qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eugenio Perez Martin <eperezma@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: qemu-devel <qemu-devel@nongnu.org>,
	"Michael S. Tsirkin" <mst@redhat.com>
Subject: Re: [PATCH] vhost: Fix last queue index of devices with no cvq
Date: Tue, 2 Nov 2021 11:23:57 +0100	[thread overview]
Message-ID: <CAJaqyWdy92O15cChXxCU1_CTYFccmrcvHHb5JG=GrkEw0y219A@mail.gmail.com> (raw)
In-Reply-To: <CACGkMEsxW_ZKdF7JGvvCEspNMXeSUeovZM1DooR2RTsmESw5jw@mail.gmail.com>

On Tue, Nov 2, 2021 at 8:04 AM Jason Wang <jasowang@redhat.com> wrote:
>
> On Tue, Nov 2, 2021 at 2:59 PM Eugenio Perez Martin <eperezma@redhat.com> wrote:
> >
> > On Tue, Nov 2, 2021 at 5:09 AM Jason Wang <jasowang@redhat.com> wrote:
> > >
> > > On Mon, Nov 1, 2021 at 4:59 PM Eugenio Perez Martin <eperezma@redhat.com> wrote:
> > > >
> > > > On Mon, Nov 1, 2021 at 4:34 AM Jason Wang <jasowang@redhat.com> wrote:
> > > > >
> > > > > On Fri, Oct 29, 2021 at 10:16 PM Eugenio Pérez <eperezma@redhat.com> wrote:
> > > > > >
> > > > > > The -1 assumes that all devices with no cvq have an spare vq allocated
> > > > > > for them, but with no offer of VIRTIO_NET_F_CTRL_VQ. This may not be the
> > > > > > case, and the device may have a pair number of queues.
> > > > > >
> > > > > > To fix this, just resort to the lower even number of queues.
> > > > > >
> > > > > > Fixes: 049eb15b5fc9 ("vhost: record the last virtqueue index for the virtio device")
> > > > > > Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
> > > > > > ---
> > > > > >  hw/net/vhost_net.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
> > > > > > index 0d888f29a6..edf56a597f 100644
> > > > > > --- a/hw/net/vhost_net.c
> > > > > > +++ b/hw/net/vhost_net.c
> > > > > > @@ -330,7 +330,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
> > > > > >      NetClientState *peer;
> > > > > >
> > > > > >      if (!cvq) {
> > > > > > -        last_index -= 1;
> > > > > > +        last_index &= ~1ULL;
> > > > > >      }
> > > > >
> > > > > The math here looks correct but we need to fix vhost_vdpa_dev_start() instead?
> > > > >
> > > > > if (dev->vq_index + dev->nvqs - 1 != dev->last_index) {
> > > > > ...
> > > > > }
> > > > >
> > > >
> > > > If we just do that, devices that offer an odd number of queues but do
> > > > not offer ctrl vq would never enable the last vq pair, isn't it?
> > >
> > > For vq pair, you assume that it's a networking device, so the device
> > > you described here violates the spec.
> > >
> > > >
> > > > Also, I would say that the right place for the solution of this
> > > > problem should not be virtio/vhost-vdpa: This is highly dependent on
> > > > having cvq, and this implies a knowledge about the use of each
> > > > virtqueue. Another kind of device could have an odd number of
> > > > virtqueues naturally, and that (-1) would not work for them, isn't it?
> > >
> > > It actually depends on how multiqueue is modeled for each specific
> > > type of device. They need to initialize the vq_index and nvqs
> > > correctly:
> > >
> > > E.g if we had a device with 3 queues, we could model it with the following:
> > >
> > > vhost_dev 1, vq_index = 0, nvqs = 2
> > > vhost_dev 2, vq_index = 2, nvqs = 1
> > >
> > > In this case the last_index should be initialized to 2, then we know
> > > all the vhost_dev is initialized and we can start the hardware.
> > >
> >
> > Right, but in that case, cvq == true, and we never enter the
> > conditional if (!cvq).
> >
> > If cvq is false at that moment, your vhost_dev 2 *must* not exist and
> > the last index will be even, so we must not subtract 1 to last_index.
> > The subtraction is the cause the device never starts.

Clarification: I meant networking here :).

>
> The last_index will be 1, so the device will be started after
> vhost_dev 1 is initialized?
>

In !cvq !mq case, last_index is the number of virtqueues. It is initialized as:

int ... last_index = data_queue_pairs * 2;

and data queue pairs comes from caller function virtio_net_vhost_status:

int queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;

so last_index ends up being 2.

I didn't check a MQ device with !cvq, but I think it will be the same.

Thanks!

> Thanks
>
> >
> > Given all of the above, I think we can skip the conditional entirely.
> >
> > Thanks!
> >
> > > Thanks
> > >
> > > >
> > > > Thanks!
> > > >
> > > > > Thanks
> > > > >
> > > > > >
> > > > > >      if (!k->set_guest_notifiers) {
> > > > > > --
> > > > > > 2.27.0
> > > > > >
> > > > >
> > > >
> > >
> >
>



      reply	other threads:[~2021-11-02 10:26 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-29 14:16 [PATCH] vhost: Fix last queue index of devices with no cvq Eugenio Pérez
2021-10-31 21:47 ` Michael S. Tsirkin
2021-11-01  9:03   ` Eugenio Perez Martin
2021-11-01  9:12     ` Michael S. Tsirkin
2021-11-01  3:33 ` Jason Wang
2021-11-01  8:58   ` Eugenio Perez Martin
2021-11-01 15:42     ` Eugenio Perez Martin
2021-11-01 20:48       ` Michael S. Tsirkin
2021-11-02  6:54         ` Eugenio Perez Martin
2021-11-02  4:08     ` Jason Wang
2021-11-02  6:58       ` Eugenio Perez Martin
2021-11-02  7:04         ` Jason Wang
2021-11-02 10:23           ` Eugenio Perez Martin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJaqyWdy92O15cChXxCU1_CTYFccmrcvHHb5JG=GrkEw0y219A@mail.gmail.com' \
    --to=eperezma@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).