From: Alistair Francis <alistair23@gmail.com>
To: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Cc: Alistair Francis <alistair.francis@wdc.com>,
"open list:RISC-V" <qemu-riscv@nongnu.org>,
"qemu-devel@nongnu.org Developers" <qemu-devel@nongnu.org>
Subject: Re: [PATCH] target/riscv: Fix read and write accesses to vsip and vsie
Date: Fri, 19 Mar 2021 09:51:31 -0400 [thread overview]
Message-ID: <CAKmqyKOgAA9d8hgUo4YCZE6Yo6uVAj2JwyE+_ivJNGzNii3vdQ@mail.gmail.com> (raw)
In-Reply-To: <20210311094738.1376795-1-georg.kotheimer@kernkonzept.com>
On Thu, Mar 11, 2021 at 4:49 AM Georg Kotheimer
<georg.kotheimer@kernkonzept.com> wrote:
>
> The previous implementation was broken in many ways:
> - Used mideleg instead of hideleg to mask accesses
> - Used MIP_VSSIP instead of VS_MODE_INTERRUPTS to mask writes to vsie
> - Did not shift between S bits and VS bits (VSEIP <-> SEIP, ...)
>
> Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Thanks!
Applied to riscv-to-apply.next
Alistair
> ---
> target/riscv/csr.c | 68 +++++++++++++++++++++++-----------------------
> 1 file changed, 34 insertions(+), 34 deletions(-)
>
> diff --git a/target/riscv/csr.c b/target/riscv/csr.c
> index fd2e6363f3..4a5b362ec1 100644
> --- a/target/riscv/csr.c
> +++ b/target/riscv/csr.c
> @@ -748,30 +748,42 @@ static int write_sstatus(CPURISCVState *env, int csrno, target_ulong val)
> return write_mstatus(env, CSR_MSTATUS, newval);
> }
>
> +static int read_vsie(CPURISCVState *env, int csrno, target_ulong *val)
> +{
> + /* Shift the VS bits to their S bit location in vsie */
> + *val = (env->mie & env->hideleg & VS_MODE_INTERRUPTS) >> 1;
> + return 0;
> +}
> +
> static int read_sie(CPURISCVState *env, int csrno, target_ulong *val)
> {
> if (riscv_cpu_virt_enabled(env)) {
> - /* Tell the guest the VS bits, shifted to the S bit locations */
> - *val = (env->mie & env->mideleg & VS_MODE_INTERRUPTS) >> 1;
> + read_vsie(env, CSR_VSIE, val);
> } else {
> *val = env->mie & env->mideleg;
> }
> return 0;
> }
>
> -static int write_sie(CPURISCVState *env, int csrno, target_ulong val)
> +static int write_vsie(CPURISCVState *env, int csrno, target_ulong val)
> {
> - target_ulong newval;
> + /* Shift the S bits to their VS bit location in mie */
> + target_ulong newval = (env->mie & ~VS_MODE_INTERRUPTS) |
> + ((val << 1) & env->hideleg & VS_MODE_INTERRUPTS);
> + return write_mie(env, CSR_MIE, newval);
> +}
>
> +static int write_sie(CPURISCVState *env, int csrno, target_ulong val)
> +{
> if (riscv_cpu_virt_enabled(env)) {
> - /* Shift the guests S bits to VS */
> - newval = (env->mie & ~VS_MODE_INTERRUPTS) |
> - ((val << 1) & VS_MODE_INTERRUPTS);
> + write_vsie(env, CSR_VSIE, val);
> } else {
> - newval = (env->mie & ~S_MODE_INTERRUPTS) | (val & S_MODE_INTERRUPTS);
> + target_ulong newval = (env->mie & ~S_MODE_INTERRUPTS) |
> + (val & S_MODE_INTERRUPTS);
> + write_mie(env, CSR_MIE, newval);
> }
>
> - return write_mie(env, CSR_MIE, newval);
> + return 0;
> }
>
> static int read_stvec(CPURISCVState *env, int csrno, target_ulong *val)
> @@ -852,17 +864,25 @@ static int write_sbadaddr(CPURISCVState *env, int csrno, target_ulong val)
> return 0;
> }
>
> +static int rmw_vsip(CPURISCVState *env, int csrno, target_ulong *ret_value,
> + target_ulong new_value, target_ulong write_mask)
> +{
> + /* Shift the S bits to their VS bit location in mip */
> + int ret = rmw_mip(env, 0, ret_value, new_value << 1,
> + (write_mask << 1) & vsip_writable_mask & env->hideleg);
> + *ret_value &= VS_MODE_INTERRUPTS;
> + /* Shift the VS bits to their S bit location in vsip */
> + *ret_value >>= 1;
> + return ret;
> +}
> +
> static int rmw_sip(CPURISCVState *env, int csrno, target_ulong *ret_value,
> target_ulong new_value, target_ulong write_mask)
> {
> int ret;
>
> if (riscv_cpu_virt_enabled(env)) {
> - /* Shift the new values to line up with the VS bits */
> - ret = rmw_mip(env, CSR_MSTATUS, ret_value, new_value << 1,
> - (write_mask & sip_writable_mask) << 1 & env->mideleg);
> - ret &= vsip_writable_mask;
> - ret >>= 1;
> + ret = rmw_vsip(env, CSR_VSIP, ret_value, new_value, write_mask);
> } else {
> ret = rmw_mip(env, CSR_MSTATUS, ret_value, new_value,
> write_mask & env->mideleg & sip_writable_mask);
> @@ -1121,26 +1141,6 @@ static int write_vsstatus(CPURISCVState *env, int csrno, target_ulong val)
> return 0;
> }
>
> -static int rmw_vsip(CPURISCVState *env, int csrno, target_ulong *ret_value,
> - target_ulong new_value, target_ulong write_mask)
> -{
> - int ret = rmw_mip(env, 0, ret_value, new_value,
> - write_mask & env->mideleg & vsip_writable_mask);
> - return ret;
> -}
> -
> -static int read_vsie(CPURISCVState *env, int csrno, target_ulong *val)
> -{
> - *val = env->mie & env->mideleg & VS_MODE_INTERRUPTS;
> - return 0;
> -}
> -
> -static int write_vsie(CPURISCVState *env, int csrno, target_ulong val)
> -{
> - target_ulong newval = (env->mie & ~env->mideleg) | (val & env->mideleg & MIP_VSSIP);
> - return write_mie(env, CSR_MIE, newval);
> -}
> -
> static int read_vstvec(CPURISCVState *env, int csrno, target_ulong *val)
> {
> *val = env->vstvec;
> --
> 2.30.1
>
>
prev parent reply other threads:[~2021-03-19 13:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 9:47 [PATCH] target/riscv: Fix read and write accesses to vsip and vsie Georg Kotheimer
2021-03-19 13:24 ` Alistair Francis
2021-03-19 13:51 ` Alistair Francis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKmqyKOgAA9d8hgUo4YCZE6Yo6uVAj2JwyE+_ivJNGzNii3vdQ@mail.gmail.com \
--to=alistair23@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=georg.kotheimer@kernkonzept.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).