From: Alistair Francis <alistair.francis@xilinx.com>
To: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Alistair Francis <alistair.francis@xilinx.com>,
Peter Maydell <peter.maydell@linaro.org>,
Igor Mitsyanko <i.mitsyanko@gmail.com>,
"Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
Prasad J Pandit <pjp@fedoraproject.org>,
Peter Crosthwaite <crosthwaite.peter@gmail.com>,
"qemu-devel@nongnu.org Developers" <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [PATCH v3 03/12] sdcard: add a trace event for command responses
Date: Wed, 31 Jan 2018 08:13:37 -0800 [thread overview]
Message-ID: <CAKmqyKPACwC3M2MOqA8gr2MYcwPn0o+TPZAhXpguiWZ1DKyY2A@mail.gmail.com> (raw)
In-Reply-To: <20180123032135.28863-4-f4bug@amsat.org>
On Mon, Jan 22, 2018 at 7:21 PM, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/sd/sd.c | 26 +++++++++++++++++++++++---
> hw/sd/trace-events | 1 +
> 2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/hw/sd/sd.c b/hw/sd/sd.c
> index f876973a2b..3590099ce8 100644
> --- a/hw/sd/sd.c
> +++ b/hw/sd/sd.c
> @@ -152,6 +152,26 @@ static const char *sd_state_name(enum SDCardStates state)
> return state_name[state];
> }
>
> +static const char *sd_response_name(sd_rsp_type_t rsp)
> +{
> + static const char *response_name[] = {
> + [sd_r0] = "RESP#0 (no response)",
> + [sd_r1] = "RESP#1 (normal cmd)",
> + [sd_r2_i] = "RESP#2 (CID reg)",
> + [sd_r2_s] = "RESP#2 (CSD reg)",
> + [sd_r3] = "RESP#3 (OCR reg)",
> + [sd_r6] = "RESP#6 (RCA)",
> + [sd_r7] = "RESP#7 (operating voltage)",
> + };
> + if (rsp == sd_illegal) {
> + return "ILLEGAL RESP";
> + }
> + if (rsp == sd_r1b) {
> + rsp = sd_r1;
> + }
Same comments as patch number 2.
Alistair
> + return response_name[rsp];
> +}
> +
> static uint8_t sd_get_dat_lines(SDState *sd)
> {
> return sd->enable ? sd->dat_lines : 0;
> @@ -1595,10 +1615,12 @@ send_response:
>
> case sd_r0:
> case sd_illegal:
> - default:
> rsplen = 0;
> break;
> + default:
> + g_assert_not_reached();
> }
> + trace_sdcard_response(sd_response_name(rtype), rsplen);
>
> if (rtype != sd_illegal) {
> /* Clear the "clear on valid command" status bits now we've
> @@ -1614,8 +1636,6 @@ send_response:
> for (i = 0; i < rsplen; i++)
> fprintf(stderr, " %02x", response[i]);
> fputc('\n', stderr);
> - } else {
> - DPRINTF("No response %d\n", sd->state);
> }
> #endif
>
> diff --git a/hw/sd/trace-events b/hw/sd/trace-events
> index 75dac5a2cd..b2aa19ec0d 100644
> --- a/hw/sd/trace-events
> +++ b/hw/sd/trace-events
> @@ -26,6 +26,7 @@ sdhci_capareg(const char *desc, uint16_t val) "%s: %u"
> # hw/sd/sd.c
> sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)"
> sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x"
> +sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)"
> sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
> sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
>
> --
> 2.15.1
>
>
next prev parent reply other threads:[~2018-01-31 16:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-23 3:21 [Qemu-devel] [PATCH v3 00/12] SDCard: housekeeping, add tracing (part 4) Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 01/12] sdcard: reorder SDState struct members Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 02/12] sdcard: replace DPRINTF() by trace events Philippe Mathieu-Daudé
2018-01-31 16:12 ` Alistair Francis
2018-02-15 18:54 ` Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 03/12] sdcard: add a trace event for command responses Philippe Mathieu-Daudé
2018-01-31 16:13 ` Alistair Francis [this message]
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 04/12] sdcard: replace fprintf() by qemu_hexdump() Philippe Mathieu-Daudé
2018-01-23 22:55 ` Alistair Francis
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 05/12] sdcard: add more trace events Philippe Mathieu-Daudé
2018-01-24 0:35 ` Alistair Francis
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 06/12] sdcard: do not trace CMD55 when expecting ACMD Philippe Mathieu-Daudé
2018-01-23 22:56 ` Alistair Francis
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 07/12] sdcard: define SDMMC_CMD_MAX instead of using the magic '64' Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 08/12] sdcard: display command name when tracing CMD/ACMD Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 09/12] sdcard: display protocol used when tracing Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 10/12] sdcard: rename sd_set_$REG() functions called once as sd_reset_$REG() Philippe Mathieu-Daudé
2018-01-31 16:28 ` Alistair Francis
2018-02-07 22:22 ` Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 11/12] sdcard: use G_BYTE from cutils Philippe Mathieu-Daudé
2018-01-23 3:21 ` [Qemu-devel] [PATCH v3 12/12] sdcard: use the registerfields API to access the OCR register Philippe Mathieu-Daudé
2018-01-23 22:58 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKmqyKPACwC3M2MOqA8gr2MYcwPn0o+TPZAhXpguiWZ1DKyY2A@mail.gmail.com \
--to=alistair.francis@xilinx.com \
--cc=crosthwaite.peter@gmail.com \
--cc=edgar.iglesias@xilinx.com \
--cc=f4bug@amsat.org \
--cc=i.mitsyanko@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=pjp@fedoraproject.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).