From: Alistair Francis <alistair23@gmail.com>
To: Roan Richmond <roan.richmond@codethink.co.uk>
Cc: qemu-riscv@nongnu.org, palmer@dabbelt.com,
alistair.francis@wdc.com, liwei1518@gmail.com,
dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
qemu-devel@nongnu.org, richard.henderson@linaro.org
Subject: Re: [PATCH v2] Add RISCV Zilsd extension
Date: Wed, 12 Nov 2025 11:41:10 +1000 [thread overview]
Message-ID: <CAKmqyKPheAMZt6cn2d4bN2kPxXMrr5Vr8jY5+MBuqhptnc4wjw@mail.gmail.com> (raw)
In-Reply-To: <20251110090510.84103-1-roan.richmond@codethink.co.uk>
On Mon, Nov 10, 2025 at 7:05 PM Roan Richmond
<roan.richmond@codethink.co.uk> wrote:
>
> This is based on v1.0 of the Zilsd extension [1].
> The specification is listed as in the Ratified state [2],
> since Jan 30, 2025.
>
> [1]: https://github.com/riscv/riscv-zilsd
> [2]: https://riscv.atlassian.net/wiki/spaces/HOME/pages/16154861/RISC-V+Specs+Under+Development
>
> Reviewed-by: Daniel Henrique barboza <dbarboza@ventanamicro.com>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Roan Richmond <roan.richmond@codethink.co.uk>
> ---
> v2:
> - In `gen_load_zilsd` swapped `dest_gpr` with `tcg_temp_new`, this prevents
> writing to `r1/r0` in the case where `r0` is the set as `rd`.
> - Removed unneeded brackets around `a->rd` + c expressions
>
> target/riscv/cpu.c | 2 +
> target/riscv/cpu_cfg_fields.h.inc | 1 +
> target/riscv/insn_trans/trans_rvi.c.inc | 57 ++++++++++++++++++++++++-
> 3 files changed, 58 insertions(+), 2 deletions(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 73d4280d7c..6e0d37fb96 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -121,6 +121,7 @@ const RISCVIsaExtData isa_edata_arr[] = {
> ISA_EXT_DATA_ENTRY(zihintntl, PRIV_VERSION_1_10_0, ext_zihintntl),
> ISA_EXT_DATA_ENTRY(zihintpause, PRIV_VERSION_1_10_0, ext_zihintpause),
> ISA_EXT_DATA_ENTRY(zihpm, PRIV_VERSION_1_12_0, ext_zihpm),
> + ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_13_0, ext_zilsd),
> ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop),
> ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul),
> ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12),
> @@ -1247,6 +1248,7 @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = {
> MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true),
> MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true),
> MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true),
> + MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false),
> MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false),
> MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false),
> MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false),
> diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc
> index a154ecdc79..8d8e35e4cf 100644
> --- a/target/riscv/cpu_cfg_fields.h.inc
> +++ b/target/riscv/cpu_cfg_fields.h.inc
> @@ -41,6 +41,7 @@ BOOL_FIELD(ext_zicond)
> BOOL_FIELD(ext_zihintntl)
> BOOL_FIELD(ext_zihintpause)
> BOOL_FIELD(ext_zihpm)
> +BOOL_FIELD(ext_zilsd)
> BOOL_FIELD(ext_zimop)
> BOOL_FIELD(ext_zcmop)
> BOOL_FIELD(ext_ztso)
> diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc
> index 54b9b4f241..20058bf483 100644
> --- a/target/riscv/insn_trans/trans_rvi.c.inc
> +++ b/target/riscv/insn_trans/trans_rvi.c.inc
> @@ -18,6 +18,7 @@
> * this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include "migration/multifd.h"
> static bool trans_illegal(DisasContext *ctx, arg_empty *a)
> {
> gen_exception_illegal(ctx);
> @@ -370,6 +371,27 @@ static bool gen_load_tl(DisasContext *ctx, arg_lb *a, MemOp memop)
> return true;
> }
>
> +/* Zilsd extension adds load/store double for 32bit arch */
> +static bool gen_load_zilsd(DisasContext *ctx, arg_lb *a)
> +{
> + TCGv dest_1 = tcg_temp_new();
> + TCGv dest_2 = tcg_temp_new();
> + TCGv addr_1 = get_address(ctx, a->rs1, a->imm);
> + TCGv addr_2 = get_address(ctx, a->rs1, a->imm+4);
> +
> + tcg_gen_qemu_ld_tl(dest_1, addr_1, ctx->mem_idx, MO_SL);
> + tcg_gen_qemu_ld_tl(dest_2, addr_2, ctx->mem_idx, MO_SL);
> +
> + /* If destination is x0 then result of the load is discarded */
> + if (a->rd == 0) {
> + return true;
> + }
> +
> + gen_set_gpr(ctx, a->rd, dest_1);
> + gen_set_gpr(ctx, a->rd+1, dest_2);
> + return true;
> +}
> +
> /* Compute only 64-bit addresses to use the address translation mechanism */
> static bool gen_load_i128(DisasContext *ctx, arg_lb *a, MemOp memop)
> {
> @@ -409,6 +431,8 @@ static bool gen_load(DisasContext *ctx, arg_lb *a, MemOp memop)
> decode_save_opc(ctx, 0);
> if (get_xl(ctx) == MXL_RV128) {
> out = gen_load_i128(ctx, a, memop);
> + } else if (memop == MO_SQ && get_xl(ctx) == MXL_RV32) {
> + out = gen_load_zilsd(ctx, a);
> } else {
> out = gen_load_tl(ctx, a, memop);
> }
> @@ -437,7 +461,10 @@ static bool trans_lw(DisasContext *ctx, arg_lw *a)
>
> static bool trans_ld(DisasContext *ctx, arg_ld *a)
> {
> - REQUIRE_64_OR_128BIT(ctx);
> + /* Check for Zilsd extension if 32bit */
> + if (get_xl(ctx) == MXL_RV32 && !ctx->cfg_ptr->ext_zilsd) {
> + return false;
> + }
> return gen_load(ctx, a, MO_SQ);
> }
>
> @@ -482,6 +509,27 @@ static bool gen_store_tl(DisasContext *ctx, arg_sb *a, MemOp memop)
> return true;
> }
>
> +/* Zilsd extension adds load/store double for 32bit arch */
> +static bool gen_store_zilsd(DisasContext *ctx, arg_sb *a)
> +{
> + TCGv data_1 = tcg_temp_new();
> + TCGv data_2 = tcg_temp_new();
> + if (a->rs2 != 0) {
> + data_1 = get_gpr(ctx, a->rs2, EXT_NONE);
> + data_2 = get_gpr(ctx, a->rs2+1, EXT_NONE);
> + }
Don't mix code and declarations, otherwise
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Alistair
> + TCGv addr_1 = get_address(ctx, a->rs1, a->imm);
> + TCGv addr_2 = get_address(ctx, a->rs1, a->imm+4);
> +
> + if (ctx->ztso) {
> + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL);
> + }
> +
> + tcg_gen_qemu_st_tl(data_1, addr_1, ctx->mem_idx, MO_SL);
> + tcg_gen_qemu_st_tl(data_2, addr_2, ctx->mem_idx, MO_SL);
> + return true;
> +}
> +
> static bool gen_store_i128(DisasContext *ctx, arg_sb *a, MemOp memop)
> {
> TCGv src1l = get_gpr(ctx, a->rs1, EXT_NONE);
> @@ -511,6 +559,8 @@ static bool gen_store(DisasContext *ctx, arg_sb *a, MemOp memop)
> decode_save_opc(ctx, 0);
> if (get_xl(ctx) == MXL_RV128) {
> return gen_store_i128(ctx, a, memop);
> + } else if (memop == MO_UQ && get_xl(ctx) == MXL_RV32) {
> + return gen_store_zilsd(ctx, a);
> } else {
> return gen_store_tl(ctx, a, memop);
> }
> @@ -533,7 +583,10 @@ static bool trans_sw(DisasContext *ctx, arg_sw *a)
>
> static bool trans_sd(DisasContext *ctx, arg_sd *a)
> {
> - REQUIRE_64_OR_128BIT(ctx);
> + /* Check for Zilsd extension if 32bit */
> + if (get_xl(ctx) == MXL_RV32 && !ctx->cfg_ptr->ext_zilsd) {
> + return false;
> + }
> return gen_store(ctx, a, MO_UQ);
> }
>
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-11-12 1:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-10 9:05 [PATCH v2] Add RISCV Zilsd extension Roan Richmond
2025-11-12 1:41 ` Alistair Francis [this message]
2025-11-13 8:53 ` Roan Richmond
2025-11-21 7:41 ` Philippe Mathieu-Daudé
2025-11-13 10:54 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKmqyKPheAMZt6cn2d4bN2kPxXMrr5Vr8jY5+MBuqhptnc4wjw@mail.gmail.com \
--to=alistair23@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=dbarboza@ventanamicro.com \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=roan.richmond@codethink.co.uk \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).