From: Michael Clark <mjc@sifive.com>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: QEMU Developers <qemu-devel@nongnu.org>,
RISC-V Patches <patches@groups.riscv.org>,
Palmer Dabbelt <palmer@sifive.com>
Subject: Re: [Qemu-devel] [PATCH 1/2] target/riscv: Split out mstatus_fs from tb_flags during translation
Date: Wed, 28 Mar 2018 13:48:26 -0700 [thread overview]
Message-ID: <CAHNT7NsGdfvr0JugRwx-tHi_iPOPH6GEAVPCAjqdUw7wvCGPJg@mail.gmail.com> (raw)
In-Reply-To: <20180328022233.13400-2-richard.henderson@linaro.org>
On Tue, Mar 27, 2018 at 7:22 PM, Richard Henderson <
richard.henderson@linaro.org> wrote:
> We will want to track changes to mstatus_fs through the TB.
> As there is nothing else in tb_flags at the moment, remove
> the variable from DisasContext.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>
Reviewed-by: Michael Clark <mjc@sifive.com>
---
> target/riscv/cpu.h | 6 +++---
> target/riscv/translate.c | 10 +++++-----
> 2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 41e06ac0f9..d201dd3e90 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -269,8 +269,8 @@ void QEMU_NORETURN do_raise_exception_err(CPURISCVState
> *env,
> target_ulong cpu_riscv_get_fflags(CPURISCVState *env);
> void cpu_riscv_set_fflags(CPURISCVState *env, target_ulong);
>
> -#define TB_FLAGS_MMU_MASK 3
> -#define TB_FLAGS_FP_ENABLE MSTATUS_FS
> +#define TB_FLAGS_MMU_MASK 3
> +#define TB_FLAGS_MSTATUS_FS MSTATUS_FS
>
> static inline void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong
> *pc,
> target_ulong *cs_base, uint32_t
> *flags)
> @@ -278,7 +278,7 @@ static inline void cpu_get_tb_cpu_state(CPURISCVState
> *env, target_ulong *pc,
> *pc = env->pc;
> *cs_base = 0;
> #ifdef CONFIG_USER_ONLY
> - *flags = TB_FLAGS_FP_ENABLE;
> + *flags = TB_FLAGS_MSTATUS_FS;
> #else
> *flags = cpu_mmu_index(env, 0) | (env->mstatus & MSTATUS_FS);
> #endif
> diff --git a/target/riscv/translate.c b/target/riscv/translate.c
> index 808eab7f50..a30724aa90 100644
> --- a/target/riscv/translate.c
> +++ b/target/riscv/translate.c
> @@ -43,7 +43,7 @@ typedef struct DisasContext {
> target_ulong pc;
> target_ulong next_pc;
> uint32_t opcode;
> - uint32_t flags;
> + uint32_t mstatus_fs;
> uint32_t mem_idx;
> int singlestep_enabled;
> int bstate;
> @@ -665,7 +665,7 @@ static void gen_fp_load(DisasContext *ctx, uint32_t
> opc, int rd,
> {
> TCGv t0;
>
> - if (!(ctx->flags & TB_FLAGS_FP_ENABLE)) {
> + if (ctx->mstatus_fs == 0) {
> gen_exception_illegal(ctx);
> return;
> }
> @@ -695,7 +695,7 @@ static void gen_fp_store(DisasContext *ctx, uint32_t
> opc, int rs1,
> {
> TCGv t0;
>
> - if (!(ctx->flags & TB_FLAGS_FP_ENABLE)) {
> + if (ctx->mstatus_fs == 0) {
> gen_exception_illegal(ctx);
> return;
> }
> @@ -986,7 +986,7 @@ static void gen_fp_arith(DisasContext *ctx, uint32_t
> opc, int rd,
> {
> TCGv t0 = NULL;
>
> - if (!(ctx->flags & TB_FLAGS_FP_ENABLE)) {
> + if (ctx->mstatus_fs == 0) {
> goto do_illegal;
> }
>
> @@ -1862,8 +1862,8 @@ void gen_intermediate_code(CPUState *cs,
> TranslationBlock *tb)
>
> ctx.tb = tb;
> ctx.bstate = BS_NONE;
> - ctx.flags = tb->flags;
> ctx.mem_idx = tb->flags & TB_FLAGS_MMU_MASK;
> + ctx.mstatus_fs = tb->flags & TB_FLAGS_MSTATUS_FS;
> ctx.frm = -1; /* unknown rounding mode */
>
> num_insns = 0;
> --
> 2.14.3
>
>
next prev parent reply other threads:[~2018-03-28 20:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 2:22 [Qemu-devel] [PATCH for-2.12 0/2] RISC-V: Mark FP status dirty Richard Henderson
2018-03-28 2:22 ` [Qemu-devel] [PATCH 1/2] target/riscv: Split out mstatus_fs from tb_flags during translation Richard Henderson
2018-03-28 20:48 ` Michael Clark [this message]
2018-03-28 2:22 ` [Qemu-devel] [PATCH 2/2] target/riscv: Mark MSTATUS_FS dirty Richard Henderson
2018-03-28 4:58 ` Richard Henderson
2018-03-28 17:36 ` Michael Clark
2018-03-28 17:47 ` Michael Clark
2018-03-28 20:50 ` Michael Clark
2018-03-28 4:54 ` [Qemu-devel] [PATCH for-2.12 0/2] RISC-V: Mark FP status dirty Michael Clark
2018-03-28 17:58 ` Michael Clark
2018-04-03 7:46 ` Richard W.M. Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHNT7NsGdfvr0JugRwx-tHi_iPOPH6GEAVPCAjqdUw7wvCGPJg@mail.gmail.com \
--to=mjc@sifive.com \
--cc=palmer@sifive.com \
--cc=patches@groups.riscv.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).