* [PULL 01/12] hw/gpio/aspeed_gpio: Avoid shift into sign bit
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
@ 2024-09-16 18:56 ` Cédric Le Goater
2024-09-16 18:56 ` [PULL 02/12] hw/i2c/aspeed: Support discontinuous register memory region of I2C bus Cédric Le Goater
` (11 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Peter Maydell, Cédric Le Goater
From: Peter Maydell <peter.maydell@linaro.org>
In aspeed_gpio_update() we calculate "mask = 1 << gpio", where
gpio can be between 0 and 31. Coverity complains about this
because 1 << 31 won't fit in a signed integer.
For QEMU this isn't an error because we enable -fwrapv,
but we can keep Coverity happy by doing the shift on
unsigned numbers.
Resolves: Coverity CID 1547742
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/gpio/aspeed_gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index 3e7b35cf4f54..71756664dd69 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -281,7 +281,7 @@ static void aspeed_gpio_update(AspeedGPIOState *s, GPIOSets *regs,
diff &= mode_mask;
if (diff) {
for (gpio = 0; gpio < ASPEED_GPIOS_PER_SET; gpio++) {
- uint32_t mask = 1 << gpio;
+ uint32_t mask = 1U << gpio;
/* If the gpio needs to be updated... */
if (!(diff & mask)) {
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 02/12] hw/i2c/aspeed: Support discontinuous register memory region of I2C bus
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
2024-09-16 18:56 ` [PULL 01/12] hw/gpio/aspeed_gpio: Avoid shift into sign bit Cédric Le Goater
@ 2024-09-16 18:56 ` Cédric Le Goater
2024-09-16 18:56 ` [PULL 03/12] hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus Cédric Le Goater
` (10 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.
Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15
Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i2c/aspeed_i2c.h | 1 +
hw/i2c/aspeed_i2c.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index fad5e9259a51..02ede859067e 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -275,6 +275,7 @@ struct AspeedI2CClass {
uint8_t num_busses;
uint8_t reg_size;
+ uint32_t reg_gap_size;
uint8_t gap;
qemu_irq (*bus_get_irq)(AspeedI2CBus *);
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index f19891371426..ee30243c25f9 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -1012,6 +1012,7 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedI2CState *s = ASPEED_I2C(dev);
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
+ uint32_t reg_offset = aic->reg_size + aic->reg_gap_size;
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s,
@@ -1034,7 +1035,7 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
return;
}
- memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset),
+ memory_region_add_subregion(&s->iomem, reg_offset * (i + offset),
&s->busses[i].mr);
}
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 03/12] hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
2024-09-16 18:56 ` [PULL 01/12] hw/gpio/aspeed_gpio: Avoid shift into sign bit Cédric Le Goater
2024-09-16 18:56 ` [PULL 02/12] hw/i2c/aspeed: Support discontinuous register memory region of I2C bus Cédric Le Goater
@ 2024-09-16 18:56 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 04/12] hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus Cédric Le Goater
` (9 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.
To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.
Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.
Incrementing the version of aspeed_i2c_bus_vmstate to 6.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i2c/aspeed_i2c.h | 4 ++
hw/i2c/aspeed_i2c.c | 131 +++++++++++++++++++++++++++++++-----
2 files changed, 117 insertions(+), 18 deletions(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index 02ede859067e..8e62ec64f835 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -35,6 +35,7 @@ OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
#define ASPEED_I2C_NR_BUSSES 16
#define ASPEED_I2C_SHARE_POOL_SIZE 0x800
+#define ASPEED_I2C_BUS_POOL_SIZE 0x20
#define ASPEED_I2C_OLD_NUM_REG 11
#define ASPEED_I2C_NEW_NUM_REG 22
@@ -239,12 +240,14 @@ struct AspeedI2CBus {
I2CSlave *slave;
MemoryRegion mr;
+ MemoryRegion mr_pool;
I2CBus *bus;
uint8_t id;
qemu_irq irq;
uint32_t regs[ASPEED_I2C_NEW_NUM_REG];
+ uint8_t pool[ASPEED_I2C_BUS_POOL_SIZE];
};
struct AspeedI2CState {
@@ -284,6 +287,7 @@ struct AspeedI2CClass {
uint8_t *(*bus_pool_base)(AspeedI2CBus *);
bool check_sram;
bool has_dma;
+ bool has_share_pool;
uint64_t mem_size;
};
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index ee30243c25f9..819f70197369 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -941,12 +941,48 @@ static const MemoryRegionOps aspeed_i2c_share_pool_ops = {
},
};
+static uint64_t aspeed_i2c_bus_pool_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ AspeedI2CBus *s = opaque;
+ uint64_t ret = 0;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ ret |= (uint64_t) s->pool[offset + i] << (8 * i);
+ }
+
+ return ret;
+}
+
+static void aspeed_i2c_bus_pool_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ AspeedI2CBus *s = opaque;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ s->pool[offset + i] = (value >> (8 * i)) & 0xFF;
+ }
+}
+
+static const MemoryRegionOps aspeed_i2c_bus_pool_ops = {
+ .read = aspeed_i2c_bus_pool_read,
+ .write = aspeed_i2c_bus_pool_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
static const VMStateDescription aspeed_i2c_bus_vmstate = {
.name = TYPE_ASPEED_I2C,
- .version_id = 5,
- .minimum_version_id = 5,
+ .version_id = 6,
+ .minimum_version_id = 6,
.fields = (const VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedI2CBus, ASPEED_I2C_NEW_NUM_REG),
+ VMSTATE_UINT8_ARRAY(pool, AspeedI2CBus, ASPEED_I2C_BUS_POOL_SIZE),
VMSTATE_END_OF_LIST()
}
};
@@ -996,7 +1032,21 @@ static void aspeed_i2c_instance_init(Object *obj)
* 0x140 ... 0x17F: Device 5
* 0x180 ... 0x1BF: Device 6
* 0x1C0 ... 0x1FF: Device 7
- * 0x200 ... 0x2FF: Buffer Pool (AST2500 unused in linux driver)
+ * 0x200 ... 0x20F: Device 1 buffer (AST2500 unused in linux driver)
+ * 0x210 ... 0x21F: Device 2 buffer
+ * 0x220 ... 0x22F: Device 3 buffer
+ * 0x230 ... 0x23F: Device 4 buffer
+ * 0x240 ... 0x24F: Device 5 buffer
+ * 0x250 ... 0x25F: Device 6 buffer
+ * 0x260 ... 0x26F: Device 7 buffer
+ * 0x270 ... 0x27F: Device 8 buffer
+ * 0x280 ... 0x28F: Device 9 buffer
+ * 0x290 ... 0x29F: Device 10 buffer
+ * 0x2A0 ... 0x2AF: Device 11 buffer
+ * 0x2B0 ... 0x2BF: Device 12 buffer
+ * 0x2C0 ... 0x2CF: Device 13 buffer
+ * 0x2D0 ... 0x2DF: Device 14 buffer
+ * 0x2E0 ... 0x2FF: Reserved
* 0x300 ... 0x33F: Device 8
* 0x340 ... 0x37F: Device 9
* 0x380 ... 0x3BF: Device 10
@@ -1005,6 +1055,41 @@ static void aspeed_i2c_instance_init(Object *obj)
* 0x440 ... 0x47F: Device 13
* 0x480 ... 0x4BF: Device 14
* 0x800 ... 0xFFF: Buffer Pool (AST2400 unused in linux driver)
+ *
+ * Address Definitions (AST2600 and AST1030)
+ * 0x000 ... 0x07F: Global Register
+ * 0x080 ... 0x0FF: Device 1
+ * 0x100 ... 0x17F: Device 2
+ * 0x180 ... 0x1FF: Device 3
+ * 0x200 ... 0x27F: Device 4
+ * 0x280 ... 0x2FF: Device 5
+ * 0x300 ... 0x37F: Device 6
+ * 0x380 ... 0x3FF: Device 7
+ * 0x400 ... 0x47F: Device 8
+ * 0x480 ... 0x4FF: Device 9
+ * 0x500 ... 0x57F: Device 10
+ * 0x580 ... 0x5FF: Device 11
+ * 0x600 ... 0x67F: Device 12
+ * 0x680 ... 0x6FF: Device 13
+ * 0x700 ... 0x77F: Device 14
+ * 0x780 ... 0x7FF: Device 15 (15 and 16 unused in AST1030)
+ * 0x800 ... 0x87F: Device 16
+ * 0xC00 ... 0xC1F: Device 1 buffer
+ * 0xC20 ... 0xC3F: Device 2 buffer
+ * 0xC40 ... 0xC5F: Device 3 buffer
+ * 0xC60 ... 0xC7F: Device 4 buffer
+ * 0xC80 ... 0xC9F: Device 5 buffer
+ * 0xCA0 ... 0xCBF: Device 6 buffer
+ * 0xCC0 ... 0xCDF: Device 7 buffer
+ * 0xCE0 ... 0xCFF: Device 8 buffer
+ * 0xD00 ... 0xD1F: Device 9 buffer
+ * 0xD20 ... 0xD3F: Device 10 buffer
+ * 0xD40 ... 0xD5F: Device 11 buffer
+ * 0xD60 ... 0xD7F: Device 12 buffer
+ * 0xD80 ... 0xD9F: Device 13 buffer
+ * 0xDA0 ... 0xDBF: Device 14 buffer
+ * 0xDC0 ... 0xDDF: Device 15 buffer (15 and 16 unused in AST1030)
+ * 0xDE0 ... 0xDFF: Device 16 buffer
*/
static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
{
@@ -1039,10 +1124,19 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
&s->busses[i].mr);
}
- memory_region_init_io(&s->pool_iomem, OBJECT(s),
- &aspeed_i2c_share_pool_ops, s,
- "aspeed.i2c-share-pool", aic->pool_size);
- memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem);
+ if (aic->has_share_pool) {
+ memory_region_init_io(&s->pool_iomem, OBJECT(s),
+ &aspeed_i2c_share_pool_ops, s,
+ "aspeed.i2c-share-pool", aic->pool_size);
+ memory_region_add_subregion(&s->iomem, aic->pool_base,
+ &s->pool_iomem);
+ } else {
+ for (i = 0; i < aic->num_busses; i++) {
+ memory_region_add_subregion(&s->iomem,
+ aic->pool_base + (aic->pool_size * i),
+ &s->busses[i].mr_pool);
+ }
+ }
if (aic->has_dma) {
if (!s->dram_mr) {
@@ -1218,6 +1312,7 @@ static void aspeed_i2c_bus_realize(DeviceState *dev, Error **errp)
AspeedI2CBus *s = ASPEED_I2C_BUS(dev);
AspeedI2CClass *aic;
g_autofree char *name = g_strdup_printf(TYPE_ASPEED_I2C_BUS ".%d", s->id);
+ g_autofree char *pool_name = g_strdup_printf("%s.pool", name);
if (!s->controller) {
error_setg(errp, TYPE_ASPEED_I2C_BUS ": 'controller' link not set");
@@ -1235,6 +1330,10 @@ static void aspeed_i2c_bus_realize(DeviceState *dev, Error **errp)
memory_region_init_io(&s->mr, OBJECT(s), &aspeed_i2c_bus_ops,
s, name, aic->reg_size);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr);
+
+ memory_region_init_io(&s->mr_pool, OBJECT(s), &aspeed_i2c_bus_pool_ops,
+ s, pool_name, aic->pool_size);
+ sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr_pool);
}
static Property aspeed_i2c_bus_properties[] = {
@@ -1287,6 +1386,7 @@ static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data)
aic->reg_size = 0x40;
aic->gap = 7;
aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq;
+ aic->has_share_pool = true;
aic->pool_size = 0x800;
aic->pool_base = 0x800;
aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base;
@@ -1306,7 +1406,7 @@ static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus)
static uint8_t *aspeed_2500_i2c_bus_pool_base(AspeedI2CBus *bus)
{
- return &bus->controller->share_pool[bus->id * 0x10];
+ return bus->pool;
}
static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data)
@@ -1320,7 +1420,7 @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data)
aic->reg_size = 0x40;
aic->gap = 7;
aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq;
- aic->pool_size = 0x100;
+ aic->pool_size = 0x10;
aic->pool_base = 0x200;
aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
aic->check_sram = true;
@@ -1339,11 +1439,6 @@ static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus)
return bus->irq;
}
-static uint8_t *aspeed_2600_i2c_bus_pool_base(AspeedI2CBus *bus)
-{
- return &bus->controller->share_pool[bus->id * 0x20];
-}
-
static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@@ -1355,9 +1450,9 @@ static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data)
aic->reg_size = 0x80;
aic->gap = -1; /* no gap */
aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq;
- aic->pool_size = 0x200;
+ aic->pool_size = 0x20;
aic->pool_base = 0xC00;
- aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
+ aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
aic->has_dma = true;
aic->mem_size = 0x1000;
}
@@ -1379,9 +1474,9 @@ static void aspeed_1030_i2c_class_init(ObjectClass *klass, void *data)
aic->reg_size = 0x80;
aic->gap = -1; /* no gap */
aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq;
- aic->pool_size = 0x200;
+ aic->pool_size = 0x20;
aic->pool_base = 0xC00;
- aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
+ aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
aic->has_dma = true;
aic->mem_size = 0x10000;
}
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 04/12] hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (2 preceding siblings ...)
2024-09-16 18:56 ` [PULL 03/12] hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 05/12] hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus Cédric Le Goater
` (8 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.
Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer
Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i2c/aspeed_i2c.h | 1 +
hw/i2c/aspeed_i2c.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index 8e62ec64f835..b42c4dc5844b 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -284,6 +284,7 @@ struct AspeedI2CClass {
uint64_t pool_size;
hwaddr pool_base;
+ uint32_t pool_gap_size;
uint8_t *(*bus_pool_base)(AspeedI2CBus *);
bool check_sram;
bool has_dma;
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 819f70197369..9fb246ba009e 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -1098,6 +1098,7 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
AspeedI2CState *s = ASPEED_I2C(dev);
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
uint32_t reg_offset = aic->reg_size + aic->reg_gap_size;
+ uint32_t pool_offset = aic->pool_size + aic->pool_gap_size;
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s,
@@ -1133,7 +1134,7 @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
} else {
for (i = 0; i < aic->num_busses; i++) {
memory_region_add_subregion(&s->iomem,
- aic->pool_base + (aic->pool_size * i),
+ aic->pool_base + (pool_offset * i),
&s->busses[i].mr_pool);
}
}
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 05/12] hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (3 preceding siblings ...)
2024-09-16 18:57 ` [PULL 04/12] hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 06/12] hw/i2c/aspeed: Add AST2700 support Cédric Le Goater
` (7 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.
To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.
Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.
The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i2c/aspeed_i2c.h | 9 +------
hw/i2c/aspeed_i2c.c | 51 +++++++++++++++++++++++--------------
2 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index b42c4dc5844b..bdaea3207db2 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -248,6 +248,7 @@ struct AspeedI2CBus {
uint32_t regs[ASPEED_I2C_NEW_NUM_REG];
uint8_t pool[ASPEED_I2C_BUS_POOL_SIZE];
+ uint64_t dma_dram_offset;
};
struct AspeedI2CState {
@@ -369,14 +370,6 @@ static inline uint32_t aspeed_i2c_bus_dma_len_offset(AspeedI2CBus *bus)
return R_I2CD_DMA_LEN;
}
-static inline uint32_t aspeed_i2c_bus_dma_addr_offset(AspeedI2CBus *bus)
-{
- if (aspeed_i2c_is_new_mode(bus->controller)) {
- return R_I2CC_DMA_ADDR;
- }
- return R_I2CD_DMA_ADDR;
-}
-
static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus)
{
return SHARED_ARRAY_FIELD_EX32(bus->regs, aspeed_i2c_bus_ctrl_offset(bus),
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 9fb246ba009e..a17dd2526319 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -114,7 +114,10 @@ static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
if (!aic->has_dma) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__);
value = -1;
+ break;
}
+
+ value = extract64(bus->dma_dram_offset, 0, 32);
break;
case A_I2CD_DMA_LEN:
if (!aic->has_dma) {
@@ -150,9 +153,7 @@ static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
case A_I2CM_DMA_TX_ADDR:
case A_I2CM_DMA_RX_ADDR:
case A_I2CM_DMA_LEN_STS:
- case A_I2CC_DMA_ADDR:
case A_I2CC_DMA_LEN:
-
case A_I2CS_DEV_ADDR:
case A_I2CS_DMA_RX_ADDR:
case A_I2CS_DMA_LEN:
@@ -161,6 +162,9 @@ static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
case A_I2CS_DMA_LEN_STS:
/* Value is already set, don't do anything. */
break;
+ case A_I2CC_DMA_ADDR:
+ value = extract64(bus->dma_dram_offset, 0, 32);
+ break;
case A_I2CS_INTR_STS:
break;
case A_I2CM_CMD:
@@ -210,18 +214,18 @@ static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data)
{
MemTxResult result;
AspeedI2CState *s = bus->controller;
- uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
- result = address_space_read(&s->dram_as, bus->regs[reg_dma_addr],
+ result = address_space_read(&s->dram_as, bus->dma_dram_offset,
MEMTXATTRS_UNSPECIFIED, data, 1);
if (result != MEMTX_OK) {
- qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n",
- __func__, bus->regs[reg_dma_addr]);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: DRAM read failed @%" PRIx64 "\n",
+ __func__, bus->dma_dram_offset);
return -1;
}
- bus->regs[reg_dma_addr]++;
+ bus->dma_dram_offset++;
bus->regs[reg_dma_len]--;
return 0;
}
@@ -291,7 +295,6 @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
- uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
int pool_rx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
RX_SIZE) + 1;
@@ -323,14 +326,17 @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
data = i2c_recv(bus->bus);
trace_aspeed_i2c_bus_recv("DMA", bus->regs[reg_dma_len],
bus->regs[reg_dma_len], data);
- result = address_space_write(&s->dram_as, bus->regs[reg_dma_addr],
+
+ result = address_space_write(&s->dram_as, bus->dma_dram_offset,
MEMTXATTRS_UNSPECIFIED, &data, 1);
if (result != MEMTX_OK) {
- qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n",
- __func__, bus->regs[reg_dma_addr]);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: DRAM write failed @%" PRIx64 "\n",
+ __func__, bus->dma_dram_offset);
return;
}
- bus->regs[reg_dma_addr]++;
+
+ bus->dma_dram_offset++;
bus->regs[reg_dma_len]--;
/* In new mode, keep track of how many bytes we RXed */
if (aspeed_i2c_is_new_mode(bus->controller)) {
@@ -636,14 +642,18 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
case A_I2CM_DMA_TX_ADDR:
bus->regs[R_I2CM_DMA_TX_ADDR] = FIELD_EX32(value, I2CM_DMA_TX_ADDR,
ADDR);
- bus->regs[R_I2CC_DMA_ADDR] = FIELD_EX32(value, I2CM_DMA_TX_ADDR, ADDR);
+ bus->dma_dram_offset =
+ deposit64(bus->dma_dram_offset, 0, 32,
+ FIELD_EX32(value, I2CM_DMA_TX_ADDR, ADDR));
bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
TX_BUF_LEN) + 1;
break;
case A_I2CM_DMA_RX_ADDR:
bus->regs[R_I2CM_DMA_RX_ADDR] = FIELD_EX32(value, I2CM_DMA_RX_ADDR,
ADDR);
- bus->regs[R_I2CC_DMA_ADDR] = FIELD_EX32(value, I2CM_DMA_RX_ADDR, ADDR);
+ bus->dma_dram_offset =
+ deposit64(bus->dma_dram_offset, 0, 32,
+ FIELD_EX32(value, I2CM_DMA_RX_ADDR, ADDR));
bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
RX_BUF_LEN) + 1;
break;
@@ -811,7 +821,8 @@ static void aspeed_i2c_bus_old_write(AspeedI2CBus *bus, hwaddr offset,
break;
}
- bus->regs[R_I2CD_DMA_ADDR] = value & 0x3ffffffc;
+ bus->dma_dram_offset = deposit64(bus->dma_dram_offset, 0, 32,
+ value & 0x3ffffffc);
break;
case A_I2CD_DMA_LEN:
@@ -983,6 +994,7 @@ static const VMStateDescription aspeed_i2c_bus_vmstate = {
.fields = (const VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedI2CBus, ASPEED_I2C_NEW_NUM_REG),
VMSTATE_UINT8_ARRAY(pool, AspeedI2CBus, ASPEED_I2C_BUS_POOL_SIZE),
+ VMSTATE_UINT64(dma_dram_offset, AspeedI2CBus),
VMSTATE_END_OF_LIST()
}
};
@@ -1188,8 +1200,9 @@ static int aspeed_i2c_bus_new_slave_event(AspeedI2CBus *bus,
return -1;
}
ARRAY_FIELD_DP32(bus->regs, I2CS_DMA_LEN_STS, RX_LEN, 0);
- bus->regs[R_I2CC_DMA_ADDR] =
- ARRAY_FIELD_EX32(bus->regs, I2CS_DMA_RX_ADDR, ADDR);
+ bus->dma_dram_offset =
+ deposit64(bus->dma_dram_offset, 0, 32,
+ ARRAY_FIELD_EX32(bus->regs, I2CS_DMA_RX_ADDR, ADDR));
bus->regs[R_I2CC_DMA_LEN] =
ARRAY_FIELD_EX32(bus->regs, I2CS_DMA_LEN, RX_BUF_LEN) + 1;
i2c_ack(bus->bus);
@@ -1255,10 +1268,10 @@ static int aspeed_i2c_bus_slave_event(I2CSlave *slave, enum i2c_event event)
static void aspeed_i2c_bus_new_slave_send_async(AspeedI2CBus *bus, uint8_t data)
{
assert(address_space_write(&bus->controller->dram_as,
- bus->regs[R_I2CC_DMA_ADDR],
+ bus->dma_dram_offset,
MEMTXATTRS_UNSPECIFIED, &data, 1) == MEMTX_OK);
- bus->regs[R_I2CC_DMA_ADDR]++;
+ bus->dma_dram_offset++;
bus->regs[R_I2CC_DMA_LEN]--;
ARRAY_FIELD_DP32(bus->regs, I2CS_DMA_LEN_STS, RX_LEN,
ARRAY_FIELD_EX32(bus->regs, I2CS_DMA_LEN_STS, RX_LEN) + 1);
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 06/12] hw/i2c/aspeed: Add AST2700 support
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (4 preceding siblings ...)
2024-09-16 18:57 ` [PULL 05/12] hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 07/12] hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses Cédric Le Goater
` (6 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.
Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.
An I2C controller registers owns 8KB address space.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i2c/aspeed_i2c.h | 1 +
hw/i2c/aspeed_i2c.c | 62 +++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index bdaea3207db2..4f23dc10c3e1 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -31,6 +31,7 @@
#define TYPE_ASPEED_2500_I2C TYPE_ASPEED_I2C "-ast2500"
#define TYPE_ASPEED_2600_I2C TYPE_ASPEED_I2C "-ast2600"
#define TYPE_ASPEED_1030_I2C TYPE_ASPEED_I2C "-ast1030"
+#define TYPE_ASPEED_2700_I2C TYPE_ASPEED_I2C "-ast2700"
OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
#define ASPEED_I2C_NR_BUSSES 16
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index a17dd2526319..c61bafcb9ad4 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -1102,6 +1102,41 @@ static void aspeed_i2c_instance_init(Object *obj)
* 0xDA0 ... 0xDBF: Device 14 buffer
* 0xDC0 ... 0xDDF: Device 15 buffer (15 and 16 unused in AST1030)
* 0xDE0 ... 0xDFF: Device 16 buffer
+ *
+ * Address Definitions (AST2700)
+ * 0x000 ... 0x0FF: Global Register
+ * 0x100 ... 0x17F: Device 0
+ * 0x1A0 ... 0x1BF: Device 0 buffer
+ * 0x200 ... 0x27F: Device 1
+ * 0x2A0 ... 0x2BF: Device 1 buffer
+ * 0x300 ... 0x37F: Device 2
+ * 0x3A0 ... 0x3BF: Device 2 buffer
+ * 0x400 ... 0x47F: Device 3
+ * 0x4A0 ... 0x4BF: Device 3 buffer
+ * 0x500 ... 0x57F: Device 4
+ * 0x5A0 ... 0x5BF: Device 4 buffer
+ * 0x600 ... 0x67F: Device 5
+ * 0x6A0 ... 0x6BF: Device 5 buffer
+ * 0x700 ... 0x77F: Device 6
+ * 0x7A0 ... 0x7BF: Device 6 buffer
+ * 0x800 ... 0x87F: Device 7
+ * 0x8A0 ... 0x8BF: Device 7 buffer
+ * 0x900 ... 0x97F: Device 8
+ * 0x9A0 ... 0x9BF: Device 8 buffer
+ * 0xA00 ... 0xA7F: Device 9
+ * 0xAA0 ... 0xABF: Device 9 buffer
+ * 0xB00 ... 0xB7F: Device 10
+ * 0xBA0 ... 0xBBF: Device 10 buffer
+ * 0xC00 ... 0xC7F: Device 11
+ * 0xCA0 ... 0xCBF: Device 11 buffer
+ * 0xD00 ... 0xD7F: Device 12
+ * 0xDA0 ... 0xDBF: Device 12 buffer
+ * 0xE00 ... 0xE7F: Device 13
+ * 0xEA0 ... 0xEBF: Device 13 buffer
+ * 0xF00 ... 0xF7F: Device 14
+ * 0xFA0 ... 0xFBF: Device 14 buffer
+ * 0x1000 ... 0x107F: Device 15
+ * 0x10A0 ... 0x10BF: Device 15 buffer
*/
static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
{
@@ -1501,6 +1536,32 @@ static const TypeInfo aspeed_1030_i2c_info = {
.class_init = aspeed_1030_i2c_class_init,
};
+static void aspeed_2700_i2c_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 I2C Controller";
+
+ aic->num_busses = 16;
+ aic->reg_size = 0x80;
+ aic->reg_gap_size = 0x80;
+ aic->gap = -1; /* no gap */
+ aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq;
+ aic->pool_size = 0x20;
+ aic->pool_gap_size = 0xe0;
+ aic->pool_base = 0x1a0;
+ aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
+ aic->has_dma = true;
+ aic->mem_size = 0x2000;
+}
+
+static const TypeInfo aspeed_2700_i2c_info = {
+ .name = TYPE_ASPEED_2700_I2C,
+ .parent = TYPE_ASPEED_I2C,
+ .class_init = aspeed_2700_i2c_class_init,
+};
+
static void aspeed_i2c_register_types(void)
{
type_register_static(&aspeed_i2c_bus_info);
@@ -1510,6 +1571,7 @@ static void aspeed_i2c_register_types(void)
type_register_static(&aspeed_2500_i2c_info);
type_register_static(&aspeed_2600_i2c_info);
type_register_static(&aspeed_1030_i2c_info);
+ type_register_static(&aspeed_2700_i2c_info);
}
type_init(aspeed_i2c_register_types)
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 07/12] hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (5 preceding siblings ...)
2024-09-16 18:57 ` [PULL 06/12] hw/i2c/aspeed: Add AST2700 support Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 08/12] hw/i2c/aspeed: Add support for " Cédric Le Goater
` (5 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin
From: Jamin Lin <jamin_lin@aspeedtech.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.
It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.
Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.
Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.
The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
include/hw/i2c/aspeed_i2c.h | 12 +++++++++-
hw/i2c/aspeed_i2c.c | 48 +++++++++++++++++++++++++++++++++++++
2 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index 4f23dc10c3e1..2c4c81bd209d 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -38,7 +38,7 @@ OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
#define ASPEED_I2C_SHARE_POOL_SIZE 0x800
#define ASPEED_I2C_BUS_POOL_SIZE 0x20
#define ASPEED_I2C_OLD_NUM_REG 11
-#define ASPEED_I2C_NEW_NUM_REG 22
+#define ASPEED_I2C_NEW_NUM_REG 28
#define A_I2CD_M_STOP_CMD BIT(5)
#define A_I2CD_M_RX_CMD BIT(3)
@@ -227,6 +227,15 @@ REG32(I2CS_DMA_LEN_STS, 0x4c)
FIELD(I2CS_DMA_LEN_STS, TX_LEN, 0, 13)
REG32(I2CC_DMA_ADDR, 0x50)
REG32(I2CC_DMA_LEN, 0x54)
+/* DMA 64bits */
+REG32(I2CM_DMA_TX_ADDR_HI, 0x60)
+ FIELD(I2CM_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CM_DMA_RX_ADDR_HI, 0x64)
+ FIELD(I2CM_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CS_DMA_TX_ADDR_HI, 0x68)
+ FIELD(I2CS_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
+REG32(I2CS_DMA_RX_ADDR_HI, 0x6c)
+ FIELD(I2CS_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
struct AspeedI2CState;
@@ -292,6 +301,7 @@ struct AspeedI2CClass {
bool has_dma;
bool has_share_pool;
uint64_t mem_size;
+ bool has_dma64;
};
static inline bool aspeed_i2c_is_new_mode(AspeedI2CState *s)
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index c61bafcb9ad4..74aa5e0a160b 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -140,6 +140,7 @@ static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
unsigned size)
{
+ AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
uint64_t value = bus->regs[offset / sizeof(*bus->regs)];
switch (offset) {
@@ -170,6 +171,16 @@ static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
case A_I2CM_CMD:
value = SHARED_FIELD_DP32(value, BUS_BUSY_STS, i2c_bus_busy(bus->bus));
break;
+ case A_I2CM_DMA_TX_ADDR_HI:
+ case A_I2CM_DMA_RX_ADDR_HI:
+ case A_I2CS_DMA_TX_ADDR_HI:
+ case A_I2CS_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ value = -1;
+ }
+ break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
@@ -731,6 +742,42 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
qemu_log_mask(LOG_UNIMP, "%s: Slave mode DMA TX is not implemented\n",
__func__);
break;
+
+ case A_I2CM_DMA_TX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CM_DMA_TX_ADDR_HI] = FIELD_EX32(value,
+ I2CM_DMA_TX_ADDR_HI,
+ ADDR_HI);
+ break;
+ case A_I2CM_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CM_DMA_RX_ADDR_HI] = FIELD_EX32(value,
+ I2CM_DMA_RX_ADDR_HI,
+ ADDR_HI);
+ break;
+ case A_I2CS_DMA_TX_ADDR_HI:
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Slave mode DMA TX Addr high is not implemented\n",
+ __func__);
+ break;
+ case A_I2CS_DMA_RX_ADDR_HI:
+ if (!aic->has_dma64) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
+ __func__);
+ break;
+ }
+ bus->regs[R_I2CS_DMA_RX_ADDR_HI] = FIELD_EX32(value,
+ I2CS_DMA_RX_ADDR_HI,
+ ADDR_HI);
+ break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
@@ -1554,6 +1601,7 @@ static void aspeed_2700_i2c_class_init(ObjectClass *klass, void *data)
aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
aic->has_dma = true;
aic->mem_size = 0x2000;
+ aic->has_dma64 = true;
}
static const TypeInfo aspeed_2700_i2c_info = {
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 08/12] hw/i2c/aspeed: Add support for 64 bit addresses
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (6 preceding siblings ...)
2024-09-16 18:57 ` [PULL 07/12] hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 09/12] aspeed/soc: Introduce a new API to get the device irq Cédric Le Goater
` (4 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".
The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.
Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/i2c/aspeed_i2c.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 74aa5e0a160b..3ae22cb052d8 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -743,6 +743,14 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
__func__);
break;
+ /*
+ * The AST2700 support the maximum DRAM size is 8 GB.
+ * The DRAM offset range is from 0x0_0000_0000 to
+ * 0x1_FFFF_FFFF and it is enough to use bits [33:0]
+ * saving the dram offset.
+ * Therefore, save the high part physical address bit[1:0]
+ * of Tx/Rx buffer address as dma_dram_offset bit[33:32].
+ */
case A_I2CM_DMA_TX_ADDR_HI:
if (!aic->has_dma64) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
@@ -752,6 +760,8 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
bus->regs[R_I2CM_DMA_TX_ADDR_HI] = FIELD_EX32(value,
I2CM_DMA_TX_ADDR_HI,
ADDR_HI);
+ bus->dma_dram_offset = deposit64(bus->dma_dram_offset, 32, 32,
+ extract32(value, 0, 2));
break;
case A_I2CM_DMA_RX_ADDR_HI:
if (!aic->has_dma64) {
@@ -762,6 +772,8 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
bus->regs[R_I2CM_DMA_RX_ADDR_HI] = FIELD_EX32(value,
I2CM_DMA_RX_ADDR_HI,
ADDR_HI);
+ bus->dma_dram_offset = deposit64(bus->dma_dram_offset, 32, 32,
+ extract32(value, 0, 2));
break;
case A_I2CS_DMA_TX_ADDR_HI:
qemu_log_mask(LOG_UNIMP,
@@ -777,6 +789,8 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
bus->regs[R_I2CS_DMA_RX_ADDR_HI] = FIELD_EX32(value,
I2CS_DMA_RX_ADDR_HI,
ADDR_HI);
+ bus->dma_dram_offset = deposit64(bus->dma_dram_offset, 32, 32,
+ extract32(value, 0, 2));
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 09/12] aspeed/soc: Introduce a new API to get the device irq
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (7 preceding siblings ...)
2024-09-16 18:57 ` [PULL 08/12] hw/i2c/aspeed: Add support for " Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 10/12] aspeed/soc: Support I2C for AST2700 Cédric Le Goater
` (3 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Currently, users can set the INTC mapping table with
enumerated device id and device irq to get the INTC orgate
input pins. However, some devices use the continuous source numbers in the
same INTC orgate. To reduce the enumerated device id definition,
create a new API to get the INTC orgate input pin
if users only provide the device id with its bus number index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed_ast27x0.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 4257b5e8af82..a5eb78524f6a 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -193,6 +193,27 @@ static qemu_irq aspeed_soc_ast2700_get_irq(AspeedSoCState *s, int dev)
return qdev_get_gpio_in(DEVICE(&a->gic), sc->irqmap[dev]);
}
+static qemu_irq aspeed_soc_ast2700_get_irq_index(AspeedSoCState *s, int dev,
+ int index)
+{
+ Aspeed27x0SoCState *a = ASPEED27X0_SOC(s);
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aspeed_soc_ast2700_gic_intcmap); i++) {
+ if (sc->irqmap[dev] == aspeed_soc_ast2700_gic_intcmap[i].irq) {
+ assert(aspeed_soc_ast2700_gic_intcmap[i].ptr);
+ return qdev_get_gpio_in(DEVICE(&a->intc.orgates[i]),
+ aspeed_soc_ast2700_gic_intcmap[i].ptr[dev] + index);
+ }
+ }
+
+ /*
+ * Invalid orgate index, device irq should be 128 to 136.
+ */
+ g_assert_not_reached();
+}
+
static uint64_t aspeed_ram_capacity_read(void *opaque, hwaddr addr,
unsigned int size)
{
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 10/12] aspeed/soc: Support I2C for AST2700
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (8 preceding siblings ...)
2024-09-16 18:57 ` [PULL 09/12] aspeed/soc: Introduce a new API to get the device irq Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 11/12] aspeed: Add tmp105 in i2c bus 0 " Cédric Le Goater
` (2 subsequent siblings)
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Add I2C model for AST2700 I2C support.
The I2C controller registers base address is start at
0x14C0_F000 and its address space is 0x2000.
The AST2700 I2C controller has one source INTC per bus.
I2C buses interrupt are connected to GICINT130_INTC
from bit 0 to bit 15.
I2C bus 0 is connected to GICINT130_INTC at bit 0.
I2C bus 15 is connected to GICINT130_INTC at bit 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed_ast27x0.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index a5eb78524f6a..761ee116579c 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -61,6 +61,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_GIC_DIST] = 0x12200000,
[ASPEED_GIC_REDIST] = 0x12280000,
[ASPEED_DEV_ADC] = 0x14C00000,
+ [ASPEED_DEV_I2C] = 0x14C0F000,
};
#define AST2700_MAX_IRQ 288
@@ -369,6 +370,9 @@ static void aspeed_soc_ast2700_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.adc-%s", socname);
object_initialize_child(obj, "adc", &s->adc, typename);
+
+ snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname);
+ object_initialize_child(obj, "i2c", &s->i2c, typename);
}
/*
@@ -452,6 +456,7 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
AspeedINTCClass *ic = ASPEED_INTC_GET_CLASS(&a->intc);
g_autofree char *sram_name = NULL;
+ qemu_irq irq;
/* Default boot region (SPI memory or ROMs) */
memory_region_init(&s->spi_boot_container, OBJECT(s),
@@ -634,6 +639,25 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_ADC));
+ /* I2C */
+ object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
+ &error_abort);
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_DEV_I2C]);
+ for (i = 0; i < ASPEED_I2C_GET_CLASS(&s->i2c)->num_busses; i++) {
+ /*
+ * The AST2700 I2C controller has one source INTC per bus.
+ * I2C buses interrupt are connected to GICINT130_INTC
+ * from bit 0 to bit 15.
+ * I2C bus 0 is connected to GICINT130_INTC at bit 0.
+ * I2C bus 15 is connected to GICINT130_INTC at bit 15.
+ */
+ irq = aspeed_soc_ast2700_get_irq_index(s, ASPEED_DEV_I2C, i);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c.busses[i]), 0, irq);
+ }
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 11/12] aspeed: Add tmp105 in i2c bus 0 for AST2700
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (9 preceding siblings ...)
2024-09-16 18:57 ` [PULL 10/12] aspeed/soc: Support I2C for AST2700 Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-16 18:57 ` [PULL 12/12] machine_aspeed.py: Update to test I2C " Cédric Le Goater
2024-09-17 13:00 ` [PULL 00/12] aspeed queue Peter Maydell
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
ASPEED SDK add lm75 in i2c bus 0 for AST2700.
LM75 is compatible with TMP105 driver.
Introduce a new i2c init function and
add tmp105 device model in i2c bus 0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/aspeed.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index fd5603f7aa23..3d13b16768f7 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -1650,6 +1650,15 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
}
#ifdef TARGET_AARCH64
+static void ast2700_evb_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = bmc->soc;
+
+ /* LM75 is compatible with TMP105 driver */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0),
+ TYPE_TMP105, 0x4d);
+}
+
static void aspeed_machine_ast2700_evb_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -1664,6 +1673,7 @@ static void aspeed_machine_ast2700_evb_class_init(ObjectClass *oc, void *data)
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON;
amc->uart_default = ASPEED_DEV_UART12;
+ amc->i2c_init = ast2700_evb_i2c_init;
mc->default_ram_size = 1 * GiB;
aspeed_machine_class_init_cpus_defaults(mc);
}
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PULL 12/12] machine_aspeed.py: Update to test I2C for AST2700
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (10 preceding siblings ...)
2024-09-16 18:57 ` [PULL 11/12] aspeed: Add tmp105 in i2c bus 0 " Cédric Le Goater
@ 2024-09-16 18:57 ` Cédric Le Goater
2024-09-17 13:00 ` [PULL 00/12] aspeed queue Peter Maydell
12 siblings, 0 replies; 18+ messages in thread
From: Cédric Le Goater @ 2024-09-16 18:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Update test case to test lm75 temperature sensor.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
tests/avocado/machine_aspeed.py | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/tests/avocado/machine_aspeed.py b/tests/avocado/machine_aspeed.py
index c0b01e8f1fae..4e144bde9131 100644
--- a/tests/avocado/machine_aspeed.py
+++ b/tests/avocado/machine_aspeed.py
@@ -433,9 +433,25 @@ def test_aarch64_ast2700_evb_sdk_v09_02(self):
f'loader,addr=0x430000000,cpu-num={i}')
self.vm.add_args('-smp', str(num_cpu))
+ self.vm.add_args('-device',
+ 'tmp105,bus=aspeed.i2c.bus.1,address=0x4d,id=tmp-test')
self.do_test_aarch64_aspeed_sdk_start(image_dir + 'image-bmc')
self.wait_for_console_pattern('nodistro.0 ast2700-default ttyS12')
+
self.ssh_connect('root', '0penBmc', False)
+ self.ssh_command('dmesg -c > /dev/null')
+
+ self.ssh_command_output_contains(
+ 'echo lm75 0x4d > /sys/class/i2c-dev/i2c-1/device/new_device '
+ '&& dmesg -c',
+ 'i2c i2c-1: new_device: Instantiated device lm75 at 0x4d');
+
+ self.ssh_command_output_contains(
+ 'cat /sys/class/hwmon/hwmon20/temp1_input', '0')
+ self.vm.cmd('qom-set', path='/machine/peripheral/tmp-test',
+ property='temperature', value=18000)
+ self.ssh_command_output_contains(
+ 'cat /sys/class/hwmon/hwmon20/temp1_input', '18000')
class AST2x00MachineMMC(QemuSystemTest):
--
2.46.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PULL 00/12] aspeed queue
2024-09-16 18:56 [PULL 00/12] aspeed queue Cédric Le Goater
` (11 preceding siblings ...)
2024-09-16 18:57 ` [PULL 12/12] machine_aspeed.py: Update to test I2C " Cédric Le Goater
@ 2024-09-17 13:00 ` Peter Maydell
12 siblings, 0 replies; 18+ messages in thread
From: Peter Maydell @ 2024-09-17 13:00 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-arm, qemu-devel
On Mon, 16 Sept 2024 at 19:58, Cédric Le Goater <clg@redhat.com> wrote:
>
> The following changes since commit ea9cdbcf3a0b8d5497cddf87990f1b39d8f3bb0a:
>
> Merge tag 'hw-misc-20240913' of https://github.com/philmd/qemu into staging (2024-09-15 18:27:40 +0100)
>
> are available in the Git repository at:
>
> https://github.com/legoater/qemu/ tags/pull-aspeed-20240916
>
> for you to fetch changes up to a93bb519e683fd8f8d7945e5517fd5ad74cc41c0:
>
> machine_aspeed.py: Update to test I2C for AST2700 (2024-09-16 17:44:08 +0200)
>
> ----------------------------------------------------------------
> aspeed queue:
>
> * I2C support for AST2700
> * Coverity fixes
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/9.2
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 18+ messages in thread