"
@@ -61,6 +62,7 @@ typedef enum RaspiProcessorId {
PROCESSOR_ID_BCM2835 = 0,
PROCESSOR_ID_BCM2836 = 1,
PROCESSOR_ID_BCM2837 = 2,
+ PROCESSOR_ID_BCM2838 = 3,
} RaspiProcessorId;
static const struct {
@@ -70,13 +72,9 @@ static const struct {
[PROCESSOR_ID_BCM2835] = {TYPE_BCM2835, 1},
[PROCESSOR_ID_BCM2836] = {TYPE_BCM2836, BCM283X_NCPUS},
[PROCESSOR_ID_BCM2837] = {TYPE_BCM2837, BCM283X_NCPUS},
+ [PROCESSOR_ID_BCM2838] = {TYPE_BCM2838, BCM283X_NCPUS},
};
-static void raspi_base_machine_init(MachineState *machine,
- BCM283XBaseState *soc);
-static void raspi_machine_class_common_init(MachineClass *mc,
- uint32_t board_rev);
-
static uint64_t board_ram_size(uint32_t board_rev)
{
assert(FIELD_EX32(board_rev, REV_CODE, STYLE)); /* Only new style */
@@ -93,7 +91,7 @@ static RaspiProcessorId board_processor_id(uint32_t board_rev)
return proc_id;
}
-static const char *board_soc_type(uint32_t board_rev)
+const char *board_soc_type(uint32_t board_rev)
{
return soc_property[board_processor_id(board_rev)].type;
}
@@ -248,13 +246,14 @@ static void setup_boot(MachineState *machine, ARMCPU *cpu,
arm_load_kernel(cpu, machine, &s->binfo);
}
-static void raspi_base_machine_init(MachineState *machine,
+void raspi_base_machine_init(MachineState *machine,
BCM283XBaseState *soc)
{
RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
uint32_t board_rev = mc->board_rev;
uint64_t ram_size = board_ram_size(board_rev);
- uint32_t vcram_size;
+ uint32_t vcram_base, vcram_size;
+ size_t boot_ram_size;
DriveInfo *di;
BlockBackend *blk;
BusState *bus;
@@ -293,11 +292,20 @@ static void raspi_base_machine_init(MachineState *machine,
vcram_size = object_property_get_uint(OBJECT(soc), "vcram-size",
&error_abort);
+ vcram_base = object_property_get_uint(OBJECT(soc), "vcram-base",
+ &error_abort);
+ if (!vcram_base) {
+ boot_ram_size = (ram_size > UPPER_RAM_BASE ? UPPER_RAM_BASE : ram_size)
+ - vcram_size;
+ } else {
+ boot_ram_size = (vcram_base + vcram_size > UPPER_RAM_BASE ?
+ UPPER_RAM_BASE - vcram_size : vcram_base);
+ }
setup_boot(machine, &soc->cpu[0].core, board_processor_id(board_rev),
- machine->ram_size - vcram_size);
+ boot_ram_size);
}
-static void raspi_machine_init(MachineState *machine)
+void raspi_machine_init(MachineState *machine)
{
RaspiMachineState *s = RASPI_MACHINE(machine);
RaspiBaseMachineState *s_base = RASPI_BASE_MACHINE(machine);
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
new file mode 100644
index 0000000000..2d33861c57
--- /dev/null
+++ b/hw/arm/raspi4b.c
@@ -0,0 +1,72 @@
+/*
+ * Raspberry Pi 4B emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/cutils.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "hw/arm/raspi_platform.h"
+#include "hw/display/bcm2835_fb.h"
+#include "hw/registerfields.h"
+#include "qemu/error-report.h"
+#include "sysemu/device_tree.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "hw/arm/boot.h"
+#include "qom/object.h"
+#include "hw/arm/bcm2838.h"
+
+#define TYPE_RASPI4B_MACHINE MACHINE_TYPE_NAME("raspi4b-2g")
+OBJECT_DECLARE_SIMPLE_TYPE(Raspi4bMachineState, RASPI4B_MACHINE)
+
+struct Raspi4bMachineState {
+ /*< private >*/
+ RaspiBaseMachineState parent_obj;
+ /*< public >*/
+ BCM2838State soc;
+};
+
+static void raspi4b_machine_init(MachineState *machine)
+{
+ Raspi4bMachineState *s = RASPI4B_MACHINE(machine);
+ RaspiBaseMachineState *s_base = RASPI_BASE_MACHINE(machine);
+ RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
+ BCM2838State *soc = &s->soc;
+
+ s_base->binfo.board_id = mc->board_rev;
+
+ object_initialize_child(OBJECT(machine), "soc", soc,
+ board_soc_type(mc->board_rev));
+
+ raspi_base_machine_init(machine, &soc->parent_obj);
+}
+
+static void raspi4b_machine_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ RaspiBaseMachineClass *rmc = RASPI_BASE_MACHINE_CLASS(oc);
+
+ rmc->board_rev = 0xb03115; /* Revision 1.5, 2 Gb RAM */
+ raspi_machine_class_common_init(mc, rmc->board_rev);
+ mc->init = raspi4b_machine_init;
+}
+
+static const TypeInfo raspi4b_machine_type = {
+ .name = TYPE_RASPI4B_MACHINE,
+ .parent = TYPE_RASPI_BASE_MACHINE,
+ .instance_size = sizeof(Raspi4bMachineState),
+ .class_init = raspi4b_machine_class_init,
+};
+
+static void raspi4b_machine_register_type(void)
+{
+ type_register_static(&raspi4b_machine_type);
+}
+
+type_init(raspi4b_machine_register_type)
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 3018e8fcf3..45003e2425 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -49,6 +49,17 @@ struct RaspiBaseMachineClass {
uint32_t board_rev;
};
+/* Common functions for raspberry pi machines */
+const char *board_soc_type(uint32_t board_rev);
+void raspi_machine_init(MachineState *machine);
+
+typedef struct BCM283XBaseState BCM283XBaseState;
+void raspi_base_machine_init(MachineState *machine,
+ BCM283XBaseState *soc);
+
+void raspi_machine_class_common_init(MachineClass *mc,
+ uint32_t board_rev);
+
#define MSYNC_OFFSET 0x0000 /* Multicore Sync Block */
#define CCPT_OFFSET 0x1000 /* Compact Camera Port 2 TX */
#define INTE_OFFSET 0x2000 /* VC Interrupt controller */
diff --git a/include/hw/display/bcm2835_fb.h b/include/hw/display/bcm2835_fb.h
index 38671afffd..49541bf08f 100644
--- a/include/hw/display/bcm2835_fb.h
+++ b/include/hw/display/bcm2835_fb.h
@@ -16,6 +16,8 @@
#include "ui/console.h"
#include "qom/object.h"
+#define UPPER_RAM_BASE 0x40000000
+
#define TYPE_BCM2835_FB "bcm2835-fb"
OBJECT_DECLARE_SIMPLE_TYPE(BCM2835FBState, BCM2835_FB)
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 11/45] Introduce Raspberry PI 4 machine
2023-12-08 2:31 ` [PATCH v4 11/45] Introduce Raspberry PI 4 machine Sergey Kambalin
@ 2024-01-15 12:32 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 12:32 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> @@ -329,11 +330,24 @@ void bcm_soc_peripherals_common_realize(DeviceState *dev, Error **errp)
> return;
> }
>
> - if (!object_property_set_uint(OBJECT(&s->fb), "vcram-base",
> - ram_size - vcram_size, errp)) {
> + vcram_base = object_property_get_uint(OBJECT(s), "vcram-base", &err);
> + if (err) {
> + error_propagate(errp, err);
> return;
> }
>
> + if (vcram_base == 0) {
> + vcram_base = (ram_size > UPPER_RAM_BASE ? UPPER_RAM_BASE : ram_size)
> + - vcram_size;
> + } else {
> + if (vcram_base + vcram_size > UPPER_RAM_BASE) {
> + vcram_base = UPPER_RAM_BASE - vcram_size;
> + }
> + }
I think this might be slightly clearer written as:
if (vcram_base == 0) {
vcram_base = ram_size - vcram_size;
}
vcram_base = MIN(vcram_base, UPPER_RAM_BASE - vcram_size);
> + if (!object_property_set_uint(OBJECT(&s->fb), "vcram-base", vcram_base,
> + errp)) {
> + return;
> + }
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->fb), errp)) {
> return;
> }
> @@ -293,11 +292,20 @@ static void raspi_base_machine_init(MachineState *machine,
>
> vcram_size = object_property_get_uint(OBJECT(soc), "vcram-size",
> &error_abort);
> + vcram_base = object_property_get_uint(OBJECT(soc), "vcram-base",
> + &error_abort);
> + if (!vcram_base) {
> + boot_ram_size = (ram_size > UPPER_RAM_BASE ? UPPER_RAM_BASE : ram_size)
> + - vcram_size;
> + } else {
> + boot_ram_size = (vcram_base + vcram_size > UPPER_RAM_BASE ?
> + UPPER_RAM_BASE - vcram_size : vcram_base);
> + }
This also could be written
if (vcram_base == 0) {
vcram_base = ram_size - vcram_size;
}
vcram_base = MIN(vcram_base, UPPER_RAM_BASE - vcram_size);
boot_ram_size = vcram_base;
> setup_boot(machine, &soc->cpu[0].core, board_processor_id(board_rev),
> - machine->ram_size - vcram_size);
> + boot_ram_size);
> }
> +struct Raspi4bMachineState {
> + /*< private >*/
> + RaspiBaseMachineState parent_obj;
> + /*< public >*/
> + BCM2838State soc;
> +};
Our coding style no longer requires the 'private' and 'public'
marker comments, so you can drop them.
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 12/45] Temporarily disable unimplemented rpi4b devices
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (10 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 11/45] Introduce Raspberry PI 4 machine Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 12:37 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 13/45] Add memory region for BCM2837 RPiVid ASB Sergey Kambalin
` (34 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
This commit adds RPi4B device tree modifications:
- disable pcie, rng200, thermal sensor and genet devices
(they're going to be re-enabled in the following commits)
- create additional memory region in device tree
if RAM amount exceeds VC base address.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/raspi.c | 5 +--
hw/arm/raspi4b.c | 60 +++++++++++++++++++++++++++++++++
include/hw/arm/raspi_platform.h | 4 +++
3 files changed, 65 insertions(+), 4 deletions(-)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index da1e9e7c13..895c305122 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -37,9 +37,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(RaspiMachineState, RASPI_MACHINE)
#define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */
-/* Registered machine type (matches RPi Foundation bootloader and U-Boot) */
-#define MACH_TYPE_BCM2708 3138
-
struct RaspiMachineState {
/*< private >*/
RaspiBaseMachineState parent_obj;
@@ -75,7 +72,7 @@ static const struct {
[PROCESSOR_ID_BCM2838] = {TYPE_BCM2838, BCM283X_NCPUS},
};
-static uint64_t board_ram_size(uint32_t board_rev)
+uint64_t board_ram_size(uint32_t board_rev)
{
assert(FIELD_EX32(board_rev, REV_CODE, STYLE)); /* Only new style */
return 256 * MiB << FIELD_EX32(board_rev, REV_CODE, MEMORY_SIZE);
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index 2d33861c57..10376b62dc 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -21,6 +21,7 @@
#include "hw/arm/boot.h"
#include "qom/object.h"
#include "hw/arm/bcm2838.h"
+#include <libfdt.h>
#define TYPE_RASPI4B_MACHINE MACHINE_TYPE_NAME("raspi4b-2g")
OBJECT_DECLARE_SIMPLE_TYPE(Raspi4bMachineState, RASPI4B_MACHINE)
@@ -32,6 +33,64 @@ struct Raspi4bMachineState {
BCM2838State soc;
};
+/* Add second memory region if board RAM amount exceeds VC base address
+ * (see https://datasheets.raspberrypi.com/bcm2711/bcm2711-peripherals.pdf
+ * 1.2 Address Map)
+ */
+static int raspi_add_memory_node(void *fdt, hwaddr mem_base, hwaddr mem_len)
+{
+ int ret;
+ uint32_t acells, scells;
+ char *nodename = g_strdup_printf("/memory@%" PRIx64, mem_base);
+
+ acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells",
+ NULL, &error_fatal);
+ scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells",
+ NULL, &error_fatal);
+ if (acells == 0 || scells == 0) {
+ fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n");
+ ret = -1;
+ } else {
+ qemu_fdt_add_subnode(fdt, nodename);
+ qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
+ ret = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg",
+ acells, mem_base,
+ scells, mem_len);
+ }
+
+ g_free(nodename);
+ return ret;
+}
+
+static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
+{
+
+ /* Temporarily disable following devices until they are implemented*/
+ const char *to_be_removed_from_dt_as_wa[] = {
+ "brcm,bcm2711-pcie",
+ "brcm,bcm2711-rng200",
+ "brcm,bcm2711-thermal",
+ "brcm,bcm2711-genet-v5",
+ };
+
+ for (int i = 0; i < ARRAY_SIZE(to_be_removed_from_dt_as_wa); i++) {
+ const char *dev_str = to_be_removed_from_dt_as_wa[i];
+
+ int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
+ if (offset >= 0) {
+ if (!fdt_nop_node(fdt, offset)) {
+ warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
+ }
+ }
+ }
+
+ uint64_t ram_size = board_ram_size(info->board_id);
+
+ if (info->ram_size > UPPER_RAM_BASE) {
+ raspi_add_memory_node(fdt, UPPER_RAM_BASE, ram_size - UPPER_RAM_BASE);
+ }
+}
+
static void raspi4b_machine_init(MachineState *machine)
{
Raspi4bMachineState *s = RASPI4B_MACHINE(machine);
@@ -39,6 +98,7 @@ static void raspi4b_machine_init(MachineState *machine)
RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
BCM2838State *soc = &s->soc;
+ s_base->binfo.modify_dtb = raspi4_modify_dtb;
s_base->binfo.board_id = mc->board_rev;
object_initialize_child(OBJECT(machine), "soc", soc,
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 45003e2425..0db146e592 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -31,6 +31,9 @@
#include "hw/boards.h"
#include "hw/arm/boot.h"
+/* Registered machine type (matches RPi Foundation bootloader and U-Boot) */
+#define MACH_TYPE_BCM2708 3138
+
#define TYPE_RASPI_BASE_MACHINE MACHINE_TYPE_NAME("raspi-base")
OBJECT_DECLARE_TYPE(RaspiBaseMachineState, RaspiBaseMachineClass,
RASPI_BASE_MACHINE)
@@ -59,6 +62,7 @@ void raspi_base_machine_init(MachineState *machine,
void raspi_machine_class_common_init(MachineClass *mc,
uint32_t board_rev);
+uint64_t board_ram_size(uint32_t board_rev);
#define MSYNC_OFFSET 0x0000 /* Multicore Sync Block */
#define CCPT_OFFSET 0x1000 /* Compact Camera Port 2 TX */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 12/45] Temporarily disable unimplemented rpi4b devices
2023-12-08 2:31 ` [PATCH v4 12/45] Temporarily disable unimplemented rpi4b devices Sergey Kambalin
@ 2024-01-15 12:37 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 12:37 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> This commit adds RPi4B device tree modifications:
> - disable pcie, rng200, thermal sensor and genet devices
> (they're going to be re-enabled in the following commits)
> - create additional memory region in device tree
> if RAM amount exceeds VC base address.
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/raspi.c | 5 +--
> hw/arm/raspi4b.c | 60 +++++++++++++++++++++++++++++++++
> include/hw/arm/raspi_platform.h | 4 +++
> 3 files changed, 65 insertions(+), 4 deletions(-)
>
> diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
> index da1e9e7c13..895c305122 100644
> --- a/hw/arm/raspi.c
> +++ b/hw/arm/raspi.c
> @@ -37,9 +37,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(RaspiMachineState, RASPI_MACHINE)
> #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
> #define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */
>
> -/* Registered machine type (matches RPi Foundation bootloader and U-Boot) */
> -#define MACH_TYPE_BCM2708 3138
> -
> struct RaspiMachineState {
> /*< private >*/
> RaspiBaseMachineState parent_obj;
> @@ -75,7 +72,7 @@ static const struct {
> [PROCESSOR_ID_BCM2838] = {TYPE_BCM2838, BCM283X_NCPUS},
> };
>
> -static uint64_t board_ram_size(uint32_t board_rev)
> +uint64_t board_ram_size(uint32_t board_rev)
> {
> assert(FIELD_EX32(board_rev, REV_CODE, STYLE)); /* Only new style */
> return 256 * MiB << FIELD_EX32(board_rev, REV_CODE, MEMORY_SIZE);
> diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
> index 2d33861c57..10376b62dc 100644
> --- a/hw/arm/raspi4b.c
> +++ b/hw/arm/raspi4b.c
> @@ -21,6 +21,7 @@
> #include "hw/arm/boot.h"
> #include "qom/object.h"
> #include "hw/arm/bcm2838.h"
> +#include <libfdt.h>
>
> #define TYPE_RASPI4B_MACHINE MACHINE_TYPE_NAME("raspi4b-2g")
> OBJECT_DECLARE_SIMPLE_TYPE(Raspi4bMachineState, RASPI4B_MACHINE)
> @@ -32,6 +33,64 @@ struct Raspi4bMachineState {
> BCM2838State soc;
> };
>
> +/* Add second memory region if board RAM amount exceeds VC base address
> + * (see https://datasheets.raspberrypi.com/bcm2711/bcm2711-peripherals.pdf
> + * 1.2 Address Map)
> + */
Our coding style says that for multiline comments the initial
"/*" should be on a line of its own.
> +static int raspi_add_memory_node(void *fdt, hwaddr mem_base, hwaddr mem_len)
> +{
> + int ret;
> + uint32_t acells, scells;
> + char *nodename = g_strdup_printf("/memory@%" PRIx64, mem_base);
> +
> + acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells",
> + NULL, &error_fatal);
> + scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells",
> + NULL, &error_fatal);
> + if (acells == 0 || scells == 0) {
> + fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n");
> + ret = -1;
> + } else {
> + qemu_fdt_add_subnode(fdt, nodename);
> + qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
> + ret = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg",
> + acells, mem_base,
> + scells, mem_len);
> + }
> +
> + g_free(nodename);
> + return ret;
> +}
> +
> +static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
> +{
> +
> + /* Temporarily disable following devices until they are implemented*/
Missing space before "*/"
> + const char *to_be_removed_from_dt_as_wa[] = {
> + "brcm,bcm2711-pcie",
> + "brcm,bcm2711-rng200",
> + "brcm,bcm2711-thermal",
> + "brcm,bcm2711-genet-v5",
> + };
What does the "_as_wa" part of this variable name mean ?
Since it's local to this function we don't need to use a
super long variable name to keep it distinct; I think
something like "nodes_to_remove" would be fine.
> +
> + for (int i = 0; i < ARRAY_SIZE(to_be_removed_from_dt_as_wa); i++) {
> + const char *dev_str = to_be_removed_from_dt_as_wa[i];
> +
> + int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
> + if (offset >= 0) {
> + if (!fdt_nop_node(fdt, offset)) {
> + warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
> + }
> + }
> + }
> +
> + uint64_t ram_size = board_ram_size(info->board_id);
Variable declarations should always be at the start of a
code block, not in the middle.
> +
> + if (info->ram_size > UPPER_RAM_BASE) {
> + raspi_add_memory_node(fdt, UPPER_RAM_BASE, ram_size - UPPER_RAM_BASE);
> + }
> +}
> +
> static void raspi4b_machine_init(MachineState *machine)
> {
> Raspi4bMachineState *s = RASPI4B_MACHINE(machine);
> @@ -39,6 +98,7 @@ static void raspi4b_machine_init(MachineState *machine)
> RaspiBaseMachineClass *mc = RASPI_BASE_MACHINE_GET_CLASS(machine);
> BCM2838State *soc = &s->soc;
>
> + s_base->binfo.modify_dtb = raspi4_modify_dtb;
> s_base->binfo.board_id = mc->board_rev;
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 13/45] Add memory region for BCM2837 RPiVid ASB
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (11 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 12/45] Temporarily disable unimplemented rpi4b devices Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 13:12 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 14/45] Add BCM2838 PCIE Root Complex Sergey Kambalin
` (33 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 3 +++
include/hw/arm/bcm2838_peripherals.h | 3 ++-
include/hw/arm/raspi_platform.h | 1 +
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 196fb890a2..d3b42cf25b 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -182,6 +182,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
+
+ /* BCM2838 RPiVid ASB must be mapped to prevent kernel crash */
+ create_unimp(s_base, &s->asb, "bcm2838-asb", RPI4B_ASB_OFFSET, 0x24);
}
static void bcm2838_peripherals_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 0a87645e01..af085934c9 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -64,12 +64,13 @@ struct BCM2838PeripheralState {
MemoryRegion mphi_mr_alias;
SDHCIState emmc2;
- UnimplementedDeviceState clkisp;
BCM2838GpioState gpio;
OrIRQState mmc_irq_orgate;
OrIRQState dma_7_8_irq_orgate;
OrIRQState dma_9_10_irq_orgate;
+
+ UnimplementedDeviceState asb;
};
struct BCM2838PeripheralClass {
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 0db146e592..537fc6b4af 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -74,6 +74,7 @@ uint64_t board_ram_size(uint32_t board_rev);
#define DMA_OFFSET 0x7000 /* DMA controller, channels 0-14 */
#define ARBA_OFFSET 0x9000
#define BRDG_OFFSET 0xa000
+#define RPI4B_ASB_OFFSET 0xa000 /* BCM2838 (BCM2711) RPiVid ASB */
#define ARM_OFFSET 0xB000 /* ARM control block */
#define ARMCTRL_OFFSET (ARM_OFFSET + 0x000)
#define ARMCTRL_IC_OFFSET (ARM_OFFSET + 0x200) /* Interrupt controller */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 13/45] Add memory region for BCM2837 RPiVid ASB
2023-12-08 2:31 ` [PATCH v4 13/45] Add memory region for BCM2837 RPiVid ASB Sergey Kambalin
@ 2024-01-15 13:12 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 13:12 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_peripherals.c | 3 +++
> include/hw/arm/bcm2838_peripherals.h | 3 ++-
> include/hw/arm/raspi_platform.h | 1 +
> 3 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index 196fb890a2..d3b42cf25b 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -182,6 +182,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
>
> object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
> +
> + /* BCM2838 RPiVid ASB must be mapped to prevent kernel crash */
> + create_unimp(s_base, &s->asb, "bcm2838-asb", RPI4B_ASB_OFFSET, 0x24);
> }
>
> static void bcm2838_peripherals_class_init(ObjectClass *oc, void *data)
> diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
> index 0a87645e01..af085934c9 100644
> --- a/include/hw/arm/bcm2838_peripherals.h
> +++ b/include/hw/arm/bcm2838_peripherals.h
> @@ -64,12 +64,13 @@ struct BCM2838PeripheralState {
> MemoryRegion mphi_mr_alias;
>
> SDHCIState emmc2;
> - UnimplementedDeviceState clkisp;
This seems like it should be in some other patch ?
> BCM2838GpioState gpio;
>
> OrIRQState mmc_irq_orgate;
> OrIRQState dma_7_8_irq_orgate;
> OrIRQState dma_9_10_irq_orgate;
> +
> + UnimplementedDeviceState asb;
> };
>
> struct BCM2838PeripheralClass {
> diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
> index 0db146e592..537fc6b4af 100644
> --- a/include/hw/arm/raspi_platform.h
> +++ b/include/hw/arm/raspi_platform.h
> @@ -74,6 +74,7 @@ uint64_t board_ram_size(uint32_t board_rev);
> #define DMA_OFFSET 0x7000 /* DMA controller, channels 0-14 */
> #define ARBA_OFFSET 0x9000
> #define BRDG_OFFSET 0xa000
> +#define RPI4B_ASB_OFFSET 0xa000 /* BCM2838 (BCM2711) RPiVid ASB */
I think the existing BRDG_OFFSET was intended to be the
define for the address of this bridge device, so we can just use
it rather than adding a new define.
> #define ARM_OFFSET 0xB000 /* ARM control block */
> #define ARMCTRL_OFFSET (ARM_OFFSET + 0x000)
> #define ARMCTRL_IC_OFFSET (ARM_OFFSET + 0x200) /* Interrupt controller */
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 14/45] Add BCM2838 PCIE Root Complex
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (12 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 13/45] Add memory region for BCM2837 RPiVid ASB Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 13:57 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 15/45] Add BCM2838 PCIE host Sergey Kambalin
` (32 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_pcie.c | 74 +++++++++++++++++++++++++++++++++++
hw/arm/meson.build | 5 ++-
hw/arm/trace-events | 4 ++
include/hw/arm/bcm2838_pcie.h | 53 +++++++++++++++++++++++++
4 files changed, 135 insertions(+), 1 deletion(-)
create mode 100644 hw/arm/bcm2838_pcie.c
create mode 100644 include/hw/arm/bcm2838_pcie.h
diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
new file mode 100644
index 0000000000..3b4373c6a6
--- /dev/null
+++ b/hw/arm/bcm2838_pcie.c
@@ -0,0 +1,74 @@
+/*
+ * BCM2838 PCIe Root Complex emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "hw/irq.h"
+#include "hw/pci-host/gpex.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+#include "qemu/module.h"
+#include "hw/arm/bcm2838_pcie.h"
+#include "trace.h"
+
+/*
+ * RC root part (D0:F0)
+ */
+
+static void bcm2838_pcie_root_reg_reset(PCIDevice *dev)
+{
+ BCM2838PcieRootState *s = BCM2838_PCIE_ROOT(dev);
+ memset(s->regs, 0xFF, sizeof(s->regs));
+}
+
+static void bcm2838_pcie_root_realize(PCIDevice *dev, Error **errp) {
+ bcm2838_pcie_root_reg_reset(dev);
+}
+
+static void bcm2838_pcie_root_init(Object *obj)
+{
+ PCIBridge *br = PCI_BRIDGE(obj);
+ br->bus_name = "pcie.1";
+}
+
+static void bcm2838_pcie_root_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(class);
+ BCM2838PcieRootClass *brpc = BCM2838_PCIE_ROOT_CLASS(class);
+
+ dc->desc = "BCM2711 PCIe Bridge";
+ /*
+ * PCI-facing part of the host bridge, not usable without the host-facing
+ * part, which can't be device_add'ed.
+ */
+ dc->user_creatable = false;
+ k->vendor_id = BCM2838_PCIE_VENDOR_ID;
+ k->device_id = BCM2838_PCIE_DEVICE_ID;
+ k->revision = BCM2838_PCIE_REVISION;
+ brpc->parent_obj.exp_offset = BCM2838_PCIE_EXP_CAP_OFFSET;
+ brpc->parent_obj.aer_offset = BCM2838_PCIE_AER_CAP_OFFSET;
+ brpc->parent_realize = k->realize;
+ k->realize = bcm2838_pcie_root_realize;
+}
+
+static const TypeInfo bcm2838_pcie_root_info = {
+ .name = TYPE_BCM2838_PCIE_ROOT,
+ .parent = TYPE_PCIE_ROOT_PORT,
+ .instance_size = sizeof(BCM2838PcieRootState),
+ .instance_init = bcm2838_pcie_root_init,
+ .class_init = bcm2838_pcie_root_class_init,
+};
+
+static void bcm2838_pcie_register(void)
+{
+ type_register_static(&bcm2838_pcie_root_info);
+}
+
+type_init(bcm2838_pcie_register)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 27e6797de2..b26ed13c6f 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -39,7 +39,10 @@ arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubi
arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bananapi_m2u.c'))
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
-arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files('bcm2838.c', 'raspi4b.c'))
+arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files(
+ 'bcm2838.c',
+ 'bcm2838_pcie.c',
+ 'raspi4b.c'))
arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
diff --git a/hw/arm/trace-events b/hw/arm/trace-events
index 4f0167e638..6cfab31539 100644
--- a/hw/arm/trace-events
+++ b/hw/arm/trace-events
@@ -55,5 +55,9 @@ smmuv3_notify_flag_add(const char *iommu) "ADD SMMUNotifier node for iommu mr=%s
smmuv3_notify_flag_del(const char *iommu) "DEL SMMUNotifier node for iommu mr=%s"
smmuv3_inv_notifiers_iova(const char *name, uint16_t asid, uint16_t vmid, uint64_t iova, uint8_t tg, uint64_t num_pages) "iommu mr=%s asid=%d vmid=%d iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64
+# bcm2838_pcie.c
+bcm2838_pcie_host_read(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
+bcm2838_pcie_host_write(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
+
# bcm2838.c
bcm2838_gic_set_irq(int irq, int level) "gic irq:%d lvl:%d"
diff --git a/include/hw/arm/bcm2838_pcie.h b/include/hw/arm/bcm2838_pcie.h
new file mode 100644
index 0000000000..39828f817f
--- /dev/null
+++ b/include/hw/arm/bcm2838_pcie.h
@@ -0,0 +1,53 @@
+/*
+ * BCM2838 PCIe Root Complex emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef BCM2838_PCIE_H
+#define BCM2838_PCIE_H
+
+#include "exec/hwaddr.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pcie_host.h"
+#include "hw/pci/pcie_port.h"
+#include "qom/object.h"
+
+#define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
+OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
+ BCM2838_PCIE_ROOT)
+
+#define BCM2838_PCIE_VENDOR_ID 0x14E4
+#define BCM2838_PCIE_DEVICE_ID 0x2711
+#define BCM2838_PCIE_REVISION 20
+
+#define BCM2838_PCIE_REGS_SIZE 0x9310
+#define BCM2838_PCIE_NUM_IRQS 4
+
+#define BCM2838_PCIE_EXP_CAP_OFFSET 0xAC
+#define BCM2838_PCIE_AER_CAP_OFFSET 0x100
+
+#define BCM2838_PCIE_EXT_CFG_DATA 0x8000
+#define BCM2838_PCIE_EXT_CFG_INDEX 0x9000
+
+struct BCM2838PcieRootState {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ /*< public >*/
+ uint8_t regs[BCM2838_PCIE_REGS_SIZE - PCIE_CONFIG_SPACE_SIZE];
+};
+
+struct BCM2838PcieRootClass {
+ /*< private >*/
+ PCIERootPortClass parent_obj;
+
+ /*< public >*/
+ void (*parent_realize)(PCIDevice *dev, Error **errp);
+};
+
+
+#endif /* BCM2838_PCIE_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 14/45] Add BCM2838 PCIE Root Complex
2023-12-08 2:31 ` [PATCH v4 14/45] Add BCM2838 PCIE Root Complex Sergey Kambalin
@ 2024-01-15 13:57 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 13:57 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:40, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_pcie.c | 74 +++++++++++++++++++++++++++++++++++
> hw/arm/meson.build | 5 ++-
> hw/arm/trace-events | 4 ++
> include/hw/arm/bcm2838_pcie.h | 53 +++++++++++++++++++++++++
> 4 files changed, 135 insertions(+), 1 deletion(-)
> create mode 100644 hw/arm/bcm2838_pcie.c
> create mode 100644 include/hw/arm/bcm2838_pcie.h
>
> diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
> new file mode 100644
> index 0000000000..3b4373c6a6
> --- /dev/null
> +++ b/hw/arm/bcm2838_pcie.c
> @@ -0,0 +1,74 @@
> +/*
> + * BCM2838 PCIe Root Complex emulation
> + *
> + * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "qapi/error.h"
> +#include "hw/irq.h"
> +#include "hw/pci-host/gpex.h"
> +#include "hw/qdev-properties.h"
> +#include "migration/vmstate.h"
> +#include "qemu/module.h"
> +#include "hw/arm/bcm2838_pcie.h"
> +#include "trace.h"
> +
> +/*
> + * RC root part (D0:F0)
> + */
> +
> +static void bcm2838_pcie_root_reg_reset(PCIDevice *dev)
> +{
> + BCM2838PcieRootState *s = BCM2838_PCIE_ROOT(dev);
> + memset(s->regs, 0xFF, sizeof(s->regs));
> +}
> +
> +static void bcm2838_pcie_root_realize(PCIDevice *dev, Error **errp) {
> + bcm2838_pcie_root_reg_reset(dev);
Realize methods shouldn't call reset, that should be
handled automatically.
> +}
> +
> +static void bcm2838_pcie_root_init(Object *obj)
> +{
> + PCIBridge *br = PCI_BRIDGE(obj);
> + br->bus_name = "pcie.1";
> +}
> +
> +static void bcm2838_pcie_root_class_init(ObjectClass *class, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(class);
> + PCIDeviceClass *k = PCI_DEVICE_CLASS(class);
> + BCM2838PcieRootClass *brpc = BCM2838_PCIE_ROOT_CLASS(class);
> +
> + dc->desc = "BCM2711 PCIe Bridge";
> + /*
> + * PCI-facing part of the host bridge, not usable without the host-facing
> + * part, which can't be device_add'ed.
> + */
> + dc->user_creatable = false;
> + k->vendor_id = BCM2838_PCIE_VENDOR_ID;
> + k->device_id = BCM2838_PCIE_DEVICE_ID;
> + k->revision = BCM2838_PCIE_REVISION;
> + brpc->parent_obj.exp_offset = BCM2838_PCIE_EXP_CAP_OFFSET;
> + brpc->parent_obj.aer_offset = BCM2838_PCIE_AER_CAP_OFFSET;
> + brpc->parent_realize = k->realize;
> + k->realize = bcm2838_pcie_root_realize;
This seems to not have anything that sets up a reset
handler. (See hw/pci-host/pnv_phb.c:pnv_phb_root_port_class_init()
for an example of a root port with a reset handler.)
> +}
> +
> +static const TypeInfo bcm2838_pcie_root_info = {
> + .name = TYPE_BCM2838_PCIE_ROOT,
> + .parent = TYPE_PCIE_ROOT_PORT,
> + .instance_size = sizeof(BCM2838PcieRootState),
> + .instance_init = bcm2838_pcie_root_init,
> + .class_init = bcm2838_pcie_root_class_init,
> +};
> +
> +static void bcm2838_pcie_register(void)
> +{
> + type_register_static(&bcm2838_pcie_root_info);
> +}
> +
> +type_init(bcm2838_pcie_register)
> diff --git a/hw/arm/meson.build b/hw/arm/meson.build
> index 27e6797de2..b26ed13c6f 100644
> --- a/hw/arm/meson.build
> +++ b/hw/arm/meson.build
> @@ -39,7 +39,10 @@ arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubi
> arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
> arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bananapi_m2u.c'))
> arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
> -arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files('bcm2838.c', 'raspi4b.c'))
> +arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files(
> + 'bcm2838.c',
> + 'bcm2838_pcie.c',
> + 'raspi4b.c'))
> arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
> arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
> arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
> diff --git a/hw/arm/trace-events b/hw/arm/trace-events
> index 4f0167e638..6cfab31539 100644
> --- a/hw/arm/trace-events
> +++ b/hw/arm/trace-events
> @@ -55,5 +55,9 @@ smmuv3_notify_flag_add(const char *iommu) "ADD SMMUNotifier node for iommu mr=%s
> smmuv3_notify_flag_del(const char *iommu) "DEL SMMUNotifier node for iommu mr=%s"
> smmuv3_inv_notifiers_iova(const char *name, uint16_t asid, uint16_t vmid, uint64_t iova, uint8_t tg, uint64_t num_pages) "iommu mr=%s asid=%d vmid=%d iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64
>
> +# bcm2838_pcie.c
> +bcm2838_pcie_host_read(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
> +bcm2838_pcie_host_write(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04"PRIx64": 0x%016"PRIx64
> +
These trace events aren't used in this patch, so should presumably be
in the following patch.
> # bcm2838.c
> bcm2838_gic_set_irq(int irq, int level) "gic irq:%d lvl:%d"
> diff --git a/include/hw/arm/bcm2838_pcie.h b/include/hw/arm/bcm2838_pcie.h
> new file mode 100644
> index 0000000000..39828f817f
> --- /dev/null
> +++ b/include/hw/arm/bcm2838_pcie.h
> @@ -0,0 +1,53 @@
> +/*
> + * BCM2838 PCIe Root Complex emulation
> + *
> + * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef BCM2838_PCIE_H
> +#define BCM2838_PCIE_H
> +
> +#include "exec/hwaddr.h"
> +#include "hw/sysbus.h"
> +#include "hw/pci/pci.h"
> +#include "hw/pci/pcie_host.h"
> +#include "hw/pci/pcie_port.h"
> +#include "qom/object.h"
> +
> +#define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
> +OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
> + BCM2838_PCIE_ROOT)
> +
> +#define BCM2838_PCIE_VENDOR_ID 0x14E4
> +#define BCM2838_PCIE_DEVICE_ID 0x2711
> +#define BCM2838_PCIE_REVISION 20
> +
> +#define BCM2838_PCIE_REGS_SIZE 0x9310
> +#define BCM2838_PCIE_NUM_IRQS 4
> +
> +#define BCM2838_PCIE_EXP_CAP_OFFSET 0xAC
> +#define BCM2838_PCIE_AER_CAP_OFFSET 0x100
> +
> +#define BCM2838_PCIE_EXT_CFG_DATA 0x8000
> +#define BCM2838_PCIE_EXT_CFG_INDEX 0x9000
> +
> +struct BCM2838PcieRootState {
> + /*< private >*/
> + PCIESlot parent_obj;
> +
> + /*< public >*/
> + uint8_t regs[BCM2838_PCIE_REGS_SIZE - PCIE_CONFIG_SPACE_SIZE];
> +};
> +
> +struct BCM2838PcieRootClass {
> + /*< private >*/
> + PCIERootPortClass parent_obj;
> +
> + /*< public >*/
> + void (*parent_realize)(PCIDevice *dev, Error **errp);
> +};
> +
> +
> +#endif /* BCM2838_PCIE_H */
> --
> 2.34.1
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 15/45] Add BCM2838 PCIE host
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (13 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 14/45] Add BCM2838 PCIE Root Complex Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:08 ` Peter Maydell
2024-01-29 3:18 ` Sergei Kambalin
2023-12-08 2:31 ` [PATCH v4 16/45] Enable BCM2838 PCIE Sergey Kambalin
` (31 subsequent siblings)
46 siblings, 2 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_pcie.c | 216 +++++++++++++++++++++++++++++++++-
include/hw/arm/bcm2838_pcie.h | 22 ++++
2 files changed, 236 insertions(+), 2 deletions(-)
diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
index 3b4373c6a6..75146d6c2e 100644
--- a/hw/arm/bcm2838_pcie.c
+++ b/hw/arm/bcm2838_pcie.c
@@ -12,11 +12,222 @@
#include "hw/irq.h"
#include "hw/pci-host/gpex.h"
#include "hw/qdev-properties.h"
-#include "migration/vmstate.h"
-#include "qemu/module.h"
#include "hw/arm/bcm2838_pcie.h"
#include "trace.h"
+/*
+ * RC host part
+ */
+
+static uint64_t bcm2838_pcie_host_read(void *opaque, hwaddr offset,
+ unsigned size) {
+ hwaddr mmcfg_addr;
+ uint64_t value = ~0;
+ BCM2838PcieHostState *s = opaque;
+ PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
+ PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
+ uint8_t *root_regs = s->root_port.regs;
+ uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
+ - PCIE_CONFIG_SPACE_SIZE);
+
+ if (offset < PCIE_CONFIG_SPACE_SIZE) {
+ value = pci_host_config_read_common(root_pci_dev, offset,
+ PCIE_CONFIG_SPACE_SIZE, size);
+ } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
+ <= sizeof(s->root_port.regs)) {
+ switch (offset) {
+ case BCM2838_PCIE_EXT_CFG_DATA
+ ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
+ mmcfg_addr = *cfg_idx
+ | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
+ value = pcie_hb->mmio.ops->read(opaque, mmcfg_addr, size);
+ break;
+ default:
+ memcpy(&value, root_regs + offset - PCIE_CONFIG_SPACE_SIZE, size);
+ }
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
+
+ trace_bcm2838_pcie_host_read(size, offset, value);
+ return value;
+}
+
+static void bcm2838_pcie_host_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size) {
+ hwaddr mmcfg_addr;
+ BCM2838PcieHostState *s = opaque;
+ PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
+ PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
+ uint8_t *root_regs = s->root_port.regs;
+ uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
+ - PCIE_CONFIG_SPACE_SIZE);
+
+ trace_bcm2838_pcie_host_write(size, offset, value);
+
+ if (offset < PCIE_CONFIG_SPACE_SIZE) {
+ pci_host_config_write_common(root_pci_dev, offset,
+ PCIE_CONFIG_SPACE_SIZE, value, size);
+ } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
+ <= sizeof(s->root_port.regs)) {
+ switch (offset) {
+ case BCM2838_PCIE_EXT_CFG_DATA
+ ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
+ mmcfg_addr = *cfg_idx
+ | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
+ pcie_hb->mmio.ops->write(opaque, mmcfg_addr, value, size);
+ break;
+ default:
+ memcpy(root_regs + offset - PCIE_CONFIG_SPACE_SIZE, &value, size);
+ }
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
+}
+
+static const MemoryRegionOps bcm2838_pcie_host_ops = {
+ .read = bcm2838_pcie_host_read,
+ .write = bcm2838_pcie_host_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = sizeof(uint64_t)},
+};
+
+int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi)
+{
+ if (index >= BCM2838_PCIE_NUM_IRQS) {
+ return -EINVAL;
+ }
+
+ s->irq_num[index] = spi;
+ return 0;
+}
+
+static void bcm2838_pcie_host_set_irq(void *opaque, int irq_num, int level)
+{
+ BCM2838PcieHostState *s = opaque;
+
+ qemu_set_irq(s->irq[irq_num], level);
+}
+
+static PCIINTxRoute bcm2838_pcie_host_route_intx_pin_to_irq(void *opaque,
+ int pin)
+{
+ PCIINTxRoute route;
+ BCM2838PcieHostState *s = opaque;
+
+ route.irq = s->irq_num[pin];
+ route.mode = route.irq < 0 ? PCI_INTX_DISABLED : PCI_INTX_ENABLED;
+
+ return route;
+}
+
+static int bcm2838_pcie_host_map_irq(PCIDevice *pci_dev, int pin)
+{
+ return pin;
+}
+
+static void bcm2838_pcie_host_realize(DeviceState *dev, Error **errp)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(dev);
+ BCM2838PcieHostState *s = BCM2838_PCIE_HOST(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+ int i;
+
+ memory_region_init_io(&s->cfg_regs, OBJECT(s), &bcm2838_pcie_host_ops, s,
+ "bcm2838_pcie_cfg_regs", BCM2838_PCIE_REGS_SIZE);
+ sysbus_init_mmio(sbd, &s->cfg_regs);
+
+ /*
+ * The MemoryRegions io_mmio and io_ioport that we pass to
+ * pci_register_root_bus() are not the same as the MemoryRegions
+ * io_mmio_window and io_ioport_window that we expose as SysBus MRs.
+ * The difference is in the behavior of accesses to addresses where no PCI
+ * device has been mapped.
+ *
+ * io_mmio and io_ioport are the underlying PCI view of the PCI address
+ * space, and when a PCI device does a bus master access to a bad address
+ * this is reported back to it as a transaction failure.
+ *
+ * io_mmio_window and io_ioport_window implement "unmapped addresses read as
+ * -1 and ignore writes"; this is a traditional x86 PC behavior, which is
+ * not mandated properly by the PCI spec but expected by the majority of
+ * PCI-using guest software, including Linux.
+ *
+ * We implement it in the PCIe host controller, by providing the *_window
+ * MRs, which are containers with io ops that implement the 'background'
+ * behavior and which hold the real PCI MRs as sub-regions.
+ */
+ memory_region_init(&s->io_mmio, OBJECT(s), "bcm2838_pcie_mmio", UINT64_MAX);
+ memory_region_init(&s->io_ioport, OBJECT(s), "bcm2838_pcie_ioport",
+ 64 * 1024);
+
+ memory_region_init_io(&s->io_mmio_window, OBJECT(s),
+ &unassigned_io_ops, OBJECT(s),
+ "bcm2838_pcie_mmio_window", UINT64_MAX);
+ memory_region_init_io(&s->io_ioport_window, OBJECT(s),
+ &unassigned_io_ops, OBJECT(s),
+ "bcm2838_pcie_ioport_window", 64 * 1024);
+
+ memory_region_add_subregion(&s->io_mmio_window, 0, &s->io_mmio);
+ memory_region_add_subregion(&s->io_ioport_window, 0, &s->io_ioport);
+ sysbus_init_mmio(sbd, &s->io_mmio_window);
+ sysbus_init_mmio(sbd, &s->io_ioport_window);
+
+ for (i = 0; i < BCM2838_PCIE_NUM_IRQS; i++) {
+ sysbus_init_irq(sbd, &s->irq[i]);
+ s->irq_num[i] = -1;
+ }
+
+ pci->bus = pci_register_root_bus(dev, "pcie.0", bcm2838_pcie_host_set_irq,
+ bcm2838_pcie_host_map_irq, s, &s->io_mmio,
+ &s->io_ioport, 0, BCM2838_PCIE_NUM_IRQS,
+ TYPE_PCIE_BUS);
+ pci_bus_set_route_irq_fn(pci->bus, bcm2838_pcie_host_route_intx_pin_to_irq);
+ qdev_realize(DEVICE(&s->root_port), BUS(pci->bus), &error_fatal);
+}
+
+static const char *bcm2838_pcie_host_root_bus_path(PCIHostState *host_bridge,
+ PCIBus *rootbus)
+{
+ return "0000:00";
+}
+
+static void bcm2838_pcie_host_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
+
+ hc->root_bus_path = bcm2838_pcie_host_root_bus_path;
+ dc->realize = bcm2838_pcie_host_realize;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->fw_name = "pci";
+}
+
+static void bcm2838_pcie_host_initfn(Object *obj)
+{
+ BCM2838PcieHostState *s = BCM2838_PCIE_HOST(obj);
+ BCM2838PcieRootState *root = &s->root_port;
+
+ object_initialize_child(obj, "root_port", root, TYPE_BCM2838_PCIE_ROOT);
+ qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
+ qdev_prop_set_bit(DEVICE(root), "multifunction", false);
+}
+
+static const TypeInfo bcm2838_pcie_host_info = {
+ .name = TYPE_BCM2838_PCIE_HOST,
+ .parent = TYPE_PCIE_HOST_BRIDGE,
+ .instance_size = sizeof(BCM2838PcieHostState),
+ .instance_init = bcm2838_pcie_host_initfn,
+ .class_init = bcm2838_pcie_host_class_init,
+};
+
/*
* RC root part (D0:F0)
*/
@@ -69,6 +280,7 @@ static const TypeInfo bcm2838_pcie_root_info = {
static void bcm2838_pcie_register(void)
{
type_register_static(&bcm2838_pcie_root_info);
+ type_register_static(&bcm2838_pcie_host_info);
}
type_init(bcm2838_pcie_register)
diff --git a/include/hw/arm/bcm2838_pcie.h b/include/hw/arm/bcm2838_pcie.h
index 39828f817f..58c3a0efe7 100644
--- a/include/hw/arm/bcm2838_pcie.h
+++ b/include/hw/arm/bcm2838_pcie.h
@@ -16,6 +16,9 @@
#include "hw/pci/pcie_port.h"
#include "qom/object.h"
+#define TYPE_BCM2838_PCIE_HOST "bcm2838-pcie-host"
+OBJECT_DECLARE_SIMPLE_TYPE(BCM2838PcieHostState, BCM2838_PCIE_HOST)
+
#define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
BCM2838_PCIE_ROOT)
@@ -50,4 +53,23 @@ struct BCM2838PcieRootClass {
};
+struct BCM2838PcieHostState {
+ /*< private >*/
+ PCIExpressHost parent_obj;
+
+ /*< public >*/
+ BCM2838PcieRootState root_port;
+
+ MemoryRegion cfg_regs;
+ MemoryRegion io_ioport;
+ MemoryRegion io_mmio;
+ MemoryRegion io_ioport_window;
+ MemoryRegion io_mmio_window;
+
+ qemu_irq irq[BCM2838_PCIE_NUM_IRQS];
+ int irq_num[BCM2838_PCIE_NUM_IRQS];
+};
+
+int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi);
+
#endif /* BCM2838_PCIE_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 15/45] Add BCM2838 PCIE host
2023-12-08 2:31 ` [PATCH v4 15/45] Add BCM2838 PCIE host Sergey Kambalin
@ 2024-01-15 14:08 ` Peter Maydell
2024-01-29 3:18 ` Sergei Kambalin
1 sibling, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:08 UTC (permalink / raw)
To: Sergey Kambalin
Cc: qemu-arm, qemu-devel, Sergey Kambalin, Michael S. Tsirkin,
Marcel Apfelbaum
(I've cc'd our PCI subsystem maintainers, because I'm not really
confident in reviewing a PCI controller model. Marcel, Michael:
this is one of 3 patches adding the pcie controller for the raspberry
pi 4 SoC. You can find the relevant patches also here:
https://patchew.org/QEMU/20231208023145.1385775-1-sergey.kambalin@auriga.com
/20231208023145.1385775-15-sergey.kambalin@auriga.com/
(link is to patch 14, the PCIE patches are 14 and 15, plus 16
is the one that wires up the controller into the SoC).
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_pcie.c | 216 +++++++++++++++++++++++++++++++++-
> include/hw/arm/bcm2838_pcie.h | 22 ++++
> 2 files changed, 236 insertions(+), 2 deletions(-)
>
> diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
> index 3b4373c6a6..75146d6c2e 100644
> --- a/hw/arm/bcm2838_pcie.c
> +++ b/hw/arm/bcm2838_pcie.c
> @@ -12,11 +12,222 @@
> #include "hw/irq.h"
> #include "hw/pci-host/gpex.h"
> #include "hw/qdev-properties.h"
> -#include "migration/vmstate.h"
> -#include "qemu/module.h"
> #include "hw/arm/bcm2838_pcie.h"
> #include "trace.h"
>
> +/*
> + * RC host part
> + */
> +
> +static uint64_t bcm2838_pcie_host_read(void *opaque, hwaddr offset,
> + unsigned size) {
> + hwaddr mmcfg_addr;
> + uint64_t value = ~0;
> + BCM2838PcieHostState *s = opaque;
> + PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
> + PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
> + uint8_t *root_regs = s->root_port.regs;
> + uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
> + - PCIE_CONFIG_SPACE_SIZE);
> +
> + if (offset < PCIE_CONFIG_SPACE_SIZE) {
> + value = pci_host_config_read_common(root_pci_dev, offset,
> + PCIE_CONFIG_SPACE_SIZE, size);
> + } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
> + <= sizeof(s->root_port.regs)) {
> + switch (offset) {
> + case BCM2838_PCIE_EXT_CFG_DATA
> + ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
> + mmcfg_addr = *cfg_idx
> + | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
> + value = pcie_hb->mmio.ops->read(opaque, mmcfg_addr, size);
> + break;
> + default:
> + memcpy(&value, root_regs + offset - PCIE_CONFIG_SPACE_SIZE, size);
> + }
> + } else {
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
> + __func__, size, offset);
> + }
> +
> + trace_bcm2838_pcie_host_read(size, offset, value);
> + return value;
> +}
> +
> +static void bcm2838_pcie_host_write(void *opaque, hwaddr offset,
> + uint64_t value, unsigned size) {
> + hwaddr mmcfg_addr;
> + BCM2838PcieHostState *s = opaque;
> + PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
> + PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
> + uint8_t *root_regs = s->root_port.regs;
> + uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
> + - PCIE_CONFIG_SPACE_SIZE);
> +
> + trace_bcm2838_pcie_host_write(size, offset, value);
> +
> + if (offset < PCIE_CONFIG_SPACE_SIZE) {
> + pci_host_config_write_common(root_pci_dev, offset,
> + PCIE_CONFIG_SPACE_SIZE, value, size);
> + } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
> + <= sizeof(s->root_port.regs)) {
> + switch (offset) {
> + case BCM2838_PCIE_EXT_CFG_DATA
> + ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
> + mmcfg_addr = *cfg_idx
> + | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
> + pcie_hb->mmio.ops->write(opaque, mmcfg_addr, value, size);
> + break;
> + default:
> + memcpy(root_regs + offset - PCIE_CONFIG_SPACE_SIZE, &value, size);
> + }
> + } else {
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
> + __func__, size, offset);
> + }
> +}
> +
> +static const MemoryRegionOps bcm2838_pcie_host_ops = {
> + .read = bcm2838_pcie_host_read,
> + .write = bcm2838_pcie_host_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> + .impl = {.max_access_size = sizeof(uint64_t)},
> +};
I'm not super familiar with how QEMU models PCI controllers,
but I'm not sure this handling of the root port config registers
is right. On other controllers it looks like the
root config reads and writes are handled by setting the
PCIDeviceClass::config_read and PCIDevice::config_write
methods.
> +
> +int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi)
> +{
> + if (index >= BCM2838_PCIE_NUM_IRQS) {
> + return -EINVAL;
> + }
> +
> + s->irq_num[index] = spi;
> + return 0;
> +}
> +
> +static void bcm2838_pcie_host_set_irq(void *opaque, int irq_num, int level)
> +{
> + BCM2838PcieHostState *s = opaque;
> +
> + qemu_set_irq(s->irq[irq_num], level);
> +}
> +
> +static PCIINTxRoute bcm2838_pcie_host_route_intx_pin_to_irq(void *opaque,
> + int pin)
> +{
> + PCIINTxRoute route;
> + BCM2838PcieHostState *s = opaque;
> +
> + route.irq = s->irq_num[pin];
> + route.mode = route.irq < 0 ? PCI_INTX_DISABLED : PCI_INTX_ENABLED;
> +
> + return route;
> +}
> +
> +static int bcm2838_pcie_host_map_irq(PCIDevice *pci_dev, int pin)
> +{
> + return pin;
> +}
> +
> +static void bcm2838_pcie_host_realize(DeviceState *dev, Error **errp)
> +{
> + PCIHostState *pci = PCI_HOST_BRIDGE(dev);
> + BCM2838PcieHostState *s = BCM2838_PCIE_HOST(dev);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> +
> + int i;
> +
> + memory_region_init_io(&s->cfg_regs, OBJECT(s), &bcm2838_pcie_host_ops, s,
> + "bcm2838_pcie_cfg_regs", BCM2838_PCIE_REGS_SIZE);
> + sysbus_init_mmio(sbd, &s->cfg_regs);
> +
> + /*
> + * The MemoryRegions io_mmio and io_ioport that we pass to
> + * pci_register_root_bus() are not the same as the MemoryRegions
> + * io_mmio_window and io_ioport_window that we expose as SysBus MRs.
> + * The difference is in the behavior of accesses to addresses where no PCI
> + * device has been mapped.
> + *
> + * io_mmio and io_ioport are the underlying PCI view of the PCI address
> + * space, and when a PCI device does a bus master access to a bad address
> + * this is reported back to it as a transaction failure.
> + *
> + * io_mmio_window and io_ioport_window implement "unmapped addresses read as
> + * -1 and ignore writes"; this is a traditional x86 PC behavior, which is
> + * not mandated properly by the PCI spec but expected by the majority of
> + * PCI-using guest software, including Linux.
Isn't the important thing here not what guest software thinks, but
what the actual hardware in this bcm2838 SoC implements ?
> + *
> + * We implement it in the PCIe host controller, by providing the *_window
> + * MRs, which are containers with io ops that implement the 'background'
> + * behavior and which hold the real PCI MRs as sub-regions.
> + */
> + memory_region_init(&s->io_mmio, OBJECT(s), "bcm2838_pcie_mmio", UINT64_MAX);
> + memory_region_init(&s->io_ioport, OBJECT(s), "bcm2838_pcie_ioport",
> + 64 * 1024);
> +
> + memory_region_init_io(&s->io_mmio_window, OBJECT(s),
> + &unassigned_io_ops, OBJECT(s),
> + "bcm2838_pcie_mmio_window", UINT64_MAX);
> + memory_region_init_io(&s->io_ioport_window, OBJECT(s),
> + &unassigned_io_ops, OBJECT(s),
> + "bcm2838_pcie_ioport_window", 64 * 1024);
> +
> + memory_region_add_subregion(&s->io_mmio_window, 0, &s->io_mmio);
> + memory_region_add_subregion(&s->io_ioport_window, 0, &s->io_ioport);
> + sysbus_init_mmio(sbd, &s->io_mmio_window);
> + sysbus_init_mmio(sbd, &s->io_ioport_window);
> +
> + for (i = 0; i < BCM2838_PCIE_NUM_IRQS; i++) {
> + sysbus_init_irq(sbd, &s->irq[i]);
> + s->irq_num[i] = -1;
> + }
> +
> + pci->bus = pci_register_root_bus(dev, "pcie.0", bcm2838_pcie_host_set_irq,
> + bcm2838_pcie_host_map_irq, s, &s->io_mmio,
> + &s->io_ioport, 0, BCM2838_PCIE_NUM_IRQS,
> + TYPE_PCIE_BUS);
> + pci_bus_set_route_irq_fn(pci->bus, bcm2838_pcie_host_route_intx_pin_to_irq);
> + qdev_realize(DEVICE(&s->root_port), BUS(pci->bus), &error_fatal);
> +}
> +
> +static const char *bcm2838_pcie_host_root_bus_path(PCIHostState *host_bridge,
> + PCIBus *rootbus)
> +{
> + return "0000:00";
> +}
> +
> +static void bcm2838_pcie_host_class_init(ObjectClass *class, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(class);
> + PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
> +
> + hc->root_bus_path = bcm2838_pcie_host_root_bus_path;
> + dc->realize = bcm2838_pcie_host_realize;
> + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> + dc->fw_name = "pci";
> +}
> +
> +static void bcm2838_pcie_host_initfn(Object *obj)
> +{
> + BCM2838PcieHostState *s = BCM2838_PCIE_HOST(obj);
> + BCM2838PcieRootState *root = &s->root_port;
> +
> + object_initialize_child(obj, "root_port", root, TYPE_BCM2838_PCIE_ROOT);
> + qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
> + qdev_prop_set_bit(DEVICE(root), "multifunction", false);
> +}
> +
> +static const TypeInfo bcm2838_pcie_host_info = {
> + .name = TYPE_BCM2838_PCIE_HOST,
> + .parent = TYPE_PCIE_HOST_BRIDGE,
> + .instance_size = sizeof(BCM2838PcieHostState),
> + .instance_init = bcm2838_pcie_host_initfn,
> + .class_init = bcm2838_pcie_host_class_init,
> +};
> +
> /*
> * RC root part (D0:F0)
> */
> @@ -69,6 +280,7 @@ static const TypeInfo bcm2838_pcie_root_info = {
> static void bcm2838_pcie_register(void)
> {
> type_register_static(&bcm2838_pcie_root_info);
> + type_register_static(&bcm2838_pcie_host_info);
> }
>
> type_init(bcm2838_pcie_register)
> diff --git a/include/hw/arm/bcm2838_pcie.h b/include/hw/arm/bcm2838_pcie.h
> index 39828f817f..58c3a0efe7 100644
> --- a/include/hw/arm/bcm2838_pcie.h
> +++ b/include/hw/arm/bcm2838_pcie.h
> @@ -16,6 +16,9 @@
> #include "hw/pci/pcie_port.h"
> #include "qom/object.h"
>
> +#define TYPE_BCM2838_PCIE_HOST "bcm2838-pcie-host"
> +OBJECT_DECLARE_SIMPLE_TYPE(BCM2838PcieHostState, BCM2838_PCIE_HOST)
> +
> #define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
> OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
> BCM2838_PCIE_ROOT)
> @@ -50,4 +53,23 @@ struct BCM2838PcieRootClass {
> };
>
>
> +struct BCM2838PcieHostState {
> + /*< private >*/
> + PCIExpressHost parent_obj;
> +
> + /*< public >*/
> + BCM2838PcieRootState root_port;
> +
> + MemoryRegion cfg_regs;
> + MemoryRegion io_ioport;
> + MemoryRegion io_mmio;
> + MemoryRegion io_ioport_window;
> + MemoryRegion io_mmio_window;
> +
> + qemu_irq irq[BCM2838_PCIE_NUM_IRQS];
> + int irq_num[BCM2838_PCIE_NUM_IRQS];
> +};
> +
> +int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi);
> +
> #endif /* BCM2838_PCIE_H */
> --
> 2.34.1
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH v4 15/45] Add BCM2838 PCIE host
2023-12-08 2:31 ` [PATCH v4 15/45] Add BCM2838 PCIE host Sergey Kambalin
2024-01-15 14:08 ` Peter Maydell
@ 2024-01-29 3:18 ` Sergei Kambalin
1 sibling, 0 replies; 82+ messages in thread
From: Sergei Kambalin @ 2024-01-29 3:18 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
[-- Attachment #1: Type: text/plain, Size: 11912 bytes --]
I'm not super familiar with how QEMU models PCI controllers, but I'm not
sure this handling of the root port config registers is right. On other
controllers it looks like the root config reads and writes are handled
by setting the PCIDeviceClass::config_read and PCIDevice::config_write
methods.
It's not only for config space access but also to configuration area beyond PCIE config space.
I'm going to split into two access methods:
1) bcm2838_pcie_config_{write,read}() for access to addresses within the config space. Will be assigned to the dev->config_write.
2) bcm2838_pcie_mmio_{write,read}() for access to addresses beyond the config space. Will be implemented as 'normal' MemoryRegionOps structure.
Isn't the important thing here not what guest software thinks, but what
the actual hardware in this bcm2838 SoC implements ?
The thing is that the code is not fully abides the PCIe spec. It's been written mostly basing on kernel code and boot logs analysis.
That's why I think it worth to add a detailed comment why it was written that way.
On 12/7/23 20:31, Sergey Kambalin wrote:
> Signed-off-by: Sergey Kambalin<sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_pcie.c | 216 +++++++++++++++++++++++++++++++++-
> include/hw/arm/bcm2838_pcie.h | 22 ++++
> 2 files changed, 236 insertions(+), 2 deletions(-)
>
> diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
> index 3b4373c6a6..75146d6c2e 100644
> --- a/hw/arm/bcm2838_pcie.c
> +++ b/hw/arm/bcm2838_pcie.c
> @@ -12,11 +12,222 @@
> #include "hw/irq.h"
> #include "hw/pci-host/gpex.h"
> #include "hw/qdev-properties.h"
> -#include "migration/vmstate.h"
> -#include "qemu/module.h"
> #include "hw/arm/bcm2838_pcie.h"
> #include "trace.h"
>
> +/*
> + * RC host part
> + */
> +
> +static uint64_t bcm2838_pcie_host_read(void *opaque, hwaddr offset,
> + unsigned size) {
> + hwaddr mmcfg_addr;
> + uint64_t value = ~0;
> + BCM2838PcieHostState *s = opaque;
> + PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
> + PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
> + uint8_t *root_regs = s->root_port.regs;
> + uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
> + - PCIE_CONFIG_SPACE_SIZE);
> +
> + if (offset < PCIE_CONFIG_SPACE_SIZE) {
> + value = pci_host_config_read_common(root_pci_dev, offset,
> + PCIE_CONFIG_SPACE_SIZE, size);
> + } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
> + <= sizeof(s->root_port.regs)) {
> + switch (offset) {
> + case BCM2838_PCIE_EXT_CFG_DATA
> + ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
> + mmcfg_addr = *cfg_idx
> + | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
> + value = pcie_hb->mmio.ops->read(opaque, mmcfg_addr, size);
> + break;
> + default:
> + memcpy(&value, root_regs + offset - PCIE_CONFIG_SPACE_SIZE, size);
> + }
> + } else {
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
> + __func__, size, offset);
> + }
> +
> + trace_bcm2838_pcie_host_read(size, offset, value);
> + return value;
> +}
> +
> +static void bcm2838_pcie_host_write(void *opaque, hwaddr offset,
> + uint64_t value, unsigned size) {
> + hwaddr mmcfg_addr;
> + BCM2838PcieHostState *s = opaque;
> + PCIExpressHost *pcie_hb = PCIE_HOST_BRIDGE(s);
> + PCIDevice *root_pci_dev = PCI_DEVICE(&s->root_port);
> + uint8_t *root_regs = s->root_port.regs;
> + uint32_t *cfg_idx = (uint32_t *)(root_regs + BCM2838_PCIE_EXT_CFG_INDEX
> + - PCIE_CONFIG_SPACE_SIZE);
> +
> + trace_bcm2838_pcie_host_write(size, offset, value);
> +
> + if (offset < PCIE_CONFIG_SPACE_SIZE) {
> + pci_host_config_write_common(root_pci_dev, offset,
> + PCIE_CONFIG_SPACE_SIZE, value, size);
> + } else if (offset - PCIE_CONFIG_SPACE_SIZE + size
> + <= sizeof(s->root_port.regs)) {
> + switch (offset) {
> + case BCM2838_PCIE_EXT_CFG_DATA
> + ... BCM2838_PCIE_EXT_CFG_DATA + PCIE_CONFIG_SPACE_SIZE - 1:
> + mmcfg_addr = *cfg_idx
> + | PCIE_MMCFG_CONFOFFSET(offset - BCM2838_PCIE_EXT_CFG_DATA);
> + pcie_hb->mmio.ops->write(opaque, mmcfg_addr, value, size);
> + break;
> + default:
> + memcpy(root_regs + offset - PCIE_CONFIG_SPACE_SIZE, &value, size);
> + }
> + } else {
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
> + __func__, size, offset);
> + }
> +}
> +
> +static const MemoryRegionOps bcm2838_pcie_host_ops = {
> + .read = bcm2838_pcie_host_read,
> + .write = bcm2838_pcie_host_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> + .impl = {.max_access_size = sizeof(uint64_t)},
> +};
> +
> +int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi)
> +{
> + if (index >= BCM2838_PCIE_NUM_IRQS) {
> + return -EINVAL;
> + }
> +
> + s->irq_num[index] = spi;
> + return 0;
> +}
> +
> +static void bcm2838_pcie_host_set_irq(void *opaque, int irq_num, int level)
> +{
> + BCM2838PcieHostState *s = opaque;
> +
> + qemu_set_irq(s->irq[irq_num], level);
> +}
> +
> +static PCIINTxRoute bcm2838_pcie_host_route_intx_pin_to_irq(void *opaque,
> + int pin)
> +{
> + PCIINTxRoute route;
> + BCM2838PcieHostState *s = opaque;
> +
> + route.irq = s->irq_num[pin];
> + route.mode = route.irq < 0 ? PCI_INTX_DISABLED : PCI_INTX_ENABLED;
> +
> + return route;
> +}
> +
> +static int bcm2838_pcie_host_map_irq(PCIDevice *pci_dev, int pin)
> +{
> + return pin;
> +}
> +
> +static void bcm2838_pcie_host_realize(DeviceState *dev, Error **errp)
> +{
> + PCIHostState *pci = PCI_HOST_BRIDGE(dev);
> + BCM2838PcieHostState *s = BCM2838_PCIE_HOST(dev);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> +
> + int i;
> +
> + memory_region_init_io(&s->cfg_regs, OBJECT(s), &bcm2838_pcie_host_ops, s,
> + "bcm2838_pcie_cfg_regs", BCM2838_PCIE_REGS_SIZE);
> + sysbus_init_mmio(sbd, &s->cfg_regs);
> +
> + /*
> + * The MemoryRegions io_mmio and io_ioport that we pass to
> + * pci_register_root_bus() are not the same as the MemoryRegions
> + * io_mmio_window and io_ioport_window that we expose as SysBus MRs.
> + * The difference is in the behavior of accesses to addresses where no PCI
> + * device has been mapped.
> + *
> + * io_mmio and io_ioport are the underlying PCI view of the PCI address
> + * space, and when a PCI device does a bus master access to a bad address
> + * this is reported back to it as a transaction failure.
> + *
> + * io_mmio_window and io_ioport_window implement "unmapped addresses read as
> + * -1 and ignore writes"; this is a traditional x86 PC behavior, which is
> + * not mandated properly by the PCI spec but expected by the majority of
> + * PCI-using guest software, including Linux.
> + *
> + * We implement it in the PCIe host controller, by providing the *_window
> + * MRs, which are containers with io ops that implement the 'background'
> + * behavior and which hold the real PCI MRs as sub-regions.
> + */
> + memory_region_init(&s->io_mmio, OBJECT(s), "bcm2838_pcie_mmio", UINT64_MAX);
> + memory_region_init(&s->io_ioport, OBJECT(s), "bcm2838_pcie_ioport",
> + 64 * 1024);
> +
> + memory_region_init_io(&s->io_mmio_window, OBJECT(s),
> + &unassigned_io_ops, OBJECT(s),
> + "bcm2838_pcie_mmio_window", UINT64_MAX);
> + memory_region_init_io(&s->io_ioport_window, OBJECT(s),
> + &unassigned_io_ops, OBJECT(s),
> + "bcm2838_pcie_ioport_window", 64 * 1024);
> +
> + memory_region_add_subregion(&s->io_mmio_window, 0, &s->io_mmio);
> + memory_region_add_subregion(&s->io_ioport_window, 0, &s->io_ioport);
> + sysbus_init_mmio(sbd, &s->io_mmio_window);
> + sysbus_init_mmio(sbd, &s->io_ioport_window);
> +
> + for (i = 0; i < BCM2838_PCIE_NUM_IRQS; i++) {
> + sysbus_init_irq(sbd, &s->irq[i]);
> + s->irq_num[i] = -1;
> + }
> +
> + pci->bus = pci_register_root_bus(dev, "pcie.0", bcm2838_pcie_host_set_irq,
> + bcm2838_pcie_host_map_irq, s, &s->io_mmio,
> + &s->io_ioport, 0, BCM2838_PCIE_NUM_IRQS,
> + TYPE_PCIE_BUS);
> + pci_bus_set_route_irq_fn(pci->bus, bcm2838_pcie_host_route_intx_pin_to_irq);
> + qdev_realize(DEVICE(&s->root_port), BUS(pci->bus), &error_fatal);
> +}
> +
> +static const char *bcm2838_pcie_host_root_bus_path(PCIHostState *host_bridge,
> + PCIBus *rootbus)
> +{
> + return "0000:00";
> +}
> +
> +static void bcm2838_pcie_host_class_init(ObjectClass *class, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(class);
> + PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
> +
> + hc->root_bus_path = bcm2838_pcie_host_root_bus_path;
> + dc->realize = bcm2838_pcie_host_realize;
> + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> + dc->fw_name = "pci";
> +}
> +
> +static void bcm2838_pcie_host_initfn(Object *obj)
> +{
> + BCM2838PcieHostState *s = BCM2838_PCIE_HOST(obj);
> + BCM2838PcieRootState *root = &s->root_port;
> +
> + object_initialize_child(obj, "root_port", root, TYPE_BCM2838_PCIE_ROOT);
> + qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
> + qdev_prop_set_bit(DEVICE(root), "multifunction", false);
> +}
> +
> +static const TypeInfo bcm2838_pcie_host_info = {
> + .name = TYPE_BCM2838_PCIE_HOST,
> + .parent = TYPE_PCIE_HOST_BRIDGE,
> + .instance_size = sizeof(BCM2838PcieHostState),
> + .instance_init = bcm2838_pcie_host_initfn,
> + .class_init = bcm2838_pcie_host_class_init,
> +};
> +
> /*
> * RC root part (D0:F0)
> */
> @@ -69,6 +280,7 @@ static const TypeInfo bcm2838_pcie_root_info = {
> static void bcm2838_pcie_register(void)
> {
> type_register_static(&bcm2838_pcie_root_info);
> + type_register_static(&bcm2838_pcie_host_info);
> }
>
> type_init(bcm2838_pcie_register)
> diff --git a/include/hw/arm/bcm2838_pcie.h b/include/hw/arm/bcm2838_pcie.h
> index 39828f817f..58c3a0efe7 100644
> --- a/include/hw/arm/bcm2838_pcie.h
> +++ b/include/hw/arm/bcm2838_pcie.h
> @@ -16,6 +16,9 @@
> #include "hw/pci/pcie_port.h"
> #include "qom/object.h"
>
> +#define TYPE_BCM2838_PCIE_HOST "bcm2838-pcie-host"
> +OBJECT_DECLARE_SIMPLE_TYPE(BCM2838PcieHostState, BCM2838_PCIE_HOST)
> +
> #define TYPE_BCM2838_PCIE_ROOT "bcm2838-pcie-root"
> OBJECT_DECLARE_TYPE(BCM2838PcieRootState, BCM2838PcieRootClass,
> BCM2838_PCIE_ROOT)
> @@ -50,4 +53,23 @@ struct BCM2838PcieRootClass {
> };
>
>
> +struct BCM2838PcieHostState {
> + /*< private >*/
> + PCIExpressHost parent_obj;
> +
> + /*< public >*/
> + BCM2838PcieRootState root_port;
> +
> + MemoryRegion cfg_regs;
> + MemoryRegion io_ioport;
> + MemoryRegion io_mmio;
> + MemoryRegion io_ioport_window;
> + MemoryRegion io_mmio_window;
> +
> + qemu_irq irq[BCM2838_PCIE_NUM_IRQS];
> + int irq_num[BCM2838_PCIE_NUM_IRQS];
> +};
> +
> +int bcm2838_pcie_host_set_irq_num(BCM2838PcieHostState *s, int index, int spi);
> +
> #endif /* BCM2838_PCIE_H */
[-- Attachment #2: Type: text/html, Size: 12095 bytes --]
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 16/45] Enable BCM2838 PCIE
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (14 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 15/45] Add BCM2838 PCIE host Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:10 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 17/45] Add RNG200 skeleton Sergey Kambalin
` (30 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_pcie.c | 3 +++
hw/arm/bcm2838_peripherals.c | 26 ++++++++++++++++++++++++++
hw/arm/meson.build | 7 ++++---
hw/arm/raspi4b.c | 1 -
include/hw/arm/bcm2838_peripherals.h | 3 +++
5 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
index 75146d6c2e..8e046d0ac7 100644
--- a/hw/arm/bcm2838_pcie.c
+++ b/hw/arm/bcm2838_pcie.c
@@ -239,6 +239,9 @@ static void bcm2838_pcie_root_reg_reset(PCIDevice *dev)
}
static void bcm2838_pcie_root_realize(PCIDevice *dev, Error **errp) {
+ BCM2838PcieRootClass *brpc = BCM2838_PCIE_ROOT_GET_CLASS(dev);
+
+ brpc->parent_realize(dev, errp);
bcm2838_pcie_root_reg_reset(dev);
}
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index d3b42cf25b..ee06214715 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -12,6 +12,11 @@
#include "hw/arm/raspi_platform.h"
#include "hw/arm/bcm2838_peripherals.h"
+#define PCIE_RC_OFFSET 0x1500000
+#define PCIE_MMIO_OFFSET 0xc0000000
+#define PCIE_MMIO_ARM_OFFSET 0x600000000
+#define PCIE_MMIO_SIZE 0x40000000
+
/* Lower peripheral base address on the VC (GPU) system bus */
#define BCM2838_VC_PERI_LOW_BASE 0x7c000000
@@ -29,6 +34,10 @@ static void bcm2838_peripherals_init(Object *obj)
bc->peri_low_size);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
+ /* PCIe Host Bridge */
+ object_initialize_child(obj, "pcie-host", &s->pcie_host,
+ TYPE_BCM2838_PCIE_HOST);
+
/* Extended Mass Media Controller 2 */
object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
@@ -61,6 +70,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
MemoryRegion *mphi_mr;
BCM2838PeripheralState *s = BCM2838_PERIPHERALS(dev);
BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
+ MemoryRegion *regs_mr;
+ MemoryRegion *mmio_mr;
+
int n;
bcm_soc_peripherals_common_realize(dev, errp);
@@ -172,6 +184,20 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
BCM2838_MPHI_SIZE);
memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
&s->mphi_mr_alias);
+ /* PCIe Root Complex */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_host), errp)) {
+ return;
+ }
+ /* RC registers region */
+ regs_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->pcie_host), 0);
+ memory_region_add_subregion(&s->peri_low_mr, PCIE_RC_OFFSET, regs_mr);
+ /* MMIO region */
+ mmio_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->pcie_host), 1);
+ memory_region_init_alias(&s->pcie_mmio_alias, OBJECT(&s->pcie_host),
+ "pcie-mmio", mmio_mr, PCIE_MMIO_OFFSET,
+ PCIE_MMIO_SIZE);
+ memory_region_add_subregion(get_system_memory(), PCIE_MMIO_ARM_OFFSET,
+ &s->pcie_mmio_alias);
/* GPIO */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index b26ed13c6f..69d199b73e 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -41,7 +41,6 @@ arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bana
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
arm_ss.add(when: ['CONFIG_RASPI', 'TARGET_AARCH64'], if_true: files(
'bcm2838.c',
- 'bcm2838_pcie.c',
'raspi4b.c'))
arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
@@ -72,8 +71,10 @@ arm_ss.add(when: 'CONFIG_XEN', if_true: files('xen_arm.c'))
system_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c'))
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
-system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c'))
-system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2838_peripherals.c'))
+system_ss.add(when: 'CONFIG_RASPI', if_true: files(
+ 'bcm2835_peripherals.c',
+ 'bcm2838_peripherals.c',
+ 'bcm2838_pcie.c'))
system_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c'))
hw_arch += {'arm': arm_ss}
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index 10376b62dc..2e8474e1c5 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
/* Temporarily disable following devices until they are implemented*/
const char *to_be_removed_from_dt_as_wa[] = {
- "brcm,bcm2711-pcie",
"brcm,bcm2711-rng200",
"brcm,bcm2711-thermal",
"brcm,bcm2711-genet-v5",
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index af085934c9..2af96df1c6 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -10,6 +10,7 @@
#define BCM2838_PERIPHERALS_H
#include "hw/arm/bcm2835_peripherals.h"
+#include "hw/arm/bcm2838_pcie.h"
#include "hw/sd/sdhci.h"
#include "hw/gpio/bcm2838_gpio.h"
@@ -62,8 +63,10 @@ struct BCM2838PeripheralState {
MemoryRegion peri_low_mr;
MemoryRegion peri_low_mr_alias;
MemoryRegion mphi_mr_alias;
+ MemoryRegion pcie_mmio_alias;
SDHCIState emmc2;
+ BCM2838PcieHostState pcie_host;
BCM2838GpioState gpio;
OrIRQState mmc_irq_orgate;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 16/45] Enable BCM2838 PCIE
2023-12-08 2:31 ` [PATCH v4 16/45] Enable BCM2838 PCIE Sergey Kambalin
@ 2024-01-15 14:10 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:10 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_pcie.c | 3 +++
> hw/arm/bcm2838_peripherals.c | 26 ++++++++++++++++++++++++++
> hw/arm/meson.build | 7 ++++---
> hw/arm/raspi4b.c | 1 -
> include/hw/arm/bcm2838_peripherals.h | 3 +++
> 5 files changed, 36 insertions(+), 4 deletions(-)
>
> diff --git a/hw/arm/bcm2838_pcie.c b/hw/arm/bcm2838_pcie.c
> index 75146d6c2e..8e046d0ac7 100644
> --- a/hw/arm/bcm2838_pcie.c
> +++ b/hw/arm/bcm2838_pcie.c
> @@ -239,6 +239,9 @@ static void bcm2838_pcie_root_reg_reset(PCIDevice *dev)
> }
>
> static void bcm2838_pcie_root_realize(PCIDevice *dev, Error **errp) {
> + BCM2838PcieRootClass *brpc = BCM2838_PCIE_ROOT_GET_CLASS(dev);
> +
> + brpc->parent_realize(dev, errp);
> bcm2838_pcie_root_reg_reset(dev);
> }
>
I guess this change should have been in the previous patch ?
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index d3b42cf25b..ee06214715 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -12,6 +12,11 @@
> #include "hw/arm/raspi_platform.h"
> #include "hw/arm/bcm2838_peripherals.h"
>
> +#define PCIE_RC_OFFSET 0x1500000
> +#define PCIE_MMIO_OFFSET 0xc0000000
> +#define PCIE_MMIO_ARM_OFFSET 0x600000000
> +#define PCIE_MMIO_SIZE 0x40000000
> +
> /* Lower peripheral base address on the VC (GPU) system bus */
> #define BCM2838_VC_PERI_LOW_BASE 0x7c000000
>
> @@ -29,6 +34,10 @@ static void bcm2838_peripherals_init(Object *obj)
> bc->peri_low_size);
> sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
>
> + /* PCIe Host Bridge */
> + object_initialize_child(obj, "pcie-host", &s->pcie_host,
> + TYPE_BCM2838_PCIE_HOST);
> +
> /* Extended Mass Media Controller 2 */
> object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
>
> @@ -61,6 +70,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> MemoryRegion *mphi_mr;
> BCM2838PeripheralState *s = BCM2838_PERIPHERALS(dev);
> BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
> + MemoryRegion *regs_mr;
> + MemoryRegion *mmio_mr;
> +
> int n;
>
> bcm_soc_peripherals_common_realize(dev, errp);
> @@ -172,6 +184,20 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> BCM2838_MPHI_SIZE);
> memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
> &s->mphi_mr_alias);
> + /* PCIe Root Complex */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_host), errp)) {
> + return;
> + }
> + /* RC registers region */
> + regs_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->pcie_host), 0);
> + memory_region_add_subregion(&s->peri_low_mr, PCIE_RC_OFFSET, regs_mr);
> + /* MMIO region */
> + mmio_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->pcie_host), 1);
> + memory_region_init_alias(&s->pcie_mmio_alias, OBJECT(&s->pcie_host),
> + "pcie-mmio", mmio_mr, PCIE_MMIO_OFFSET,
> + PCIE_MMIO_SIZE);
> + memory_region_add_subregion(get_system_memory(), PCIE_MMIO_ARM_OFFSET,
> + &s->pcie_mmio_alias);
Why do we need an alias region here rather than just mapping
the region from the pcie host device directly ?
>
> /* GPIO */
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 17/45] Add RNG200 skeleton
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (15 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 16/45] Enable BCM2838 PCIE Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:19 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 18/45] Add RNG200 RNG and RBG Sergey Kambalin
` (29 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2838_rng200.c | 152 +++++++++++++++++++++++++++++++
hw/misc/meson.build | 1 +
hw/misc/trace-events | 9 ++
include/hw/misc/bcm2838_rng200.h | 51 +++++++++++
4 files changed, 213 insertions(+)
create mode 100644 hw/misc/bcm2838_rng200.c
create mode 100644 include/hw/misc/bcm2838_rng200.h
diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
new file mode 100644
index 0000000000..8f64e6a20f
--- /dev/null
+++ b/hw/misc/bcm2838_rng200.c
@@ -0,0 +1,152 @@
+/*
+ * BCM2838 Random Number Generator emulation
+ *
+ * Copyright (C) 2022 Sergey Pushkarev <sergey.pushkarev@auriga.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/qdev-properties.h"
+#include "hw/misc/bcm2838_rng200.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+
+static const VMStateDescription vmstate_bcm2838_rng200_regs = {
+ .name = "bcm2838_rng200_regs",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(ctrl, BCM2838_rng_regs_t),
+ VMSTATE_UINT32(int_status, BCM2838_rng_regs_t),
+ VMSTATE_UINT32(fifo_count, BCM2838_rng_regs_t),
+ VMSTATE_UINT32(fifo_count_threshold, BCM2838_rng_regs_t),
+ VMSTATE_UINT32(total_bit_count_threshold, BCM2838_rng_regs_t),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_bcm2838_rng200 = {
+ .name = "bcm2838_rng200",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(rbg_period, BCM2838Rng200State),
+ VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
+ VMSTATE_BOOL(use_timer, BCM2838Rng200State),
+
+ VMSTATE_STRUCT(regs, BCM2838Rng200State, 0, vmstate_bcm2838_rng200_regs,
+ BCM2838_rng_regs_t),
+
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void bcm2838_rng200_rng_reset(BCM2838Rng200State *state)
+{
+ state->regs.ctrl = 0;
+
+ trace_bcm2838_rng200_rng_soft_reset();
+}
+
+static uint64_t bcm2838_rng200_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ uint32_t res = 0;
+
+ /* will be implemented in upcoming commits */
+ return res;
+}
+
+static void bcm2838_rng200_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ /* will be implemented in upcoming commits */
+}
+
+static const MemoryRegionOps bcm2838_rng200_ops = {
+ .read = bcm2838_rng200_read,
+ .write = bcm2838_rng200_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void bcm2838_rng200_realize(DeviceState *dev, Error **errp)
+{
+ BCM2838Rng200State *s = BCM2838_RNG200(dev);
+
+ if (s->rng == NULL) {
+ Object *default_backend = object_new(TYPE_RNG_BUILTIN);
+
+ object_property_add_child(OBJECT(dev), "default-backend",
+ default_backend);
+ object_unref(default_backend);
+
+ object_property_set_link(OBJECT(dev), "rng", default_backend,
+ errp);
+ }
+
+ sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+}
+
+static void bcm2838_rng200_init(Object *obj)
+{
+ BCM2838Rng200State *s = BCM2838_RNG200(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ s->rbg_period = 250;
+ s->use_timer = true;
+
+ s->rng_fifo_cap = 128;
+
+ s->clock = qdev_init_clock_in(DEVICE(s), "rbg-clock",
+ NULL, s,
+ ClockPreUpdate);
+ if (s->clock == NULL) {
+ error_setg(&error_fatal, "Failed to init RBG clock");
+ return;
+ }
+
+ memory_region_init_io(&s->iomem, obj, &bcm2838_rng200_ops, s,
+ TYPE_BCM2838_RNG200, 0x28);
+ sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void bcm2838_rng200_reset(DeviceState *dev)
+{
+ BCM2838Rng200State *s = BCM2838_RNG200(dev);
+ bcm2838_rng200_rng_reset(s);
+}
+
+static Property bcm2838_rng200_properties[] = {
+ DEFINE_PROP_LINK("rng", BCM2838Rng200State, rng,
+ TYPE_RNG_BACKEND, RngBackend *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void bcm2838_rng200_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = bcm2838_rng200_realize;
+ dc->reset = bcm2838_rng200_reset;
+ dc->vmsd = &vmstate_bcm2838_rng200;
+
+ device_class_set_props(dc, bcm2838_rng200_properties);
+}
+
+static const TypeInfo bcm2838_rng200_info = {
+ .name = TYPE_BCM2838_RNG200,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2838Rng200State),
+ .class_init = bcm2838_rng200_class_init,
+ .instance_init = bcm2838_rng200_init,
+};
+
+static void bcm2838_rng200_register_types(void)
+{
+ type_register_static(&bcm2838_rng200_info);
+}
+
+type_init(bcm2838_rng200_register_types)
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 36c20d5637..b899e6b596 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -91,6 +91,7 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files(
'bcm2835_thermal.c',
'bcm2835_cprman.c',
'bcm2835_powermgt.c',
+ 'bcm2838_rng200.c'
))
system_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
system_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 05ff692441..5e5d3fe61a 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -330,3 +330,12 @@ djmemc_write(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRI
# iosb.c
iosb_read(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRIx64" size=%u"
iosb_write(int reg, uint64_t value, unsigned int size) "reg=0x%x value=0x%"PRIx64" size=%u"
+# bcm2838_rng200.c
+bcm2838_rng200_rng_soft_reset(void) "RNumG soft reset"
+bcm2838_rng200_rbg_soft_reset(void) "RBitG soft reset"
+bcm2838_rng200_enable_rbg(void) "RBitG enabled"
+bcm2838_rng200_disable_rbg(void) "RBitG disabled"
+bcm2838_rng200_update_fifo(uint32_t len, uint32_t fifo_len) "len %u, fifo_len %u"
+bcm2838_rng200_fifo_full(void) "RNumG FIFO full"
+bcm2838_rng200_write(uint64_t addr, uint64_t value, unsigned size) "addr: 0x%"PRIx64" value: 0x%016" PRIx64 " size: %u"
+bcm2838_rng200_read(uint64_t addr, unsigned size, uint64_t value) "addr: 0x%"PRIx64" size: %u value: 0x%016" PRIx64
diff --git a/include/hw/misc/bcm2838_rng200.h b/include/hw/misc/bcm2838_rng200.h
new file mode 100644
index 0000000000..c9c52f84be
--- /dev/null
+++ b/include/hw/misc/bcm2838_rng200.h
@@ -0,0 +1,51 @@
+/*
+ * BCM2838 Random Number Generator emulation
+ *
+ * Copyright (C) 2022 Sergey Pushkarev <sergey.pushkarev@auriga.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef BCM2838_RNG200_H
+#define BCM2838_RNG200_H
+
+#include <stdbool.h>
+#include "qom/object.h"
+#include "qemu/fifo8.h"
+#include "sysemu/rng.h"
+#include "hw/sysbus.h"
+#include "hw/ptimer.h"
+#include "hw/qdev-clock.h"
+#include "hw/irq.h"
+
+#define TYPE_BCM2838_RNG200 "bcm2838-rng200"
+OBJECT_DECLARE_SIMPLE_TYPE(BCM2838Rng200State, BCM2838_RNG200)
+
+typedef struct {
+ uint32_t ctrl;
+ uint32_t int_status;
+ uint32_t fifo_count;
+ uint32_t fifo_count_threshold;
+ uint32_t total_bit_count_threshold;
+} BCM2838_rng_regs_t;
+
+struct BCM2838Rng200State {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ ptimer_state *ptimer;
+ RngBackend *rng;
+ Clock *clock;
+
+ uint32_t rbg_period;
+ uint32_t rng_fifo_cap;
+ bool use_timer;
+
+ Fifo8 fifo;
+ qemu_irq irq;
+
+ BCM2838_rng_regs_t regs;
+};
+
+#endif /* BCM2838_RNG200_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 17/45] Add RNG200 skeleton
2023-12-08 2:31 ` [PATCH v4 17/45] Add RNG200 skeleton Sergey Kambalin
@ 2024-01-15 14:19 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:19 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/misc/bcm2838_rng200.c | 152 +++++++++++++++++++++++++++++++
> hw/misc/meson.build | 1 +
> hw/misc/trace-events | 9 ++
> include/hw/misc/bcm2838_rng200.h | 51 +++++++++++
> 4 files changed, 213 insertions(+)
> create mode 100644 hw/misc/bcm2838_rng200.c
> create mode 100644 include/hw/misc/bcm2838_rng200.h
>
> diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
> new file mode 100644
> index 0000000000..8f64e6a20f
> --- /dev/null
> +++ b/hw/misc/bcm2838_rng200.c
> @@ -0,0 +1,152 @@
> +/*
> + * BCM2838 Random Number Generator emulation
> + *
> + * Copyright (C) 2022 Sergey Pushkarev <sergey.pushkarev@auriga.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/misc/bcm2838_rng200.h"
> +#include "migration/vmstate.h"
> +#include "trace.h"
> +
> +static const VMStateDescription vmstate_bcm2838_rng200_regs = {
> + .name = "bcm2838_rng200_regs",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32(ctrl, BCM2838_rng_regs_t),
> + VMSTATE_UINT32(int_status, BCM2838_rng_regs_t),
> + VMSTATE_UINT32(fifo_count, BCM2838_rng_regs_t),
> + VMSTATE_UINT32(fifo_count_threshold, BCM2838_rng_regs_t),
> + VMSTATE_UINT32(total_bit_count_threshold, BCM2838_rng_regs_t),
> + VMSTATE_END_OF_LIST()
> + }
> +};
We add this vmstate struct in this patch, but then the
following patch deletes it again and opts to instead
define the registers with a simple uint32_t array.
The trace events are also added in this patch but not
used until the next patch.
Since this device isn't a very large one, I'm OK with
you squashing together this patch and the next patch
if you want, so that there's a single patch that implements
the whole device. That makes the patch more than our usual
preference for patch size, but it's probably less effort on
your end than moving code between the two patches so the
second patch isn't deleting parts the first one added.
(You can do that if you prefer, though.)
> +
> +static const VMStateDescription vmstate_bcm2838_rng200 = {
> + .name = "bcm2838_rng200",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32(rbg_period, BCM2838Rng200State),
> + VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
> + VMSTATE_BOOL(use_timer, BCM2838Rng200State),
> +
> + VMSTATE_STRUCT(regs, BCM2838Rng200State, 0, vmstate_bcm2838_rng200_regs,
> + BCM2838_rng_regs_t),
> +
> + VMSTATE_END_OF_LIST()
> + }
> +};
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 18/45] Add RNG200 RNG and RBG
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (16 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 17/45] Add RNG200 skeleton Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:29 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 19/45] Get rid of RNG200 timer Sergey Kambalin
` (28 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2838_rng200.c | 292 +++++++++++++++++++++++++++++--
include/hw/misc/bcm2838_rng200.h | 10 +-
2 files changed, 275 insertions(+), 27 deletions(-)
diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
index 8f64e6a20f..f91ea0754c 100644
--- a/hw/misc/bcm2838_rng200.c
+++ b/hw/misc/bcm2838_rng200.c
@@ -8,25 +8,56 @@
*/
#include "qemu/osdep.h"
+#include "qemu/log.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/misc/bcm2838_rng200.h"
+#include "hw/registerfields.h"
#include "migration/vmstate.h"
#include "trace.h"
-static const VMStateDescription vmstate_bcm2838_rng200_regs = {
- .name = "bcm2838_rng200_regs",
- .version_id = 1,
- .minimum_version_id = 1,
- .fields = (VMStateField[]) {
- VMSTATE_UINT32(ctrl, BCM2838_rng_regs_t),
- VMSTATE_UINT32(int_status, BCM2838_rng_regs_t),
- VMSTATE_UINT32(fifo_count, BCM2838_rng_regs_t),
- VMSTATE_UINT32(fifo_count_threshold, BCM2838_rng_regs_t),
- VMSTATE_UINT32(total_bit_count_threshold, BCM2838_rng_regs_t),
- VMSTATE_END_OF_LIST()
- }
-};
+/* RNG200 registers */
+REG32(RNG_CTRL, 0x00)
+ FIELD(RNG_CTRL, RBG_ENABLE, 0 , 1)
+ FIELD(RNG_CTRL, RSVD, 1 , 12)
+ FIELD(RNG_CTRL, DIV, 13 , 8)
+
+REG32(RNG_SOFT_RESET, 0x04)
+REG32(RBG_SOFT_RESET, 0x08)
+REG32(RNG_TOTAL_BIT_COUNT, 0x0C)
+REG32(RNG_TOTAL_BIT_COUNT_THRESHOLD, 0x10)
+
+REG32(RNG_INT_STATUS, 0x18)
+ FIELD(RNG_INT_STATUS, TOTAL_BITS_COUNT_IRQ, 0, 1)
+ FIELD(RNG_INT_STATUS, RSVD0, 1, 4)
+ FIELD(RNG_INT_STATUS, NIST_FAIL_IRQ, 5, 1)
+ FIELD(RNG_INT_STATUS, RSVD1, 6, 11)
+ FIELD(RNG_INT_STATUS, STARTUP_TRANSITIONS_MET_IRQ, 17, 1)
+ FIELD(RNG_INT_STATUS, RSVD2, 18, 13)
+ FIELD(RNG_INT_STATUS, MASTER_FAIL_LOCKOUT_IRQ, 30, 1)
+
+REG32(RNG_INT_ENABLE, 0x1C)
+ FIELD(RNG_INT_ENABLE, TOTAL_BITS_COUNT_IRQ, 0, 1)
+ FIELD(RNG_INT_ENABLE, RSVD0, 1, 4)
+ FIELD(RNG_INT_ENABLE, NIST_FAIL_IRQ, 5, 1)
+ FIELD(RNG_INT_ENABLE, RSVD1, 6, 11)
+ FIELD(RNG_INT_ENABLE, STARTUP_TRANSITIONS_MET_IRQ, 17, 1)
+ FIELD(RNG_INT_ENABLE, RSVD2, 18, 13)
+ FIELD(RNG_INT_ENABLE, MASTER_FAIL_LOCKOUT_IRQ, 30, 1)
+
+REG32(RNG_FIFO_DATA, 0x20)
+
+REG32(RNG_FIFO_COUNT, 0x24)
+ FIELD(RNG_FIFO_COUNT, COUNT, 0, 8)
+ FIELD(RNG_FIFO_COUNT, THRESHOLD, 8, 8)
+
+
+#define RNG_WARM_UP_PERIOD_ELAPSED 17
+
+#define SOFT_RESET 1
+#define IRQ_PENDING 1
+
+#define BCM2838_RNG200_PTIMER_POLICY (PTIMER_POLICY_CONTINUOUS_TRIGGER)
static const VMStateDescription vmstate_bcm2838_rng200 = {
.name = "bcm2838_rng200",
@@ -37,33 +68,253 @@ static const VMStateDescription vmstate_bcm2838_rng200 = {
VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
VMSTATE_BOOL(use_timer, BCM2838Rng200State),
- VMSTATE_STRUCT(regs, BCM2838Rng200State, 0, vmstate_bcm2838_rng200_regs,
- BCM2838_rng_regs_t),
+ VMSTATE_ARRAY(regs, BCM2838Rng200State, N_BCM2838_RNG200_REGS, 0,
+ vmstate_info_uint32, uint32_t),
VMSTATE_END_OF_LIST()
}
};
-static void bcm2838_rng200_rng_reset(BCM2838Rng200State *state)
+static bool is_rbg_enabled(BCM2838Rng200State *s)
+{
+ return FIELD_EX32(s->regs[R_RNG_CTRL], RNG_CTRL, RBG_ENABLE);
+}
+
+static void increment_bit_counter_by(BCM2838Rng200State *s, uint32_t inc_val) {
+ s->regs[R_RNG_TOTAL_BIT_COUNT] += inc_val;
+}
+
+static void bcm2838_rng200_update_irq(BCM2838Rng200State *s)
+{
+ qemu_set_irq(s->irq,
+ !!(s->regs[R_RNG_INT_ENABLE] & s->regs[R_RNG_INT_STATUS]));
+}
+
+static void bcm2838_rng200_update_fifo(void *opaque, const void *buf,
+ size_t size)
{
- state->regs.ctrl = 0;
+ BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
+ Fifo8 *fifo = &s->fifo;
+ size_t num = MIN(size, fifo8_num_free(fifo));
+ uint32_t num_bits = num * 8;
+ uint32_t bit_threshold_left = 0;
+ uint32_t bit_count = 0;
+ uint32_t bit_count_thld = 0;
+ uint32_t fifo_thld = 0;
+
+ increment_bit_counter_by(s, num_bits);
+
+ bit_count = s->regs[R_RNG_TOTAL_BIT_COUNT];
+ bit_count_thld = s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD];
+
+ bit_threshold_left = (bit_count < bit_count_thld)
+ ? bit_count_thld - bit_count
+ : 0;
+
+ if (bit_threshold_left < num_bits) {
+ num_bits -= bit_threshold_left;
+ } else {
+ num_bits = 0;
+ }
+
+ num = num_bits / 8;
+ if ((num == 0) && (num_bits > 0)) {
+ num = 1;
+ }
+ if (num > 0) {
+ fifo8_push_all(fifo, buf, num);
+
+
+ fifo_thld = FIELD_EX32(s->regs[R_RNG_FIFO_COUNT],
+ RNG_FIFO_COUNT, THRESHOLD);
+
+ if (fifo8_num_used(fifo) > fifo_thld) {
+ s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
+ RNG_INT_STATUS,
+ TOTAL_BITS_COUNT_IRQ, 1);
+ }
+ }
+
+ s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
+ RNG_FIFO_COUNT,
+ COUNT,
+ fifo8_num_used(fifo) >> 2);
+ bcm2838_rng200_update_irq(s);
+ trace_bcm2838_rng200_update_fifo(num, fifo8_num_used(fifo));
+}
+
+static void bcm2838_rng200_fill_fifo(BCM2838Rng200State *s)
+{
+ rng_backend_request_entropy(s->rng, fifo8_num_free(&s->fifo),
+ bcm2838_rng200_update_fifo, s);
+}
+
+/* This function will be implemnented in upcoming commits */
+static void bcm2838_rng200_disable_rbg(BCM2838Rng200State *s
+ __attribute__((unused)))
+{
+ trace_bcm2838_rng200_disable_rbg();
+}
+
+static void bcm2838_rng200_enable_rbg(BCM2838Rng200State *s)
+{
+ s->regs[R_RNG_TOTAL_BIT_COUNT] = RNG_WARM_UP_PERIOD_ELAPSED;
+
+ bcm2838_rng200_fill_fifo(s);
+
+ trace_bcm2838_rng200_enable_rbg();
+}
+
+static void bcm2838_rng200_rng_reset(BCM2838Rng200State *s)
+{
+ memset(s->regs, 0, sizeof(s->regs));
+ s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
+ RNG_INT_STATUS,
+ STARTUP_TRANSITIONS_MET_IRQ,
+ IRQ_PENDING);
+ fifo8_reset(&s->fifo);
trace_bcm2838_rng200_rng_soft_reset();
}
+static void bcm2838_rng200_rbg_reset(BCM2838Rng200State *s)
+{
+ trace_bcm2838_rng200_rbg_soft_reset();
+}
+
+static uint32_t bcm2838_rng200_read_fifo_data(BCM2838Rng200State *s)
+{
+ Fifo8 *fifo = &s->fifo;
+ const uint8_t *buf;
+ uint32_t ret = 0;
+ uint32_t num = 0;
+ uint32_t max = MIN(fifo8_num_used(fifo), sizeof(ret));
+
+ if (max > 0) {
+ buf = fifo8_pop_buf(fifo, max, &num);
+ if ((buf != NULL) && (num > 0)) {
+ memcpy(&ret, buf, num);
+ }
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "bcm2838_rng200_read_fifo_data: FIFO is empty\n"
+ );
+ }
+
+ s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
+ RNG_FIFO_COUNT,
+ COUNT,
+ fifo8_num_used(fifo) >> 2);
+
+ bcm2838_rng200_fill_fifo(s);
+
+ return ret;
+}
+
+static void bcm2838_rng200_ctrl_write(BCM2838Rng200State *s, uint32_t value)
+{
+ bool currently_enabled = is_rbg_enabled(s);
+ bool enable_requested = FIELD_EX32(value, RNG_CTRL, RBG_ENABLE);
+
+ s->regs[R_RNG_CTRL] = value;
+
+ if (!currently_enabled && enable_requested) {
+ bcm2838_rng200_enable_rbg(s);
+ } else if (currently_enabled && !enable_requested) {
+ bcm2838_rng200_disable_rbg(s);
+ }
+}
+
static uint64_t bcm2838_rng200_read(void *opaque, hwaddr offset,
unsigned size)
{
+ BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
uint32_t res = 0;
- /* will be implemented in upcoming commits */
+ switch (offset) {
+ case A_RNG_CTRL:
+ res = s->regs[R_RNG_CTRL];
+ break;
+ case A_RNG_SOFT_RESET:
+ case A_RBG_SOFT_RESET:
+ break;
+ case A_RNG_INT_STATUS:
+ res = s->regs[R_RNG_INT_STATUS];
+ break;
+ case A_RNG_INT_ENABLE:
+ res = s->regs[R_RNG_INT_ENABLE];
+ break;
+ case A_RNG_FIFO_DATA:
+ res = bcm2838_rng200_read_fifo_data(s);
+ break;
+ case A_RNG_FIFO_COUNT:
+ res = s->regs[R_RNG_FIFO_COUNT];
+ break;
+ case A_RNG_TOTAL_BIT_COUNT:
+ res = s->regs[R_RNG_TOTAL_BIT_COUNT];
+ break;
+ case A_RNG_TOTAL_BIT_COUNT_THRESHOLD:
+ res = s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD];
+ break;
+ default:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "bcm2838_rng200_read: Bad offset 0x%" HWADDR_PRIx "\n",
+ offset
+ );
+ res = 0;
+ break;
+ }
+
+ trace_bcm2838_rng200_read(offset, size, res);
return res;
}
static void bcm2838_rng200_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
- /* will be implemented in upcoming commits */
+ BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
+
+ trace_bcm2838_rng200_write(offset, value, size);
+
+ switch (offset) {
+ case A_RNG_CTRL:
+ bcm2838_rng200_ctrl_write(s, value);
+ break;
+ case A_RNG_SOFT_RESET:
+ if (value & SOFT_RESET) {
+ bcm2838_rng200_rng_reset(s);
+ }
+ break;
+ case A_RBG_SOFT_RESET:
+ if (value & SOFT_RESET) {
+ bcm2838_rng200_rbg_reset(s);
+ }
+ break;
+ case A_RNG_INT_STATUS:
+ s->regs[R_RNG_INT_STATUS] &= ~value;
+ bcm2838_rng200_update_irq(s);
+ break;
+ case A_RNG_INT_ENABLE:
+ s->regs[R_RNG_INT_ENABLE] = value;
+ bcm2838_rng200_update_irq(s);
+ break;
+ case A_RNG_FIFO_COUNT:
+ s->regs[R_RNG_FIFO_COUNT] = value;
+ break;
+ case A_RNG_TOTAL_BIT_COUNT_THRESHOLD:
+ s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD] = value;
+ s->regs[R_RNG_TOTAL_BIT_COUNT] = value + 1;
+ break;
+ default:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "bcm2838_rng200_write: Bad offset 0x%" HWADDR_PRIx "\n",
+ offset
+ );
+ break;
+ }
}
static const MemoryRegionOps bcm2838_rng200_ops = {
@@ -87,6 +338,7 @@ static void bcm2838_rng200_realize(DeviceState *dev, Error **errp)
errp);
}
+ fifo8_create(&s->fifo, s->rng_fifo_cap);
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
}
@@ -116,6 +368,8 @@ static void bcm2838_rng200_init(Object *obj)
static void bcm2838_rng200_reset(DeviceState *dev)
{
BCM2838Rng200State *s = BCM2838_RNG200(dev);
+
+ bcm2838_rng200_rbg_reset(s);
bcm2838_rng200_rng_reset(s);
}
diff --git a/include/hw/misc/bcm2838_rng200.h b/include/hw/misc/bcm2838_rng200.h
index c9c52f84be..46fdba48da 100644
--- a/include/hw/misc/bcm2838_rng200.h
+++ b/include/hw/misc/bcm2838_rng200.h
@@ -22,13 +22,7 @@
#define TYPE_BCM2838_RNG200 "bcm2838-rng200"
OBJECT_DECLARE_SIMPLE_TYPE(BCM2838Rng200State, BCM2838_RNG200)
-typedef struct {
- uint32_t ctrl;
- uint32_t int_status;
- uint32_t fifo_count;
- uint32_t fifo_count_threshold;
- uint32_t total_bit_count_threshold;
-} BCM2838_rng_regs_t;
+#define N_BCM2838_RNG200_REGS 9
struct BCM2838Rng200State {
SysBusDevice busdev;
@@ -45,7 +39,7 @@ struct BCM2838Rng200State {
Fifo8 fifo;
qemu_irq irq;
- BCM2838_rng_regs_t regs;
+ uint32_t regs[N_BCM2838_RNG200_REGS];
};
#endif /* BCM2838_RNG200_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 18/45] Add RNG200 RNG and RBG
2023-12-08 2:31 ` [PATCH v4 18/45] Add RNG200 RNG and RBG Sergey Kambalin
@ 2024-01-15 14:29 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:29 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:40, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/misc/bcm2838_rng200.c | 292 +++++++++++++++++++++++++++++--
> include/hw/misc/bcm2838_rng200.h | 10 +-
> 2 files changed, 275 insertions(+), 27 deletions(-)
>
> diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
> index 8f64e6a20f..f91ea0754c 100644
> --- a/hw/misc/bcm2838_rng200.c
> +++ b/hw/misc/bcm2838_rng200.c
> @@ -8,25 +8,56 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qemu/log.h"
> #include "qapi/error.h"
> #include "hw/qdev-properties.h"
> #include "hw/misc/bcm2838_rng200.h"
> +#include "hw/registerfields.h"
> #include "migration/vmstate.h"
> #include "trace.h"
>
> -static const VMStateDescription vmstate_bcm2838_rng200_regs = {
> - .name = "bcm2838_rng200_regs",
> - .version_id = 1,
> - .minimum_version_id = 1,
> - .fields = (VMStateField[]) {
> - VMSTATE_UINT32(ctrl, BCM2838_rng_regs_t),
> - VMSTATE_UINT32(int_status, BCM2838_rng_regs_t),
> - VMSTATE_UINT32(fifo_count, BCM2838_rng_regs_t),
> - VMSTATE_UINT32(fifo_count_threshold, BCM2838_rng_regs_t),
> - VMSTATE_UINT32(total_bit_count_threshold, BCM2838_rng_regs_t),
> - VMSTATE_END_OF_LIST()
> - }
> -};
> +/* RNG200 registers */
> +REG32(RNG_CTRL, 0x00)
> + FIELD(RNG_CTRL, RBG_ENABLE, 0 , 1)
> + FIELD(RNG_CTRL, RSVD, 1 , 12)
> + FIELD(RNG_CTRL, DIV, 13 , 8)
> +
> +REG32(RNG_SOFT_RESET, 0x04)
> +REG32(RBG_SOFT_RESET, 0x08)
> +REG32(RNG_TOTAL_BIT_COUNT, 0x0C)
> +REG32(RNG_TOTAL_BIT_COUNT_THRESHOLD, 0x10)
> +
> +REG32(RNG_INT_STATUS, 0x18)
> + FIELD(RNG_INT_STATUS, TOTAL_BITS_COUNT_IRQ, 0, 1)
> + FIELD(RNG_INT_STATUS, RSVD0, 1, 4)
> + FIELD(RNG_INT_STATUS, NIST_FAIL_IRQ, 5, 1)
> + FIELD(RNG_INT_STATUS, RSVD1, 6, 11)
> + FIELD(RNG_INT_STATUS, STARTUP_TRANSITIONS_MET_IRQ, 17, 1)
> + FIELD(RNG_INT_STATUS, RSVD2, 18, 13)
> + FIELD(RNG_INT_STATUS, MASTER_FAIL_LOCKOUT_IRQ, 30, 1)
> +
> +REG32(RNG_INT_ENABLE, 0x1C)
> + FIELD(RNG_INT_ENABLE, TOTAL_BITS_COUNT_IRQ, 0, 1)
> + FIELD(RNG_INT_ENABLE, RSVD0, 1, 4)
> + FIELD(RNG_INT_ENABLE, NIST_FAIL_IRQ, 5, 1)
> + FIELD(RNG_INT_ENABLE, RSVD1, 6, 11)
> + FIELD(RNG_INT_ENABLE, STARTUP_TRANSITIONS_MET_IRQ, 17, 1)
> + FIELD(RNG_INT_ENABLE, RSVD2, 18, 13)
> + FIELD(RNG_INT_ENABLE, MASTER_FAIL_LOCKOUT_IRQ, 30, 1)
> +
> +REG32(RNG_FIFO_DATA, 0x20)
> +
> +REG32(RNG_FIFO_COUNT, 0x24)
> + FIELD(RNG_FIFO_COUNT, COUNT, 0, 8)
> + FIELD(RNG_FIFO_COUNT, THRESHOLD, 8, 8)
> +
> +
> +#define RNG_WARM_UP_PERIOD_ELAPSED 17
> +
> +#define SOFT_RESET 1
> +#define IRQ_PENDING 1
> +
> +#define BCM2838_RNG200_PTIMER_POLICY (PTIMER_POLICY_CONTINUOUS_TRIGGER)
>
> static const VMStateDescription vmstate_bcm2838_rng200 = {
> .name = "bcm2838_rng200",
> @@ -37,33 +68,253 @@ static const VMStateDescription vmstate_bcm2838_rng200 = {
> VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
> VMSTATE_BOOL(use_timer, BCM2838Rng200State),
>
> - VMSTATE_STRUCT(regs, BCM2838Rng200State, 0, vmstate_bcm2838_rng200_regs,
> - BCM2838_rng_regs_t),
> + VMSTATE_ARRAY(regs, BCM2838Rng200State, N_BCM2838_RNG200_REGS, 0,
> + vmstate_info_uint32, uint32_t),
>
> VMSTATE_END_OF_LIST()
> }
> };
>
> -static void bcm2838_rng200_rng_reset(BCM2838Rng200State *state)
> +static bool is_rbg_enabled(BCM2838Rng200State *s)
> +{
> + return FIELD_EX32(s->regs[R_RNG_CTRL], RNG_CTRL, RBG_ENABLE);
> +}
> +
> +static void increment_bit_counter_by(BCM2838Rng200State *s, uint32_t inc_val) {
> + s->regs[R_RNG_TOTAL_BIT_COUNT] += inc_val;
> +}
> +
> +static void bcm2838_rng200_update_irq(BCM2838Rng200State *s)
> +{
> + qemu_set_irq(s->irq,
> + !!(s->regs[R_RNG_INT_ENABLE] & s->regs[R_RNG_INT_STATUS]));
> +}
> +
> +static void bcm2838_rng200_update_fifo(void *opaque, const void *buf,
> + size_t size)
> {
> - state->regs.ctrl = 0;
> + BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
> + Fifo8 *fifo = &s->fifo;
> + size_t num = MIN(size, fifo8_num_free(fifo));
> + uint32_t num_bits = num * 8;
> + uint32_t bit_threshold_left = 0;
> + uint32_t bit_count = 0;
> + uint32_t bit_count_thld = 0;
> + uint32_t fifo_thld = 0;
> +
> + increment_bit_counter_by(s, num_bits);
> +
> + bit_count = s->regs[R_RNG_TOTAL_BIT_COUNT];
> + bit_count_thld = s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD];
> +
> + bit_threshold_left = (bit_count < bit_count_thld)
> + ? bit_count_thld - bit_count
> + : 0;
> +
> + if (bit_threshold_left < num_bits) {
> + num_bits -= bit_threshold_left;
> + } else {
> + num_bits = 0;
> + }
Is it really correct that we first increment the
bit counter by num_bits, and then check for "is
there enough space between the bit counter and
the counter threshold" ? And then subtracting
threshold_left from num_bits also looks odd --
if we want to write 32 bits and we have 8 bits
left then this will cause us to write 24 bits ??
> +
> + num = num_bits / 8;
> + if ((num == 0) && (num_bits > 0)) {
> + num = 1;
> + }
This also looks odd -- why is "number of bits is
between 1 and 7" a special case when other numbers
of bits that aren't an even multiple of 8 are not?
> + if (num > 0) {
> + fifo8_push_all(fifo, buf, num);
> +
> +
> + fifo_thld = FIELD_EX32(s->regs[R_RNG_FIFO_COUNT],
> + RNG_FIFO_COUNT, THRESHOLD);
> +
> + if (fifo8_num_used(fifo) > fifo_thld) {
> + s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
> + RNG_INT_STATUS,
> + TOTAL_BITS_COUNT_IRQ, 1);
> + }
> + }
> +
> + s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
> + RNG_FIFO_COUNT,
> + COUNT,
> + fifo8_num_used(fifo) >> 2);
> + bcm2838_rng200_update_irq(s);
> + trace_bcm2838_rng200_update_fifo(num, fifo8_num_used(fifo));
> +}
> +
> +static void bcm2838_rng200_fill_fifo(BCM2838Rng200State *s)
> +{
> + rng_backend_request_entropy(s->rng, fifo8_num_free(&s->fifo),
> + bcm2838_rng200_update_fifo, s);
> +}
> +
> +/* This function will be implemnented in upcoming commits */
"implemented"
> +static void bcm2838_rng200_disable_rbg(BCM2838Rng200State *s
> + __attribute__((unused)))
> +{
> + trace_bcm2838_rng200_disable_rbg();
> +}
> +
> +static void bcm2838_rng200_enable_rbg(BCM2838Rng200State *s)
> +{
> + s->regs[R_RNG_TOTAL_BIT_COUNT] = RNG_WARM_UP_PERIOD_ELAPSED;
> +
> + bcm2838_rng200_fill_fifo(s);
> +
> + trace_bcm2838_rng200_enable_rbg();
> +}
> +
> +static void bcm2838_rng200_rng_reset(BCM2838Rng200State *s)
> +{
> + memset(s->regs, 0, sizeof(s->regs));
> + s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
> + RNG_INT_STATUS,
> + STARTUP_TRANSITIONS_MET_IRQ,
> + IRQ_PENDING);
> + fifo8_reset(&s->fifo);
>
> trace_bcm2838_rng200_rng_soft_reset();
> }
>
> +static void bcm2838_rng200_rbg_reset(BCM2838Rng200State *s)
> +{
> + trace_bcm2838_rng200_rbg_soft_reset();
> +}
> +
> +static uint32_t bcm2838_rng200_read_fifo_data(BCM2838Rng200State *s)
> +{
> + Fifo8 *fifo = &s->fifo;
> + const uint8_t *buf;
> + uint32_t ret = 0;
> + uint32_t num = 0;
> + uint32_t max = MIN(fifo8_num_used(fifo), sizeof(ret));
> +
> + if (max > 0) {
> + buf = fifo8_pop_buf(fifo, max, &num);
> + if ((buf != NULL) && (num > 0)) {
> + memcpy(&ret, buf, num);
> + }
> + } else {
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "bcm2838_rng200_read_fifo_data: FIFO is empty\n"
> + );
> + }
> +
> + s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
> + RNG_FIFO_COUNT,
> + COUNT,
> + fifo8_num_used(fifo) >> 2);
> +
> + bcm2838_rng200_fill_fifo(s);
> +
> + return ret;
> +}
> +
> +static void bcm2838_rng200_ctrl_write(BCM2838Rng200State *s, uint32_t value)
> +{
> + bool currently_enabled = is_rbg_enabled(s);
> + bool enable_requested = FIELD_EX32(value, RNG_CTRL, RBG_ENABLE);
> +
> + s->regs[R_RNG_CTRL] = value;
> +
> + if (!currently_enabled && enable_requested) {
> + bcm2838_rng200_enable_rbg(s);
> + } else if (currently_enabled && !enable_requested) {
> + bcm2838_rng200_disable_rbg(s);
> + }
> +}
> +
> static uint64_t bcm2838_rng200_read(void *opaque, hwaddr offset,
> unsigned size)
> {
> + BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
> uint32_t res = 0;
>
> - /* will be implemented in upcoming commits */
> + switch (offset) {
> + case A_RNG_CTRL:
> + res = s->regs[R_RNG_CTRL];
> + break;
> + case A_RNG_SOFT_RESET:
> + case A_RBG_SOFT_RESET:
> + break;
> + case A_RNG_INT_STATUS:
> + res = s->regs[R_RNG_INT_STATUS];
> + break;
> + case A_RNG_INT_ENABLE:
> + res = s->regs[R_RNG_INT_ENABLE];
> + break;
> + case A_RNG_FIFO_DATA:
> + res = bcm2838_rng200_read_fifo_data(s);
> + break;
> + case A_RNG_FIFO_COUNT:
> + res = s->regs[R_RNG_FIFO_COUNT];
> + break;
> + case A_RNG_TOTAL_BIT_COUNT:
> + res = s->regs[R_RNG_TOTAL_BIT_COUNT];
> + break;
> + case A_RNG_TOTAL_BIT_COUNT_THRESHOLD:
> + res = s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD];
> + break;
> + default:
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "bcm2838_rng200_read: Bad offset 0x%" HWADDR_PRIx "\n",
> + offset
> + );
> + res = 0;
> + break;
> + }
> +
> + trace_bcm2838_rng200_read(offset, size, res);
> return res;
> }
>
> static void bcm2838_rng200_write(void *opaque, hwaddr offset,
> uint64_t value, unsigned size)
> {
> - /* will be implemented in upcoming commits */
> + BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
> +
> + trace_bcm2838_rng200_write(offset, value, size);
> +
> + switch (offset) {
> + case A_RNG_CTRL:
> + bcm2838_rng200_ctrl_write(s, value);
> + break;
> + case A_RNG_SOFT_RESET:
> + if (value & SOFT_RESET) {
> + bcm2838_rng200_rng_reset(s);
> + }
> + break;
> + case A_RBG_SOFT_RESET:
> + if (value & SOFT_RESET) {
> + bcm2838_rng200_rbg_reset(s);
> + }
> + break;
> + case A_RNG_INT_STATUS:
> + s->regs[R_RNG_INT_STATUS] &= ~value;
> + bcm2838_rng200_update_irq(s);
> + break;
> + case A_RNG_INT_ENABLE:
> + s->regs[R_RNG_INT_ENABLE] = value;
> + bcm2838_rng200_update_irq(s);
> + break;
> + case A_RNG_FIFO_COUNT:
> + s->regs[R_RNG_FIFO_COUNT] = value;
> + break;
> + case A_RNG_TOTAL_BIT_COUNT_THRESHOLD:
> + s->regs[R_RNG_TOTAL_BIT_COUNT_THRESHOLD] = value;
> + s->regs[R_RNG_TOTAL_BIT_COUNT] = value + 1;
> + break;
> + default:
> + qemu_log_mask(
> + LOG_GUEST_ERROR,
> + "bcm2838_rng200_write: Bad offset 0x%" HWADDR_PRIx "\n",
> + offset
> + );
> + break;
> + }
> }
>
> static const MemoryRegionOps bcm2838_rng200_ops = {
> @@ -87,6 +338,7 @@ static void bcm2838_rng200_realize(DeviceState *dev, Error **errp)
> errp);
> }
>
> + fifo8_create(&s->fifo, s->rng_fifo_cap);
> sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
> }
>
> @@ -116,6 +368,8 @@ static void bcm2838_rng200_init(Object *obj)
> static void bcm2838_rng200_reset(DeviceState *dev)
> {
> BCM2838Rng200State *s = BCM2838_RNG200(dev);
> +
> + bcm2838_rng200_rbg_reset(s);
> bcm2838_rng200_rng_reset(s);
> }
>
> diff --git a/include/hw/misc/bcm2838_rng200.h b/include/hw/misc/bcm2838_rng200.h
> index c9c52f84be..46fdba48da 100644
> --- a/include/hw/misc/bcm2838_rng200.h
> +++ b/include/hw/misc/bcm2838_rng200.h
> @@ -22,13 +22,7 @@
> #define TYPE_BCM2838_RNG200 "bcm2838-rng200"
> OBJECT_DECLARE_SIMPLE_TYPE(BCM2838Rng200State, BCM2838_RNG200)
>
> -typedef struct {
> - uint32_t ctrl;
> - uint32_t int_status;
> - uint32_t fifo_count;
> - uint32_t fifo_count_threshold;
> - uint32_t total_bit_count_threshold;
> -} BCM2838_rng_regs_t;
> +#define N_BCM2838_RNG200_REGS 9
>
> struct BCM2838Rng200State {
> SysBusDevice busdev;
> @@ -45,7 +39,7 @@ struct BCM2838Rng200State {
> Fifo8 fifo;
> qemu_irq irq;
>
> - BCM2838_rng_regs_t regs;
> + uint32_t regs[N_BCM2838_RNG200_REGS];
> };
>
> #endif /* BCM2838_RNG200_H */
> --
> 2.34.1
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 19/45] Get rid of RNG200 timer
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (17 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 18/45] Add RNG200 RNG and RBG Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:33 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 20/45] Implement BCM2838 thermal sensor Sergey Kambalin
` (27 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 14 +++++
hw/arm/raspi4b.c | 1 -
hw/misc/bcm2838_rng200.c | 78 ++++++++++++++++------------
include/hw/arm/bcm2838_peripherals.h | 2 +
include/hw/misc/bcm2838_rng200.h | 4 +-
5 files changed, 63 insertions(+), 36 deletions(-)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index ee06214715..7c489c8e8a 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -34,6 +34,9 @@ static void bcm2838_peripherals_init(Object *obj)
bc->peri_low_size);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
+ /* Random Number Generator */
+ object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
+
/* PCIe Host Bridge */
object_initialize_child(obj, "pcie-host", &s->pcie_host,
TYPE_BCM2838_PCIE_HOST);
@@ -85,6 +88,17 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
BCM2838_VC_PERI_LOW_BASE,
&s->peri_low_mr_alias, 1);
+ /* Random Number Generator */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
+ return;
+ }
+ memory_region_add_subregion(
+ &s_base->peri_mr, RNG_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
+ qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
+ INTERRUPT_RNG));
+
/* Extended Mass Media Controller 2 */
object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
&error_abort);
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index 2e8474e1c5..7b5385b8dd 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
/* Temporarily disable following devices until they are implemented*/
const char *to_be_removed_from_dt_as_wa[] = {
- "brcm,bcm2711-rng200",
"brcm,bcm2711-thermal",
"brcm,bcm2711-genet-v5",
};
diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
index f91ea0754c..1b334b94d5 100644
--- a/hw/misc/bcm2838_rng200.c
+++ b/hw/misc/bcm2838_rng200.c
@@ -9,6 +9,7 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
+#include "qom/object_interfaces.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/misc/bcm2838_rng200.h"
@@ -64,10 +65,7 @@ static const VMStateDescription vmstate_bcm2838_rng200 = {
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
- VMSTATE_UINT32(rbg_period, BCM2838Rng200State),
VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
- VMSTATE_BOOL(use_timer, BCM2838Rng200State),
-
VMSTATE_ARRAY(regs, BCM2838Rng200State, N_BCM2838_RNG200_REGS, 0,
vmstate_info_uint32, uint32_t),
@@ -90,6 +88,15 @@ static void bcm2838_rng200_update_irq(BCM2838Rng200State *s)
!!(s->regs[R_RNG_INT_ENABLE] & s->regs[R_RNG_INT_STATUS]));
}
+static void bcm2838_rng200_update_rbg_period(void *opaque, ClockEvent event)
+{
+ BCM2838Rng200State *s = (BCM2838Rng200State *)opaque;
+
+ ptimer_transaction_begin(s->ptimer);
+ ptimer_set_period_from_clock(s->ptimer, s->clock, s->rng_fifo_cap * 8);
+ ptimer_transaction_commit(s->ptimer);
+}
+
static void bcm2838_rng200_update_fifo(void *opaque, const void *buf,
size_t size)
{
@@ -121,18 +128,17 @@ static void bcm2838_rng200_update_fifo(void *opaque, const void *buf,
if ((num == 0) && (num_bits > 0)) {
num = 1;
}
- if (num > 0) {
- fifo8_push_all(fifo, buf, num);
+ fifo8_push_all(fifo, buf, num);
- fifo_thld = FIELD_EX32(s->regs[R_RNG_FIFO_COUNT],
- RNG_FIFO_COUNT, THRESHOLD);
- if (fifo8_num_used(fifo) > fifo_thld) {
- s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
- RNG_INT_STATUS,
- TOTAL_BITS_COUNT_IRQ, 1);
- }
+ fifo_thld = FIELD_EX32(s->regs[R_RNG_FIFO_COUNT],
+ RNG_FIFO_COUNT, THRESHOLD);
+
+ if (fifo8_num_used(fifo) > fifo_thld) {
+ s->regs[R_RNG_INT_STATUS] = FIELD_DP32(s->regs[R_RNG_INT_STATUS],
+ RNG_INT_STATUS,
+ TOTAL_BITS_COUNT_IRQ, 1);
}
s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
@@ -149,9 +155,7 @@ static void bcm2838_rng200_fill_fifo(BCM2838Rng200State *s)
bcm2838_rng200_update_fifo, s);
}
-/* This function will be implemnented in upcoming commits */
-static void bcm2838_rng200_disable_rbg(BCM2838Rng200State *s
- __attribute__((unused)))
+static void bcm2838_rng200_disable_rbg(void)
{
trace_bcm2838_rng200_disable_rbg();
}
@@ -184,23 +188,21 @@ static void bcm2838_rng200_rbg_reset(BCM2838Rng200State *s)
static uint32_t bcm2838_rng200_read_fifo_data(BCM2838Rng200State *s)
{
- Fifo8 *fifo = &s->fifo;
const uint8_t *buf;
+ Fifo8 *fifo = &s->fifo;
+ uint32_t to_read = MIN(fifo8_num_used(fifo), 4);
+ uint8_t byte_buf[4] = {};
+ uint8_t *p = byte_buf;
uint32_t ret = 0;
uint32_t num = 0;
- uint32_t max = MIN(fifo8_num_used(fifo), sizeof(ret));
- if (max > 0) {
- buf = fifo8_pop_buf(fifo, max, &num);
- if ((buf != NULL) && (num > 0)) {
- memcpy(&ret, buf, num);
- }
- } else {
- qemu_log_mask(
- LOG_GUEST_ERROR,
- "bcm2838_rng200_read_fifo_data: FIFO is empty\n"
- );
+ while (to_read) {
+ buf = fifo8_pop_buf(fifo, to_read, &num);
+ memcpy(p, buf, num);
+ p += num;
+ to_read -= num;
}
+ ret = ldl_le_p(byte_buf);
s->regs[R_RNG_FIFO_COUNT] = FIELD_DP32(s->regs[R_RNG_FIFO_COUNT],
RNG_FIFO_COUNT,
@@ -222,7 +224,7 @@ static void bcm2838_rng200_ctrl_write(BCM2838Rng200State *s, uint32_t value)
if (!currently_enabled && enable_requested) {
bcm2838_rng200_enable_rbg(s);
} else if (currently_enabled && !enable_requested) {
- bcm2838_rng200_disable_rbg(s);
+ bcm2838_rng200_disable_rbg();
}
}
@@ -321,6 +323,14 @@ static const MemoryRegionOps bcm2838_rng200_ops = {
.read = bcm2838_rng200_read,
.write = bcm2838_rng200_write,
.endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .max_access_size = 4,
+ .min_access_size = 4,
+ },
+ .valid = {
+ .max_access_size = 4,
+ .min_access_size = 4
+ },
};
static void bcm2838_rng200_realize(DeviceState *dev, Error **errp)
@@ -330,6 +340,13 @@ static void bcm2838_rng200_realize(DeviceState *dev, Error **errp)
if (s->rng == NULL) {
Object *default_backend = object_new(TYPE_RNG_BUILTIN);
+ if (!user_creatable_complete(USER_CREATABLE(default_backend),
+ errp)) {
+ object_unref(default_backend);
+ error_setg(errp, "Failed to create user creatable RNG backend");
+ return;
+ }
+
object_property_add_child(OBJECT(dev), "default-backend",
default_backend);
object_unref(default_backend);
@@ -347,13 +364,10 @@ static void bcm2838_rng200_init(Object *obj)
BCM2838Rng200State *s = BCM2838_RNG200(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
- s->rbg_period = 250;
- s->use_timer = true;
-
s->rng_fifo_cap = 128;
s->clock = qdev_init_clock_in(DEVICE(s), "rbg-clock",
- NULL, s,
+ bcm2838_rng200_update_rbg_period, s,
ClockPreUpdate);
if (s->clock == NULL) {
error_setg(&error_fatal, "Failed to init RBG clock");
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 2af96df1c6..317df005bf 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -10,6 +10,7 @@
#define BCM2838_PERIPHERALS_H
#include "hw/arm/bcm2835_peripherals.h"
+#include "hw/misc/bcm2838_rng200.h"
#include "hw/arm/bcm2838_pcie.h"
#include "hw/sd/sdhci.h"
#include "hw/gpio/bcm2838_gpio.h"
@@ -65,6 +66,7 @@ struct BCM2838PeripheralState {
MemoryRegion mphi_mr_alias;
MemoryRegion pcie_mmio_alias;
+ BCM2838Rng200State rng200;
SDHCIState emmc2;
BCM2838PcieHostState pcie_host;
BCM2838GpioState gpio;
diff --git a/include/hw/misc/bcm2838_rng200.h b/include/hw/misc/bcm2838_rng200.h
index 46fdba48da..8e084b7254 100644
--- a/include/hw/misc/bcm2838_rng200.h
+++ b/include/hw/misc/bcm2838_rng200.h
@@ -32,11 +32,9 @@ struct BCM2838Rng200State {
RngBackend *rng;
Clock *clock;
- uint32_t rbg_period;
uint32_t rng_fifo_cap;
- bool use_timer;
-
Fifo8 fifo;
+
qemu_irq irq;
uint32_t regs[N_BCM2838_RNG200_REGS];
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 19/45] Get rid of RNG200 timer
2023-12-08 2:31 ` [PATCH v4 19/45] Get rid of RNG200 timer Sergey Kambalin
@ 2024-01-15 14:33 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:33 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:34, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
The commit message doesn't seem to match the changes here.
> ---
> hw/arm/bcm2838_peripherals.c | 14 +++++
> hw/arm/raspi4b.c | 1 -
> hw/misc/bcm2838_rng200.c | 78 ++++++++++++++++------------
> include/hw/arm/bcm2838_peripherals.h | 2 +
> include/hw/misc/bcm2838_rng200.h | 4 +-
> 5 files changed, 63 insertions(+), 36 deletions(-)
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index ee06214715..7c489c8e8a 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -34,6 +34,9 @@ static void bcm2838_peripherals_init(Object *obj)
> bc->peri_low_size);
> sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
>
> + /* Random Number Generator */
> + object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
> +
> /* PCIe Host Bridge */
> object_initialize_child(obj, "pcie-host", &s->pcie_host,
> TYPE_BCM2838_PCIE_HOST);
> @@ -85,6 +88,17 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> BCM2838_VC_PERI_LOW_BASE,
> &s->peri_low_mr_alias, 1);
>
> + /* Random Number Generator */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
> + return;
> + }
> + memory_region_add_subregion(
> + &s_base->peri_mr, RNG_OFFSET,
> + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
> + qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
> + INTERRUPT_RNG));
> +
> /* Extended Mass Media Controller 2 */
> object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
> &error_abort);
> diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
> index 2e8474e1c5..7b5385b8dd 100644
> --- a/hw/arm/raspi4b.c
> +++ b/hw/arm/raspi4b.c
> @@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
>
> /* Temporarily disable following devices until they are implemented*/
> const char *to_be_removed_from_dt_as_wa[] = {
> - "brcm,bcm2711-rng200",
> "brcm,bcm2711-thermal",
> "brcm,bcm2711-genet-v5",
> };
These changes above here are all "add the rng200 device to the SoC".
They shouldn't be in the same patch as changes below which seem
to be adding/changing functionality in the device implementation.
I think the changes below (other than the change to
include/hw/arm/bcm2838_peripherals.h) should be in the previous patch(es).
> diff --git a/hw/misc/bcm2838_rng200.c b/hw/misc/bcm2838_rng200.c
> index f91ea0754c..1b334b94d5 100644
> --- a/hw/misc/bcm2838_rng200.c
> +++ b/hw/misc/bcm2838_rng200.c
> @@ -9,6 +9,7 @@
>
> #include "qemu/osdep.h"
> #include "qemu/log.h"
> +#include "qom/object_interfaces.h"
> #include "qapi/error.h"
> #include "hw/qdev-properties.h"
> #include "hw/misc/bcm2838_rng200.h"
> @@ -64,10 +65,7 @@ static const VMStateDescription vmstate_bcm2838_rng200 = {
> .version_id = 1,
> .minimum_version_id = 1,
> .fields = (VMStateField[]) {
> - VMSTATE_UINT32(rbg_period, BCM2838Rng200State),
> VMSTATE_UINT32(rng_fifo_cap, BCM2838Rng200State),
> - VMSTATE_BOOL(use_timer, BCM2838Rng200State),
> -
> VMSTATE_ARRAY(regs, BCM2838Rng200State, N_BCM2838_RNG200_REGS, 0,
> vmstate_info_uint32, uint32_t),
>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 20/45] Implement BCM2838 thermal sensor
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (18 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 19/45] Get rid of RNG200 timer Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:42 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 21/45] Add clock_isp stub Sergey Kambalin
` (26 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 27 ++++++--
hw/arm/raspi4b.c | 1 -
hw/misc/bcm2838_thermal.c | 98 ++++++++++++++++++++++++++++
hw/misc/meson.build | 3 +-
include/hw/arm/bcm2838_peripherals.h | 2 +
include/hw/misc/bcm2838_thermal.h | 24 +++++++
6 files changed, 147 insertions(+), 8 deletions(-)
create mode 100644 hw/misc/bcm2838_thermal.c
create mode 100644 include/hw/misc/bcm2838_thermal.h
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 7c489c8e8a..e9c6d47ba6 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -37,6 +37,9 @@ static void bcm2838_peripherals_init(Object *obj)
/* Random Number Generator */
object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
+ /* Thermal */
+ object_initialize_child(obj, "thermal", &s->thermal, TYPE_BCM2838_THERMAL);
+
/* PCIe Host Bridge */
object_initialize_child(obj, "pcie-host", &s->pcie_host,
TYPE_BCM2838_PCIE_HOST);
@@ -75,6 +78,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
MemoryRegion *regs_mr;
MemoryRegion *mmio_mr;
+ MemoryRegion *rng200_mr;
+ MemoryRegion *thermal_mr;
+ qemu_irq rng_200_irq;
int n;
@@ -92,12 +98,20 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
return;
}
- memory_region_add_subregion(
- &s_base->peri_mr, RNG_OFFSET,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
- sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
- qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
- INTERRUPT_RNG));
+ rng200_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0);
+ memory_region_add_subregion(&s_base->peri_mr, RNG_OFFSET, rng200_mr);
+
+ rng_200_irq = qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+ BCM2835_IC_GPU_IRQ, INTERRUPT_RNG);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0, rng_200_irq);
+
+
+ /* THERMAL */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->thermal), errp)) {
+ return;
+ }
+ thermal_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->thermal), 0);
+ memory_region_add_subregion( &s->peri_low_mr, 0x15D2000, thermal_mr);
/* Extended Mass Media Controller 2 */
object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
@@ -198,6 +212,7 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
BCM2838_MPHI_SIZE);
memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
&s->mphi_mr_alias);
+
/* PCIe Root Complex */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_host), errp)) {
return;
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index 7b5385b8dd..fda27d36cb 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
/* Temporarily disable following devices until they are implemented*/
const char *to_be_removed_from_dt_as_wa[] = {
- "brcm,bcm2711-thermal",
"brcm,bcm2711-genet-v5",
};
diff --git a/hw/misc/bcm2838_thermal.c b/hw/misc/bcm2838_thermal.c
new file mode 100644
index 0000000000..2301f657d0
--- /dev/null
+++ b/hw/misc/bcm2838_thermal.c
@@ -0,0 +1,98 @@
+/*
+ * BCM2838 dummy thermal sensor
+ *
+ * Copyright (C) 2022 Maksim Kopusov <maksim.kopusov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "hw/misc/bcm2838_thermal.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/error-report.h"
+
+REG32(STAT, 0x200)
+FIELD(STAT, DATA, 0, 10)
+FIELD(STAT, VALID_1, 10, 1)
+FIELD(STAT, VALID_2, 16, 1)
+
+#define BCM2838_THERMAL_SIZE 0xf00
+
+#define THERMAL_OFFSET_C 410040
+#define THERMAL_COEFF (-487.0f)
+#define MILLIDEGREE_COEFF 1000
+
+static uint16_t bcm2838_thermal_temp2adc(int temp_C)
+{
+ return (temp_C * MILLIDEGREE_COEFF - THERMAL_OFFSET_C) / THERMAL_COEFF;
+}
+
+static uint64_t bcm2838_thermal_read(void *opaque, hwaddr addr, unsigned size)
+{
+ uint32_t val = 0;
+
+ switch (addr) {
+ case A_STAT:
+ /* Temperature is always 25°C */
+ val = FIELD_DP32(val, STAT, DATA, bcm2838_thermal_temp2adc(25));
+ val = FIELD_DP32(val, STAT, VALID_1, 1);
+ val = FIELD_DP32(val, STAT, VALID_2, 1);
+
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s can't access addr: 0x%"PRIx64,
+ TYPE_BCM2838_THERMAL, addr);
+ }
+ return val;
+}
+
+static void bcm2838_thermal_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
+{
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: write 0x%" PRIx64
+ " to 0x%" HWADDR_PRIx "\n",
+ __func__, value, addr);
+}
+
+static const MemoryRegionOps bcm2838_thermal_ops = {
+ .read = bcm2838_thermal_read,
+ .write = bcm2838_thermal_write,
+ .impl.max_access_size = 4,
+ .valid.min_access_size = 4,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void bcm2838_thermal_realize(DeviceState *dev, Error **errp)
+{
+ Bcm2838ThermalState *s = BCM2838_THERMAL(dev);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &bcm2838_thermal_ops,
+ s, TYPE_BCM2838_THERMAL, BCM2838_THERMAL_SIZE);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+}
+
+static void bcm2838_thermal_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = bcm2838_thermal_realize;
+
+ /* This device has no state: no need for vmstate or reset */
+}
+
+static const TypeInfo bcm2838_thermal_info = {
+ .name = TYPE_BCM2838_THERMAL,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Bcm2838ThermalState),
+ .class_init = bcm2838_thermal_class_init,
+};
+
+static void bcm2838_thermal_register_types(void)
+{
+ type_register_static(&bcm2838_thermal_info);
+}
+
+type_init(bcm2838_thermal_register_types)
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index b899e6b596..386471a5e4 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -91,7 +91,8 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files(
'bcm2835_thermal.c',
'bcm2835_cprman.c',
'bcm2835_powermgt.c',
- 'bcm2838_rng200.c'
+ 'bcm2838_rng200.c',
+ 'bcm2838_thermal.c'
))
system_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
system_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 317df005bf..0e8465ba34 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -11,6 +11,7 @@
#include "hw/arm/bcm2835_peripherals.h"
#include "hw/misc/bcm2838_rng200.h"
+#include "hw/misc/bcm2838_thermal.h"
#include "hw/arm/bcm2838_pcie.h"
#include "hw/sd/sdhci.h"
#include "hw/gpio/bcm2838_gpio.h"
@@ -67,6 +68,7 @@ struct BCM2838PeripheralState {
MemoryRegion pcie_mmio_alias;
BCM2838Rng200State rng200;
+ Bcm2838ThermalState thermal;
SDHCIState emmc2;
BCM2838PcieHostState pcie_host;
BCM2838GpioState gpio;
diff --git a/include/hw/misc/bcm2838_thermal.h b/include/hw/misc/bcm2838_thermal.h
new file mode 100644
index 0000000000..bb6302a037
--- /dev/null
+++ b/include/hw/misc/bcm2838_thermal.h
@@ -0,0 +1,24 @@
+/*
+ * BCM2838 dummy thermal sensor
+ *
+ * Copyright (C) 2022 Maksim Kopusov <maksim.kopusov@auriga.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef BCM2838_THERMAL_H
+#define BCM2838_THERMAL_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_BCM2838_THERMAL "bcm2838-thermal"
+OBJECT_DECLARE_SIMPLE_TYPE(Bcm2838ThermalState, BCM2838_THERMAL)
+
+struct Bcm2838ThermalState {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+};
+
+#endif /* BCM2838_THERMAL_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 20/45] Implement BCM2838 thermal sensor
2023-12-08 2:31 ` [PATCH v4 20/45] Implement BCM2838 thermal sensor Sergey Kambalin
@ 2024-01-15 14:42 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:42 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:33, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_peripherals.c | 27 ++++++--
> hw/arm/raspi4b.c | 1 -
> hw/misc/bcm2838_thermal.c | 98 ++++++++++++++++++++++++++++
> hw/misc/meson.build | 3 +-
> include/hw/arm/bcm2838_peripherals.h | 2 +
> include/hw/misc/bcm2838_thermal.h | 24 +++++++
> 6 files changed, 147 insertions(+), 8 deletions(-)
> create mode 100644 hw/misc/bcm2838_thermal.c
> create mode 100644 include/hw/misc/bcm2838_thermal.h
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index 7c489c8e8a..e9c6d47ba6 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -37,6 +37,9 @@ static void bcm2838_peripherals_init(Object *obj)
> /* Random Number Generator */
> object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
>
> + /* Thermal */
> + object_initialize_child(obj, "thermal", &s->thermal, TYPE_BCM2838_THERMAL);
> +
> /* PCIe Host Bridge */
> object_initialize_child(obj, "pcie-host", &s->pcie_host,
> TYPE_BCM2838_PCIE_HOST);
> @@ -75,6 +78,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
> MemoryRegion *regs_mr;
> MemoryRegion *mmio_mr;
> + MemoryRegion *rng200_mr;
> + MemoryRegion *thermal_mr;
> + qemu_irq rng_200_irq;
>
> int n;
>
> @@ -92,12 +98,20 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
> return;
> }
> - memory_region_add_subregion(
> - &s_base->peri_mr, RNG_OFFSET,
> - sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
> - sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
> - qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
> - INTERRUPT_RNG));
> + rng200_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0);
> + memory_region_add_subregion(&s_base->peri_mr, RNG_OFFSET, rng200_mr);
> +
> + rng_200_irq = qdev_get_gpio_in_named(DEVICE(&s_base->ic),
> + BCM2835_IC_GPU_IRQ, INTERRUPT_RNG);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0, rng_200_irq);
These parts related to the RNG should presumably have been in
the patch which added the RNG device.
> +
> +
> + /* THERMAL */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->thermal), errp)) {
> + return;
> + }
> + thermal_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->thermal), 0);
> + memory_region_add_subregion( &s->peri_low_mr, 0x15D2000, thermal_mr);
>
> /* Extended Mass Media Controller 2 */
> object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
> @@ -198,6 +212,7 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
> BCM2838_MPHI_SIZE);
> memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
> &s->mphi_mr_alias);
> +
> /* PCIe Root Complex */
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_host), errp)) {
> return;
Stray extra whitespace change -- should probably be in whichever patch
is adding the PCI device to the SoC.
> diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
> index 7b5385b8dd..fda27d36cb 100644
> --- a/hw/arm/raspi4b.c
> +++ b/hw/arm/raspi4b.c
> @@ -67,7 +67,6 @@ static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
>
> /* Temporarily disable following devices until they are implemented*/
> const char *to_be_removed_from_dt_as_wa[] = {
> - "brcm,bcm2711-thermal",
> "brcm,bcm2711-genet-v5",
> };
>
> diff --git a/hw/misc/bcm2838_thermal.c b/hw/misc/bcm2838_thermal.c
> new file mode 100644
> index 0000000000..2301f657d0
> --- /dev/null
> +++ b/hw/misc/bcm2838_thermal.c
> @@ -0,0 +1,98 @@
> +/*
> + * BCM2838 dummy thermal sensor
> + *
> + * Copyright (C) 2022 Maksim Kopusov <maksim.kopusov@auriga.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "qapi/error.h"
> +#include "hw/misc/bcm2838_thermal.h"
> +#include "hw/registerfields.h"
> +#include "migration/vmstate.h"
> +#include "qemu/error-report.h"
> +
> +REG32(STAT, 0x200)
> +FIELD(STAT, DATA, 0, 10)
> +FIELD(STAT, VALID_1, 10, 1)
> +FIELD(STAT, VALID_2, 16, 1)
> +
> +#define BCM2838_THERMAL_SIZE 0xf00
> +
> +#define THERMAL_OFFSET_C 410040
> +#define THERMAL_COEFF (-487.0f)
> +#define MILLIDEGREE_COEFF 1000
> +
> +static uint16_t bcm2838_thermal_temp2adc(int temp_C)
> +{
> + return (temp_C * MILLIDEGREE_COEFF - THERMAL_OFFSET_C) / THERMAL_COEFF;
> +}
> +
> +static uint64_t bcm2838_thermal_read(void *opaque, hwaddr addr, unsigned size)
> +{
> + uint32_t val = 0;
> +
> + switch (addr) {
> + case A_STAT:
> + /* Temperature is always 25°C */
> + val = FIELD_DP32(val, STAT, DATA, bcm2838_thermal_temp2adc(25));
> + val = FIELD_DP32(val, STAT, VALID_1, 1);
> + val = FIELD_DP32(val, STAT, VALID_2, 1);
> +
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "%s can't access addr: 0x%"PRIx64,
addr here is a hwaddr, so HWADDR_PRIx is the right format string.
> + TYPE_BCM2838_THERMAL, addr);
> + }
> + return val;
> +}
> diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> index b899e6b596..386471a5e4 100644
> --- a/hw/misc/meson.build
> +++ b/hw/misc/meson.build
> @@ -91,7 +91,8 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files(
> 'bcm2835_thermal.c',
> 'bcm2835_cprman.c',
> 'bcm2835_powermgt.c',
> - 'bcm2838_rng200.c'
> + 'bcm2838_rng200.c',
> + 'bcm2838_thermal.c'
If you always keep a trailing comma at the end of this kind of list,
then when you add a new item to it you don't need to also edit
the previous line.
> ))
> system_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
> system_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 21/45] Add clock_isp stub
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (19 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 20/45] Implement BCM2838 thermal sensor Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:43 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 22/45] Add GENET stub Sergey Kambalin
` (25 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 6 ++++++
include/hw/arm/bcm2838_peripherals.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index e9c6d47ba6..65a659c15c 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -17,6 +17,9 @@
#define PCIE_MMIO_ARM_OFFSET 0x600000000
#define PCIE_MMIO_SIZE 0x40000000
+#define CLOCK_ISP_OFFSET 0xc11000
+#define CLOCK_ISP_SIZE 0x100
+
/* Lower peripheral base address on the VC (GPU) system bus */
#define BCM2838_VC_PERI_LOW_BASE 0x7c000000
@@ -228,6 +231,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(get_system_memory(), PCIE_MMIO_ARM_OFFSET,
&s->pcie_mmio_alias);
+ create_unimp(s_base, &s->clkisp, "bcm2835-clkisp", CLOCK_ISP_OFFSET,
+ CLOCK_ISP_SIZE);
+
/* GPIO */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
return;
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 0e8465ba34..20b7d1eb67 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -70,6 +70,7 @@ struct BCM2838PeripheralState {
BCM2838Rng200State rng200;
Bcm2838ThermalState thermal;
SDHCIState emmc2;
+ UnimplementedDeviceState clkisp;
BCM2838PcieHostState pcie_host;
BCM2838GpioState gpio;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 22/45] Add GENET stub
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (20 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 21/45] Add clock_isp stub Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 23/45] Add GENET register structs. Part 1 Sergey Kambalin
` (24 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2838_thermal.c | 2 +-
hw/net/bcm2838_genet.c | 99 ++++++++++++++++++++++++++++++++++
hw/net/meson.build | 2 +
hw/net/trace-events | 16 ++++++
include/hw/net/bcm2838_genet.h | 40 ++++++++++++++
5 files changed, 158 insertions(+), 1 deletion(-)
create mode 100644 hw/net/bcm2838_genet.c
create mode 100644 include/hw/net/bcm2838_genet.h
diff --git a/hw/misc/bcm2838_thermal.c b/hw/misc/bcm2838_thermal.c
index 2301f657d0..372962b9ba 100644
--- a/hw/misc/bcm2838_thermal.c
+++ b/hw/misc/bcm2838_thermal.c
@@ -80,7 +80,7 @@ static void bcm2838_thermal_class_init(ObjectClass *klass, void *data)
dc->realize = bcm2838_thermal_realize;
- /* This device has no state: no need for vmstate or reset */
+ /* This device has nothing to save: no need for vmstate or reset */
}
static const TypeInfo bcm2838_thermal_info = {
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
new file mode 100644
index 0000000000..4420486e00
--- /dev/null
+++ b/hw/net/bcm2838_genet.c
@@ -0,0 +1,99 @@
+/*
+ * BCM2838 Gigabit Ethernet emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/module.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "net/eth.h"
+#include "qapi/error.h"
+#include "hw/irq.h"
+#include "net/checksum.h"
+#include "sysemu/dma.h"
+#include "hw/net/bcm2838_genet.h"
+#include "trace.h"
+
+
+static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint64_t value = ~0;
+
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+
+ trace_bcm2838_genet_read(size, offset, value);
+ return value;
+}
+
+static void bcm2838_genet_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size) {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+}
+
+static const MemoryRegionOps bcm2838_genet_ops = {
+ .read = bcm2838_genet_read,
+ .write = bcm2838_genet_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = 4},
+ .valid = {.min_access_size = 4},
+};
+
+
+static void bcm2838_genet_realize(DeviceState *dev, Error **errp)
+{
+ BCM2838GenetState *s = BCM2838_GENET(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+ /* Controller registers */
+ memory_region_init_io(&s->regs_mr, OBJECT(s), &bcm2838_genet_ops, s,
+ "bcm2838_genet_regs", sizeof(s->regs));
+ sysbus_init_mmio(sbd, &s->regs_mr);
+}
+
+static void bcm2838_genet_phy_reset(BCM2838GenetState *s)
+{
+ trace_bcm2838_genet_phy_reset("done");
+}
+
+static void bcm2838_genet_reset(DeviceState *d)
+{
+ BCM2838GenetState *s = BCM2838_GENET(d);
+
+ memset(&s->regs, 0x00, sizeof(s->regs));
+
+ trace_bcm2838_genet_reset("done");
+
+ bcm2838_genet_phy_reset(s);
+}
+
+static void bcm2838_genet_class_init(ObjectClass *class, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(class);
+
+ dc->realize = bcm2838_genet_realize;
+ dc->reset = bcm2838_genet_reset;
+}
+
+static const TypeInfo bcm2838_genet_info = {
+ .name = TYPE_BCM2838_GENET,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2838GenetState),
+ .class_init = bcm2838_genet_class_init,
+};
+
+static void bcm2838_genet_register(void)
+{
+ type_register_static(&bcm2838_genet_info);
+}
+
+type_init(bcm2838_genet_register)
diff --git a/hw/net/meson.build b/hw/net/meson.build
index f64651c467..d513a8d029 100644
--- a/hw/net/meson.build
+++ b/hw/net/meson.build
@@ -72,4 +72,6 @@ system_ss.add(when: 'CONFIG_ROCKER', if_true: files(
system_ss.add(when: 'CONFIG_ALL', if_true: files('rocker/qmp-norocker.c'))
system_ss.add(files('rocker/rocker-hmp-cmds.c'))
+system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2838_genet.c'))
+
subdir('can')
diff --git a/hw/net/trace-events b/hw/net/trace-events
index 387e32e153..4081bd09d6 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -494,3 +494,19 @@ xen_netdev_connect(int dev, unsigned int tx, unsigned int rx, int port) "vif%u t
xen_netdev_frontend_changed(const char *dev, int state) "vif%s state %d"
xen_netdev_tx(int dev, int ref, int off, int len, unsigned int flags, const char *c, const char *d, const char *m, const char *e) "vif%u ref %u off %u len %u flags 0x%x%s%s%s%s"
xen_netdev_rx(int dev, int idx, int status, int flags) "vif%u idx %d status %d flags 0x%x"
+# bcm2838_genet.c
+bcm2838_genet_read(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04" PRIx64 ": 0x%016" PRIx64
+bcm2838_genet_write(unsigned int size, uint64_t offset, uint64_t value) "%u bytes @ 0x%04" PRIx64 ": 0x%016" PRIx64
+bcm2838_genet_can_receive(const char *state) "receive is %s"
+bcm2838_genet_receive(ssize_t bytes_received) "%zd bytes received"
+bcm2838_genet_phy_update_link(const char *link_state) "link is %s"
+bcm2838_genet_phy_reset(const char *status) "PHY reset %s"
+bcm2838_genet_reset(const char *status) "MAC reset %s"
+bcm2838_genet_mac_address(const char *info) "%s"
+bcm2838_genet_tx_dma(const char *dma_state) "TX DMA %s"
+bcm2838_genet_tx_dma_ring(uint32_t ring_en) "TX DMA enabled rings: 0x%05x"
+bcm2838_genet_tx_dma_ring_buf(uint32_t ring_buf_en) "TX DMA enabled ring buffers: 0x%05x"
+bcm2838_genet_tx_dma_ring_active(unsigned int ring, const char *ring_state) "ring %u is %s"
+bcm2838_genet_tx_request(unsigned int ring_idx, uint32_t prod_idx, uint32_t cons_idx) "ring %u, PROD_INDEX %u, CONS_INDEX %u"
+bcm2838_genet_tx(unsigned int ring_idx, uint64_t desc_idx, uint32_t desc_status, uint64_t data_addr) "ring %u, descriptor %" PRIu64 ": 0x%08x, data @ 0x%08" PRIx64
+bcm2838_genet_rx_dma_ring_active(unsigned int ring, const char *ring_state) "ring %u is %s"
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
new file mode 100644
index 0000000000..d166a5c24c
--- /dev/null
+++ b/include/hw/net/bcm2838_genet.h
@@ -0,0 +1,40 @@
+/*
+ * BCM2838 Gigabit Ethernet emulation
+ *
+ * Copyright (C) 2022 Ovchinnikov Vitalii <vitalii.ovchinnikov@auriga.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef BCM2838_GENET_H
+#define BCM2838_GENET_H
+
+#include "net/net.h"
+#include "hw/sysbus.h"
+
+#define TYPE_BCM2838_GENET "bcm2838-genet"
+OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
+
+#define BCM2838_GENET_REV_MAJOR 6
+#define BCM2838_GENET_REV_MINOR 0
+
+typedef struct {
+ uint8_t stub_area[0x10000]; /* temporary stub */
+} BCM2838GenetRegs;
+
+struct BCM2838GenetState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+
+ MemoryRegion regs_mr;
+ AddressSpace dma_as;
+
+ BCM2838GenetRegs regs;
+
+ qemu_irq irq_default;
+ qemu_irq irq_prio;
+};
+
+#endif /* BCM2838_GENET_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 23/45] Add GENET register structs. Part 1
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (21 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 22/45] Add GENET stub Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 24/45] Add GENET register structs. Part 2 Sergey Kambalin
` (23 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 37 ++++++++++++++++
include/hw/net/bcm2838_genet.h | 77 +++++++++++++++++++++++++++++++++-
2 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 4420486e00..0d98d1b30e 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -15,9 +15,46 @@
#include "hw/irq.h"
#include "net/checksum.h"
#include "sysemu/dma.h"
+#include "hw/registerfields.h"
#include "hw/net/bcm2838_genet.h"
#include "trace.h"
+REG32(GENET_SYS_REV_CTRL, 0)
+FIELD(GENET_SYS_REV_CTRL, GPHY_REV, 0, 16)
+FIELD(GENET_SYS_REV_CTRL, MINOR_REV, 16, 4)
+FIELD(GENET_SYS_REV_CTRL, RSVD_20_23, 20, 4)
+FIELD(GENET_SYS_REV_CTRL, MAJOR_REV, 24, 4)
+FIELD(GENET_SYS_REV_CTRL, RSVD_28_31, 28, 4)
+
+REG32(GENET_INTRL_0, 0)
+FIELD(GENET_INTRL_0, SCB, 0, 1)
+FIELD(GENET_INTRL_0, EPHY, 1, 1)
+FIELD(GENET_INTRL_0, PHY_DET_R, 2, 1)
+FIELD(GENET_INTRL_0, PHY_DET_F, 3, 1)
+FIELD(GENET_INTRL_0, LINK_UP, 4, 1)
+FIELD(GENET_INTRL_0, LINK_DOWN, 5, 1)
+FIELD(GENET_INTRL_0, UMAC, 6, 1)
+FIELD(GENET_INTRL_0, UMAC_TSV, 7, 1)
+FIELD(GENET_INTRL_0, TBUF_UNDERRUN, 8, 1)
+FIELD(GENET_INTRL_0, RBUF_OVERFLOW, 9, 1)
+FIELD(GENET_INTRL_0, HFB_SM, 10, 1)
+FIELD(GENET_INTRL_0, HFB_MM, 11, 1)
+FIELD(GENET_INTRL_0, MPD_R, 12, 1)
+FIELD(GENET_INTRL_0, RXDMA_MBDONE, 13, 1)
+FIELD(GENET_INTRL_0, RXDMA_PDONE, 14, 1)
+FIELD(GENET_INTRL_0, RXDMA_BDONE, 15, 1)
+FIELD(GENET_INTRL_0, TXDMA_MBDONE, 16, 1)
+FIELD(GENET_INTRL_0, TXDMA_PDONE, 17, 1)
+FIELD(GENET_INTRL_0, TXDMA_BDONE, 18, 1)
+FIELD(GENET_INTRL_0, RSVD_19_22, 19, 4)
+FIELD(GENET_INTRL_0, MDIO_DONE, 23, 1)
+FIELD(GENET_INTRL_0, MDIO_ERROR, 24, 1)
+FIELD(GENET_INTRL_0, RSVD_25_31, 25, 4)
+
+REG32(GENET_INTRL_1, 0)
+FIELD(GENET_INTRL_1, TX_INTRS, 0, 16)
+FIELD(GENET_INTRL_1, RX_INTRS, 16, 16)
+
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index d166a5c24c..f583818399 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -19,7 +19,82 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_REV_MINOR 0
typedef struct {
- uint8_t stub_area[0x10000]; /* temporary stub */
+ uint32_t rev_ctrl;
+ uint32_t port_ctrl;
+ uint32_t rbuf_flush_ctrl;
+ uint32_t tbuf_flush_ctrl;
+ uint32_t reserved_0x10[12];
+} BCM2838GenetRegsSys;
+
+typedef struct {
+ uint32_t reserved_0x0[16];
+} BCM2838GenetRegsGrBridge;
+
+typedef struct {
+ uint32_t pwr_mgmt;
+ uint32_t reserved_0x4[2];
+ uint32_t rgmii_oob_ctrl;
+ uint32_t reserved_0x10[3];
+ uint32_t gphy_ctrl;
+ uint32_t reserved_0x20[24];
+} BCM2838GenetRegsExt;
+
+typedef struct {
+ uint32_t stat;
+ uint32_t set;
+ uint32_t clear;
+ uint32_t mask_status;
+ uint32_t mask_set;
+ uint32_t mask_clear;
+ uint32_t reserved_0x18[10];
+} BCM2838GenetRegsIntrl0;
+
+typedef struct {
+ uint32_t stat;
+ uint32_t set;
+ uint32_t clear;
+ uint32_t mask_status;
+ uint32_t mask_set;
+ uint32_t mask_clear;
+ uint32_t reserved_0x18[10];
+} BCM2838GenetRegsIntrl1;
+
+typedef struct {
+ uint32_t ctrl;
+ uint32_t reserved_0x4[2];
+ uint32_t status;
+ uint32_t reserved_0x10;
+ uint32_t chk_ctrl;
+ uint32_t reserved_0x18[31];
+ uint32_t ovfl_cnt;
+ uint32_t err_cnt;
+ uint32_t energy_ctrl;
+ uint32_t reserved_0xA0[5];
+ uint32_t size_ctrl;
+ uint32_t reserved_0xB8[18];
+} BCM2838GenetRegsRbuf;
+
+typedef struct {
+ uint32_t ctrl;
+ uint32_t reserved_0x4[2];
+ uint32_t bp_mc;
+ uint32_t reserved_0x10;
+ uint32_t energy_ctrl;
+ uint32_t reserved_0x18[58];
+} BCM2838GenetRegsTbuf;
+
+typedef struct {
+ BCM2838GenetRegsSys sys;
+ BCM2838GenetRegsGrBridge gr_bridge;
+ BCM2838GenetRegsExt ext;
+ uint32_t reserved_0x100[64];
+ BCM2838GenetRegsIntrl0 intrl0;
+ BCM2838GenetRegsIntrl1 intrl1;
+ uint32_t reserved_0x280[32];
+ BCM2838GenetRegsRbuf rbuf;
+ uint32_t reserved_0x400[128];
+ BCM2838GenetRegsTbuf tbuf;
+ uint32_t reserved_0x700[64];
} BCM2838GenetRegs;
struct BCM2838GenetState {
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 24/45] Add GENET register structs. Part 2
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (22 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 23/45] Add GENET register structs. Part 1 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 25/45] Add GENET register structs. Part 3 Sergey Kambalin
` (22 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 89 ++++++++++++++++++++++++++++++++++
include/hw/net/bcm2838_genet.h | 89 ++++++++++++++++++++++++++++++++++
2 files changed, 178 insertions(+)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 0d98d1b30e..9a99f34c4a 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -19,6 +19,7 @@
#include "hw/net/bcm2838_genet.h"
#include "trace.h"
+/* GENET layouts */
REG32(GENET_SYS_REV_CTRL, 0)
FIELD(GENET_SYS_REV_CTRL, GPHY_REV, 0, 16)
FIELD(GENET_SYS_REV_CTRL, MINOR_REV, 16, 4)
@@ -55,6 +56,94 @@ REG32(GENET_INTRL_1, 0)
FIELD(GENET_INTRL_1, TX_INTRS, 0, 16)
FIELD(GENET_INTRL_1, RX_INTRS, 16, 16)
+REG32(GENET_UMAC_CMD, 0)
+FIELD(GENET_UMAC_CMD, TX_EN, 0, 1)
+FIELD(GENET_UMAC_CMD, RX_EN, 1, 1)
+FIELD(GENET_UMAC_CMD, SPEED, 2, 2)
+FIELD(GENET_UMAC_CMD, PROMISC, 4, 1)
+FIELD(GENET_UMAC_CMD, PAD_EN, 5, 1)
+FIELD(GENET_UMAC_CMD, CRC_FWD, 6, 1)
+FIELD(GENET_UMAC_CMD, PAUSE_FWD, 7, 1)
+FIELD(GENET_UMAC_CMD, RX_PAUSE_IGNORE, 8, 1)
+FIELD(GENET_UMAC_CMD, TX_ADDR_INS, 9, 1)
+FIELD(GENET_UMAC_CMD, HD_EN, 10, 1)
+FIELD(GENET_UMAC_CMD, SW_RESET_OLD, 11, 1)
+FIELD(GENET_UMAC_CMD, RSVD_12, 12, 1)
+FIELD(GENET_UMAC_CMD, SW_RESET, 13, 1)
+FIELD(GENET_UMAC_CMD, RSVD_14, 14, 1)
+FIELD(GENET_UMAC_CMD, LCL_LOOP_EN, 15, 1)
+FIELD(GENET_UMAC_CMD, RSVD_16_21, 16, 6)
+FIELD(GENET_UMAC_CMD, AUTO_CONFIG, 22, 1)
+FIELD(GENET_UMAC_CMD, CNTL_FRM_EN, 23, 1)
+FIELD(GENET_UMAC_CMD, NO_LEN_CHK, 24, 1)
+FIELD(GENET_UMAC_CMD, RMT_LOOP_EN, 25, 1)
+FIELD(GENET_UMAC_CMD, RX_ERR_DISC, 26, 1)
+FIELD(GENET_UMAC_CMD, PRBL_EN, 27, 1)
+FIELD(GENET_UMAC_CMD, TX_PAUSE_IGNORE, 28, 1)
+FIELD(GENET_UMAC_CMD, TX_RX_EN, 29, 1)
+FIELD(GENET_UMAC_CMD, RUNT_FILTER_DIS, 30, 1)
+FIELD(GENET_UMAC_CMD, RSVD_31, 31, 1)
+
+REG32(GENET_UMAC_MAC_0, 0)
+FIELD(GENET_UMAC_MAC_0, ADDR_3, 0, 8)
+FIELD(GENET_UMAC_MAC_0, ADDR_2, 8, 8)
+FIELD(GENET_UMAC_MAC_0, ADDR_1, 16, 8)
+FIELD(GENET_UMAC_MAC_0, ADDR_0, 24, 8)
+
+REG32(GENET_UMAC_MAC_1, 0)
+FIELD(GENET_UMAC_MAC_1, ADDR_5, 0, 8)
+FIELD(GENET_UMAC_MAC_1, ADDR_4, 8, 8)
+FIELD(GENET_UMAC_MAC_1, RSVD_16_31, 16, 8)
+
+REG32(GENET_UMAC_MDIO_CMD, 0)
+FIELD(GENET_UMAC_MDIO_CMD, REG_DATA, 0, 16)
+FIELD(GENET_UMAC_MDIO_CMD, REG_ID, 16, 5)
+FIELD(GENET_UMAC_MDIO_CMD, PHY_ID, 21, 5)
+FIELD(GENET_UMAC_MDIO_CMD, WR, 26, 1)
+FIELD(GENET_UMAC_MDIO_CMD, RD, 27, 1)
+FIELD(GENET_UMAC_MDIO_CMD, RD_FAIL, 28, 1)
+FIELD(GENET_UMAC_MDIO_CMD, START_BUSY, 29, 1)
+FIELD(GENET_UMAC_MDIO_CMD, RSVD_30_31, 30, 2)
+
+REG32(GENET_DMA_RING_CFG, 0)
+FIELD(GENET_DMA_RING_CFG, EN, 0, 17)
+FIELD(GENET_DMA_RING_CFG, RSVD_17_31, 17, 14)
+
+REG32(GENET_DMA_CTRL, 0)
+FIELD(GENET_DMA_CTRL, EN, 0, 1)
+FIELD(GENET_DMA_CTRL, RING_BUF_EN, 1, 17)
+FIELD(GENET_DMA_CTRL, RSVD_18_19, 18, 2)
+FIELD(GENET_DMA_CTRL, TSB_SWAP_EN, 20, 1)
+FIELD(GENET_DMA_CTRL, RSVD_21_31, 21, 11)
+
+REG32(GENET_DMA_PROD_INDEX, 0)
+FIELD(GENET_DMA_PROD_INDEX, INDEX, 0, 16)
+FIELD(GENET_DMA_PROD_INDEX, DISCARD_CNT, 16, 16)
+
+REG32(GENET_DMA_CONS_INDEX, 0)
+FIELD(GENET_DMA_CONS_INDEX, INDEX, 0, 16)
+FIELD(GENET_DMA_CONS_INDEX, RSVD_16_31, 16, 16)
+
+REG32(GENET_DMA_STATUS, 0)
+FIELD(GENET_DMA_STATUS, DISABLED, 0, 1)
+FIELD(GENET_DMA_STATUS, DESC_RAM_INIT_BUSY, 1, 1)
+FIELD(GENET_DMA_STATUS, RSVD_2_31, 2, 30)
+
+REG32(GENET_RDMA_LENGTH_STATUS, 0)
+FIELD(GENET_RDMA_LENGTH_STATUS, OVERRUN, 0, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, CRC_ERROR, 1, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, RXERR, 2, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, NO, 3, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, LG, 4, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, MULTICAST, 5, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, BROADCAST, 6, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, RSVD_7_11, 7, 5)
+FIELD(GENET_RDMA_LENGTH_STATUS, WRAP, 12, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, SOP, 13, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, EOP, 14, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, OWN, 15, 1)
+FIELD(GENET_RDMA_LENGTH_STATUS, BUFLENGTH, 16, 12)
+FIELD(GENET_RDMA_LENGTH_STATUS, RSVD_28_31, 29, 4)
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index f583818399..736b4d1757 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -18,6 +18,10 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_REV_MAJOR 6
#define BCM2838_GENET_REV_MINOR 0
+#define BCM2838_GENET_DMA_DESC_CNT 256
+#define BCM2838_GENET_DMA_RING_CNT 17
+#define BCM2838_GENET_DMA_RING_DEFAULT (BCM2838_GENET_DMA_RING_CNT - 1)
+
typedef struct {
uint32_t rev_ctrl;
uint32_t port_ctrl;
@@ -83,6 +87,88 @@ typedef struct {
uint32_t reserved_0x18[58];
} BCM2838GenetRegsTbuf;
+typedef struct {
+ uint32_t reserved_0x0;
+ uint32_t hd_bkp_ctrl;
+ uint32_t cmd;
+ uint32_t mac0;
+ uint32_t mac1;
+ uint32_t max_frame_len;
+ uint32_t pause_quanta;
+ uint32_t reserved_0x1C[10];
+ uint32_t mode;
+ uint32_t frm_tag0;
+ uint32_t frm_tag1;
+ uint32_t reserved_0x50[3];
+ uint32_t tx_ipg_len;
+ uint32_t reserved_0x60;
+ uint32_t eee_ctrl;
+ uint32_t eee_lpi_timer;
+ uint32_t eee_wake_timer;
+ uint32_t eee_ref_count;
+ uint32_t reserved_0x74;
+ uint32_t rx_ipg_inv;
+ uint32_t reserved_0x7C[165];
+ uint32_t macsec_prog_tx_crc;
+ uint32_t macsec_ctrl;
+ uint32_t reserved_0x318[6];
+ uint32_t pause_ctrl;
+ uint32_t tx_flush;
+ uint32_t rx_fifo_status;
+ uint32_t tx_fifo_status;
+ uint32_t reserved_0x340[48];
+ uint32_t mib[96];
+ uint32_t mib_ctrl;
+ uint32_t reserved_0x584[36];
+ uint32_t mdio_cmd;
+ uint32_t reserved_0x618[2];
+ uint32_t mpd_ctrl;
+ uint32_t mpd_pw_ms;
+ uint32_t mpd_pw_ls;
+ uint32_t reserved_0x62C[3];
+ uint32_t mdf_err_cnt;
+ uint32_t reserved_0x63C[5];
+ uint32_t mdf_ctrl;
+ uint32_t mdf_addr;
+ uint32_t reserved_0x658[106];
+} BCM2838GenetRegsUmac;
+
+typedef struct {
+ uint32_t length_status;
+ uint32_t address_lo;
+ uint32_t address_hi;
+} BCM2838GenetRdmaDesc;
+
+typedef struct {
+ uint32_t write_ptr;
+ uint32_t write_ptr_hi;
+ uint32_t prod_index;
+ uint32_t cons_index;
+ uint32_t ring_buf_size;
+ uint32_t start_addr;
+ uint32_t start_addr_hi;
+ uint32_t end_addr;
+ uint32_t end_addr_hi;
+ uint32_t mbuf_done_tresh;
+ uint32_t xon_xoff_tresh;
+ uint32_t read_ptr;
+ uint32_t read_ptr_hi;
+ uint32_t reserved_0x34[3];
+} BCM2838GenetRdmaRing;
+
+typedef struct {
+ BCM2838GenetRdmaDesc descs[BCM2838_GENET_DMA_DESC_CNT];
+ BCM2838GenetRdmaRing rings[BCM2838_GENET_DMA_RING_CNT];
+ uint32_t ring_cfg;
+ uint32_t ctrl;
+ uint32_t status;
+ uint32_t scb_burst_size;
+ uint32_t reserved_0x1050[7];
+ uint32_t ring_timeout[17];
+ uint32_t index2ring[8];
+ uint32_t reserved_0x10D0[972];
+} BCM2838GenetRegsRdma;
+
typedef struct {
BCM2838GenetRegsSys sys;
BCM2838GenetRegsGrBridge gr_bridge;
@@ -95,6 +181,9 @@ typedef struct {
uint32_t reserved_0x400[128];
BCM2838GenetRegsTbuf tbuf;
uint32_t reserved_0x700[64];
+ BCM2838GenetRegsUmac umac;
+ uint32_t reserved_0x1000[1024];
+ BCM2838GenetRegsRdma rdma;
} BCM2838GenetRegs;
struct BCM2838GenetState {
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 25/45] Add GENET register structs. Part 3
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (23 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 24/45] Add GENET register structs. Part 2 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 26/45] Add GENET register structs. Part 4 Sergey Kambalin
` (21 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 88 ++++++++++++++++++++++++++++++++++
include/hw/net/bcm2838_genet.h | 88 ++++++++++++++++++++++++++++++++++
2 files changed, 176 insertions(+)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 9a99f34c4a..be899b68f8 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -145,6 +145,94 @@ FIELD(GENET_RDMA_LENGTH_STATUS, OWN, 15, 1)
FIELD(GENET_RDMA_LENGTH_STATUS, BUFLENGTH, 16, 12)
FIELD(GENET_RDMA_LENGTH_STATUS, RSVD_28_31, 29, 4)
+REG32(GENET_TDMA_LENGTH_STATUS, 0)
+FIELD(GENET_TDMA_LENGTH_STATUS, RSVD_0_3, 0, 4)
+FIELD(GENET_TDMA_LENGTH_STATUS, DO_CSUM, 4, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, OW_CRC, 5, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, APPEND_CRC, 6, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, RSVD_7_8, 7, 2)
+FIELD(GENET_TDMA_LENGTH_STATUS, UNDERRUN, 9, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, RSVD_10_11, 10, 2)
+FIELD(GENET_TDMA_LENGTH_STATUS, WRAP, 12, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, SOP, 13, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, EOP, 14, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, OWN, 15, 1)
+FIELD(GENET_TDMA_LENGTH_STATUS, BUFLENGTH, 16, 12)
+FIELD(GENET_TDMA_LENGTH_STATUS, RSVD_28_31, 29, 4)
+
+REG16(GENET_PHY_BMCR, 0)
+FIELD(GENET_PHY_BMCR, RSVD_0_5, 0, 6)
+FIELD(GENET_PHY_BMCR, SPEED1000, 6, 1)
+FIELD(GENET_PHY_BMCR, CTST, 7, 1)
+FIELD(GENET_PHY_BMCR, FULLDPLX, 8, 1)
+FIELD(GENET_PHY_BMCR, ANRESTART, 9, 1)
+FIELD(GENET_PHY_BMCR, ISOLATE, 10, 1)
+FIELD(GENET_PHY_BMCR, PDOWN, 11, 1)
+FIELD(GENET_PHY_BMCR, AENABLE, 12, 1)
+FIELD(GENET_PHY_BMCR, SPEED100, 13, 1)
+FIELD(GENET_PHY_BMCR, LOOPBACK, 14, 1)
+FIELD(GENET_PHY_BMCR, RESET, 15, 1)
+
+REG16(GENET_PHY_BMSR, 0)
+FIELD(GENET_PHY_BMSR, ERCAP, 0, 1)
+FIELD(GENET_PHY_BMSR, JCD, 1, 1)
+FIELD(GENET_PHY_BMSR, LSTATUS, 2, 1)
+FIELD(GENET_PHY_BMSR, ANEGCAPABLE, 3, 1)
+FIELD(GENET_PHY_BMSR, RFAULT, 4, 1)
+FIELD(GENET_PHY_BMSR, ANEGCOMPLETE, 5, 1)
+FIELD(GENET_PHY_BMSR, RSVD_6_7, 6, 2)
+FIELD(GENET_PHY_BMSR, ESTATEN, 8, 1)
+FIELD(GENET_PHY_BMSR, _100HALF2, 9, 1)
+FIELD(GENET_PHY_BMSR, _100FULL2, 10, 1)
+FIELD(GENET_PHY_BMSR, _10HALF, 11, 1)
+FIELD(GENET_PHY_BMSR, _10FULL, 12, 1)
+FIELD(GENET_PHY_BMSR, _100HALF, 13, 1)
+FIELD(GENET_PHY_BMSR, _100FULL, 14, 1)
+FIELD(GENET_PHY_BMSR, _10BASE4, 15, 1)
+
+REG16(GENET_PHY_LPA, 0)
+FIELD(GENET_PHY_LPA, SLCT, 0, 5)
+FIELD(GENET_PHY_LPA, _10HALF_1000XFULL, 5, 1)
+FIELD(GENET_PHY_LPA, _10FULL_1000XHALF, 6, 1)
+FIELD(GENET_PHY_LPA, _100HALF_1000XPAUSE, 7, 1)
+FIELD(GENET_PHY_LPA, _100FULL_1000XPAUSE_ASYM, 8, 1)
+FIELD(GENET_PHY_LPA, _100BASE4, 9, 1)
+FIELD(GENET_PHY_LPA, PAUSE_CAP, 10, 1)
+FIELD(GENET_PHY_LPA, PAUSE_ASYM, 11, 1)
+FIELD(GENET_PHY_LPA, RSVD_12, 12, 1)
+FIELD(GENET_PHY_LPA, RFAULT, 13, 1)
+FIELD(GENET_PHY_LPA, LPACK, 14, 1)
+FIELD(GENET_PHY_LPA, NPAGE, 15, 1)
+
+REG16(GENET_PHY_STAT_1000, 0)
+FIELD(GENET_PHY_STAT_1000, RSVD_0_9, 0, 10)
+FIELD(GENET_PHY_STAT_1000, HALF, 10, 1)
+FIELD(GENET_PHY_STAT_1000, FULL, 11, 1)
+FIELD(GENET_PHY_STAT_1000, REMRXOK, 12, 1)
+FIELD(GENET_PHY_STAT_1000, LOCALRXOK, 13, 1)
+FIELD(GENET_PHY_STAT_1000, MSRES, 14, 1)
+FIELD(GENET_PHY_STAT_1000, MSFAIL, 15, 1)
+
+REG16(GENET_PHY_AUX_CTRL_0, 0)
+FIELD(GENET_PHY_AUX_CTRL_0, REG_ID_MASK, 0, 3)
+FIELD(GENET_PHY_AUX_CTRL_0, RSVD_3, 3, 1)
+FIELD(GENET_PHY_AUX_CTRL_0, REG_DATA, 4, 8)
+FIELD(GENET_PHY_AUX_CTRL_0, REG_ID, 12, 3)
+FIELD(GENET_PHY_AUX_CTRL_0, MISC_WREN, 15, 1)
+
+REG16(GENET_PHY_AUX_CTRL_1, 0)
+FIELD(GENET_PHY_AUX_CTRL_1, RSVD_0_3, 0, 4)
+FIELD(GENET_PHY_AUX_CTRL_1, REG_DATA, 4, 12)
+
+REG16(GENET_PHY_SHADOW, 0)
+FIELD(GENET_PHY_SHADOW, REG_DATA, 0, 10)
+FIELD(GENET_PHY_SHADOW, REG_ID, 10, 5)
+FIELD(GENET_PHY_SHADOW, WR, 15, 1)
+
+REG16(GENET_PHY_EXP_SEL, 0)
+FIELD(GENET_PHY_EXP_SEL, REG_ID, 0, 8)
+FIELD(GENET_PHY_EXP_SEL, BLOCK_ID, 8, 8)
+
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
uint64_t value = ~0;
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index 736b4d1757..1bd004785a 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -22,6 +22,9 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_DMA_RING_CNT 17
#define BCM2838_GENET_DMA_RING_DEFAULT (BCM2838_GENET_DMA_RING_CNT - 1)
+#define BCM2838_GENET_HFB_FILTER_CNT 48
+#define BCM2838_GENET_HFB_FILTER_SIZE 128
+
typedef struct {
uint32_t rev_ctrl;
uint32_t port_ctrl;
@@ -169,6 +172,53 @@ typedef struct {
uint32_t reserved_0x10D0[972];
} BCM2838GenetRegsRdma;
+typedef struct {
+ uint32_t length_status;
+ uint32_t address_lo;
+ uint32_t address_hi;
+} BCM2838GenetTdmaDesc;
+
+typedef struct {
+ uint32_t read_ptr;
+ uint32_t read_ptr_hi;
+ uint32_t cons_index;
+ uint32_t prod_index;
+ uint32_t ring_buf_size;
+ uint32_t start_addr;
+ uint32_t start_addr_hi;
+ uint32_t end_addr;
+ uint32_t end_addr_hi;
+ uint32_t mbuf_done_tresh;
+ uint32_t flow_period;
+ uint32_t write_ptr;
+ uint32_t write_ptr_hi;
+ uint32_t reserved_0x34[3];
+} BCM2838GenetTdmaRing;
+
+typedef struct {
+ BCM2838GenetTdmaDesc descs[BCM2838_GENET_DMA_DESC_CNT];
+ BCM2838GenetTdmaRing rings[BCM2838_GENET_DMA_RING_CNT];
+ uint32_t ring_cfg;
+ uint32_t ctrl;
+ uint32_t status;
+ uint32_t scb_burst_size;
+ uint32_t reserved_0x1050[7];
+ uint32_t arb_ctrl;
+ uint32_t priority[3];
+ uint32_t reserved_0x10D0[993];
+} BCM2838GenetRegsTdma;
+
+typedef struct {
+ uint8_t flt[BCM2838_GENET_HFB_FILTER_CNT * BCM2838_GENET_HFB_FILTER_SIZE
+ * sizeof(uint32_t)];
+ uint32_t reserved_0x6000[1792];
+ uint32_t ctrl;
+ uint32_t flt_enable[2];
+ uint32_t reserved_0x7C0C[4];
+ uint32_t flt_len[BCM2838_GENET_HFB_FILTER_CNT / sizeof(uint32_t)];
+ uint32_t reserved_0x7C4C[237];
+} BCM2838GenetRegsHfb;
+
typedef struct {
BCM2838GenetRegsSys sys;
BCM2838GenetRegsGrBridge gr_bridge;
@@ -184,8 +234,45 @@ typedef struct {
BCM2838GenetRegsUmac umac;
uint32_t reserved_0x1000[1024];
BCM2838GenetRegsRdma rdma;
+ BCM2838GenetRegsTdma tdma;
+ uint32_t reserved_0x6000[2048];
+ BCM2838GenetRegsHfb hfb;
} BCM2838GenetRegs;
+typedef struct {
+ uint16_t bmcr;
+ uint16_t bmsr;
+ uint16_t sid1;
+ uint16_t sid2;
+ uint16_t advertise;
+ uint16_t lpa;
+ uint16_t expansion;
+ uint16_t next_page;
+ uint16_t lpa_next_page;
+ uint16_t ctrl1000;
+ uint16_t stat1000;
+ uint16_t reserved_11_12[2];
+ uint16_t mmd_ctrl;
+ uint16_t mmd_data;
+ uint16_t estatus;
+ uint16_t ecr;
+ uint16_t esr;
+ uint16_t dcounter;
+ uint16_t fcscounter;
+ uint16_t nwaytest;
+ uint16_t exp_data;
+ uint16_t srevision;
+ uint16_t exp_ctrl;
+ uint16_t aux_ctl;
+ uint16_t phyaddr;
+ uint16_t isr;
+ uint16_t imr;
+ uint16_t shd;
+ uint16_t reserved_29;
+ uint16_t rdb_addr;
+ uint16_t rdb_data;
+} BCM2838GenetPhyRegs;
+
struct BCM2838GenetState {
/*< private >*/
SysBusDevice parent_obj;
@@ -196,6 +283,7 @@ struct BCM2838GenetState {
AddressSpace dma_as;
BCM2838GenetRegs regs;
+ BCM2838GenetPhyRegs phy_regs;
qemu_irq irq_default;
qemu_irq irq_prio;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 26/45] Add GENET register structs. Part 4
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (24 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 25/45] Add GENET register structs. Part 3 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 27/45] Add GENET register access macros Sergey Kambalin
` (20 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
include/hw/net/bcm2838_genet.h | 37 ++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index 1bd004785a..94c2f3ebca 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -25,6 +25,12 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_HFB_FILTER_CNT 48
#define BCM2838_GENET_HFB_FILTER_SIZE 128
+#define BCM2838_GENET_PHY_AUX_CTL_MISC 0x7
+#define BCM2838_GENET_PHY_AUX_CTL_REGS_SIZE 8
+
+#define BCM2838_GENET_PHY_EXP_SHD_BLOCKS_CNT 256
+#define BCM2838_GENET_PHY_EXP_SHD_REGS_CNT 256
+
typedef struct {
uint32_t rev_ctrl;
uint32_t port_ctrl;
@@ -273,6 +279,34 @@ typedef struct {
uint16_t rdb_data;
} BCM2838GenetPhyRegs;
+typedef struct {
+ uint16_t reserved_0_2[3];
+ uint16_t clk_ctl;
+ uint16_t scr2;
+ uint16_t scr3;
+ uint16_t reserved_6_9[4];
+ uint16_t apd;
+ uint16_t rgmii_mode;
+ uint16_t reserved_12;
+ uint16_t leds1;
+ uint16_t reserved_14_18[5];
+ uint16_t _100fx_ctrl;
+ uint16_t ssd;
+ uint16_t reserved_21_30[10];
+ uint16_t mode;
+} BCM2838GenetPhyShdRegs;
+
+typedef struct {
+ uint16_t auxctl;
+ uint16_t reserved_1_6[BCM2838_GENET_PHY_AUX_CTL_REGS_SIZE - 2];
+ uint16_t misc;
+} BCM2838GenetPhyAuxShdRegs;
+
+typedef struct {
+ uint16_t regs[BCM2838_GENET_PHY_EXP_SHD_BLOCKS_CNT]
+ [BCM2838_GENET_PHY_EXP_SHD_REGS_CNT];
+} BCM2838GenetPhyExpShdRegs;
+
struct BCM2838GenetState {
/*< private >*/
SysBusDevice parent_obj;
@@ -284,6 +318,9 @@ struct BCM2838GenetState {
BCM2838GenetRegs regs;
BCM2838GenetPhyRegs phy_regs;
+ BCM2838GenetPhyShdRegs phy_shd_regs;
+ BCM2838GenetPhyAuxShdRegs phy_aux_ctl_shd_regs;
+ BCM2838GenetPhyExpShdRegs phy_exp_shd_regs;
qemu_irq irq_default;
qemu_irq irq_prio;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 27/45] Add GENET register access macros
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (25 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 26/45] Add GENET register structs. Part 4 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 28/45] Implement GENET register ops Sergey Kambalin
` (19 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
include/hw/net/bcm2838_genet.h | 76 ++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index 94c2f3ebca..e7a76cda81 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -22,9 +22,85 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_DMA_RING_CNT 17
#define BCM2838_GENET_DMA_RING_DEFAULT (BCM2838_GENET_DMA_RING_CNT - 1)
+#define BCM2838_GENET_HFB_FILTER_REGS offsetof(BCM2838GenetRegs, hfb)
+#define BCM2838_GENET_HFB_FILTER_REG(reg) (BCM2838_GENET_HFB_FILTER_REGS \
+ + offsetof(BCM2838GenetRegsHfb, reg))
#define BCM2838_GENET_HFB_FILTER_CNT 48
#define BCM2838_GENET_HFB_FILTER_SIZE 128
+#define BCM2838_GENET_INTRL0_REG(reg) (offsetof(BCM2838GenetRegs, intrl0) \
+ + offsetof(BCM2838GenetRegsIntrl0, reg))
+#define BCM2838_GENET_INTRL0_SET BCM2838_GENET_INTRL0_REG(set)
+#define BCM2838_GENET_INTRL0_CLEAR BCM2838_GENET_INTRL0_REG(clear)
+#define BCM2838_GENET_INTRL0_MASK_SET BCM2838_GENET_INTRL0_REG(mask_set)
+#define BCM2838_GENET_INTRL0_MASK_CLEAR BCM2838_GENET_INTRL0_REG(mask_clear)
+
+#define BCM2838_GENET_INTRL1_REG(reg) (offsetof(BCM2838GenetRegs, intrl1) \
+ + offsetof(BCM2838GenetRegsIntrl1, reg))
+#define BCM2838_GENET_INTRL1_SET BCM2838_GENET_INTRL1_REG(set)
+#define BCM2838_GENET_INTRL1_CLEAR BCM2838_GENET_INTRL1_REG(clear)
+#define BCM2838_GENET_INTRL1_MASK_SET BCM2838_GENET_INTRL1_REG(mask_set)
+#define BCM2838_GENET_INTRL1_MASK_CLEAR BCM2838_GENET_INTRL1_REG(mask_clear)
+
+#define BCM2838_GENET_UMAC_REG(reg) (offsetof(BCM2838GenetRegs, umac) \
+ + offsetof(BCM2838GenetRegsUmac, reg))
+#define BCM2838_GENET_UMAC_CMD BCM2838_GENET_UMAC_REG(cmd)
+#define BCM2838_GENET_UMAC_MAC0 BCM2838_GENET_UMAC_REG(mac0)
+#define BCM2838_GENET_UMAC_MAC1 BCM2838_GENET_UMAC_REG(mac1)
+#define BCM2838_GENET_UMAC_MDIO_CMD BCM2838_GENET_UMAC_REG(mdio_cmd)
+
+#define BCM2838_GENET_TDMA_REGS offsetof(BCM2838GenetRegs, tdma)
+#define BCM2838_GENET_TDMA_REG(reg) (BCM2838_GENET_TDMA_REGS \
+ + offsetof(BCM2838GenetRegsTdma, reg))
+#define BCM2838_GENET_TDMA_RINGS BCM2838_GENET_TDMA_REG(rings)
+#define BCM2838_GENET_TDMA_RING_CFG BCM2838_GENET_TDMA_REG(ring_cfg)
+#define BCM2838_GENET_TDMA_CTRL BCM2838_GENET_TDMA_REG(ctrl)
+
+#define BCM2838_GENET_RDMA_REGS offsetof(BCM2838GenetRegs, rdma)
+#define BCM2838_GENET_RDMA_REG(reg) (BCM2838_GENET_RDMA_REGS \
+ + offsetof(BCM2838GenetRegsRdma, reg))
+#define BCM2838_GENET_RDMA_RINGS BCM2838_GENET_RDMA_REG(rings)
+#define BCM2838_GENET_RDMA_RING_CFG BCM2838_GENET_RDMA_REG(ring_cfg)
+#define BCM2838_GENET_RDMA_CTRL BCM2838_GENET_RDMA_REG(ctrl)
+
+#define BCM2838_GENET_TRING_REG(reg) offsetof(BCM2838GenetTdmaRing, reg)
+#define BCM2838_GENET_TRING_WRITE_PTR BCM2838_GENET_TRING_REG(write_ptr)
+#define BCM2838_GENET_TRING_WRITE_PTR_HI BCM2838_GENET_TRING_REG(write_ptr_hi)
+#define BCM2838_GENET_TRING_PROD_INDEX BCM2838_GENET_TRING_REG(prod_index)
+#define BCM2838_GENET_TRING_CONS_INDEX BCM2838_GENET_TRING_REG(cons_index)
+#define BCM2838_GENET_TRING_RING_BUF_SIZE BCM2838_GENET_TRING_REG(ring_buf_size)
+#define BCM2838_GENET_TRING_RING_START_ADDR BCM2838_GENET_TRING_REG(start_addr)
+#define BCM2838_GENET_TRING_RING_START_ADDR_HI BCM2838_GENET_TRING_REG(start_addr_hi)
+#define BCM2838_GENET_TRING_RING_END_ADDR BCM2838_GENET_TRING_REG(end_addr)
+#define BCM2838_GENET_TRING_RING_END_ADDR_HI BCM2838_GENET_TRING_REG(end_addr_hi)
+#define BCM2838_GENET_TRING_RING_MBUF_DONE_TRESH BCM2838_GENET_TRING_REG(mbuf_done_tresh)
+#define BCM2838_GENET_TRING_RING_FLOW_PERIOD BCM2838_GENET_TRING_REG(flow_period)
+#define BCM2838_GENET_TRING_RING_READ_PTR BCM2838_GENET_TRING_REG(read_ptr)
+#define BCM2838_GENET_TRING_RING_READ_PTR_HI BCM2838_GENET_TRING_REG(read_ptr_hi)
+
+#define BCM2838_GENET_RRING_REG(reg) offsetof(BCM2838GenetRdmaRing, reg)
+#define BCM2838_GENET_RRING_WRITE_PTR BCM2838_GENET_RRING_REG(write_ptr)
+#define BCM2838_GENET_RRING_WRITE_PTR_HI BCM2838_GENET_RRING_REG(write_ptr_hi)
+#define BCM2838_GENET_RRING_PROD_INDEX BCM2838_GENET_RRING_REG(prod_index)
+#define BCM2838_GENET_RRING_CONS_INDEX BCM2838_GENET_RRING_REG(cons_index)
+#define BCM2838_GENET_RRING_RING_BUF_SIZE BCM2838_GENET_RRING_REG(ring_buf_size)
+#define BCM2838_GENET_RRING_RING_START_ADDR BCM2838_GENET_RRING_REG(start_addr)
+#define BCM2838_GENET_RRING_RING_START_ADDR_HI BCM2838_GENET_RRING_REG(start_addr_hi)
+#define BCM2838_GENET_RRING_RING_END_ADDR BCM2838_GENET_RRING_REG(end_addr)
+#define BCM2838_GENET_RRING_RING_END_ADDR_HI BCM2838_GENET_RRING_REG(end_addr_hi)
+#define BCM2838_GENET_RRING_RING_MBUF_DONE_TRESH BCM2838_GENET_RRING_REG(mbuf_done_tresh)
+#define BCM2838_GENET_RRING_RING_XON_XOFF_TRESH BCM2838_GENET_RRING_REG(xon_xoff_tresh)
+#define BCM2838_GENET_RRING_RING_READ_PTR BCM2838_GENET_RRING_REG(read_ptr)
+#define BCM2838_GENET_RRING_RING_READ_PTR_HI BCM2838_GENET_RRING_REG(read_ptr_hi)
+
+
+#define BCM2838_GENET_PHY_REG(reg) (offsetof(BCM2838GenetPhyRegs, reg) / 2)
+#define BCM2838_GENET_PHY_BMCR BCM2838_GENET_PHY_REG(bmcr)
+#define BCM2838_GENET_PHY_AUX_CTL BCM2838_GENET_PHY_REG(aux_ctl)
+#define BCM2838_GENET_PHY_SHD BCM2838_GENET_PHY_REG(shd)
+#define BCM2838_GENET_EXP_DATA BCM2838_GENET_PHY_REG(exp_data)
+#define BCM2838_GENET_EXP_SEL BCM2838_GENET_PHY_REG(exp_ctrl)
+
#define BCM2838_GENET_PHY_AUX_CTL_MISC 0x7
#define BCM2838_GENET_PHY_AUX_CTL_REGS_SIZE 8
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 28/45] Implement GENET register ops
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (26 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 27/45] Add GENET register access macros Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 29/45] Implement GENET MDIO Sergey Kambalin
` (18 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 189 +++++++++++++++++++++++++++++++--
include/hw/net/bcm2838_genet.h | 2 +
2 files changed, 182 insertions(+), 9 deletions(-)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index be899b68f8..56ff6a6f39 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -233,25 +233,144 @@ REG16(GENET_PHY_EXP_SEL, 0)
FIELD(GENET_PHY_EXP_SEL, REG_ID, 0, 8)
FIELD(GENET_PHY_EXP_SEL, BLOCK_ID, 8, 8)
+static void bcm2838_genet_set_qemu_mac(BCM2838GenetState *s)
+{
+ const MACAddr *addr = &s->nic_conf.macaddr;
+
+ s->regs.umac.mac0 = FIELD_DP32(s->regs.umac.mac0, GENET_UMAC_MAC_0,
+ ADDR_0, addr->a[0]);
+ s->regs.umac.mac0 = FIELD_DP32(s->regs.umac.mac0, GENET_UMAC_MAC_0,
+ ADDR_1, addr->a[1]);
+ s->regs.umac.mac0 = FIELD_DP32(s->regs.umac.mac0, GENET_UMAC_MAC_0,
+ ADDR_2, addr->a[2]);
+ s->regs.umac.mac0 = FIELD_DP32(s->regs.umac.mac0, GENET_UMAC_MAC_0,
+ ADDR_3, addr->a[3]);
+ s->regs.umac.mac1 = FIELD_DP32(s->regs.umac.mac1, GENET_UMAC_MAC_1,
+ ADDR_4, addr->a[4]);
+ s->regs.umac.mac1 = FIELD_DP32(s->regs.umac.mac1, GENET_UMAC_MAC_1,
+ ADDR_5, addr->a[5]);
+}
+
+static void bcm2838_genet_set_irq_default(BCM2838GenetState *s)
+{
+ uint32_t intrl_0_status = s->regs.intrl0.stat;
+ uint32_t intrl_0_mask = s->regs.intrl0.mask_status;
+ int level = (intrl_0_status & ~intrl_0_mask) == 0 ? 0 : 1;
+
+ qemu_set_irq(s->irq_default, level);
+}
+
+static void bcm2838_genet_set_irq_prio(BCM2838GenetState *s)
+{
+ uint32_t intrl_1_status = s->regs.intrl1.stat;
+ uint32_t intrl_1_mask = s->regs.intrl1.mask_status;
+ int level = (intrl_1_status & ~intrl_1_mask) == 0 ? 0 : 1;
+
+ qemu_set_irq(s->irq_prio, level);
+}
+
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
uint64_t value = ~0;
+ BCM2838GenetState *s = opaque;
- qemu_log_mask(
- LOG_GUEST_ERROR,
- "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
- __func__, size, offset);
+ if (offset + size < sizeof(s->regs)) {
+ memcpy(&value, (uint8_t *)&s->regs + offset, size);
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
trace_bcm2838_genet_read(size, offset, value);
return value;
}
static void bcm2838_genet_write(void *opaque, hwaddr offset, uint64_t value,
- unsigned size) {
- qemu_log_mask(
- LOG_GUEST_ERROR,
- "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
- __func__, size, offset);
+ unsigned size)
+{
+ BCM2838GenetState *s = opaque;
+ MACAddr *mac = &s->nic_conf.macaddr;
+ NetClientState *ncs = qemu_get_queue(s->nic);
+
+ trace_bcm2838_genet_write(size, offset, value);
+
+ if (offset + size < sizeof(s->regs)) {
+ switch (offset) {
+ case BCM2838_GENET_INTRL0_SET:
+ s->regs.intrl0.stat |= value;
+ break;
+ case BCM2838_GENET_INTRL0_CLEAR:
+ s->regs.intrl0.stat &= ~value;
+ break;
+ case BCM2838_GENET_INTRL0_MASK_SET:
+ s->regs.intrl0.mask_status |= value;
+ break;
+ case BCM2838_GENET_INTRL0_MASK_CLEAR:
+ s->regs.intrl0.mask_status &= ~value;
+ break;
+ case BCM2838_GENET_INTRL1_SET:
+ s->regs.intrl1.stat |= value;
+ break;
+ case BCM2838_GENET_INTRL1_CLEAR:
+ s->regs.intrl1.stat &= ~value;
+ break;
+ case BCM2838_GENET_INTRL1_MASK_SET:
+ s->regs.intrl1.mask_status |= value;
+ break;
+ case BCM2838_GENET_INTRL1_MASK_CLEAR:
+ s->regs.intrl1.mask_status &= ~value;
+ break;
+ case BCM2838_GENET_UMAC_CMD:
+ /* Complete SW reset as soon as it has been requested */
+ if (FIELD_EX32(value, GENET_UMAC_CMD, SW_RESET) == 1) {
+ device_cold_reset(DEVICE(s));
+ value = FIELD_DP32(value, GENET_UMAC_CMD, SW_RESET, 0);
+ }
+ break;
+ /*
+ * TODO: before changing MAC address we'd better inform QEMU
+ * network subsystem about freeing previously used one, but
+ * qemu_macaddr_set_free function isn't accessible for us (marked
+ * as static in net/net.c), see also https://lists.nongnu.org/
+ * archive/html/qemu-devel/2022-07/msg02123.html
+ */
+ case BCM2838_GENET_UMAC_MAC0:
+ mac->a[0] = FIELD_EX32(value, GENET_UMAC_MAC_0, ADDR_0);
+ mac->a[1] = FIELD_EX32(value, GENET_UMAC_MAC_0, ADDR_1);
+ mac->a[2] = FIELD_EX32(value, GENET_UMAC_MAC_0, ADDR_2);
+ mac->a[3] = FIELD_EX32(value, GENET_UMAC_MAC_0, ADDR_3);
+ qemu_macaddr_default_if_unset(mac);
+ qemu_format_nic_info_str(ncs, mac->a);
+ trace_bcm2838_genet_mac_address(ncs->info_str);
+ break;
+ case BCM2838_GENET_UMAC_MAC1:
+ mac->a[4] = FIELD_EX32(value, GENET_UMAC_MAC_1, ADDR_4);
+ mac->a[5] = FIELD_EX32(value, GENET_UMAC_MAC_1, ADDR_5);
+ qemu_macaddr_default_if_unset(mac);
+ qemu_format_nic_info_str(ncs, mac->a);
+ trace_bcm2838_genet_mac_address(ncs->info_str);
+ break;
+ case BCM2838_GENET_UMAC_MDIO_CMD:
+ case BCM2838_GENET_TDMA_REGS
+ ... BCM2838_GENET_TDMA_REGS + sizeof(BCM2838GenetRegsTdma) - 1:
+ qemu_log_mask(LOG_UNIMP,
+ "UMAC MDIO and TDMA aren't implemented yet");
+ break;
+ default:
+ break;
+ }
+
+ memcpy((uint8_t *)&s->regs + offset, &value, size);
+ bcm2838_genet_set_irq_default(s);
+ bcm2838_genet_set_irq_prio(s);
+ } else {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: out-of-range access, %u bytes @ offset 0x%04" PRIx64 "\n",
+ __func__, size, offset);
+ }
}
static const MemoryRegionOps bcm2838_genet_ops = {
@@ -262,9 +381,14 @@ static const MemoryRegionOps bcm2838_genet_ops = {
.valid = {.min_access_size = 4},
};
+static NetClientInfo bcm2838_genet_client_info = {
+ .type = NET_CLIENT_DRIVER_NIC,
+ .size = sizeof(NICState)
+};
static void bcm2838_genet_realize(DeviceState *dev, Error **errp)
{
+ NetClientState *ncs;
BCM2838GenetState *s = BCM2838_GENET(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
@@ -272,10 +396,46 @@ static void bcm2838_genet_realize(DeviceState *dev, Error **errp)
memory_region_init_io(&s->regs_mr, OBJECT(s), &bcm2838_genet_ops, s,
"bcm2838_genet_regs", sizeof(s->regs));
sysbus_init_mmio(sbd, &s->regs_mr);
+
+ /* QEMU-managed NIC (host network back-end connection) */
+ qemu_macaddr_default_if_unset(&s->nic_conf.macaddr);
+ s->nic = qemu_new_nic(&bcm2838_genet_client_info, &s->nic_conf,
+ object_get_typename(OBJECT(dev)), dev->id,
+ &dev->mem_reentrancy_guard, s);
+ bcm2838_genet_set_qemu_mac(s);
+ ncs = qemu_get_queue(s->nic);
+ qemu_format_nic_info_str(ncs, s->nic_conf.macaddr.a);
+ trace_bcm2838_genet_mac_address(ncs->info_str);
+
+ /* Interrupts */
+ sysbus_init_irq(sbd, &s->irq_default);
+ sysbus_init_irq(sbd, &s->irq_prio);
+
+ /* DMA space */
+ address_space_init(&s->dma_as, get_system_memory(), "bcm2838_genet_dma");
}
static void bcm2838_genet_phy_reset(BCM2838GenetState *s)
{
+ memset(&s->phy_regs, 0x00, sizeof(s->phy_regs));
+ memset(&s->phy_shd_regs, 0x00, sizeof(s->phy_shd_regs));
+ memset(&s->phy_aux_ctl_shd_regs, 0x00, sizeof(s->phy_aux_ctl_shd_regs));
+
+ /* All values below were taken from real HW trace and logs */
+ s->phy_regs.bmcr = 0x1140;
+ s->phy_regs.bmsr = 0x7949;
+ s->phy_regs.sid1 = 0x600D;
+ s->phy_regs.sid2 = 0x84A2;
+ s->phy_regs.advertise = 0x01E1;
+ s->phy_regs.ctrl1000 = 0x0200;
+ s->phy_regs.estatus = 0x3000;
+
+ s->phy_shd_regs.clk_ctl = 0x0200;
+ s->phy_shd_regs.scr3 = 0x001F;
+ s->phy_shd_regs.apd = 0x0001;
+
+ s->phy_aux_ctl_shd_regs.misc = 0x1E;
+
trace_bcm2838_genet_phy_reset("done");
}
@@ -285,17 +445,28 @@ static void bcm2838_genet_reset(DeviceState *d)
memset(&s->regs, 0x00, sizeof(s->regs));
+ s->regs.sys.rev_ctrl = FIELD_DP32(s->regs.sys.rev_ctrl, GENET_SYS_REV_CTRL,
+ MAJOR_REV, BCM2838_GENET_REV_MAJOR);
+ s->regs.sys.rev_ctrl = FIELD_DP32(s->regs.sys.rev_ctrl, GENET_SYS_REV_CTRL,
+ MINOR_REV, BCM2838_GENET_REV_MINOR);
+
trace_bcm2838_genet_reset("done");
bcm2838_genet_phy_reset(s);
}
+static Property genet_properties[] = {
+ DEFINE_NIC_PROPERTIES(BCM2838GenetState, nic_conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void bcm2838_genet_class_init(ObjectClass *class, void *data)
{
DeviceClass *dc = DEVICE_CLASS(class);
dc->realize = bcm2838_genet_realize;
dc->reset = bcm2838_genet_reset;
+ device_class_set_props(dc, genet_properties);
}
static const TypeInfo bcm2838_genet_info = {
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index e7a76cda81..b9d6d35cce 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -388,6 +388,8 @@ struct BCM2838GenetState {
SysBusDevice parent_obj;
/*< public >*/
+ NICState *nic;
+ NICConf nic_conf;
MemoryRegion regs_mr;
AddressSpace dma_as;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 29/45] Implement GENET MDIO
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (27 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 28/45] Implement GENET register ops Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 30/45] Implement GENET TX path Sergey Kambalin
` (17 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 126 ++++++++++++++++++++++++++++++++-
include/hw/net/bcm2838_genet.h | 3 +-
2 files changed, 126 insertions(+), 3 deletions(-)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 56ff6a6f39..1fae3ecbc2 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -213,6 +213,7 @@ FIELD(GENET_PHY_STAT_1000, LOCALRXOK, 13, 1)
FIELD(GENET_PHY_STAT_1000, MSRES, 14, 1)
FIELD(GENET_PHY_STAT_1000, MSFAIL, 15, 1)
+/* There are two data representations for PHY_AUX_CTRL register */
REG16(GENET_PHY_AUX_CTRL_0, 0)
FIELD(GENET_PHY_AUX_CTRL_0, REG_ID_MASK, 0, 3)
FIELD(GENET_PHY_AUX_CTRL_0, RSVD_3, 3, 1)
@@ -269,6 +270,123 @@ static void bcm2838_genet_set_irq_prio(BCM2838GenetState *s)
qemu_set_irq(s->irq_prio, level);
}
+static void bcm2838_genet_phy_aux_ctl_write(BCM2838GenetState *s,
+ uint16_t value)
+{
+ uint16_t reg_id = FIELD_EX16(value, GENET_PHY_AUX_CTRL_0, REG_ID);
+ uint16_t reg_id_mask = FIELD_EX16(value, GENET_PHY_AUX_CTRL_0, REG_ID_MASK);
+ uint16_t misc_wren = FIELD_EX16(value, GENET_PHY_AUX_CTRL_0, MISC_WREN);
+ uint16_t reg_data = FIELD_EX16(value, GENET_PHY_AUX_CTRL_0, REG_DATA);
+ uint16_t reg_data12 = FIELD_EX16(value, GENET_PHY_AUX_CTRL_1, REG_DATA);
+
+ uint16_t *phy_aux_ctl_shd_reg_id = (uint16_t *)&s->phy_aux_ctl_shd_regs + reg_id;
+ uint16_t *phy_aux_ctl_shd_reg_id_mask = (uint16_t *)&s->phy_aux_ctl_shd_regs + reg_id_mask;
+
+ if (reg_id_mask == BCM2838_GENET_PHY_AUX_CTL_MISC) {
+ if (reg_id == BCM2838_GENET_PHY_AUX_CTL_MISC) {
+ if (misc_wren == 0) {
+ /* write for subsequent read (8-bit from AUX_CTL_MISC) */
+ FIELD_DP16(value, GENET_PHY_AUX_CTRL_0, REG_DATA, *phy_aux_ctl_shd_reg_id);
+ } else {
+ /* write 8 bits to AUX_CTL_MISC */
+ *phy_aux_ctl_shd_reg_id_mask = reg_data;
+ }
+ } else {
+ /* write for subsequent read (12-bit) */
+ FIELD_DP16(value, GENET_PHY_AUX_CTRL_1, REG_DATA, *phy_aux_ctl_shd_reg_id);
+ }
+ } else {
+ /* write 12 bits */
+ *phy_aux_ctl_shd_reg_id_mask = reg_data12;
+ }
+
+ s->phy_regs.aux_ctl = value;
+}
+
+static void bcm2838_genet_phy_shadow_write(BCM2838GenetState *s,
+ uint16_t value)
+{
+ uint16_t reg_id = FIELD_EX16(value, GENET_PHY_SHADOW, REG_ID);
+ uint16_t wr = FIELD_EX16(value, GENET_PHY_SHADOW, WR);
+ uint16_t reg_data = FIELD_EX16(value, GENET_PHY_SHADOW, REG_DATA);
+
+ uint16_t *phy_shd_reg = (uint16_t *)&s->phy_shd_regs + reg_id;
+
+ if (wr == 0) {
+ FIELD_DP16(value, GENET_PHY_SHADOW, REG_DATA, *phy_shd_reg);
+ } else {
+ *phy_shd_reg = reg_data;
+ }
+
+ s->phy_regs.shd = value;
+}
+
+static void bcm2838_genet_phy_exp_shadow_write(BCM2838GenetState *s,
+ uint16_t value)
+{
+ /* TODO Stub implementation without side effect,
+ just storing registers values */
+ uint16_t reg_id = FIELD_EX16(s->phy_regs.exp_ctrl,
+ GENET_PHY_EXP_SEL, REG_ID);
+ uint16_t block_id = FIELD_EX16(s->phy_regs.exp_ctrl,
+ GENET_PHY_EXP_SEL, BLOCK_ID);
+
+ s->phy_exp_shd_regs.regs[block_id][reg_id] = value;
+}
+
+static uint16_t bcm2838_genet_phy_exp_shadow_read(BCM2838GenetState *s)
+{
+ uint16_t reg_id = FIELD_EX16(s->phy_regs.exp_ctrl,
+ GENET_PHY_EXP_SEL, REG_ID);
+ uint16_t block_id = FIELD_EX16(s->phy_regs.exp_ctrl,
+ GENET_PHY_EXP_SEL, BLOCK_ID);
+
+ return s->phy_exp_shd_regs.regs[block_id][reg_id];
+}
+
+static uint64_t bcm2838_genet_mdio_cmd(BCM2838GenetState *s, uint64_t cmd)
+{
+ uint32_t phy_reg_id = FIELD_EX32(cmd, GENET_UMAC_MDIO_CMD, REG_ID);
+ uint32_t phy_reg_data = FIELD_EX32(cmd, GENET_UMAC_MDIO_CMD, REG_DATA);
+ uint32_t start_busy = FIELD_EX32(cmd, GENET_UMAC_MDIO_CMD, START_BUSY);
+ uint32_t rd = FIELD_EX32(cmd, GENET_UMAC_MDIO_CMD, RD);
+ uint32_t wr = FIELD_EX32(cmd, GENET_UMAC_MDIO_CMD, WR);
+ uint16_t *phy_reg = (uint16_t *)&s->phy_regs + phy_reg_id;
+
+ uint16_t anrestart = FIELD_EX16(phy_reg_data, GENET_PHY_BMCR, ANRESTART);
+
+ if (start_busy != 0) {
+ cmd = FIELD_DP32(cmd, GENET_UMAC_MDIO_CMD, START_BUSY, 0);
+
+ if (rd != 0) {
+ if (phy_reg_id == BCM2838_GENET_EXP_DATA) {
+ cmd = FIELD_DP32(cmd, GENET_UMAC_MDIO_CMD, REG_DATA,
+ bcm2838_genet_phy_exp_shadow_read(s));
+ } else {
+ cmd = FIELD_DP32(cmd, GENET_UMAC_MDIO_CMD, REG_DATA, *phy_reg);
+ }
+ } else if (wr != 0) {
+ if (phy_reg_id == BCM2838_GENET_PHY_AUX_CTL) {
+ bcm2838_genet_phy_aux_ctl_write(s, phy_reg_data);
+ } else if (phy_reg_id == BCM2838_GENET_PHY_SHD) {
+ bcm2838_genet_phy_shadow_write(s, phy_reg_data);
+ } else if (phy_reg_id == BCM2838_GENET_EXP_DATA) {
+ bcm2838_genet_phy_exp_shadow_write(s, phy_reg_data);
+ } else {
+ if (phy_reg_id == BCM2838_GENET_PHY_BMCR) {
+ /* Initiate auto-negotiation once it has been restarted */
+ if (anrestart == 1) {
+ FIELD_DP16(phy_reg_data, GENET_PHY_BMCR, ANRESTART, 0);
+ }
+ }
+ *phy_reg = phy_reg_data;
+ }
+ }
+ }
+
+ return cmd;
+}
+
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
uint64_t value = ~0;
@@ -353,10 +471,13 @@ static void bcm2838_genet_write(void *opaque, hwaddr offset, uint64_t value,
trace_bcm2838_genet_mac_address(ncs->info_str);
break;
case BCM2838_GENET_UMAC_MDIO_CMD:
+ value = bcm2838_genet_mdio_cmd(s, value);
+ s->regs.intrl0.stat = FIELD_DP32(s->regs.intrl0.stat,
+ GENET_INTRL_0, MDIO_DONE, 1);
+ break;
case BCM2838_GENET_TDMA_REGS
... BCM2838_GENET_TDMA_REGS + sizeof(BCM2838GenetRegsTdma) - 1:
- qemu_log_mask(LOG_UNIMP,
- "UMAC MDIO and TDMA aren't implemented yet");
+ qemu_log_mask(LOG_UNIMP, "TDMA isn't implemented yet");
break;
default:
break;
@@ -452,6 +573,7 @@ static void bcm2838_genet_reset(DeviceState *d)
trace_bcm2838_genet_reset("done");
+ bcm2838_genet_set_qemu_mac(s);
bcm2838_genet_phy_reset(s);
}
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index b9d6d35cce..7a483bd265 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -101,7 +101,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_EXP_DATA BCM2838_GENET_PHY_REG(exp_data)
#define BCM2838_GENET_EXP_SEL BCM2838_GENET_PHY_REG(exp_ctrl)
-#define BCM2838_GENET_PHY_AUX_CTL_MISC 0x7
+#define BCM2838_GENET_PHY_AUX_CTL_AUXCTL 0x0
+#define BCM2838_GENET_PHY_AUX_CTL_MISC 0x7
#define BCM2838_GENET_PHY_AUX_CTL_REGS_SIZE 8
#define BCM2838_GENET_PHY_EXP_SHD_BLOCKS_CNT 256
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 30/45] Implement GENET TX path
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (28 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 29/45] Implement GENET MDIO Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 31/45] Implement GENET RX path Sergey Kambalin
` (16 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 221 ++++++++++++++++++++++++++++++++-
include/hw/net/bcm2838_genet.h | 17 +++
2 files changed, 237 insertions(+), 1 deletion(-)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 1fae3ecbc2..4c9b39a3ca 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -234,6 +234,13 @@ REG16(GENET_PHY_EXP_SEL, 0)
FIELD(GENET_PHY_EXP_SEL, REG_ID, 0, 8)
FIELD(GENET_PHY_EXP_SEL, BLOCK_ID, 8, 8)
+REG32(GENET_TX_CSUM_INFO, 0)
+FIELD(GENET_TX_CSUM_INFO, OFFSET, 0, 15)
+FIELD(GENET_TX_CSUM_INFO, PROTO_UDP, 15, 1)
+FIELD(GENET_TX_CSUM_INFO, START, 16, 15)
+FIELD(GENET_TX_CSUM_INFO, LV, 30, 1)
+
+
static void bcm2838_genet_set_qemu_mac(BCM2838GenetState *s)
{
const MACAddr *addr = &s->nic_conf.macaddr;
@@ -387,6 +394,218 @@ static uint64_t bcm2838_genet_mdio_cmd(BCM2838GenetState *s, uint64_t cmd)
return cmd;
}
+static void bcm2838_genet_xmit_packet(NetClientState *s, void *packet,
+ size_t size)
+{
+ uint8_t *buf = packet + sizeof(BCM2838GenetXmitStatus);
+ size_t len = size;
+ uint16_t len_type = 0;
+
+ len -= sizeof(BCM2838GenetXmitStatus);
+ net_checksum_calculate(buf, len, CSUM_ALL);
+
+ memcpy(&len_type, &buf[12], sizeof(len_type));
+ len_type = ntohs(len_type);
+ if (len_type < MAX_PAYLOAD_SIZE) {
+ len_type = len;
+ len_type = htons(len_type);
+ memcpy(&buf[12], &len_type, sizeof(len_type));
+ }
+
+ qemu_send_packet(s, buf, len);
+}
+
+static uint64_t bcm2838_genet_tx(BCM2838GenetState *s, unsigned int ring_index,
+ uint32_t prod_index,
+ uint32_t cons_index)
+{
+ const unsigned int DESC_SIZE_WORDS
+ = sizeof(BCM2838GenetTdmaDesc) / sizeof(uint32_t);
+ const uint64_t RING_START_ADDR
+ = ((uint64_t)s->regs.tdma.rings[ring_index].start_addr_hi << 32)
+ + s->regs.tdma.rings[ring_index].start_addr;
+ const uint64_t RING_END_ADDR
+ = ((uint64_t)s->regs.tdma.rings[ring_index].end_addr_hi << 32)
+ + s->regs.tdma.rings[ring_index].end_addr;
+
+ hwaddr data_addr;
+ uint64_t desc_index;
+ uint32_t desc_status = 0;
+ uint32_t buflength = 0;
+ uint64_t num_descs = 0;
+ uint64_t read_ptr
+ = ((uint64_t)s->regs.tdma.rings[ring_index].read_ptr_hi << 32)
+ + s->regs.tdma.rings[ring_index].read_ptr;
+ off_t packet_off = 0;
+
+ uint32_t prod_index_fld = FIELD_EX32(prod_index,
+ GENET_DMA_PROD_INDEX, INDEX);
+ uint32_t cons_index_fld = FIELD_EX32(cons_index,
+ GENET_DMA_CONS_INDEX, INDEX);
+
+ while (cons_index_fld != prod_index_fld) {
+ desc_index = read_ptr / DESC_SIZE_WORDS;
+ if (desc_index >= BCM2838_GENET_DMA_DESC_CNT) {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: invalid TX descriptor index %" PRIu64 " (exceeds %u)\n",
+ __func__, desc_index, BCM2838_GENET_DMA_DESC_CNT - 1);
+ break;
+ }
+ desc_status = s->regs.tdma.descs[desc_index].length_status;
+ data_addr = ((uint64_t)s->regs.tdma.descs[desc_index].address_hi << 32)
+ + s->regs.tdma.descs[desc_index].address_lo;
+ trace_bcm2838_genet_tx(ring_index, desc_index, desc_status,
+ data_addr);
+
+ if (FIELD_EX32(desc_status, GENET_RDMA_LENGTH_STATUS, SOP) != 0) {
+ packet_off = 0;
+ }
+
+ buflength = FIELD_EX32(desc_status,
+ GENET_RDMA_LENGTH_STATUS, BUFLENGTH);
+
+ /* TODO: Add address_space_read() return value check */
+ address_space_read(&s->dma_as, data_addr,
+ MEMTXATTRS_UNSPECIFIED,
+ s->tx_packet + packet_off,
+ buflength);
+ packet_off += buflength;
+
+ if (FIELD_EX32(desc_status, GENET_RDMA_LENGTH_STATUS, EOP) != 0) {
+ bcm2838_genet_xmit_packet(qemu_get_queue(s->nic), s->tx_packet,
+ packet_off);
+ packet_off = 0;
+ }
+
+ num_descs++;
+ cons_index_fld++;
+ s->regs.tdma.descs[desc_index].length_status =
+ FIELD_DP32(s->regs.tdma.descs[desc_index].length_status,
+ GENET_RDMA_LENGTH_STATUS, OWN, 1);
+ read_ptr = read_ptr == RING_END_ADDR + 1 - DESC_SIZE_WORDS
+ ? RING_START_ADDR : read_ptr + DESC_SIZE_WORDS;
+ }
+
+ s->regs.tdma.rings[ring_index].read_ptr = read_ptr;
+ s->regs.tdma.rings[ring_index].read_ptr_hi = read_ptr >> 32;
+
+ return num_descs;
+}
+
+static bool bcm2838_genet_tdma_ring_active(BCM2838GenetState *s,
+ unsigned int ring_index)
+{
+ uint32_t ctrl_reg = s->regs.tdma.ctrl;
+ uint32_t ring_cfg_reg = s->regs.tdma.ring_cfg;
+ uint32_t ring_mask = 1 << ring_index;
+ bool dma_en = FIELD_EX32(ctrl_reg, GENET_DMA_CTRL, EN) != 0;
+ bool ring_en =
+ (FIELD_EX32(ring_cfg_reg, GENET_DMA_CTRL, EN) & ring_mask) != 0;
+ bool ring_buf_en =
+ (FIELD_EX32(ctrl_reg, GENET_DMA_CTRL, RING_BUF_EN) & ring_mask) != 0;
+ bool active = dma_en && ring_en && ring_buf_en;
+
+ trace_bcm2838_genet_tx_dma_ring_active(ring_index,
+ active ? "active" : "halted");
+ return active;
+}
+
+static void bcm2838_genet_tdma(BCM2838GenetState *s, hwaddr offset,
+ uint64_t value)
+{
+ hwaddr ring_offset;
+ uint64_t num_descs_tx;
+ unsigned int ring_index;
+ uint32_t tx_intrs;
+ uint32_t cons_index;
+ uint32_t prod_index = value;
+ uint32_t ring_cfg = value;
+ uint32_t dma_ctrl = value;
+
+ uint32_t cons_index_fld;
+ uint32_t prod_index_fld =
+ FIELD_EX32(prod_index, GENET_DMA_PROD_INDEX, INDEX);
+
+ uint32_t exst_tdma_en =
+ FIELD_EX32(s->regs.tdma.ctrl, GENET_DMA_CTRL, EN);
+ uint32_t exst_ring_en =
+ FIELD_EX32(s->regs.tdma.ring_cfg, GENET_DMA_RING_CFG, EN);
+ uint32_t incm_tdma_en =
+ FIELD_EX32(dma_ctrl, GENET_DMA_CTRL, EN);
+ uint32_t incm_ring_en =
+ FIELD_EX32(ring_cfg, GENET_DMA_RING_CFG, EN);
+ uint32_t incm_ring_buf_en =
+ FIELD_EX32(dma_ctrl, GENET_DMA_CTRL, RING_BUF_EN);
+
+ switch (offset) {
+ case BCM2838_GENET_TDMA_RINGS
+ ... BCM2838_GENET_TDMA_RINGS + sizeof(s->regs.tdma.rings) - 1:
+ ring_index = (offset - BCM2838_GENET_TDMA_RINGS)
+ / sizeof(BCM2838GenetTdmaRing);
+ if (bcm2838_genet_tdma_ring_active(s, ring_index)) {
+ ring_offset = offset - BCM2838_GENET_TDMA_RINGS
+ - ring_index * sizeof(BCM2838GenetTdmaRing);
+ switch (ring_offset) {
+ case BCM2838_GENET_TRING_PROD_INDEX:
+ cons_index = s->regs.tdma.rings[ring_index].cons_index;
+ cons_index_fld = FIELD_EX32(cons_index,
+ GENET_DMA_CONS_INDEX, INDEX);
+ if (cons_index_fld != prod_index_fld) {
+ trace_bcm2838_genet_tx_request(ring_index,
+ prod_index_fld,
+ cons_index_fld);
+ num_descs_tx = bcm2838_genet_tx(s, ring_index, prod_index,
+ cons_index);
+ if (num_descs_tx > 0) {
+ s->regs.tdma.rings[ring_index].cons_index =
+ FIELD_DP32(s->regs.tdma.rings[ring_index].cons_index,
+ GENET_DMA_CONS_INDEX, INDEX,
+ cons_index + num_descs_tx);
+
+ if (ring_index == BCM2838_GENET_DMA_RING_DEFAULT) {
+ s->regs.intrl0.stat =
+ FIELD_DP32(s->regs.intrl0.stat, GENET_INTRL_0,
+ TXDMA_MBDONE, 1);
+ } else {
+ tx_intrs = FIELD_EX32(s->regs.intrl1.stat,
+ GENET_INTRL_1, TX_INTRS);
+ s->regs.intrl1.stat =
+ FIELD_DP32(s->regs.intrl1.stat,
+ GENET_INTRL_1, TX_INTRS,
+ tx_intrs | 1 << ring_index);
+ }
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ break;
+ case BCM2838_GENET_TDMA_RING_CFG:
+ if (exst_ring_en != incm_ring_en) {
+ trace_bcm2838_genet_tx_dma_ring(incm_ring_en);
+ }
+ break;
+ case BCM2838_GENET_TDMA_CTRL:
+ if (exst_tdma_en != incm_tdma_en) {
+ s->regs.tdma.status = FIELD_DP32(s->regs.tdma.status,
+ GENET_DMA_STATUS,
+ DISABLED, !exst_tdma_en);
+ trace_bcm2838_genet_tx_dma(incm_tdma_en == 1
+ ? "enabled"
+ : "disabled");
+ }
+ if (exst_ring_en != incm_ring_buf_en) {
+ trace_bcm2838_genet_tx_dma_ring_buf(incm_ring_buf_en);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
static uint64_t bcm2838_genet_read(void *opaque, hwaddr offset, unsigned size)
{
uint64_t value = ~0;
@@ -477,7 +696,7 @@ static void bcm2838_genet_write(void *opaque, hwaddr offset, uint64_t value,
break;
case BCM2838_GENET_TDMA_REGS
... BCM2838_GENET_TDMA_REGS + sizeof(BCM2838GenetRegsTdma) - 1:
- qemu_log_mask(LOG_UNIMP, "TDMA isn't implemented yet");
+ bcm2838_genet_tdma(s, offset, value);
break;
default:
break;
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index 7a483bd265..f96ea3a145 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -108,6 +108,21 @@ OBJECT_DECLARE_SIMPLE_TYPE(BCM2838GenetState, BCM2838_GENET)
#define BCM2838_GENET_PHY_EXP_SHD_BLOCKS_CNT 256
#define BCM2838_GENET_PHY_EXP_SHD_REGS_CNT 256
+#define MAX_FRAME_SIZE 0xFFF
+#define MAX_PACKET_SIZE 1518
+#define MAX_PAYLOAD_SIZE 1500
+#define TX_MIN_PKT_SIZE 60
+
+
+typedef struct BCM2838GenetXmitStatus {
+ uint32_t length_status; /* length and peripheral status */
+ uint32_t ext_status; /* Extended status */
+ uint32_t rx_csum; /* partial rx checksum */
+ uint32_t unused1[9]; /* unused */
+ uint32_t tx_csum_info; /* Tx checksum info. */
+ uint32_t unused2[3]; /* unused */
+} BCM2838GenetXmitStatus;
+
typedef struct {
uint32_t rev_ctrl;
uint32_t port_ctrl;
@@ -403,6 +418,8 @@ struct BCM2838GenetState {
qemu_irq irq_default;
qemu_irq irq_prio;
+
+ uint8_t tx_packet[MAX_FRAME_SIZE];
};
#endif /* BCM2838_GENET_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 31/45] Implement GENET RX path
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (29 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 30/45] Implement GENET TX path Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 32/45] Enable BCM2838 GENET controller Sergey Kambalin
` (15 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/net/bcm2838_genet.c | 265 ++++++++++++++++++++++++++++++++-
include/hw/net/bcm2838_genet.h | 1 +
2 files changed, 265 insertions(+), 1 deletion(-)
diff --git a/hw/net/bcm2838_genet.c b/hw/net/bcm2838_genet.c
index 4c9b39a3ca..61c1981e10 100644
--- a/hw/net/bcm2838_genet.c
+++ b/hw/net/bcm2838_genet.c
@@ -511,6 +511,25 @@ static bool bcm2838_genet_tdma_ring_active(BCM2838GenetState *s,
return active;
}
+static bool bcm2838_genet_rdma_ring_active(BCM2838GenetState *s,
+ unsigned int ring_index)
+{
+ uint32_t ring_mask = 1 << ring_index;
+
+ bool dma_en = FIELD_EX32(s->regs.rdma.ctrl, GENET_DMA_CTRL, EN) != 0;
+ bool ring_en = (FIELD_EX32(s->regs.rdma.ring_cfg, GENET_DMA_RING_CFG, EN)
+ & ring_mask) != 0;
+ bool ring_buf_en = (FIELD_EX32(s->regs.rdma.ctrl,
+ GENET_DMA_CTRL, RING_BUF_EN)
+ & ring_mask) != 0;
+ bool active = dma_en && ring_en && ring_buf_en;
+
+ trace_bcm2838_genet_rx_dma_ring_active(ring_index,
+ active ? "active" : "halted");
+
+ return active;
+}
+
static void bcm2838_genet_tdma(BCM2838GenetState *s, hwaddr offset,
uint64_t value)
{
@@ -721,9 +740,251 @@ static const MemoryRegionOps bcm2838_genet_ops = {
.valid = {.min_access_size = 4},
};
+static int32_t bcm2838_genet_filter(BCM2838GenetState *s, const void *buf,
+ size_t size)
+{
+ qemu_log_mask(LOG_UNIMP,
+ "Packet filtration with HFB isn't implemented yet");
+ return -1;
+}
+
+static int32_t bcm2838_genet_filter2ring(BCM2838GenetState *s,
+ uint32_t filter_idx)
+{
+ qemu_log_mask(LOG_UNIMP,
+ "Packet filtration with HFB isn't implemented yet");
+ return -1;
+}
+
+static bool is_packet_broadcast(const uint8_t *buf, size_t size)
+{
+ static const uint8_t bcst_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+ if (size < sizeof(bcst_addr)) {
+ return false;
+ }
+
+ return !memcmp(buf, bcst_addr, sizeof(bcst_addr));
+}
+
+static bool is_packet_multicast(const uint8_t *buf, size_t size)
+{
+ return !!(buf[0] & 0x01);
+}
+
+static ssize_t bcm2838_genet_rdma(BCM2838GenetState *s, uint32_t ring_idx,
+ const void *buf, size_t size)
+{
+ const size_t DESC_WORD_SIZE =
+ sizeof(BCM2838GenetRdmaDesc) / sizeof(uint32_t);
+
+ ssize_t len = 0;
+ BCM2838GenetRegsRdma *rdma = &s->regs.rdma;
+ BCM2838GenetRdmaRing *ring = &rdma->rings[ring_idx];
+ hwaddr write_index =
+ (ring->write_ptr + ((hwaddr)ring->write_ptr_hi << 32)) / DESC_WORD_SIZE;
+ BCM2838GenetRdmaDesc *desc = &rdma->descs[write_index];
+
+ const hwaddr START_INDEX =
+ (ring->start_addr + ((hwaddr)ring->start_addr_hi << 32))
+ / DESC_WORD_SIZE;
+ const hwaddr END_INDEX =
+ (ring->end_addr + ((hwaddr)ring->end_addr_hi << 32)) / DESC_WORD_SIZE;
+
+ if (!bcm2838_genet_rdma_ring_active(s, ring_idx)) {
+ return -1;
+ }
+
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS, SOP, 1);
+
+ while (len < size) {
+ size_t l = size - len;
+ size_t buf_size = ring->ring_buf_size & 0xffff;
+ uint8_t *dma_buf = s->rx_packet;
+ hwaddr dma_buf_addr =
+ desc->address_lo + ((hwaddr)desc->address_hi << 32);
+ MemTxResult mem_tx_result = MEMTX_OK;
+ uint8_t *frame_buf = dma_buf + sizeof(BCM2838GenetXmitStatus) + 2;
+ BCM2838GenetXmitStatus *xmit_status = (BCM2838GenetXmitStatus *)dma_buf;
+ struct iovec iov;
+ bool isip4, isip6;
+ size_t l3hdr_off, l4hdr_off, l5hdr_off;
+ eth_ip6_hdr_info ip6hdr_info;
+ eth_ip4_hdr_info ip4hdr_info;
+ eth_l4_hdr_info l4hdr_info;
+
+ bool crc_fwd = FIELD_EX32(s->regs.umac.cmd, GENET_UMAC_CMD, CRC_FWD);
+ size_t buflength;
+ uint32_t prod_index;
+
+ if (l > ring->ring_buf_size) {
+ l = ring->ring_buf_size;
+ }
+
+ memcpy(frame_buf, buf + len, l);
+ iov.iov_base = frame_buf;
+ iov.iov_len = l;
+ eth_get_protocols(&iov, 1, 0,
+ &isip4, &isip6,
+ &l3hdr_off, &l4hdr_off, &l5hdr_off,
+ &ip6hdr_info, &ip4hdr_info, &l4hdr_info);
+
+ len += l;
+
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS,
+ EOP, !!(len >= size));
+
+ buflength = l + sizeof(BCM2838GenetXmitStatus) + 2;
+ if (crc_fwd) {
+ buflength += 4;
+ }
+
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS,
+ BUFLENGTH, buflength);
+
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS,
+ BROADCAST,
+ !!is_packet_broadcast(frame_buf, l));
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS,
+ MULTICAST,
+ !!is_packet_multicast(frame_buf, l));
+
+ xmit_status->rx_csum = 0;
+ if (isip4) {
+ xmit_status->rx_csum = ip4hdr_info.ip4_hdr.ip_sum;
+ }
+ xmit_status->length_status = desc->length_status;
+
+ mem_tx_result = address_space_write(&s->dma_as, dma_buf_addr,
+ MEMTXATTRS_UNSPECIFIED,
+ dma_buf, buf_size);
+ if (mem_tx_result != MEMTX_OK) {
+ desc->length_status = FIELD_DP32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS,
+ RXERR, 1);
+ }
+
+ if (FIELD_EX32(desc->length_status,
+ GENET_RDMA_LENGTH_STATUS, RXERR) != 0) {
+ break;
+ }
+
+ prod_index = FIELD_EX32(ring->prod_index, GENET_DMA_PROD_INDEX, INDEX);
+ ring->prod_index = FIELD_DP32(ring->prod_index,
+ GENET_DMA_PROD_INDEX,
+ INDEX, ++prod_index);
+ if (++write_index > END_INDEX) {
+ write_index = START_INDEX;
+ }
+ desc = &rdma->descs[write_index];
+ ring->write_ptr = write_index * DESC_WORD_SIZE;
+ ring->write_ptr_hi = ((hwaddr)write_index * DESC_WORD_SIZE) >> 32;
+ }
+
+ if (ring_idx == BCM2838_GENET_DMA_RING_DEFAULT) {
+ s->regs.intrl0.stat = FIELD_DP32(s->regs.intrl0.stat,
+ GENET_INTRL_0, RXDMA_MBDONE, 1);
+ } else {
+ uint32_t rx_intrs =
+ FIELD_EX32(s->regs.intrl1.stat, GENET_INTRL_1, RX_INTRS);
+ rx_intrs |= 1 << ring_idx;
+
+ s->regs.intrl1.stat = FIELD_DP32(s->regs.intrl1.stat,
+ GENET_INTRL_1, RX_INTRS, rx_intrs);
+ }
+
+ return len;
+}
+
+static ssize_t bcm2838_genet_receive(NetClientState *nc, const uint8_t *buf,
+ size_t size)
+{
+ BCM2838GenetState *s = (BCM2838GenetState *)qemu_get_nic_opaque(nc);
+ ssize_t bytes_received = -1;
+ int32_t filter_index = -1;
+ int32_t ring_index = -1;
+
+ if (FIELD_EX32(s->regs.rdma.ctrl, GENET_DMA_CTRL, EN) != 0) {
+ filter_index = bcm2838_genet_filter(s, buf, size);
+
+ if (filter_index >= 0) {
+ ring_index = bcm2838_genet_filter2ring(s, filter_index);
+ } else {
+ ring_index = BCM2838_GENET_DMA_RING_CNT - 1;
+ }
+
+ if (size <= MAX_PACKET_SIZE) {
+ bytes_received = bcm2838_genet_rdma(s, ring_index, buf, size);
+ }
+ }
+
+ bcm2838_genet_set_irq_default(s);
+ bcm2838_genet_set_irq_prio(s);
+
+ return bytes_received;
+}
+
+static void bcm2838_genet_phy_update_link(BCM2838GenetState *s)
+{
+ bool qemu_link_down = qemu_get_queue(s->nic)->link_down != 0;
+
+ bool lstatus = FIELD_EX32(s->phy_regs.bmsr, GENET_PHY_BMSR, LSTATUS) != 0;
+
+ if (qemu_link_down && lstatus) {
+ trace_bcm2838_genet_phy_update_link("down");
+
+ s->phy_regs.bmsr = FIELD_DP32(s->phy_regs.bmsr,
+ GENET_PHY_BMSR, ANEGCOMPLETE, 0);
+ s->phy_regs.bmsr = FIELD_DP32(s->phy_regs.bmsr,
+ GENET_PHY_BMSR, LSTATUS, 0);
+ s->regs.intrl0.stat = FIELD_DP32(s->regs.intrl0.stat,
+ GENET_INTRL_0, LINK_DOWN, 1);
+ } else if (!qemu_link_down && !lstatus) {
+ trace_bcm2838_genet_phy_update_link("up");
+
+ /*
+ * Complete auto-negotiation (fixed link partner's abilities for now:
+ * 1Gbps with flow control)
+ */
+ s->phy_regs.stat1000 = FIELD_DP32(s->phy_regs.stat1000,
+ GENET_PHY_STAT_1000, HALF, 1);
+ s->phy_regs.stat1000 = FIELD_DP32(s->phy_regs.stat1000,
+ GENET_PHY_STAT_1000, FULL, 1);
+
+ s->phy_regs.lpa = FIELD_DP32(s->phy_regs.lpa,
+ GENET_PHY_LPA, PAUSE_CAP, 1);
+ s->phy_regs.lpa = FIELD_DP32(s->phy_regs.lpa,
+ GENET_PHY_LPA, PAUSE_ASYM, 1);
+ s->phy_regs.lpa = FIELD_DP32(s->phy_regs.lpa, GENET_PHY_LPA, LPACK, 1);
+
+ s->phy_regs.bmsr = FIELD_DP32(s->phy_regs.bmsr,
+ GENET_PHY_BMSR, ANEGCOMPLETE, 1);
+ s->phy_regs.bmsr = FIELD_DP32(s->phy_regs.bmsr,
+ GENET_PHY_BMSR, LSTATUS, 1);
+
+ s->regs.intrl0.stat = FIELD_DP32(s->regs.intrl0.stat,
+ GENET_INTRL_0, LINK_UP, 1);
+ }
+
+ bcm2838_genet_set_irq_default(s);
+}
+static void bcm2838_genet_set_link(NetClientState *nc)
+{
+ BCM2838GenetState *s = qemu_get_nic_opaque(nc);
+
+ bcm2838_genet_phy_update_link(s);
+}
+
static NetClientInfo bcm2838_genet_client_info = {
.type = NET_CLIENT_DRIVER_NIC,
- .size = sizeof(NICState)
+ .size = sizeof(NICState),
+ .receive = bcm2838_genet_receive,
+ .link_status_changed = bcm2838_genet_set_link,
};
static void bcm2838_genet_realize(DeviceState *dev, Error **errp)
@@ -777,6 +1038,8 @@ static void bcm2838_genet_phy_reset(BCM2838GenetState *s)
s->phy_aux_ctl_shd_regs.misc = 0x1E;
trace_bcm2838_genet_phy_reset("done");
+
+ bcm2838_genet_phy_update_link(s);
}
static void bcm2838_genet_reset(DeviceState *d)
diff --git a/include/hw/net/bcm2838_genet.h b/include/hw/net/bcm2838_genet.h
index f96ea3a145..f044d0d17e 100644
--- a/include/hw/net/bcm2838_genet.h
+++ b/include/hw/net/bcm2838_genet.h
@@ -420,6 +420,7 @@ struct BCM2838GenetState {
qemu_irq irq_prio;
uint8_t tx_packet[MAX_FRAME_SIZE];
+ uint8_t rx_packet[MAX_FRAME_SIZE];
};
#endif /* BCM2838_GENET_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 32/45] Enable BCM2838 GENET controller
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (30 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 31/45] Implement GENET RX path Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 15:13 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 33/45] Connect RNG200, PCIE and GENET to GIC Sergey Kambalin
` (14 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838_peripherals.c | 16 ++++++++++++++++
hw/arm/raspi4b.c | 17 -----------------
include/hw/arm/bcm2838_peripherals.h | 2 ++
3 files changed, 18 insertions(+), 17 deletions(-)
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 65a659c15c..d962999daf 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -47,6 +47,15 @@ static void bcm2838_peripherals_init(Object *obj)
object_initialize_child(obj, "pcie-host", &s->pcie_host,
TYPE_BCM2838_PCIE_HOST);
+ /* Gigabit Ethernet */
+ object_initialize_child(obj, "genet", &s->genet, TYPE_BCM2838_GENET);
+ for (int i = 0; i < nb_nics; i++) {
+ if ((nd_table[i].used && nd_table[i].model) && !strcmp(nd_table[i].model, "bcmgenet")) {
+ qdev_set_nic_properties(DEVICE(&s->genet), &nd_table[i]);
+ break;
+ }
+ }
+
/* Extended Mass Media Controller 2 */
object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
@@ -231,6 +240,13 @@ static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(get_system_memory(), PCIE_MMIO_ARM_OFFSET,
&s->pcie_mmio_alias);
+ /* Gigabit Ethernet */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->genet), errp)) {
+ return;
+ }
+ regs_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->genet), 0);
+ memory_region_add_subregion(&s->peri_low_mr, GENET_OFFSET, regs_mr);
+
create_unimp(s_base, &s->clkisp, "bcm2835-clkisp", CLOCK_ISP_OFFSET,
CLOCK_ISP_SIZE);
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index fda27d36cb..8aa8dfb087 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -64,23 +64,6 @@ static int raspi_add_memory_node(void *fdt, hwaddr mem_base, hwaddr mem_len)
static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
{
-
- /* Temporarily disable following devices until they are implemented*/
- const char *to_be_removed_from_dt_as_wa[] = {
- "brcm,bcm2711-genet-v5",
- };
-
- for (int i = 0; i < ARRAY_SIZE(to_be_removed_from_dt_as_wa); i++) {
- const char *dev_str = to_be_removed_from_dt_as_wa[i];
-
- int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
- if (offset >= 0) {
- if (!fdt_nop_node(fdt, offset)) {
- warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
- }
- }
- }
-
uint64_t ram_size = board_ram_size(info->board_id);
if (info->ram_size > UPPER_RAM_BASE) {
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 20b7d1eb67..1cfcf5dcce 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -13,6 +13,7 @@
#include "hw/misc/bcm2838_rng200.h"
#include "hw/misc/bcm2838_thermal.h"
#include "hw/arm/bcm2838_pcie.h"
+#include "hw/net/bcm2838_genet.h"
#include "hw/sd/sdhci.h"
#include "hw/gpio/bcm2838_gpio.h"
@@ -73,6 +74,7 @@ struct BCM2838PeripheralState {
UnimplementedDeviceState clkisp;
BCM2838PcieHostState pcie_host;
BCM2838GpioState gpio;
+ BCM2838GenetState genet;
OrIRQState mmc_irq_orgate;
OrIRQState dma_7_8_irq_orgate;
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 33/45] Connect RNG200, PCIE and GENET to GIC
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (31 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 32/45] Enable BCM2838 GENET controller Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:48 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 34/45] Add Rpi4b boot tests Sergey Kambalin
` (13 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/arm/bcm2838.c | 19 +++++++++++++++++++
include/hw/arm/bcm2838_peripherals.h | 2 ++
2 files changed, 21 insertions(+)
diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
index 89cd9d5d8c..83f84b22ad 100644
--- a/hw/arm/bcm2838.c
+++ b/hw/arm/bcm2838.c
@@ -210,6 +210,10 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
+ /* Connect RNG200 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps->rng200), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_RNG200));
+
/* Connect DMA 0-6 to the interrupt controller */
for (int_n = GIC_SPI_INTERRUPT_DMA_0; int_n <= GIC_SPI_INTERRUPT_DMA_6;
int_n++) {
@@ -232,6 +236,21 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_9_10));
+ /* Connect PCIe host bridge to the interrupt controller */
+ for (n = 0; n < BCM2838_PCIE_NUM_IRQS; n++) {
+ int_n = GIC_SPI_INTERRUPT_PCI_INT_A + n;
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps->pcie_host), n,
+ qdev_get_gpio_in(gicdev, int_n));
+ bcm2838_pcie_host_set_irq_num(BCM2838_PCIE_HOST(&ps->pcie_host), n,
+ int_n);
+ }
+
+ /* Connect Gigabit Ethernet controller to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_A));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 1,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_B));
+
/* Pass through inbound GPIO lines to the GIC */
qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index 1cfcf5dcce..cdeb892f04 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -17,6 +17,8 @@
#include "hw/sd/sdhci.h"
#include "hw/gpio/bcm2838_gpio.h"
+#define GENET_OFFSET 0x1580000
+
/* SPI */
#define GIC_SPI_INTERRUPT_MBOX 33
#define GIC_SPI_INTERRUPT_MPHI 40
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 33/45] Connect RNG200, PCIE and GENET to GIC
2023-12-08 2:31 ` [PATCH v4 33/45] Connect RNG200, PCIE and GENET to GIC Sergey Kambalin
@ 2024-01-15 14:48 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:48 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:34, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838.c | 19 +++++++++++++++++++
> include/hw/arm/bcm2838_peripherals.h | 2 ++
> 2 files changed, 21 insertions(+)
>
> diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
> index 89cd9d5d8c..83f84b22ad 100644
> --- a/hw/arm/bcm2838.c
> +++ b/hw/arm/bcm2838.c
> @@ -210,6 +210,10 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
> qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
>
> + /* Connect RNG200 to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps->rng200), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_RNG200));
> +
> /* Connect DMA 0-6 to the interrupt controller */
> for (int_n = GIC_SPI_INTERRUPT_DMA_0; int_n <= GIC_SPI_INTERRUPT_DMA_6;
> int_n++) {
> @@ -232,6 +236,21 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
> qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
> qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_9_10));
>
> + /* Connect PCIe host bridge to the interrupt controller */
> + for (n = 0; n < BCM2838_PCIE_NUM_IRQS; n++) {
> + int_n = GIC_SPI_INTERRUPT_PCI_INT_A + n;
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps->pcie_host), n,
> + qdev_get_gpio_in(gicdev, int_n));
> + bcm2838_pcie_host_set_irq_num(BCM2838_PCIE_HOST(&ps->pcie_host), n,
> + int_n);
> + }
> +
> + /* Connect Gigabit Ethernet controller to the interrupt controller */
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 0,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_A));
> + sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 1,
> + qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_B));
> +
> /* Pass through inbound GPIO lines to the GIC */
> qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
These lines of code that wire up the interrupt lines for
the RNG200, PCIE controller, and ethernet controller,
should instead go in the various patches that add those
devices to the SoC.
> diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
> index 1cfcf5dcce..cdeb892f04 100644
> --- a/include/hw/arm/bcm2838_peripherals.h
> +++ b/include/hw/arm/bcm2838_peripherals.h
> @@ -17,6 +17,8 @@
> #include "hw/sd/sdhci.h"
> #include "hw/gpio/bcm2838_gpio.h"
>
> +#define GENET_OFFSET 0x1580000
This isn't used in this patch -- presumably it should be in
some other patch.
> +
> /* SPI */
> #define GIC_SPI_INTERRUPT_MBOX 33
> #define GIC_SPI_INTERRUPT_MPHI 40
> --
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 34/45] Add Rpi4b boot tests
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (32 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 33/45] Connect RNG200, PCIE and GENET to GIC Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 35/45] Add mailbox test stub Sergey Kambalin
` (12 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/avocado/boot_linux_console.py | 92 +++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py
index 6eab515718..b5c090ae64 100644
--- a/tests/avocado/boot_linux_console.py
+++ b/tests/avocado/boot_linux_console.py
@@ -501,6 +501,98 @@ def test_arm_raspi2_initrd(self):
# Wait for VM to shut down gracefully
self.vm.wait()
+ def test_arm_raspi4(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=machine:raspi4b-2g
+ :avocado: tags=device:pl011
+ :avocado: tags=accel:tcg
+ :avocado: tags=rpi4b
+
+ The kernel can be rebuilt using the kernel source referenced
+ and following the instructions on the on:
+ https://www.raspberrypi.org/documentation/linux/kernel/building.md
+ """
+
+ deb_url = ('http://archive.raspberrypi.org/debian/'
+ 'pool/main/r/raspberrypi-firmware/'
+ 'raspberrypi-kernel_1.20230106-1_arm64.deb')
+ deb_hash = '08dc55696535b18a6d4fe6fa10d4c0d905cbb2ed'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ kernel_path = self.extract_from_deb(deb_path, '/boot/kernel8.img')
+ dtb_path = self.extract_from_deb(deb_path, '/boot/bcm2711-rpi-4-b.dtb')
+
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'earlycon=pl011,mmio32,0xfe201000 ' +
+ 'console=ttyAMA0,115200 ' +
+ 'root=/dev/mmcblk1p2 rootwait ' +
+ 'dwc_otg.fiq_fsm_enable=0')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-append', kernel_command_line,
+ '-device', 'qemu-xhci,bus=pcie.1,id=xhci',
+ '-device', 'usb-kbd,bus=xhci.0')
+ self.vm.launch()
+ console_pattern = 'Kernel command line: %s' % kernel_command_line
+ self.wait_for_console_pattern(console_pattern)
+ console_pattern = 'Product: QEMU USB Keyboard'
+ self.wait_for_console_pattern(console_pattern)
+
+
+ def test_arm_raspi4_initrd(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=machine:raspi4b-2g
+ :avocado: tags=device:pl011
+ :avocado: tags=accel:tcg
+ :avocado: tags=rpi4b
+
+ The kernel can be rebuilt using the kernel source referenced
+ and following the instructions on the on:
+ https://www.raspberrypi.org/documentation/linux/kernel/building.md
+ """
+ deb_url = ('http://archive.raspberrypi.org/debian/'
+ 'pool/main/r/raspberrypi-firmware/'
+ 'raspberrypi-kernel_1.20230106-1_arm64.deb')
+ deb_hash = '08dc55696535b18a6d4fe6fa10d4c0d905cbb2ed'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ kernel_path = self.extract_from_deb(deb_path, '/boot/kernel8.img')
+ dtb_path = self.extract_from_deb(deb_path, '/boot/bcm2711-rpi-4-b.dtb')
+
+ initrd_url = ('https://github.com/groeck/linux-build-test/raw/'
+ '86b2be1384d41c8c388e63078a847f1e1c4cb1de/rootfs/'
+ 'arm64/rootfs.cpio.gz')
+ initrd_hash = 'f3d4f9fa92a49aa542f1b44d34be77bbf8ca5b9d'
+ initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
+ initrd_path = os.path.join(self.workdir, 'rootfs.cpio')
+ archive.gzip_uncompress(initrd_path_gz, initrd_path)
+
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'earlycon=pl011,mmio32,0xfe201000 ' +
+ 'console=ttyAMA0,115200 ' +
+ 'panic=-1 noreboot ' +
+ 'dwc_otg.fiq_fsm_enable=0')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-initrd', initrd_path,
+ '-append', kernel_command_line,
+ '-device', 'qemu-xhci,bus=pcie.1,id=xhci',
+ '-device', 'usb-kbd,bus=xhci.0',
+ '-no-reboot')
+ self.vm.launch()
+ self.wait_for_console_pattern('Boot successful.')
+
+ exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+ 'BCM2835')
+ exec_command_and_wait_for_pattern(self, 'cat /proc/iomem',
+ 'cprman@7e101000')
+ exec_command_and_wait_for_pattern(self, 'halt', 'reboot: System halted')
+ # TODO: Raspberry Pi4 doesn't shut down properly with recent kernels
+ # Wait for VM to shut down gracefully
+ #self.vm.wait()
+
def test_arm_exynos4210_initrd(self):
"""
:avocado: tags=arch:arm
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 35/45] Add mailbox test stub
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (33 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 34/45] Add Rpi4b boot tests Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:52 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 36/45] Add mailbox test constants Sergey Kambalin
` (11 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
include/hw/arm/bcm2838_peripherals.h | 2 +
tests/qtest/bcm2838-mailbox.c | 71 ++++++++++++++++++++++++++++
tests/qtest/bcm2838-mailbox.h | 46 ++++++++++++++++++
tests/qtest/meson.build | 1 +
4 files changed, 120 insertions(+)
create mode 100644 tests/qtest/bcm2838-mailbox.c
create mode 100644 tests/qtest/bcm2838-mailbox.h
diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index cdeb892f04..2b97e55048 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -56,6 +56,8 @@
#define BCM2838_MPHI_OFFSET 0xb200
#define BCM2838_MPHI_SIZE 0x200
+#define GENET_OFFSET 0x1580000
+
#define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
BCM2838_PERIPHERALS)
diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
new file mode 100644
index 0000000000..2edc24e15e
--- /dev/null
+++ b/tests/qtest/bcm2838-mailbox.c
@@ -0,0 +1,71 @@
+/*
+ * Helper functions to work with BCM2838 mailbox via qtest interface.
+ *
+ * Copyright (c) 2023 Auriga LLC
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/registerfields.h"
+#include "libqtest-single.h"
+#include "bcm2838-mailbox.h"
+
+
+static uint32_t qtest_mbox0_read_reg32(QTestState *s, uint32_t offset)
+{
+ return qtest_readl(s, MBOX0_BASE + offset);
+}
+
+static void qtest_mbox1_write_reg32(QTestState *s, uint32_t offset, uint32_t value)
+{
+ return qtest_writel(s, MBOX1_BASE + offset, value);
+}
+
+static void qtest_mbox1_write(QTestState *s, uint8_t channel, uint32_t data)
+{
+ uint32_t reg;
+
+ reg = FIELD_DP32(reg, MBOX_WRITE_REG, CHANNEL, channel);
+ reg = FIELD_DP32(reg, MBOX_WRITE_REG, DATA, data);
+ qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, reg);
+}
+
+int qtest_mbox0_has_data(QTestState *s) {
+ return !(qtest_mbox0_read_reg32(s, MBOX_REG_STATUS) & MBOX_READ_EMPTY);
+}
+
+int mbox0_has_data(void) {
+ return qtest_mbox0_has_data(global_qtest);
+}
+
+void qtest_mbox0_read_message(QTestState *s,
+ uint8_t channel,
+ void *msgbuf,
+ size_t msgbuf_size)
+{
+ uint32_t reg;
+ uint32_t msgaddr;
+
+ g_assert(qtest_mbox0_has_data(s));
+ reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
+ g_assert_cmphex(FIELD_EX32(reg, MBOX_WRITE_REG, CHANNEL), ==, channel);
+ msgaddr = FIELD_EX32(reg, MBOX_WRITE_REG, DATA) << 4;
+ qtest_memread(s, msgaddr, msgbuf, msgbuf_size);
+}
+
+void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size) {
+ qtest_mbox0_read_message(global_qtest, channel, msgbuf, msgbuf_size);
+}
+
+void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr)
+{
+ qtest_mbox1_write(s, channel, msg_addr >> 4);
+}
+
+
+void mbox1_write_message(uint8_t channel, uint32_t msg_addr)
+{
+ qtest_mbox1_write_message(global_qtest, channel, msg_addr);
+}
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
new file mode 100644
index 0000000000..1d02ca9c2c
--- /dev/null
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -0,0 +1,46 @@
+/*
+ * Declarations for BCM2838 mailbox test.
+ *
+ * Copyright (c) 2023 Auriga LLC
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+
+REG32(MBOX_WRITE_REG, 0)
+FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
+FIELD(MBOX_WRITE_REG, DATA, 4, 28)
+
+REG32(MBOX_SIZE_STAT, 0)
+FIELD(MBOX_WRITE_REG, SIZE, 0, 30)
+FIELD(MBOX_WRITE_REG, SUCCESS, 30, 1)
+
+typedef struct {
+ uint32_t size;
+ uint32_t req_resp_code;
+} MboxBufHeader;
+
+#define DECLARE_TAG_TYPE(TypeName, RequestValueType, ResponseValueType) \
+typedef struct { \
+ uint32_t id; \
+ uint32_t value_buffer_size; \
+ union { \
+ struct { \
+ uint32_t zero; \
+ RequestValueType value; \
+ } request; \
+ struct { \
+ uint32_t size_stat; \
+ ResponseValueType value; \
+ } response; \
+ }; \
+} TypeName
+
+
+int mbox0_has_data(void);
+void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size);
+void mbox1_write_message(uint8_t channel, uint32_t msg_addr);
+int qtest_mbox0_has_data(QTestState *s);
+void qtest_mbox0_read_message(QTestState *s, uint8_t channel, void *msgbuf, size_t msgbuf_size);
+void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr);
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 47dabf91d0..92eba5ac99 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -321,6 +321,7 @@ qtests = {
'virtio-net-failover': files('migration-helpers.c'),
'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'),
'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'),
+ 'bcm2838-mbox-property-test' : files('bcm2838-mailbox.c'),
}
if vnc.found()
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 35/45] Add mailbox test stub
2023-12-08 2:31 ` [PATCH v4 35/45] Add mailbox test stub Sergey Kambalin
@ 2024-01-15 14:52 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:52 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:36, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> include/hw/arm/bcm2838_peripherals.h | 2 +
> tests/qtest/bcm2838-mailbox.c | 71 ++++++++++++++++++++++++++++
> tests/qtest/bcm2838-mailbox.h | 46 ++++++++++++++++++
> tests/qtest/meson.build | 1 +
> 4 files changed, 120 insertions(+)
> create mode 100644 tests/qtest/bcm2838-mailbox.c
> create mode 100644 tests/qtest/bcm2838-mailbox.h
>
> diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
> index cdeb892f04..2b97e55048 100644
> --- a/include/hw/arm/bcm2838_peripherals.h
> +++ b/include/hw/arm/bcm2838_peripherals.h
> @@ -56,6 +56,8 @@
> #define BCM2838_MPHI_OFFSET 0xb200
> #define BCM2838_MPHI_SIZE 0x200
>
> +#define GENET_OFFSET 0x1580000
> +
> #define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
> OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
> BCM2838_PERIPHERALS)
This change looks like it should have been in some other patch
(also it's the second define of GENET_OFFSET I think).
> diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
> new file mode 100644
> index 0000000000..2edc24e15e
> --- /dev/null
> +++ b/tests/qtest/bcm2838-mailbox.c
> @@ -0,0 +1,71 @@
> +/*
> + * Helper functions to work with BCM2838 mailbox via qtest interface.
> + *
> + * Copyright (c) 2023 Auriga LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/registerfields.h"
> +#include "libqtest-single.h"
> +#include "bcm2838-mailbox.h"
> +
> +
> +static uint32_t qtest_mbox0_read_reg32(QTestState *s, uint32_t offset)
> +{
> + return qtest_readl(s, MBOX0_BASE + offset);
> +}
> +
> +static void qtest_mbox1_write_reg32(QTestState *s, uint32_t offset, uint32_t value)
> +{
> + return qtest_writel(s, MBOX1_BASE + offset, value);
> +}
> +
> +static void qtest_mbox1_write(QTestState *s, uint8_t channel, uint32_t data)
> +{
> + uint32_t reg;
> +
> + reg = FIELD_DP32(reg, MBOX_WRITE_REG, CHANNEL, channel);
> + reg = FIELD_DP32(reg, MBOX_WRITE_REG, DATA, data);
> + qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, reg);
> +}
> +
> +int qtest_mbox0_has_data(QTestState *s) {
> + return !(qtest_mbox0_read_reg32(s, MBOX_REG_STATUS) & MBOX_READ_EMPTY);
> +}
> +
> +int mbox0_has_data(void) {
> + return qtest_mbox0_has_data(global_qtest);
> +}
> +
> +void qtest_mbox0_read_message(QTestState *s,
> + uint8_t channel,
> + void *msgbuf,
> + size_t msgbuf_size)
> +{
> + uint32_t reg;
> + uint32_t msgaddr;
> +
> + g_assert(qtest_mbox0_has_data(s));
> + reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
> + g_assert_cmphex(FIELD_EX32(reg, MBOX_WRITE_REG, CHANNEL), ==, channel);
> + msgaddr = FIELD_EX32(reg, MBOX_WRITE_REG, DATA) << 4;
> + qtest_memread(s, msgaddr, msgbuf, msgbuf_size);
> +}
> +
> +void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size) {
> + qtest_mbox0_read_message(global_qtest, channel, msgbuf, msgbuf_size);
> +}
> +
> +void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr)
> +{
> + qtest_mbox1_write(s, channel, msg_addr >> 4);
> +}
> +
> +
> +void mbox1_write_message(uint8_t channel, uint32_t msg_addr)
> +{
> + qtest_mbox1_write_message(global_qtest, channel, msg_addr);
> +}
> diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
> new file mode 100644
> index 0000000000..1d02ca9c2c
> --- /dev/null
> +++ b/tests/qtest/bcm2838-mailbox.h
> @@ -0,0 +1,46 @@
> +/*
> + * Declarations for BCM2838 mailbox test.
> + *
> + * Copyright (c) 2023 Auriga LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +
> +REG32(MBOX_WRITE_REG, 0)
> +FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
> +FIELD(MBOX_WRITE_REG, DATA, 4, 28)
> +
> +REG32(MBOX_SIZE_STAT, 0)
> +FIELD(MBOX_WRITE_REG, SIZE, 0, 30)
> +FIELD(MBOX_WRITE_REG, SUCCESS, 30, 1)
> +
> +typedef struct {
> + uint32_t size;
> + uint32_t req_resp_code;
> +} MboxBufHeader;
> +
> +#define DECLARE_TAG_TYPE(TypeName, RequestValueType, ResponseValueType) \
> +typedef struct { \
> + uint32_t id; \
> + uint32_t value_buffer_size; \
> + union { \
> + struct { \
> + uint32_t zero; \
> + RequestValueType value; \
> + } request; \
> + struct { \
> + uint32_t size_stat; \
> + ResponseValueType value; \
> + } response; \
> + }; \
> +} TypeName
> +
> +
> +int mbox0_has_data(void);
> +void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size);
> +void mbox1_write_message(uint8_t channel, uint32_t msg_addr);
> +int qtest_mbox0_has_data(QTestState *s);
> +void qtest_mbox0_read_message(QTestState *s, uint8_t channel, void *msgbuf, size_t msgbuf_size);
> +void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr);
> diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
> index 47dabf91d0..92eba5ac99 100644
> --- a/tests/qtest/meson.build
> +++ b/tests/qtest/meson.build
> @@ -321,6 +321,7 @@ qtests = {
> 'virtio-net-failover': files('migration-helpers.c'),
> 'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'),
> 'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'),
> + 'bcm2838-mbox-property-test' : files('bcm2838-mailbox.c'),
Does this compile successfully at this point, given there's
no main() function in it yet ? If not, this should go later
in the patchset.
> }
>
> if vnc.found()
> --
> 2.34.1
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 36/45] Add mailbox test constants
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (34 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 35/45] Add mailbox test stub Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:55 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 37/45] Add mailbox tests tags. Part 1 Sergey Kambalin
` (10 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mailbox.h | 139 ++++++++++++++++++++++++++++++++++
1 file changed, 139 insertions(+)
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 1d02ca9c2c..8acc4bd2ff 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -7,6 +7,145 @@
* See the COPYING file in the top-level directory.
*/
+#define MBOX0_BASE 0xFE00B880
+#define MBOX1_BASE 0xFE00B8A0
+
+#define MBOX_REG_READ 0x00
+#define MBOX_REG_WRITE 0x00
+#define MBOX_REG_PEEK 0x10
+#define MBOX_REG_SENDER 0x14
+#define MBOX_REG_STATUS 0x18
+#define MBOX_REG_CONFIG 0x1C
+
+#define MBOX_READ_EMPTY 0x40000000
+
+#define MBOX_CHANNEL_ID_PROPERTY 8
+
+#define MBOX_PROCESS_REQUEST 0x00000000
+#define MBOX_SUCCESS 0x80000000
+#define MBOX_ERROR_PARSING_BUFFER 0x80000001
+
+#define TAG_END 0x00000000
+#define TAG_GET_FIRMWARE_REVISION 0x00000001
+#define TAG_GET_FIRMWARE_VARIANT 0x00000002
+#define TAG_GET_BOARD_REVISION 0x00010002
+#define TAG_GET_ARM_MEMORY 0x00010005
+#define TAG_GET_VC_MEMORY 0x00010006
+#define TAG_SET_DEVICE_POWER_STATE 0x00028001
+#define TAG_GET_CLOCK_STATE 0x00030001
+#define TAG_GET_CLOCK_RATE 0x00030002
+#define TAG_GET_MAX_CLOCK_RATE 0x00030004
+#define TAG_GET_MIN_CLOCK_RATE 0x00030007
+#define TAG_GET_CLOCKS 0x00010007
+#define TAG_GET_TEMPERATURE 0x00030006
+#define TAG_GET_MAX_TEMPERATURE 0x0003000a
+#define TAG_ALLOCATE_BUFFER 0x00040001
+#define TAG_RELEASE_FRAMEBUFFER 0x00048001
+#define TAG_BLANK_FRAMEBUFFER 0x00040002
+#define TAG_GET_FB_PHYS_WIDTH 0x00040003
+#define TAG_TEST_FB_PHYS_WIDTH 0x00044003
+#define TAG_SET_FB_PHYS_WIDTH 0x00048003
+#define TAG_GET_FB_VIRT_WIDTH 0x00040004
+#define TAG_TEST_FB_VIRT_WIDTH 0x00044004
+#define TAG_SET_FB_VIRT_WIDTH 0x00048004
+#define TAG_GET_FB_DEPTH 0x00040005
+#define TAG_TEST_FB_DEPTH 0x00044005
+#define TAG_SET_FB_DEPTH 0x00048005
+#define TAG_GET_PIXEL_ORDER 0x00040006
+#define TAG_TEST_PIXEL_ORDER 0x00044006
+#define TAG_SET_PIXEL_ORDER 0x00048006
+#define TAG_GET_FB_ALPHA_MODE 0x00040007
+#define TAG_TEST_FB_ALPHA_MODE 0x00044007
+#define TAG_SET_FB_ALPHA_MODE 0x00048007
+#define TAG_GET_PITCH 0x00040008
+#define TAG_SET_PITCH 0x00048008
+#define TAG_GET_VIRTUAL_OFFSET 0x00040009
+#define TAG_TEST_VIRTUAL_OFFSET 0x00044009
+#define TAG_SET_VIRTUAL_OFFSET 0x00048009
+#define TAG_GET_OVERSCAN 0x0004000a
+#define TAG_TEST_OVERSCAN 0x0004400a
+#define TAG_SET_OVERSCAN 0x0004800a
+#define TAG_SET_PALETTE 0x0004800b
+#define TAG_GET_COMMANDLINE 0x00050001
+#define TAG_GET_DMA_CHANNELS 0x00060001
+#define TAG_GET_THROTTLED 0x00030046
+#define TAG_GET_NUM_DISPLAYS 0x00040013
+#define TAG_GET_DISPLAY_SETTINGS 0x00040014
+#define TAG_GET_GPIO_CONFIG 0x00030043
+#define TAG_SET_GPIO_CONFIG 0x00038043
+#define TAG_GET_GPIO_STATE 0x00030041
+#define TAG_SET_GPIO_STATE 0x00038041
+#define TAG_INITIALIZE_VCHIQ 0x00048010
+
+#define BOARD_REVISION 11546898
+#define FIRMWARE_REVISION 346337
+#define FIRMWARE_VARIANT 0x77777777 /* TODO: Find the real value */
+
+#define ARM_MEMORY_BASE 0x00000000
+#define ARM_MEMORY_SIZE 0x3c000000
+#define VC_MEMORY_BASE 0x3c000000
+#define VC_MEMORY_SIZE 0x04000000
+#define VC_FB_BASE 0x3c100000
+#define VC_FB_SIZE 0x00096000
+
+#define CLOCK_ID_ROOT 0x00000000
+#define CLOCK_ID_EMMC 0x00000001
+#define CLOCK_ID_UART 0x00000002
+#define CLOCK_ID_ARM 0x00000003
+#define CLOCK_ID_CORE 0x00000004
+#define CLOCK_ID_UNDEFINED 0x12345678
+
+#define CLOCK_RATE_EMMC 50000000
+#define CLOCK_RATE_UART 3000000
+#define CLOCK_RATE_CORE 350000000
+#define CLOCK_RATE_ANY 700000000
+
+#define DEVICE_ID_SD_CARD 0x00000000
+#define DEVICE_ID_UART0 0x00000001
+#define DEVICE_ID_UART1 0x00000002
+#define DEVICE_ID_USB HCD 0x00000003
+#define DEVICE_ID_I2C0 0x00000004
+#define DEVICE_ID_I2C1 0x00000005
+#define DEVICE_ID_I2C2 0x00000006
+#define DEVICE_ID_SPI 0x00000007
+#define DEVICE_ID_CCP2TX 0x00000008
+#define DEVICE_ID_UNKNOWN_0 0x00000009
+#define DEVICE_ID_UNKNOWN_1 0x0000000a
+
+#define TEMPERATURE_ID_SOC 0x00000000
+
+#define TEMPERATURE_SOC 25000
+#define TEMPERATURE_SOC_MAX 99000
+
+#define ALIGN_4K 4096
+
+#define PIXEL_ORDER_BGR 0
+#define PIXEL_ORDER_RGB 1
+
+#define ALPHA_MODE_ENABLED 0
+#define ALPHA_MODE_REVERSED 1
+#define ALPHA_MODE_IGNORED 2
+
+#define GPIO_MASK 0x003c
+
+#define GPIO_0 0x00000080
+
+#define GPIO_DIRECTION_IN 0
+#define GPIO_DIRECTION_OUT 1
+
+#define GPIO_TERMINATION_DISABLED 0
+#define GPIO_TERMINATION_ENABLED 1
+
+#define GPIO_TERMINATION_PULLUP_DISABLED 0
+#define GPIO_TERMINATION_PULLUP_ENABLED 1
+
+#define GPIO_POLARITY_LOW 0
+#define GPIO_POLARITY_HIGH 1
+
+#define GPIO_STATE_DOWN 0
+
+/* Used to test stubs that don't perform actual work */
+#define DUMMY_VALUE 0x12345678
REG32(MBOX_WRITE_REG, 0)
FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 36/45] Add mailbox test constants
2023-12-08 2:31 ` [PATCH v4 36/45] Add mailbox test constants Sergey Kambalin
@ 2024-01-15 14:55 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:55 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:36, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> tests/qtest/bcm2838-mailbox.h | 139 ++++++++++++++++++++++++++++++++++
> 1 file changed, 139 insertions(+)
>
> diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
> index 1d02ca9c2c..8acc4bd2ff 100644
> --- a/tests/qtest/bcm2838-mailbox.h
> +++ b/tests/qtest/bcm2838-mailbox.h
> @@ -7,6 +7,145 @@
> * See the COPYING file in the top-level directory.
> */
>
> +#define MBOX0_BASE 0xFE00B880
> +#define MBOX1_BASE 0xFE00B8A0
> +
> +#define MBOX_REG_READ 0x00
> +#define MBOX_REG_WRITE 0x00
> +#define MBOX_REG_PEEK 0x10
> +#define MBOX_REG_SENDER 0x14
> +#define MBOX_REG_STATUS 0x18
> +#define MBOX_REG_CONFIG 0x1C
> +
> +#define MBOX_READ_EMPTY 0x40000000
> +
> +#define MBOX_CHANNEL_ID_PROPERTY 8
> +
> +#define MBOX_PROCESS_REQUEST 0x00000000
> +#define MBOX_SUCCESS 0x80000000
> +#define MBOX_ERROR_PARSING_BUFFER 0x80000001
> +
> +#define TAG_END 0x00000000
> +#define TAG_GET_FIRMWARE_REVISION 0x00000001
> +#define TAG_GET_FIRMWARE_VARIANT 0x00000002
> +#define TAG_GET_BOARD_REVISION 0x00010002
> +#define TAG_GET_ARM_MEMORY 0x00010005
> +#define TAG_GET_VC_MEMORY 0x00010006
> +#define TAG_SET_DEVICE_POWER_STATE 0x00028001
> +#define TAG_GET_CLOCK_STATE 0x00030001
> +#define TAG_GET_CLOCK_RATE 0x00030002
> +#define TAG_GET_MAX_CLOCK_RATE 0x00030004
> +#define TAG_GET_MIN_CLOCK_RATE 0x00030007
> +#define TAG_GET_CLOCKS 0x00010007
> +#define TAG_GET_TEMPERATURE 0x00030006
> +#define TAG_GET_MAX_TEMPERATURE 0x0003000a
> +#define TAG_ALLOCATE_BUFFER 0x00040001
> +#define TAG_RELEASE_FRAMEBUFFER 0x00048001
> +#define TAG_BLANK_FRAMEBUFFER 0x00040002
> +#define TAG_GET_FB_PHYS_WIDTH 0x00040003
> +#define TAG_TEST_FB_PHYS_WIDTH 0x00044003
> +#define TAG_SET_FB_PHYS_WIDTH 0x00048003
> +#define TAG_GET_FB_VIRT_WIDTH 0x00040004
> +#define TAG_TEST_FB_VIRT_WIDTH 0x00044004
> +#define TAG_SET_FB_VIRT_WIDTH 0x00048004
> +#define TAG_GET_FB_DEPTH 0x00040005
> +#define TAG_TEST_FB_DEPTH 0x00044005
> +#define TAG_SET_FB_DEPTH 0x00048005
> +#define TAG_GET_PIXEL_ORDER 0x00040006
> +#define TAG_TEST_PIXEL_ORDER 0x00044006
> +#define TAG_SET_PIXEL_ORDER 0x00048006
> +#define TAG_GET_FB_ALPHA_MODE 0x00040007
> +#define TAG_TEST_FB_ALPHA_MODE 0x00044007
> +#define TAG_SET_FB_ALPHA_MODE 0x00048007
> +#define TAG_GET_PITCH 0x00040008
> +#define TAG_SET_PITCH 0x00048008
> +#define TAG_GET_VIRTUAL_OFFSET 0x00040009
> +#define TAG_TEST_VIRTUAL_OFFSET 0x00044009
> +#define TAG_SET_VIRTUAL_OFFSET 0x00048009
> +#define TAG_GET_OVERSCAN 0x0004000a
> +#define TAG_TEST_OVERSCAN 0x0004400a
> +#define TAG_SET_OVERSCAN 0x0004800a
> +#define TAG_SET_PALETTE 0x0004800b
> +#define TAG_GET_COMMANDLINE 0x00050001
> +#define TAG_GET_DMA_CHANNELS 0x00060001
> +#define TAG_GET_THROTTLED 0x00030046
> +#define TAG_GET_NUM_DISPLAYS 0x00040013
> +#define TAG_GET_DISPLAY_SETTINGS 0x00040014
> +#define TAG_GET_GPIO_CONFIG 0x00030043
> +#define TAG_SET_GPIO_CONFIG 0x00038043
> +#define TAG_GET_GPIO_STATE 0x00030041
> +#define TAG_SET_GPIO_STATE 0x00038041
> +#define TAG_INITIALIZE_VCHIQ 0x00048010
We already have definitions for the tags in
include/hw/arm/raspberrypi-fw-defs.h so we can
use those instead of defining them over again.
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 37/45] Add mailbox tests tags. Part 1
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (35 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 36/45] Add mailbox test constants Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 14:58 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 38/45] Add mailbox tests tags. Part 2 Sergey Kambalin
` (9 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mailbox.h | 195 +++++++++++++++++++++++++++++++++-
1 file changed, 190 insertions(+), 5 deletions(-)
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 8acc4bd2ff..04472fe23d 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -147,13 +147,21 @@
/* Used to test stubs that don't perform actual work */
#define DUMMY_VALUE 0x12345678
-REG32(MBOX_WRITE_REG, 0)
+REG32(MBOX_WRITE_REG, 0)
FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
-FIELD(MBOX_WRITE_REG, DATA, 4, 28)
+FIELD(MBOX_WRITE_REG, DATA, 4, 28)
-REG32(MBOX_SIZE_STAT, 0)
-FIELD(MBOX_WRITE_REG, SIZE, 0, 30)
-FIELD(MBOX_WRITE_REG, SUCCESS, 30, 1)
+REG32(MBOX_SIZE_STAT, 0)
+FIELD(MBOX_SIZE_STAT, SIZE, 0, 30)
+FIELD(MBOX_SIZE_STAT, SUCCESS, 30, 1)
+
+REG32(SET_DEVICE_POWER_STATE_CMD, 0)
+FIELD(SET_DEVICE_POWER_STATE_CMD, EN, 0, 1)
+FIELD(SET_DEVICE_POWER_STATE_CMD, WAIT, 1, 1)
+
+REG32(GET_CLOCK_STATE_CMD, 0)
+FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
+FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
typedef struct {
uint32_t size;
@@ -176,6 +184,183 @@ typedef struct { \
}; \
} TypeName
+DECLARE_TAG_TYPE(TAG_GET_FIRMWARE_REVISION_t,
+ struct {},
+ struct {
+ uint32_t revision;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_FIRMWARE_VARIANT_t,
+ struct {},
+ struct {
+ uint32_t variant;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_BOARD_REVISION_t,
+ struct {},
+ struct {
+ uint32_t revision;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_ARM_MEMORY_t,
+ struct {},
+ struct {
+ uint32_t base;
+ uint32_t size;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_VC_MEMORY_t,
+ struct {},
+ struct {
+ uint32_t base;
+ uint32_t size;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_DEVICE_POWER_STATE_t,
+ struct {
+ uint32_t device_id;
+ uint32_t cmd;
+ },
+ struct {
+ uint32_t device_id;
+ uint32_t cmd;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_CLOCK_STATE_t,
+ struct {
+ uint32_t clock_id;
+ },
+ struct {
+ uint32_t clock_id;
+ uint32_t cmd;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_CLOCK_RATE_t,
+ struct {
+ uint32_t clock_id;
+ },
+ struct {
+ uint32_t clock_id;
+ uint32_t rate;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_MAX_CLOCK_RATE_t,
+ struct {
+ uint32_t clock_id;
+ },
+ struct {
+ uint32_t clock_id;
+ uint32_t rate;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_MIN_CLOCK_RATE_t,
+ struct {
+ uint32_t clock_id;
+ },
+ struct {
+ uint32_t clock_id;
+ uint32_t rate;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_CLOCKS_t,
+ struct {},
+ struct {
+ uint32_t root_clock;
+ uint32_t arm_clock;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_TEMPERATURE_t,
+ struct {
+ uint32_t temperature_id;
+ },
+ struct {
+ uint32_t temperature_id;
+ uint32_t temperature;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_MAX_TEMPERATURE_t,
+ struct {
+ uint32_t temperature_id;
+ },
+ struct {
+ uint32_t temperature_id;
+ uint32_t temperature;
+ });
+
+DECLARE_TAG_TYPE(TAG_ALLOCATE_BUFFER_t,
+ struct {
+ uint32_t alignment;
+ },
+ struct {
+ uint32_t base;
+ uint32_t size;
+ });
+
+DECLARE_TAG_TYPE(TAG_RELEASE_FRAMEBUFFER_t,
+ struct {},
+ struct {});
+
+DECLARE_TAG_TYPE(TAG_BLANK_FRAMEBUFFER_t,
+ struct {
+ uint32_t on;
+ },
+ struct {
+ uint32_t on;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_FB_PHYS_WIDTH_t,
+ struct {},
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_FB_PHYS_WIDTH_t,
+ struct {
+ uint32_t width;
+ uint32_t height;
+ },
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_FB_PHYS_WIDTH_t,
+ struct {
+ uint32_t width;
+ uint32_t height;
+ },
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_FB_VIRT_WIDTH_t,
+ struct {},
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_FB_VIRT_WIDTH_t,
+ struct {
+ uint32_t width;
+ uint32_t height;
+ },
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_FB_VIRT_WIDTH_t,
+ struct {
+ uint32_t width;
+ uint32_t height;
+ },
+ struct {
+ uint32_t width;
+ uint32_t height;
+ });
int mbox0_has_data(void);
void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size);
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 37/45] Add mailbox tests tags. Part 1
2023-12-08 2:31 ` [PATCH v4 37/45] Add mailbox tests tags. Part 1 Sergey Kambalin
@ 2024-01-15 14:58 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 14:58 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:38, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> tests/qtest/bcm2838-mailbox.h | 195 +++++++++++++++++++++++++++++++++-
> 1 file changed, 190 insertions(+), 5 deletions(-)
>
> diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
> index 8acc4bd2ff..04472fe23d 100644
> --- a/tests/qtest/bcm2838-mailbox.h
> +++ b/tests/qtest/bcm2838-mailbox.h
> @@ -147,13 +147,21 @@
> /* Used to test stubs that don't perform actual work */
> #define DUMMY_VALUE 0x12345678
>
> -REG32(MBOX_WRITE_REG, 0)
> +REG32(MBOX_WRITE_REG, 0)
> FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
> -FIELD(MBOX_WRITE_REG, DATA, 4, 28)
> +FIELD(MBOX_WRITE_REG, DATA, 4, 28)
I don't strongly care whether you like to line up the
macro argument fields or not, but please pick something
and stick to it, rather than doing it one way to start
and then making whitespace changes in a later patch.
> -REG32(MBOX_SIZE_STAT, 0)
> -FIELD(MBOX_WRITE_REG, SIZE, 0, 30)
> -FIELD(MBOX_WRITE_REG, SUCCESS, 30, 1)
> +REG32(MBOX_SIZE_STAT, 0)
> +FIELD(MBOX_SIZE_STAT, SIZE, 0, 30)
> +FIELD(MBOX_SIZE_STAT, SUCCESS, 30, 1)
> +
> +REG32(SET_DEVICE_POWER_STATE_CMD, 0)
> +FIELD(SET_DEVICE_POWER_STATE_CMD, EN, 0, 1)
> +FIELD(SET_DEVICE_POWER_STATE_CMD, WAIT, 1, 1)
> +
> +REG32(GET_CLOCK_STATE_CMD, 0)
> +FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
> +FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
>
> typedef struct {
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 38/45] Add mailbox tests tags. Part 2
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (36 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 37/45] Add mailbox tests tags. Part 1 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 39/45] Add mailbox tests tags. Part 3 Sergey Kambalin
` (8 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mailbox.h | 152 ++++++++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 04472fe23d..49668668da 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -362,6 +362,158 @@ DECLARE_TAG_TYPE(TAG_SET_FB_VIRT_WIDTH_t,
uint32_t height;
});
+DECLARE_TAG_TYPE(TAG_GET_FB_DEPTH_t,
+ struct {},
+ struct {
+ uint32_t bpp;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_FB_DEPTH_t,
+ struct {
+ uint32_t bpp;
+ },
+ struct {
+ uint32_t bpp;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_FB_DEPTH_t,
+ struct {
+ uint32_t bpp;
+ },
+ struct {
+ uint32_t bpp;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_PIXEL_ORDER_t,
+ struct {},
+ struct {
+ uint32_t pixel_order;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_PIXEL_ORDER_t,
+ struct {
+ uint32_t pixel_order;
+ },
+ struct {
+ uint32_t pixel_order;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_PIXEL_ORDER_t,
+ struct {
+ uint32_t pixel_order;
+ },
+ struct {
+ uint32_t pixel_order;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_FB_ALPHA_MODE_t,
+ struct {},
+ struct {
+ uint32_t alpha_mode;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_FB_ALPHA_MODE_t,
+ struct {
+ uint32_t alpha_mode;
+ },
+ struct {
+ uint32_t alpha_mode;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_FB_ALPHA_MODE_t,
+ struct {
+ uint32_t alpha_mode;
+ },
+ struct {
+ uint32_t alpha_mode;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_PITCH_t,
+ struct {},
+ struct {
+ uint32_t pitch;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_PITCH_t,
+ struct {
+ uint32_t pitch;
+ },
+ struct {});
+
+DECLARE_TAG_TYPE(TAG_GET_VIRTUAL_OFFSET_t,
+ struct {},
+ struct {
+ uint32_t x;
+ uint32_t y;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_VIRTUAL_OFFSET_t,
+ struct {
+ uint32_t x;
+ uint32_t y;
+ },
+ struct {
+ uint32_t x;
+ uint32_t y;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_VIRTUAL_OFFSET_t,
+ struct {
+ uint32_t x;
+ uint32_t y;
+ },
+ struct {
+ uint32_t x;
+ uint32_t y;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_OVERSCAN_t,
+ struct {},
+ struct {
+ uint32_t top;
+ uint32_t bottom;
+ uint32_t left;
+ uint32_t right;
+ });
+
+DECLARE_TAG_TYPE(TAG_TEST_OVERSCAN_t,
+ struct {
+ uint32_t top;
+ uint32_t bottom;
+ uint32_t left;
+ uint32_t right;
+ },
+ struct {
+ uint32_t top;
+ uint32_t bottom;
+ uint32_t left;
+ uint32_t right;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_OVERSCAN_t,
+ struct {
+ uint32_t top;
+ uint32_t bottom;
+ uint32_t left;
+ uint32_t right;
+ },
+ struct {
+ uint32_t top;
+ uint32_t bottom;
+ uint32_t left;
+ uint32_t right;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_COMMANDLINE_t,
+ struct {},
+ struct {});
+
+DECLARE_TAG_TYPE(TAG_GET_DMA_CHANNELS_t,
+ struct {},
+ struct {
+ uint32_t mask;
+ });
+
int mbox0_has_data(void);
void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size);
void mbox1_write_message(uint8_t channel, uint32_t msg_addr);
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 39/45] Add mailbox tests tags. Part 3
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (37 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 38/45] Add mailbox tests tags. Part 2 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 40/45] Add mailbox property tests. Part 1 Sergey Kambalin
` (7 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mailbox.h | 78 +++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 49668668da..2b140a5d32 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -514,6 +514,84 @@ DECLARE_TAG_TYPE(TAG_GET_DMA_CHANNELS_t,
uint32_t mask;
});
+DECLARE_TAG_TYPE(TAG_GET_THROTTLED_t,
+ struct {},
+ struct {
+ uint32_t throttled;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_NUM_DISPLAYS_t,
+ struct {},
+ struct {
+ uint32_t num_displays;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_DISPLAY_SETTINGS_t,
+ struct {},
+ struct {
+ uint32_t display_num;
+ uint32_t phys_width;
+ uint32_t phys_height;
+ uint32_t bpp;
+ uint16_t pitch;
+ uint32_t virt_width;
+ uint32_t virt_height;
+ uint16_t virt_width_offset;
+ uint32_t virt_height_offset;
+ uint32_t fb_bus_address_lo;
+ uint32_t fb_bus_address_hi;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_GPIO_CONFIG_t,
+ struct {
+ uint32_t gpio_num;
+ },
+ struct {
+ uint32_t zero;
+ uint32_t direction;
+ uint32_t polarity;
+ uint32_t term_en;
+ uint32_t term_pull_up;
+ });
+
+
+DECLARE_TAG_TYPE(TAG_SET_GPIO_CONFIG_t,
+ struct {
+ uint32_t gpio_num;
+ uint32_t direction;
+ uint32_t polarity;
+ uint32_t term_en;
+ uint32_t term_pull_up;
+ uint32_t state;
+ },
+ struct {
+ uint32_t zero;
+ });
+
+DECLARE_TAG_TYPE(TAG_GET_GPIO_STATE_t,
+ struct {
+ uint32_t gpio_num;
+ },
+ struct {
+ uint32_t zero;
+ uint32_t state;
+ });
+
+DECLARE_TAG_TYPE(TAG_SET_GPIO_STATE_t,
+ struct {
+ uint32_t gpio_num;
+ uint32_t state;
+ },
+ struct {
+ uint32_t zero;
+ });
+
+DECLARE_TAG_TYPE(TAG_INITIALIZE_VCHIQ_t,
+ struct {},
+ struct {
+ uint32_t zero;
+ });
+
int mbox0_has_data(void);
void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size);
void mbox1_write_message(uint8_t channel, uint32_t msg_addr);
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 40/45] Add mailbox property tests. Part 1
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (38 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 39/45] Add mailbox tests tags. Part 3 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 15:01 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 41/45] Add mailbox property tests. Part 2 Sergey Kambalin
` (6 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mailbox.c | 34 ++--
tests/qtest/bcm2838-mailbox.h | 18 +-
tests/qtest/bcm2838-mbox-property-test.c | 206 +++++++++++++++++++++++
tests/qtest/meson.build | 2 +-
4 files changed, 220 insertions(+), 40 deletions(-)
create mode 100644 tests/qtest/bcm2838-mbox-property-test.c
diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
index 2edc24e15e..4b160cd56c 100644
--- a/tests/qtest/bcm2838-mailbox.c
+++ b/tests/qtest/bcm2838-mailbox.c
@@ -12,6 +12,10 @@
#include "libqtest-single.h"
#include "bcm2838-mailbox.h"
+REG32(MBOX_EXCHNG_REG, 0)
+FIELD(MBOX_EXCHNG_REG, CHANNEL, 0, 4)
+FIELD(MBOX_EXCHNG_REG, DATA, 4, 28)
+
static uint32_t qtest_mbox0_read_reg32(QTestState *s, uint32_t offset)
{
@@ -25,47 +29,33 @@ static void qtest_mbox1_write_reg32(QTestState *s, uint32_t offset, uint32_t val
static void qtest_mbox1_write(QTestState *s, uint8_t channel, uint32_t data)
{
- uint32_t reg;
+ uint32_t mbox_reg = 0;
- reg = FIELD_DP32(reg, MBOX_WRITE_REG, CHANNEL, channel);
- reg = FIELD_DP32(reg, MBOX_WRITE_REG, DATA, data);
- qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, reg);
+ mbox_reg = FIELD_DP32(mbox_reg, MBOX_EXCHNG_REG, CHANNEL, channel);
+ mbox_reg = FIELD_DP32(mbox_reg, MBOX_EXCHNG_REG, DATA, data);
+ qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, mbox_reg);
}
int qtest_mbox0_has_data(QTestState *s) {
return !(qtest_mbox0_read_reg32(s, MBOX_REG_STATUS) & MBOX_READ_EMPTY);
}
-int mbox0_has_data(void) {
- return qtest_mbox0_has_data(global_qtest);
-}
-
void qtest_mbox0_read_message(QTestState *s,
uint8_t channel,
void *msgbuf,
size_t msgbuf_size)
{
- uint32_t reg;
+ uint32_t mbox_reg;
uint32_t msgaddr;
g_assert(qtest_mbox0_has_data(s));
- reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
- g_assert_cmphex(FIELD_EX32(reg, MBOX_WRITE_REG, CHANNEL), ==, channel);
- msgaddr = FIELD_EX32(reg, MBOX_WRITE_REG, DATA) << 4;
+ mbox_reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
+ g_assert_cmphex(FIELD_EX32(mbox_reg, MBOX_EXCHNG_REG, CHANNEL), ==, channel);
+ msgaddr = FIELD_EX32(mbox_reg, MBOX_EXCHNG_REG, DATA) << 4;
qtest_memread(s, msgaddr, msgbuf, msgbuf_size);
}
-void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size) {
- qtest_mbox0_read_message(global_qtest, channel, msgbuf, msgbuf_size);
-}
-
void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr)
{
qtest_mbox1_write(s, channel, msg_addr >> 4);
}
-
-
-void mbox1_write_message(uint8_t channel, uint32_t msg_addr)
-{
- qtest_mbox1_write_message(global_qtest, channel, msg_addr);
-}
diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
index 2b140a5d32..7e660e65a7 100644
--- a/tests/qtest/bcm2838-mailbox.h
+++ b/tests/qtest/bcm2838-mailbox.h
@@ -77,7 +77,7 @@
#define TAG_SET_GPIO_STATE 0x00038041
#define TAG_INITIALIZE_VCHIQ 0x00048010
-#define BOARD_REVISION 11546898
+#define BOARD_REVISION 0xB03115
#define FIRMWARE_REVISION 346337
#define FIRMWARE_VARIANT 0x77777777 /* TODO: Find the real value */
@@ -147,22 +147,6 @@
/* Used to test stubs that don't perform actual work */
#define DUMMY_VALUE 0x12345678
-REG32(MBOX_WRITE_REG, 0)
-FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
-FIELD(MBOX_WRITE_REG, DATA, 4, 28)
-
-REG32(MBOX_SIZE_STAT, 0)
-FIELD(MBOX_SIZE_STAT, SIZE, 0, 30)
-FIELD(MBOX_SIZE_STAT, SUCCESS, 30, 1)
-
-REG32(SET_DEVICE_POWER_STATE_CMD, 0)
-FIELD(SET_DEVICE_POWER_STATE_CMD, EN, 0, 1)
-FIELD(SET_DEVICE_POWER_STATE_CMD, WAIT, 1, 1)
-
-REG32(GET_CLOCK_STATE_CMD, 0)
-FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
-FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
-
typedef struct {
uint32_t size;
uint32_t req_resp_code;
diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
new file mode 100644
index 0000000000..80746dbb95
--- /dev/null
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -0,0 +1,206 @@
+/*
+ * Tests set for BCM2838 mailbox property interface.
+ *
+ * Copyright (c) 2022 Auriga
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/registerfields.h"
+#include "libqtest-single.h"
+#include "bcm2838-mailbox.h"
+
+REG32(MBOX_SIZE_STAT, 0)
+FIELD(MBOX_SIZE_STAT, SIZE, 0, 31)
+FIELD(MBOX_SIZE_STAT, SUCCESS, 31, 1)
+
+REG32(SET_DEVICE_POWER_STATE_CMD, 0)
+FIELD(SET_DEVICE_POWER_STATE_CMD, EN, 0, 1)
+FIELD(SET_DEVICE_POWER_STATE_CMD, WAIT, 1, 1)
+
+REG32(GET_CLOCK_STATE_CMD, 0)
+FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
+FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
+
+#define MBOX_TEST_MESSAGE_ADDRESS 0x10000000
+
+#define TEST_TAG(x) TAG_ ## x
+#define TEST_TAG_TYPE(x) TAG_##x##_t
+
+#define TEST_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _test
+
+#define SETUP_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _setup
+
+#define CHECK_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _spec_check
+
+#define DECLARE_TEST_CASE_SETUP(testname, ...) \
+ void SETUP_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag)
+
+/*----------------------------------------------------------------------------*/
+#define DECLARE_TEST_CASE(testname, ...) \
+ __attribute__((weak)) \
+ void SETUP_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag); \
+ static void CHECK_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) *tag); \
+ static void TEST_FN_NAME(testname, __VA_ARGS__)(void) { \
+ struct { \
+ MboxBufHeader header; \
+ TEST_TAG_TYPE(testname) tag; \
+ uint32_t end_tag; \
+ } mailbox_buffer = { 0 }; \
+ \
+ QTestState *qts = qtest_init("-machine raspi4b-2g"); \
+ \
+ mailbox_buffer.header.size = sizeof(mailbox_buffer); \
+ mailbox_buffer.header.req_resp_code = MBOX_PROCESS_REQUEST; \
+ \
+ mailbox_buffer.tag.id = TEST_TAG(testname); \
+ mailbox_buffer.tag.value_buffer_size = MAX( \
+ sizeof(mailbox_buffer.tag.request.value), \
+ sizeof(mailbox_buffer.tag.response.value)); \
+ mailbox_buffer.tag.request.zero = 0; \
+ \
+ mailbox_buffer.end_tag = TAG_END; \
+ \
+ if (SETUP_FN_NAME(testname, __VA_ARGS__)) { \
+ SETUP_FN_NAME(testname, __VA_ARGS__)(&mailbox_buffer.tag); \
+ } \
+ \
+ qtest_memwrite(qts, MBOX_TEST_MESSAGE_ADDRESS, \
+ &mailbox_buffer, sizeof(mailbox_buffer)); \
+ qtest_mbox1_write_message(qts, MBOX_CHANNEL_ID_PROPERTY, \
+ MBOX_TEST_MESSAGE_ADDRESS); \
+ \
+ qtest_mbox0_read_message(qts, MBOX_CHANNEL_ID_PROPERTY, \
+ &mailbox_buffer, sizeof(mailbox_buffer)); \
+ \
+ g_assert_cmphex(mailbox_buffer.header.req_resp_code, ==, MBOX_SUCCESS);\
+ \
+ g_assert_cmphex(mailbox_buffer.tag.id, ==, TEST_TAG(testname)); \
+ \
+ uint32_t size = FIELD_EX32(mailbox_buffer.tag.response.size_stat, \
+ MBOX_SIZE_STAT, SIZE); \
+ uint32_t success = FIELD_EX32(mailbox_buffer.tag.response.size_stat, \
+ MBOX_SIZE_STAT, SUCCESS); \
+ g_assert_cmpint(size, ==, sizeof(mailbox_buffer.tag.response.value)); \
+ g_assert_cmpint(success, ==, 1); \
+ \
+ CHECK_FN_NAME(testname, __VA_ARGS__)(&mailbox_buffer.tag); \
+ \
+ qtest_quit(qts); \
+ } \
+ static void CHECK_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag)
+
+/*----------------------------------------------------------------------------*/
+
+#define QTEST_ADD_TEST_CASE(testname, ...) \
+ qtest_add_func(stringify(/bcm2838/mbox/property/ \
+ TEST_FN_NAME(testname, __VA_ARGS__)-test), \
+ TEST_FN_NAME(testname, __VA_ARGS__))
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FIRMWARE_REVISION) {
+ g_assert_cmpint(tag->response.value.revision, ==, FIRMWARE_REVISION);
+}
+
+// /*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_BOARD_REVISION) {
+ g_assert_cmpint(tag->response.value.revision, ==, BOARD_REVISION);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_ARM_MEMORY) {
+ g_assert_cmphex(tag->response.value.base, ==, ARM_MEMORY_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, ARM_MEMORY_SIZE);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_VC_MEMORY) {
+ g_assert_cmphex(tag->response.value.base, ==, VC_MEMORY_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, VC_MEMORY_SIZE);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_DEVICE_POWER_STATE) {
+ uint32_t enabled =
+ FIELD_EX32(tag->response.value.cmd, SET_DEVICE_POWER_STATE_CMD, EN);
+ uint32_t wait =
+ FIELD_EX32(tag->response.value.cmd, SET_DEVICE_POWER_STATE_CMD, WAIT);
+ g_assert_cmphex(tag->response.value.device_id, ==, DEVICE_ID_UART0);
+ g_assert_cmpint(enabled, ==, 1);
+ g_assert_cmpint(wait, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_DEVICE_POWER_STATE) {
+ tag->request.value.device_id = DEVICE_ID_UART0;
+ tag->response.value.cmd =
+ FIELD_DP32(tag->response.value.cmd, SET_DEVICE_POWER_STATE_CMD, EN, 1);
+ tag->response.value.cmd =
+ FIELD_DP32(tag->response.value.cmd, SET_DEVICE_POWER_STATE_CMD, WAIT, 1);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_STATE) {
+ uint32_t enabled =
+ FIELD_EX32(tag->response.value.cmd, GET_CLOCK_STATE_CMD, EN);
+ uint32_t not_present =
+ FIELD_EX32(tag->response.value.cmd, GET_CLOCK_STATE_CMD, NPRES);
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(enabled, ==, 1);
+ g_assert_cmphex(not_present, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_STATE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+
+ QTEST_ADD_TEST_CASE(GET_FIRMWARE_REVISION);
+ QTEST_ADD_TEST_CASE(GET_BOARD_REVISION);
+ QTEST_ADD_TEST_CASE(GET_ARM_MEMORY);
+ QTEST_ADD_TEST_CASE(GET_VC_MEMORY);
+ QTEST_ADD_TEST_CASE(SET_DEVICE_POWER_STATE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_STATE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC);
+
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 92eba5ac99..2351e99fd5 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -217,7 +217,7 @@ qtests_aarch64 = \
['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_VERSAL') ? ['xlnx-canfd-test', 'xlnx-versal-trng-test'] : []) + \
- (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test', 'bcm2838-mbox-property-test'] : []) + \
(config_all.has_key('CONFIG_TCG') and \
config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \
['arm-cpu-features',
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 40/45] Add mailbox property tests. Part 1
2023-12-08 2:31 ` [PATCH v4 40/45] Add mailbox property tests. Part 1 Sergey Kambalin
@ 2024-01-15 15:01 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 15:01 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:35, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> tests/qtest/bcm2838-mailbox.c | 34 ++--
> tests/qtest/bcm2838-mailbox.h | 18 +-
> tests/qtest/bcm2838-mbox-property-test.c | 206 +++++++++++++++++++++++
> tests/qtest/meson.build | 2 +-
> 4 files changed, 220 insertions(+), 40 deletions(-)
> create mode 100644 tests/qtest/bcm2838-mbox-property-test.c
>
> diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
> index 2edc24e15e..4b160cd56c 100644
> --- a/tests/qtest/bcm2838-mailbox.c
> +++ b/tests/qtest/bcm2838-mailbox.c
> @@ -12,6 +12,10 @@
> #include "libqtest-single.h"
> #include "bcm2838-mailbox.h"
>
> +REG32(MBOX_EXCHNG_REG, 0)
> +FIELD(MBOX_EXCHNG_REG, CHANNEL, 0, 4)
> +FIELD(MBOX_EXCHNG_REG, DATA, 4, 28)
> +
>
> static uint32_t qtest_mbox0_read_reg32(QTestState *s, uint32_t offset)
> {
> @@ -25,47 +29,33 @@ static void qtest_mbox1_write_reg32(QTestState *s, uint32_t offset, uint32_t val
>
> static void qtest_mbox1_write(QTestState *s, uint8_t channel, uint32_t data)
> {
> - uint32_t reg;
> + uint32_t mbox_reg = 0;
>
> - reg = FIELD_DP32(reg, MBOX_WRITE_REG, CHANNEL, channel);
> - reg = FIELD_DP32(reg, MBOX_WRITE_REG, DATA, data);
> - qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, reg);
> + mbox_reg = FIELD_DP32(mbox_reg, MBOX_EXCHNG_REG, CHANNEL, channel);
> + mbox_reg = FIELD_DP32(mbox_reg, MBOX_EXCHNG_REG, DATA, data);
> + qtest_mbox1_write_reg32(s, MBOX_REG_WRITE, mbox_reg);
Why change the variable name? I don't mind which one you use,
but please pick something and stick to it.
> }
>
> int qtest_mbox0_has_data(QTestState *s) {
> return !(qtest_mbox0_read_reg32(s, MBOX_REG_STATUS) & MBOX_READ_EMPTY);
> }
>
> -int mbox0_has_data(void) {
> - return qtest_mbox0_has_data(global_qtest);
> -}
Why did we add this if we're now deleting it?
> -
> void qtest_mbox0_read_message(QTestState *s,
> uint8_t channel,
> void *msgbuf,
> size_t msgbuf_size)
> {
> - uint32_t reg;
> + uint32_t mbox_reg;
> uint32_t msgaddr;
>
> g_assert(qtest_mbox0_has_data(s));
> - reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
> - g_assert_cmphex(FIELD_EX32(reg, MBOX_WRITE_REG, CHANNEL), ==, channel);
> - msgaddr = FIELD_EX32(reg, MBOX_WRITE_REG, DATA) << 4;
> + mbox_reg = qtest_mbox0_read_reg32(s, MBOX_REG_READ);
> + g_assert_cmphex(FIELD_EX32(mbox_reg, MBOX_EXCHNG_REG, CHANNEL), ==, channel);
> + msgaddr = FIELD_EX32(mbox_reg, MBOX_EXCHNG_REG, DATA) << 4;
> qtest_memread(s, msgaddr, msgbuf, msgbuf_size);
> }
>
> -void mbox0_read_message(uint8_t channel, void *msgbuf, size_t msgbuf_size) {
> - qtest_mbox0_read_message(global_qtest, channel, msgbuf, msgbuf_size);
> -}
> -
> void qtest_mbox1_write_message(QTestState *s, uint8_t channel, uint32_t msg_addr)
> {
> qtest_mbox1_write(s, channel, msg_addr >> 4);
> }
> -
> -
> -void mbox1_write_message(uint8_t channel, uint32_t msg_addr)
> -{
> - qtest_mbox1_write_message(global_qtest, channel, msg_addr);
> -}
> diff --git a/tests/qtest/bcm2838-mailbox.h b/tests/qtest/bcm2838-mailbox.h
> index 2b140a5d32..7e660e65a7 100644
> --- a/tests/qtest/bcm2838-mailbox.h
> +++ b/tests/qtest/bcm2838-mailbox.h
> @@ -77,7 +77,7 @@
> #define TAG_SET_GPIO_STATE 0x00038041
> #define TAG_INITIALIZE_VCHIQ 0x00048010
>
> -#define BOARD_REVISION 11546898
> +#define BOARD_REVISION 0xB03115
This doesn't look like it should be here ?
> #define FIRMWARE_REVISION 346337
> #define FIRMWARE_VARIANT 0x77777777 /* TODO: Find the real value */
>
> @@ -147,22 +147,6 @@
> /* Used to test stubs that don't perform actual work */
> #define DUMMY_VALUE 0x12345678
>
> -REG32(MBOX_WRITE_REG, 0)
> -FIELD(MBOX_WRITE_REG, CHANNEL, 0, 4)
> -FIELD(MBOX_WRITE_REG, DATA, 4, 28)
> -
> -REG32(MBOX_SIZE_STAT, 0)
> -FIELD(MBOX_SIZE_STAT, SIZE, 0, 30)
> -FIELD(MBOX_SIZE_STAT, SUCCESS, 30, 1)
> -
> -REG32(SET_DEVICE_POWER_STATE_CMD, 0)
> -FIELD(SET_DEVICE_POWER_STATE_CMD, EN, 0, 1)
> -FIELD(SET_DEVICE_POWER_STATE_CMD, WAIT, 1, 1)
> -
> -REG32(GET_CLOCK_STATE_CMD, 0)
> -FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
> -FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
We only just added these in the previous patch ?
> -
> typedef struct {
> uint32_t size;
> uint32_t req_resp_code;
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 41/45] Add mailbox property tests. Part 2
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (39 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 40/45] Add mailbox property tests. Part 1 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 42/45] Add mailbox property tests. Part 3 Sergey Kambalin
` (5 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mbox-property-test.c | 196 ++++++++++++++++++++++-
1 file changed, 195 insertions(+), 1 deletion(-)
diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
index 80746dbb95..5322c563a0 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -49,7 +49,8 @@ FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
(TEST_TAG_TYPE(testname) * tag); \
static void CHECK_FN_NAME(testname, __VA_ARGS__) \
(TEST_TAG_TYPE(testname) *tag); \
- static void TEST_FN_NAME(testname, __VA_ARGS__)(void) { \
+ static void TEST_FN_NAME(testname, __VA_ARGS__)(void) \
+ { \
struct { \
MboxBufHeader header; \
TEST_TAG_TYPE(testname) tag; \
@@ -188,6 +189,179 @@ DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, EMMC) {
}
/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_TEMPERATURE) {
+ g_assert_cmphex(tag->response.value.temperature_id, ==, TEMPERATURE_ID_SOC);
+ g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC);
+}
+DECLARE_TEST_CASE_SETUP(GET_TEMPERATURE) {
+ tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_TEMPERATURE) {
+ g_assert_cmphex(tag->response.value.temperature_id, ==, TEMPERATURE_ID_SOC);
+ g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC_MAX);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_TEMPERATURE) {
+ tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(ALLOCATE_BUFFER) {
+ g_assert_cmphex(tag->response.value.base, ==, VC_FB_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, VC_FB_SIZE);
+}
+DECLARE_TEST_CASE_SETUP(ALLOCATE_BUFFER) {
+ tag->request.value.alignment = ALIGN_4K;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(RELEASE_FRAMEBUFFER) {
+ /* No special checks are needed for this test */
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(BLANK_FRAMEBUFFER) {
+ g_assert_cmphex(tag->response.value.on, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(BLANK_FRAMEBUFFER) {
+ tag->request.value.on = 0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_PHYS_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+ g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_PHYS_WIDTH) {
+ tag->request.value.width = DUMMY_VALUE;
+ tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL) {
+ g_assert_cmpint(tag->response.value.width, ==, 640);
+ g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_PHYS_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, 800);
+ g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_PHYS_WIDTH) {
+ tag->request.value.width = 800;
+ tag->request.value.height = 600;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_VIRT_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+ g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_VIRT_WIDTH) {
+ tag->request.value.width = DUMMY_VALUE;
+ tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL) {
+ g_assert_cmpint(tag->response.value.width, ==, 640);
+ g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_VIRT_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, 800);
+ g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_VIRT_WIDTH) {
+ tag->request.value.width = 800;
+ tag->request.value.height = 600;
+}
+
+//==============================================================================
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
@@ -201,6 +375,26 @@ int main(int argc, char **argv)
QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, EMMC);
QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC);
QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_TEMPERATURE);
+ QTEST_ADD_TEST_CASE(GET_MAX_TEMPERATURE);
+ QTEST_ADD_TEST_CASE(ALLOCATE_BUFFER);
+ QTEST_ADD_TEST_CASE(RELEASE_FRAMEBUFFER);
+ QTEST_ADD_TEST_CASE(BLANK_FRAMEBUFFER);
+ QTEST_ADD_TEST_CASE(TEST_FB_PHYS_WIDTH);
+ QTEST_ADD_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL);
+ QTEST_ADD_TEST_CASE(SET_FB_PHYS_WIDTH);
+ QTEST_ADD_TEST_CASE(TEST_FB_VIRT_WIDTH);
+ QTEST_ADD_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL);
+ QTEST_ADD_TEST_CASE(SET_FB_VIRT_WIDTH);
return g_test_run();
}
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 42/45] Add mailbox property tests. Part 3
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (40 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 41/45] Add mailbox property tests. Part 2 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 43/45] Add missed BCM2835 properties Sergey Kambalin
` (4 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mbox-property-test.c | 213 ++++++++++++++++++++++-
1 file changed, 212 insertions(+), 1 deletion(-)
diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
index 5322c563a0..1b4a2ed9cb 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -361,7 +361,194 @@ DECLARE_TEST_CASE_SETUP(SET_FB_VIRT_WIDTH) {
tag->request.value.height = 600;
}
-//==============================================================================
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_DEPTH) {
+ g_assert_cmpint(tag->response.value.bpp, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_DEPTH) {
+ tag->request.value.bpp = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_DEPTH) {
+ g_assert_cmpint(tag->response.value.bpp, ==, 16);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_DEPTH) {
+ g_assert_cmpint(tag->response.value.bpp, ==, 24);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_DEPTH) {
+ tag->request.value.bpp = 24;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_PIXEL_ORDER) {
+ g_assert_cmphex(tag->response.value.pixel_order, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_PIXEL_ORDER) {
+ tag->request.value.pixel_order = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_PIXEL_ORDER) {
+ g_assert_cmphex(tag->response.value.pixel_order, ==, PIXEL_ORDER_RGB);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_PIXEL_ORDER, BGR) {
+ g_assert_cmphex(tag->response.value.pixel_order, ==, PIXEL_ORDER_BGR);
+}
+DECLARE_TEST_CASE_SETUP(SET_PIXEL_ORDER, BGR) {
+ tag->request.value.pixel_order = PIXEL_ORDER_BGR;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_PIXEL_ORDER, RGB) {
+ g_assert_cmphex(tag->response.value.pixel_order, ==, PIXEL_ORDER_BGR);
+}
+DECLARE_TEST_CASE_SETUP(SET_PIXEL_ORDER, RGB) {
+ tag->request.value.pixel_order = PIXEL_ORDER_BGR;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_ALPHA_MODE) {
+ g_assert_cmphex(tag->response.value.alpha_mode, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_ALPHA_MODE) {
+ tag->request.value.alpha_mode = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_ALPHA_MODE) {
+ g_assert_cmphex(tag->response.value.alpha_mode, ==, ALPHA_MODE_IGNORED);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_ALPHA_MODE, ENABLED) {
+ g_assert_cmphex(tag->response.value.alpha_mode, ==, ALPHA_MODE_ENABLED);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_ALPHA_MODE, ENABLED) {
+ tag->request.value.alpha_mode = ALPHA_MODE_ENABLED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_ALPHA_MODE, REVERSED) {
+ g_assert_cmphex(tag->response.value.alpha_mode, ==, ALPHA_MODE_REVERSED);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_ALPHA_MODE, REVERSED) {
+ tag->request.value.alpha_mode = ALPHA_MODE_REVERSED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_ALPHA_MODE, IGNORED) {
+ g_assert_cmphex(tag->response.value.alpha_mode, ==, ALPHA_MODE_IGNORED);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_ALPHA_MODE, IGNORED) {
+ tag->request.value.alpha_mode = ALPHA_MODE_IGNORED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_PITCH) {
+ g_assert_cmpint(tag->response.value.pitch, ==, 1280);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_VIRTUAL_OFFSET) {
+ g_assert_cmpint(tag->response.value.x, ==, DUMMY_VALUE);
+ g_assert_cmpint(tag->response.value.y, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_VIRTUAL_OFFSET) {
+ tag->request.value.x = DUMMY_VALUE;
+ tag->request.value.y = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_VIRTUAL_OFFSET) {
+ g_assert_cmpint(tag->response.value.x, ==, 0);
+ g_assert_cmpint(tag->response.value.y, ==, 0);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_VIRTUAL_OFFSET, _0_) {
+ g_assert_cmpint(tag->response.value.x, ==, 0);
+ g_assert_cmpint(tag->response.value.y, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_VIRTUAL_OFFSET, _0_) {
+ tag->request.value.x = 0;
+ tag->request.value.y = 0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_VIRTUAL_OFFSET, _42_) {
+ g_assert_cmpint(tag->response.value.x, ==, 42);
+ g_assert_cmpint(tag->response.value.y, ==, 42);
+}
+DECLARE_TEST_CASE_SETUP(SET_VIRTUAL_OFFSET, _42_) {
+ tag->request.value.x = 42;
+ tag->request.value.y = 42;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_OVERSCAN) {
+ g_assert_cmpint(tag->response.value.top, ==, 0);
+ g_assert_cmpint(tag->response.value.bottom, ==, 0);
+ g_assert_cmpint(tag->response.value.left, ==, 0);
+ g_assert_cmpint(tag->response.value.right, ==, 0);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_OVERSCAN) {
+ g_assert_cmpint(tag->response.value.top, ==, 0);
+ g_assert_cmpint(tag->response.value.bottom, ==, 0);
+ g_assert_cmpint(tag->response.value.left, ==, 0);
+ g_assert_cmpint(tag->response.value.right, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(TEST_OVERSCAN) {
+ tag->request.value.top = DUMMY_VALUE;
+ tag->request.value.bottom = DUMMY_VALUE;
+ tag->request.value.left = DUMMY_VALUE;
+ tag->request.value.right = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_OVERSCAN) {
+ g_assert_cmpint(tag->response.value.top, ==, 0);
+ g_assert_cmpint(tag->response.value.bottom, ==, 0);
+ g_assert_cmpint(tag->response.value.left, ==, 0);
+ g_assert_cmpint(tag->response.value.right, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_OVERSCAN) {
+ tag->request.value.top = DUMMY_VALUE;
+ tag->request.value.bottom = DUMMY_VALUE;
+ tag->request.value.left = DUMMY_VALUE;
+ tag->request.value.right = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_DMA_CHANNELS) {
+ g_assert_cmphex(tag->response.value.mask, ==, GPIO_MASK);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_COMMANDLINE) {
+ /* No special checks are needed for this test case */
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_NUM_DISPLAYS) {
+ g_assert_cmpint(tag->response.value.num_displays, ==, 1);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_PITCH) {
+ /* No special checks are needed for this test case */
+}
+DECLARE_TEST_CASE_SETUP(SET_PITCH) {
+ tag->request.value.pitch = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
@@ -395,6 +582,30 @@ int main(int argc, char **argv)
QTEST_ADD_TEST_CASE(TEST_FB_VIRT_WIDTH);
QTEST_ADD_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL);
QTEST_ADD_TEST_CASE(SET_FB_VIRT_WIDTH);
+ QTEST_ADD_TEST_CASE(TEST_FB_DEPTH);
+ QTEST_ADD_TEST_CASE(GET_FB_DEPTH);
+ QTEST_ADD_TEST_CASE(SET_FB_DEPTH);
+ QTEST_ADD_TEST_CASE(TEST_PIXEL_ORDER);
+ QTEST_ADD_TEST_CASE(GET_PIXEL_ORDER);
+ QTEST_ADD_TEST_CASE(SET_PIXEL_ORDER, BGR);
+ QTEST_ADD_TEST_CASE(SET_PIXEL_ORDER, RGB);
+ QTEST_ADD_TEST_CASE(TEST_FB_ALPHA_MODE);
+ QTEST_ADD_TEST_CASE(GET_FB_ALPHA_MODE);
+ QTEST_ADD_TEST_CASE(SET_FB_ALPHA_MODE, ENABLED);
+ QTEST_ADD_TEST_CASE(SET_FB_ALPHA_MODE, REVERSED);
+ QTEST_ADD_TEST_CASE(SET_FB_ALPHA_MODE, IGNORED);
+ QTEST_ADD_TEST_CASE(GET_PITCH);
+ QTEST_ADD_TEST_CASE(TEST_VIRTUAL_OFFSET);
+ QTEST_ADD_TEST_CASE(GET_VIRTUAL_OFFSET);
+ QTEST_ADD_TEST_CASE(SET_VIRTUAL_OFFSET, _0_);
+ QTEST_ADD_TEST_CASE(SET_VIRTUAL_OFFSET, _42_);
+ QTEST_ADD_TEST_CASE(GET_OVERSCAN);
+ QTEST_ADD_TEST_CASE(TEST_OVERSCAN);
+ QTEST_ADD_TEST_CASE(SET_OVERSCAN);
+ QTEST_ADD_TEST_CASE(GET_DMA_CHANNELS);
+ QTEST_ADD_TEST_CASE(GET_COMMANDLINE);
+ QTEST_ADD_TEST_CASE(GET_NUM_DISPLAYS);
+ QTEST_ADD_TEST_CASE(SET_PITCH);
return g_test_run();
}
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 43/45] Add missed BCM2835 properties
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (41 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 42/45] Add mailbox property tests. Part 3 Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 15:07 ` Peter Maydell
2023-12-08 2:31 ` [PATCH v4 44/45] Append added properties to mailbox test Sergey Kambalin
` (3 subsequent siblings)
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2835_property.c | 47 ++++++++++++++++++++++++++++
include/hw/arm/raspberrypi-fw-defs.h | 12 ++++++-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index ff55a4e2cd..dfeb793b3e 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -19,6 +19,9 @@
#include "trace.h"
#include "hw/arm/raspi_platform.h"
+#define RPI_EXP_GPIO_BASE 128
+#define VCHI_BUSADDR_SIZE sizeof(uint32_t)
+
/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
@@ -138,6 +141,13 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen = 8;
break;
+ case RPI_FWREQ_GET_CLOCKS:
+ /* TODO: add more clock IDs if needed */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_ARM_CLK_ID);
+ resplen = 8;
+ break;
+
case RPI_FWREQ_SET_CLOCK_RATE:
case RPI_FWREQ_SET_MAX_CLOCK_RATE:
case RPI_FWREQ_SET_MIN_CLOCK_RATE:
@@ -276,6 +286,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
stl_le_phys(&s->dma_as, value + 12, 0);
resplen = 4;
break;
+
case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS:
stl_le_phys(&s->dma_as, value + 12, 1);
resplen = 4;
@@ -301,6 +312,42 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen);
break;
+ case RPI_FWREQ_GET_THROTTLED:
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4;
+ break;
+
+ case RPI_FWREQ_FRAMEBUFFER_SET_PITCH:
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_FRAMEBUFFER_SET_PITCH "
+ "is not implemented\n");
+ break;
+
+ case RPI_FWREQ_GET_GPIO_CONFIG:
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_CONFIG "
+ "is not implemented\n");
+ break;
+
+ case RPI_FWREQ_SET_GPIO_CONFIG:
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_CONFIG "
+ "is not implemented\n");
+ break;
+
+ case RPI_FWREQ_GET_GPIO_STATE:
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_STATE "
+ "is not implemented\n");
+ break;
+
+ case RPI_FWREQ_SET_GPIO_STATE:
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_STATE "
+ "is not implemented\n");
+ break;
+
+ case RPI_FWREQ_VCHIQ_INIT:
+ stl_le_phys(&s->dma_as,
+ value + offsetof(rpi_firmware_prop_request_t, payload),
+ 0);
+ resplen = VCHI_BUSADDR_SIZE;
+ break;
default:
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: unhandled tag 0x%08x\n", tag);
diff --git a/include/hw/arm/raspberrypi-fw-defs.h b/include/hw/arm/raspberrypi-fw-defs.h
index 4551fe7450..ded7a22f02 100644
--- a/include/hw/arm/raspberrypi-fw-defs.h
+++ b/include/hw/arm/raspberrypi-fw-defs.h
@@ -101,7 +101,6 @@ enum rpi_firmware_property_tag {
RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016,
RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013,
RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013,
- RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014,
RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
@@ -160,4 +159,15 @@ enum rpi_firmware_clk_id {
RPI_FIRMWARE_NUM_CLK_ID,
};
+struct rpi_firmware_property_tag_header {
+ uint32_t tag;
+ uint32_t buf_size;
+ uint32_t req_resp_size;
+};
+
+typedef struct rpi_firmware_prop_request {
+ struct rpi_firmware_property_tag_header hdr;
+ uint8_t payload[0];
+} rpi_firmware_prop_request_t;
+
#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 43/45] Add missed BCM2835 properties
2023-12-08 2:31 ` [PATCH v4 43/45] Add missed BCM2835 properties Sergey Kambalin
@ 2024-01-15 15:07 ` Peter Maydell
0 siblings, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 15:07 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:36, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/misc/bcm2835_property.c | 47 ++++++++++++++++++++++++++++
> include/hw/arm/raspberrypi-fw-defs.h | 12 ++++++-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
> index ff55a4e2cd..dfeb793b3e 100644
> --- a/hw/misc/bcm2835_property.c
> +++ b/hw/misc/bcm2835_property.c
> @@ -19,6 +19,9 @@
> #include "trace.h"
> #include "hw/arm/raspi_platform.h"
>
> +#define RPI_EXP_GPIO_BASE 128
This define doesn't seem to be used in this patch.
> +#define VCHI_BUSADDR_SIZE sizeof(uint32_t)
> +
> /* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
>
> static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
> @@ -138,6 +141,13 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
> resplen = 8;
> break;
>
> + case RPI_FWREQ_GET_CLOCKS:
> + /* TODO: add more clock IDs if needed */
> + stl_le_phys(&s->dma_as, value + 12, 0);
> + stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_ARM_CLK_ID);
> + resplen = 8;
> + break;
> +
> case RPI_FWREQ_SET_CLOCK_RATE:
> case RPI_FWREQ_SET_MAX_CLOCK_RATE:
> case RPI_FWREQ_SET_MIN_CLOCK_RATE:
> @@ -276,6 +286,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
> stl_le_phys(&s->dma_as, value + 12, 0);
> resplen = 4;
> break;
> +
> case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS:
> stl_le_phys(&s->dma_as, value + 12, 1);
> resplen = 4;
> @@ -301,6 +312,42 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
> resplen);
> break;
>
> + case RPI_FWREQ_GET_THROTTLED:
> + stl_le_phys(&s->dma_as, value + 12, 0);
> + resplen = 4;
> + break;
> +
> + case RPI_FWREQ_FRAMEBUFFER_SET_PITCH:
> + qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_FRAMEBUFFER_SET_PITCH "
> + "is not implemented\n");
> + break;
> +
> + case RPI_FWREQ_GET_GPIO_CONFIG:
> + qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_CONFIG "
> + "is not implemented\n");
> + break;
> +
> + case RPI_FWREQ_SET_GPIO_CONFIG:
> + qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_CONFIG "
> + "is not implemented\n");
> + break;
> +
> + case RPI_FWREQ_GET_GPIO_STATE:
> + qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_STATE "
> + "is not implemented\n");
> + break;
> +
> + case RPI_FWREQ_SET_GPIO_STATE:
> + qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_STATE "
> + "is not implemented\n");
> + break;
These don't do anything that isn't already covered by the
"default" case. The only reason to have a case specifically
for an unimplemented property is for where we need to at least
get the response length correct to avoid the guest falling over.
You'll note that all the other LOG_UNIMP cases in this switch
set resplen.
> +
> + case RPI_FWREQ_VCHIQ_INIT:
> + stl_le_phys(&s->dma_as,
> + value + offsetof(rpi_firmware_prop_request_t, payload),
> + 0);
> + resplen = VCHI_BUSADDR_SIZE;
> + break;
> default:
> qemu_log_mask(LOG_UNIMP,
> "bcm2835_property: unhandled tag 0x%08x\n", tag);
> diff --git a/include/hw/arm/raspberrypi-fw-defs.h b/include/hw/arm/raspberrypi-fw-defs.h
> index 4551fe7450..ded7a22f02 100644
> --- a/include/hw/arm/raspberrypi-fw-defs.h
> +++ b/include/hw/arm/raspberrypi-fw-defs.h
> @@ -101,7 +101,6 @@ enum rpi_firmware_property_tag {
> RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016,
> RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013,
> RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013,
> - RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014,
Why do we delete this ?
> RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
> RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
> RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
> @@ -160,4 +159,15 @@ enum rpi_firmware_clk_id {
> RPI_FIRMWARE_NUM_CLK_ID,
> };
>
> +struct rpi_firmware_property_tag_header {
> + uint32_t tag;
> + uint32_t buf_size;
> + uint32_t req_resp_size;
> +};
> +
> +typedef struct rpi_firmware_prop_request {
> + struct rpi_firmware_property_tag_header hdr;
> + uint8_t payload[0];
> +} rpi_firmware_prop_request_t;
> +
> #endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH v4 44/45] Append added properties to mailbox test
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (42 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 43/45] Add missed BCM2835 properties Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2023-12-08 2:31 ` [PATCH v4 45/45] Add RPi4B to paspi4.rst Sergey Kambalin
` (2 subsequent siblings)
46 siblings, 0 replies; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mbox-property-test.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
index 1b4a2ed9cb..3a2e7f9194 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -269,6 +269,12 @@ DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, ANY) {
tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
}
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCKS) {
+ g_assert_cmphex(tag->response.value.root_clock, ==, CLOCK_ID_ROOT);
+ g_assert_cmphex(tag->response.value.arm_clock, ==, CLOCK_ID_ARM);
+}
+
/*----------------------------------------------------------------------------*/
DECLARE_TEST_CASE(GET_TEMPERATURE) {
g_assert_cmphex(tag->response.value.temperature_id, ==, TEMPERATURE_ID_SOC);
@@ -535,17 +541,19 @@ DECLARE_TEST_CASE(GET_COMMANDLINE) {
/* No special checks are needed for this test case */
}
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_THROTTLED) {
+ g_assert_cmpint(tag->response.value.throttled, ==, 0);
+}
+
/*----------------------------------------------------------------------------*/
DECLARE_TEST_CASE(GET_NUM_DISPLAYS) {
g_assert_cmpint(tag->response.value.num_displays, ==, 1);
}
/*----------------------------------------------------------------------------*/
-DECLARE_TEST_CASE(SET_PITCH) {
- /* No special checks are needed for this test case */
-}
-DECLARE_TEST_CASE_SETUP(SET_PITCH) {
- tag->request.value.pitch = DUMMY_VALUE;
+DECLARE_TEST_CASE(INITIALIZE_VCHIQ) {
+ g_assert_cmpint(tag->response.value.zero, ==, 0);
}
/*----------------------------------------------------------------------------*/
@@ -571,6 +579,7 @@ int main(int argc, char **argv)
QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, ANY);
QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, ANY);
QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_CLOCKS);
QTEST_ADD_TEST_CASE(GET_TEMPERATURE);
QTEST_ADD_TEST_CASE(GET_MAX_TEMPERATURE);
QTEST_ADD_TEST_CASE(ALLOCATE_BUFFER);
@@ -604,8 +613,9 @@ int main(int argc, char **argv)
QTEST_ADD_TEST_CASE(SET_OVERSCAN);
QTEST_ADD_TEST_CASE(GET_DMA_CHANNELS);
QTEST_ADD_TEST_CASE(GET_COMMANDLINE);
+ QTEST_ADD_TEST_CASE(GET_THROTTLED);
QTEST_ADD_TEST_CASE(GET_NUM_DISPLAYS);
- QTEST_ADD_TEST_CASE(SET_PITCH);
+ QTEST_ADD_TEST_CASE(INITIALIZE_VCHIQ);
return g_test_run();
}
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* [PATCH v4 45/45] Add RPi4B to paspi4.rst
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (43 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 44/45] Append added properties to mailbox test Sergey Kambalin
@ 2023-12-08 2:31 ` Sergey Kambalin
2024-01-15 15:02 ` Peter Maydell
2023-12-09 10:47 ` [PATCH v4 00/45] Raspberry Pi 4B machine Philippe Mathieu-Daudé
2023-12-19 16:11 ` Peter Maydell
46 siblings, 1 reply; 82+ messages in thread
From: Sergey Kambalin @ 2023-12-08 2:31 UTC (permalink / raw)
To: qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
docs/system/arm/raspi.rst | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/docs/system/arm/raspi.rst b/docs/system/arm/raspi.rst
index 922fe375a6..db9e0949ef 100644
--- a/docs/system/arm/raspi.rst
+++ b/docs/system/arm/raspi.rst
@@ -1,5 +1,5 @@
-Raspberry Pi boards (``raspi0``, ``raspi1ap``, ``raspi2b``, ``raspi3ap``, ``raspi3b``)
-======================================================================================
+Raspberry Pi boards (``raspi0``, ``raspi1ap``, ``raspi2b``, ``raspi3ap``, ``raspi3b``, ``raspi4b-2g``)
+======================================================================================================
QEMU provides models of the following Raspberry Pi boards:
@@ -12,12 +12,13 @@ QEMU provides models of the following Raspberry Pi boards:
Cortex-A53 (4 cores), 512 MiB of RAM
``raspi3b``
Cortex-A53 (4 cores), 1 GiB of RAM
-
+``raspi4b-2g``
+ Cortex-A72 (4 cores), 2 GiB of RAM
Implemented devices
-------------------
- * ARM1176JZF-S, Cortex-A7 or Cortex-A53 CPU
+ * ARM1176JZF-S, Cortex-A7, Cortex-A53 or Cortex-A72 CPU
* Interrupt controller
* DMA controller
* Clock and reset controller (CPRMAN)
@@ -33,6 +34,8 @@ Implemented devices
* USB2 host controller (DWC2 and MPHI)
* MailBox controller (MBOX)
* VideoCore firmware (property)
+ * PCIE Root Port (raspi4b-2g)
+ * GENET Ethernet Controller (raspi4b-2g)
Missing devices
--
2.34.1
^ permalink raw reply related [flat|nested] 82+ messages in thread* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (44 preceding siblings ...)
2023-12-08 2:31 ` [PATCH v4 45/45] Add RPi4B to paspi4.rst Sergey Kambalin
@ 2023-12-09 10:47 ` Philippe Mathieu-Daudé
2023-12-19 16:11 ` Peter Maydell
46 siblings, 0 replies; 82+ messages in thread
From: Philippe Mathieu-Daudé @ 2023-12-09 10:47 UTC (permalink / raw)
To: Sergey Kambalin, qemu-arm; +Cc: qemu-devel, Sergey Kambalin
Hi Sergey,
On 8/12/23 03:31, Sergey Kambalin wrote:
> Introducing Raspberry Pi 4B model.
> It contains new BCM2838 SoC, PCIE subsystem,
> RNG200, Thermal sensor and Genet network controller.
>
> It can work with recent linux kernels 6.x.x.
> Two avocado tests was added to check that.
>
> Unit tests has been made as read/write operations
> via mailbox properties.
>
> Genet integration test is under development.
>
> Every single commit
> 1) builds without errors
> 2) passes regression tests
> 3) passes style check*
> *the only exception is bcm2838-mbox-property-test.c file
> containing heavy macros usage which cause a lot of
> false-positives of checkpatch.pl.
>
> I did my best to keep the commits less than 200 changes,
> but had to make some of them a bit more in order to
> keep their integrity.
>
> This is v2 patchset with the most of v1 remarks fixed.
> I named it as 'v4' because of mistakes while attempts to send previous patchsets
> Please ignore all other v1...v3 patchsets except the very first one.
I really want to review your series, but I have been busy and
won't have time to look at it the next 2 weeks :/
Thanks Peter for reviewing the previous version :)
> Sergey Kambalin (45):
> Split out common part of BCM283X classes
> Split out common part of peripherals
> Split out raspi machine common part
> Introduce BCM2838 SoC
> Add GIC-400 to BCM2838 SoC
> Add BCM2838 GPIO stub
> Implement BCM2838 GPIO functionality
> Connect SD controller to BCM2838 GPIO
> Add GPIO and SD to BCM2838 periph
> Add BCM2838 checkpoint support
> Introduce Raspberry PI 4 machine
> Temporarily disable unimplemented rpi4b devices
> Add memory region for BCM2837 RPiVid ASB
> Add BCM2838 PCIE Root Complex
> Add BCM2838 PCIE host
> Enable BCM2838 PCIE
> Add RNG200 skeleton
> Add RNG200 RNG and RBG
> Get rid of RNG200 timer
> Implement BCM2838 thermal sensor
> Add clock_isp stub
> Add GENET stub
> Add GENET register structs. Part 1
> Add GENET register structs. Part 2
> Add GENET register structs. Part 3
> Add GENET register structs. Part 4
> Add GENET register access macros
> Implement GENET register ops
> Implement GENET MDIO
> Implement GENET TX path
> Implement GENET RX path
> Enable BCM2838 GENET controller
> Connect RNG200, PCIE and GENET to GIC
> Add Rpi4b boot tests
> Add mailbox test stub
> Add mailbox test constants
> Add mailbox tests tags. Part 1
> Add mailbox tests tags. Part 2
> Add mailbox tests tags. Part 3
> Add mailbox property tests. Part 1
> Add mailbox property tests. Part 2
> Add mailbox property tests. Part 3
> Add missed BCM2835 properties
> Append added properties to mailbox test
> Add RPi4B to paspi4.rst
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-08 2:31 [PATCH v4 00/45] Raspberry Pi 4B machine Sergey Kambalin
` (45 preceding siblings ...)
2023-12-09 10:47 ` [PATCH v4 00/45] Raspberry Pi 4B machine Philippe Mathieu-Daudé
@ 2023-12-19 16:11 ` Peter Maydell
2023-12-19 16:18 ` Kambalin, Sergey
2024-01-15 15:17 ` Peter Maydell
46 siblings, 2 replies; 82+ messages in thread
From: Peter Maydell @ 2023-12-19 16:11 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Fri, 8 Dec 2023 at 02:32, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Introducing Raspberry Pi 4B model.
> It contains new BCM2838 SoC, PCIE subsystem,
> RNG200, Thermal sensor and Genet network controller.
>
> It can work with recent linux kernels 6.x.x.
> Two avocado tests was added to check that.
>
> Unit tests has been made as read/write operations
> via mailbox properties.
>
> Genet integration test is under development.
>
> Every single commit
> 1) builds without errors
> 2) passes regression tests
> 3) passes style check*
> *the only exception is bcm2838-mbox-property-test.c file
> containing heavy macros usage which cause a lot of
> false-positives of checkpatch.pl.
>
> I did my best to keep the commits less than 200 changes,
> but had to make some of them a bit more in order to
> keep their integrity.
>
> This is v2 patchset with the most of v1 remarks fixed.
> I named it as 'v4' because of mistakes while attempts to send previous patchsets
> Please ignore all other v1...v3 patchsets except the very first one.
Thanks for the rework and resending these patches. As
you've probably seen, I've reviewed patches 1-10, but
I won't have time to do more than that before I break
for the holiday season now; I will get back to the
rest of the series in January.
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-19 16:11 ` Peter Maydell
@ 2023-12-19 16:18 ` Kambalin, Sergey
2023-12-19 16:39 ` Peter Maydell
2024-01-15 15:17 ` Peter Maydell
1 sibling, 1 reply; 82+ messages in thread
From: Kambalin, Sergey @ 2023-12-19 16:18 UTC (permalink / raw)
To: Peter Maydell, Sergey Kambalin; +Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org
[-- Attachment #1: Type: text/plain, Size: 1890 bytes --]
Thank you a lot for the review Peter!
May I kindly ask you to take just a brief look at the first patches of GENET? I'd like to know if I've chosen the right way to replace bitfields with QEMU REG32/FIELD32 macros.
Thanks,
Sergey Kambalin
Software Developer,
Auriga Inc.
________________________________
От: Peter Maydell <peter.maydell@linaro.org>
Отправлено: 19 декабря 2023 г. 10:11:43
Кому: Sergey Kambalin
Копия: qemu-arm@nongnu.org; qemu-devel@nongnu.org; Kambalin, Sergey
Тема: Re: [PATCH v4 00/45] Raspberry Pi 4B machine
On Fri, 8 Dec 2023 at 02:32, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Introducing Raspberry Pi 4B model.
> It contains new BCM2838 SoC, PCIE subsystem,
> RNG200, Thermal sensor and Genet network controller.
>
> It can work with recent linux kernels 6.x.x.
> Two avocado tests was added to check that.
>
> Unit tests has been made as read/write operations
> via mailbox properties.
>
> Genet integration test is under development.
>
> Every single commit
> 1) builds without errors
> 2) passes regression tests
> 3) passes style check*
> *the only exception is bcm2838-mbox-property-test.c file
> containing heavy macros usage which cause a lot of
> false-positives of checkpatch.pl.
>
> I did my best to keep the commits less than 200 changes,
> but had to make some of them a bit more in order to
> keep their integrity.
>
> This is v2 patchset with the most of v1 remarks fixed.
> I named it as 'v4' because of mistakes while attempts to send previous patchsets
> Please ignore all other v1...v3 patchsets except the very first one.
Thanks for the rework and resending these patches. As
you've probably seen, I've reviewed patches 1-10, but
I won't have time to do more than that before I break
for the holiday season now; I will get back to the
rest of the series in January.
-- PMM
[-- Attachment #2: Type: text/html, Size: 4738 bytes --]
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-19 16:18 ` Kambalin, Sergey
@ 2023-12-19 16:39 ` Peter Maydell
2023-12-19 17:07 ` Kambalin, Sergey
0 siblings, 1 reply; 82+ messages in thread
From: Peter Maydell @ 2023-12-19 16:39 UTC (permalink / raw)
To: Kambalin, Sergey
Cc: Sergey Kambalin, qemu-arm@nongnu.org, qemu-devel@nongnu.org
On Tue, 19 Dec 2023 at 16:18, Kambalin, Sergey
<sergey.kambalin@auriga.com> wrote:
>
> Thank you a lot for the review Peter!
>
>
> May I kindly ask you to take just a brief look at the first patches of GENET? I'd like to know if I've chosen the right way to replace bitfields with QEMU REG32/FIELD32 macros.
The FIELD and REG32 uses look mostly OK, but the
second argument to REG32() should not be 0 each time:
REG32(GENET_SYS_REV_CTRL, 0)
REG32(GENET_INTRL_0, 0)
etc. The idea is that that second argument is the offset
in the register file of the register; then the macro
defines you an A_GENET_SYS_REV_CTRL which is that value,
and you can use it as a case label in the "switch (offset) {"
in the read/write function.
I'm a also a bit confused about the use of offsetof() in patch 27.
In patch 28 the implementation of bcm2838_genet_read() and
bcm2838_genet_write() use a memcpy() between a local variable
and memory which I'm assuming is an index into one of these
register structs, which won't do the right thing if the host
is big-endian. If you need a "load/store N bytes to memory in
host order", we have ldn_he_p() and stn_he_p(); also available
in _le_ and _be_ flavours for load/store in specific endianness.
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-19 16:39 ` Peter Maydell
@ 2023-12-19 17:07 ` Kambalin, Sergey
0 siblings, 0 replies; 82+ messages in thread
From: Kambalin, Sergey @ 2023-12-19 17:07 UTC (permalink / raw)
To: Peter Maydell; +Cc: Sergey Kambalin, qemu-arm@nongnu.org, qemu-devel@nongnu.org
[-- Attachment #1: Type: text/plain, Size: 2047 bytes --]
Thanks!
I know about the 'offset' parameter, but in this particular case I use these structures as layouts only and don't 'switch' over them. So I decided to set the offsets to 0 in order to simplify the code.
And extra thanks for highlighting the potential issue with memcpy() 😊. I'll fix it in [v5] as well as the comments to first 10 patches.
Have a nice holidays!
Sergey Kambalin
Software Developer,
Auriga Inc.
________________________________
От: Peter Maydell <peter.maydell@linaro.org>
Отправлено: 19 декабря 2023 г. 10:39:13
Кому: Kambalin, Sergey
Копия: Sergey Kambalin; qemu-arm@nongnu.org; qemu-devel@nongnu.org
Тема: Re: [PATCH v4 00/45] Raspberry Pi 4B machine
On Tue, 19 Dec 2023 at 16:18, Kambalin, Sergey
<sergey.kambalin@auriga.com> wrote:
>
> Thank you a lot for the review Peter!
>
>
> May I kindly ask you to take just a brief look at the first patches of GENET? I'd like to know if I've chosen the right way to replace bitfields with QEMU REG32/FIELD32 macros.
The FIELD and REG32 uses look mostly OK, but the
second argument to REG32() should not be 0 each time:
REG32(GENET_SYS_REV_CTRL, 0)
REG32(GENET_INTRL_0, 0)
etc. The idea is that that second argument is the offset
in the register file of the register; then the macro
defines you an A_GENET_SYS_REV_CTRL which is that value,
and you can use it as a case label in the "switch (offset) {"
in the read/write function.
I'm a also a bit confused about the use of offsetof() in patch 27.
In patch 28 the implementation of bcm2838_genet_read() and
bcm2838_genet_write() use a memcpy() between a local variable
and memory which I'm assuming is an index into one of these
register structs, which won't do the right thing if the host
is big-endian. If you need a "load/store N bytes to memory in
host order", we have ldn_he_p() and stn_he_p(); also available
in _le_ and _be_ flavours for load/store in specific endianness.
thanks
-- PMM
[-- Attachment #2: Type: text/html, Size: 4442 bytes --]
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH v4 00/45] Raspberry Pi 4B machine
2023-12-19 16:11 ` Peter Maydell
2023-12-19 16:18 ` Kambalin, Sergey
@ 2024-01-15 15:17 ` Peter Maydell
1 sibling, 0 replies; 82+ messages in thread
From: Peter Maydell @ 2024-01-15 15:17 UTC (permalink / raw)
To: Sergey Kambalin; +Cc: qemu-arm, qemu-devel, Sergey Kambalin
On Tue, 19 Dec 2023 at 16:11, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> On Fri, 8 Dec 2023 at 02:32, Sergey Kambalin <serg.oker@gmail.com> wrote:
> >
> > Introducing Raspberry Pi 4B model.
> > It contains new BCM2838 SoC, PCIE subsystem,
> > RNG200, Thermal sensor and Genet network controller.
> >
> > It can work with recent linux kernels 6.x.x.
> > Two avocado tests was added to check that.
> >
> > Unit tests has been made as read/write operations
> > via mailbox properties.
> >
> > Genet integration test is under development.
> >
> > Every single commit
> > 1) builds without errors
> > 2) passes regression tests
> > 3) passes style check*
> > *the only exception is bcm2838-mbox-property-test.c file
> > containing heavy macros usage which cause a lot of
> > false-positives of checkpatch.pl.
> >
> > I did my best to keep the commits less than 200 changes,
> > but had to make some of them a bit more in order to
> > keep their integrity.
> >
> > This is v2 patchset with the most of v1 remarks fixed.
> > I named it as 'v4' because of mistakes while attempts to send previous patchsets
> > Please ignore all other v1...v3 patchsets except the very first one.
>
> Thanks for the rework and resending these patches. As
> you've probably seen, I've reviewed patches 1-10, but
> I won't have time to do more than that before I break
> for the holiday season now; I will get back to the
> rest of the series in January.
I'm now done with my review of this v4. I haven't left
comments on every patch, but I have read through the others
(including the ethernet controller ones) and I didn't see
anything obviously wrong beyond what we've already
discussed in this thread. I'll do a more full review
for v5.
thanks
-- PMM
^ permalink raw reply [flat|nested] 82+ messages in thread