Re: [Qemu-devel] [PATCH 12/14] sdhci: add a trace event for the LED control

[Alistair Francis <alistair.francis@xilinx.com>]

On Wed, Dec 13, 2017 at 11:58 AM, Philippe Mathieu-Daudé
<f4bug@amsat.org> wrote:
> It blinks to caution the user not to remove the card while the SD card is
> being accessed.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

If you turn this on does it just fill the trace log?

It seems like this will generate too much output if it happens on
every LED blink.

Alistair

> ---
>  hw/sd/sdhci.c      | 1 +
>  hw/sd/trace-events | 1 +
>  2 files changed, 2 insertions(+)
>
> diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
> index aa2d2fa3d3..dadc4787b2 100644
> --- a/hw/sd/sdhci.c
> +++ b/hw/sd/sdhci.c
> @@ -1041,6 +1041,7 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
>                  !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
>              s->pwrcon &= ~SDHC_POWER_ON;
>          }
> +        trace_sdhci_led(s->hostctl & 1);
>          break;
>      case SDHC_CLKCON:
>          if (!(mask & 0xFF000000)) {
> diff --git a/hw/sd/trace-events b/hw/sd/trace-events
> index f7a85be53d..11f8fa4fc1 100644
> --- a/hw/sd/trace-events
> +++ b/hw/sd/trace-events
> @@ -13,6 +13,7 @@ sdhci_adma_transfer_completed(void) "ADMA transfer completed"
>  sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s %ub: addr[0x%04" HWADDR_PRIx "] %s %" PRIu64 "(0x%" PRIx64 ")"
>  sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer"
>  sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data"
> +sdhci_led(bool state) "LED: %u"
>
>  # hw/sd/milkymist-memcard.c
>  milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
> --
> 2.15.1
>
>