From: Niek Linnenbank <nieklinnenbank@gmail.com>
To: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
jasowang@redhat.com, "QEMU Developers" <qemu-devel@nongnu.org>,
"Beniamino Galvani" <b.galvani@gmail.com>,
qemu-arm <qemu-arm@nongnu.org>,
imammedo@redhat.com, "Alex Bennée" <alex.bennee@linaro.org>
Subject: Re: [PATCH v4 03/20] hw/arm/allwinner-h3: add Clock Control Unit
Date: Sat, 1 Feb 2020 22:15:45 +0100 [thread overview]
Message-ID: <CAPan3Wr-tswXP3esO70mcNjHJrbfjKL47BVRhK_K4XzZ68W5sg@mail.gmail.com> (raw)
In-Reply-To: <61914945-ab68-b47b-9d8d-3ed78c93640c@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 18583 bytes --]
Hi Philippe,
On Sun, Jan 19, 2020 at 7:34 PM Philippe Mathieu-Daudé <philmd@redhat.com>
wrote:
> On 1/19/20 1:50 AM, Niek Linnenbank wrote:
> > The Clock Control Unit is responsible for clock signal generation,
> > configuration and distribution in the Allwinner H3 System on Chip.
> > This commit adds support for the Clock Control Unit which emulates
> > a simple read/write register interface.
> >
> > Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
> > ---
> > include/hw/arm/allwinner-h3.h | 3 +
> > include/hw/misc/allwinner-h3-ccu.h | 66 ++++++++
> > hw/arm/allwinner-h3.c | 9 +-
> > hw/misc/allwinner-h3-ccu.c | 243 +++++++++++++++++++++++++++++
> > hw/misc/Makefile.objs | 1 +
> > 5 files changed, 321 insertions(+), 1 deletion(-)
> > create mode 100644 include/hw/misc/allwinner-h3-ccu.h
> > create mode 100644 hw/misc/allwinner-h3-ccu.c
> >
> > diff --git a/include/hw/arm/allwinner-h3.h
> b/include/hw/arm/allwinner-h3.h
> > index 2aac9b78ec..abdc20871a 100644
> > --- a/include/hw/arm/allwinner-h3.h
> > +++ b/include/hw/arm/allwinner-h3.h
> > @@ -39,6 +39,7 @@
> > #include "hw/arm/boot.h"
> > #include "hw/timer/allwinner-a10-pit.h"
> > #include "hw/intc/arm_gic.h"
> > +#include "hw/misc/allwinner-h3-ccu.h"
> > #include "target/arm/cpu.h"
> >
> > /**
> > @@ -55,6 +56,7 @@ enum {
> > AW_H3_SRAM_A1,
> > AW_H3_SRAM_A2,
> > AW_H3_SRAM_C,
> > + AW_H3_CCU,
> > AW_H3_PIT,
> > AW_H3_UART0,
> > AW_H3_UART1,
> > @@ -97,6 +99,7 @@ typedef struct AwH3State {
> > ARMCPU cpus[AW_H3_NUM_CPUS];
> > const hwaddr *memmap;
> > AwA10PITState timer;
> > + AwH3ClockCtlState ccu;
> > GICState gic;
> > MemoryRegion sram_a1;
> > MemoryRegion sram_a2;
> > diff --git a/include/hw/misc/allwinner-h3-ccu.h
> b/include/hw/misc/allwinner-h3-ccu.h
> > new file mode 100644
> > index 0000000000..9c8a887782
> > --- /dev/null
> > +++ b/include/hw/misc/allwinner-h3-ccu.h
> > @@ -0,0 +1,66 @@
> > +/*
> > + * Allwinner H3 Clock Control Unit emulation
> > + *
> > + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation, either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <http://www.gnu.org/licenses/
> >.
> > + */
> > +
> > +#ifndef HW_MISC_ALLWINNER_H3_CCU_H
> > +#define HW_MISC_ALLWINNER_H3_CCU_H
> > +
> > +#include "qom/object.h"
> > +#include "hw/sysbus.h"
> > +
> > +/**
> > + * @name Constants
> > + * @{
> > + */
> > +
> > +/** Highest register address used by CCU device */
> > +#define AW_H3_CCU_REGS_MAXADDR (0x304)
>
> There might be a migration issue if one day we see some firmware
> accessing some undocumented register > 0x304 (you'd need to migrate more
> than 0x304/4 registers, so increase allwinner_h3_ccu_vmstate.version_id.
>
> I'd simply replace this definition by
>
> #define AW_H3_CCU_IOSIZE 0x400
>
> And see comment in write().
>
Good point, thanks I'll change that to 0x400!
>
> > +
> > +/** Total number of known registers */
> > +#define AW_H3_CCU_REGS_NUM (AW_H3_CCU_REGS_MAXADDR /
> sizeof(uint32_t))
> > +
> > +/** @} */
> > +
> > +/**
> > + * @name Object model
> > + * @{
> > + */
> > +
> > +#define TYPE_AW_H3_CCU "allwinner-h3-ccu"
> > +#define AW_H3_CCU(obj) \
> > + OBJECT_CHECK(AwH3ClockCtlState, (obj), TYPE_AW_H3_CCU)
> > +
> > +/** @} */
> > +
> > +/**
> > + * Allwinner H3 CCU object instance state.
> > + */
> > +typedef struct AwH3ClockCtlState {
> > + /*< private >*/
> > + SysBusDevice parent_obj;
> > + /*< public >*/
> > +
> > + /** Maps I/O registers in physical memory */
> > + MemoryRegion iomem;
> > +
> > + /** Array of hardware registers */
> > + uint32_t regs[AW_H3_CCU_REGS_NUM];
> > +
> > +} AwH3ClockCtlState;
> > +
> > +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */
> > diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c
> > index efe6042af3..8df8e3e05e 100644
> > --- a/hw/arm/allwinner-h3.c
> > +++ b/hw/arm/allwinner-h3.c
> > @@ -36,6 +36,7 @@ const hwaddr allwinner_h3_memmap[] = {
> > [AW_H3_SRAM_A1] = 0x00000000,
> > [AW_H3_SRAM_A2] = 0x00044000,
> > [AW_H3_SRAM_C] = 0x00010000,
> > + [AW_H3_CCU] = 0x01c20000,
> > [AW_H3_PIT] = 0x01c20c00,
> > [AW_H3_UART0] = 0x01c28000,
> > [AW_H3_UART1] = 0x01c28400,
> > @@ -77,7 +78,6 @@ struct AwH3Unimplemented {
> > { "usb2", 0x01c1c000, 4 * KiB },
> > { "usb3", 0x01c1d000, 4 * KiB },
> > { "smc", 0x01c1e000, 4 * KiB },
> > - { "ccu", 0x01c20000, 1 * KiB },
> > { "pio", 0x01c20800, 1 * KiB },
> > { "owa", 0x01c21000, 1 * KiB },
> > { "pwm", 0x01c21400, 1 * KiB },
> > @@ -172,6 +172,9 @@ static void allwinner_h3_init(Object *obj)
> > "clk0-freq", &error_abort);
> > object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer),
> > "clk1-freq", &error_abort);
> > +
> > + sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu),
> > + TYPE_AW_H3_CCU);
> > }
> >
> > static void allwinner_h3_realize(DeviceState *dev, Error **errp)
> > @@ -277,6 +280,10 @@ static void allwinner_h3_realize(DeviceState *dev,
> Error **errp)
> > memory_region_add_subregion(get_system_memory(),
> s->memmap[AW_H3_SRAM_C],
> > &s->sram_c);
> >
> > + /* Clock Control Unit */
> > + qdev_init_nofail(DEVICE(&s->ccu));
> > + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]);
> > +
> > /* UART0. For future clocktree API: All UARTS are connected to
> APB2_CLK. */
> > serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2,
> > qdev_get_gpio_in(DEVICE(&s->gic),
> AW_H3_GIC_SPI_UART0),
> > diff --git a/hw/misc/allwinner-h3-ccu.c b/hw/misc/allwinner-h3-ccu.c
> > new file mode 100644
> > index 0000000000..ccf58ccdf2
> > --- /dev/null
> > +++ b/hw/misc/allwinner-h3-ccu.c
> > @@ -0,0 +1,243 @@
> > +/*
> > + * Allwinner H3 Clock Control Unit emulation
> > + *
> > + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation, either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <http://www.gnu.org/licenses/
> >.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/units.h"
> > +#include "hw/sysbus.h"
> > +#include "migration/vmstate.h"
> > +#include "qemu/log.h"
> > +#include "qemu/module.h"
> > +#include "hw/misc/allwinner-h3-ccu.h"
> > +
> > +/* CCU register offsets */
> > +enum {
> > + REG_PLL_CPUX = 0x0000, /* PLL CPUX Control */
> > + REG_PLL_AUDIO = 0x0008, /* PLL Audio Control */
> > + REG_PLL_VIDEO = 0x0010, /* PLL Video Control */
> > + REG_PLL_VE = 0x0018, /* PLL VE Control */
> > + REG_PLL_DDR = 0x0020, /* PLL DDR Control */
> > + REG_PLL_PERIPH0 = 0x0028, /* PLL Peripherals 0 Control */
> > + REG_PLL_GPU = 0x0038, /* PLL GPU Control */
> > + REG_PLL_PERIPH1 = 0x0044, /* PLL Peripherals 1 Control */
> > + REG_PLL_DE = 0x0048, /* PLL Display Engine Control */
> > + REG_CPUX_AXI = 0x0050, /* CPUX/AXI Configuration */
> > + REG_APB1 = 0x0054, /* ARM Peripheral Bus 1 Config */
> > + REG_APB2 = 0x0058, /* ARM Peripheral Bus 2 Config */
> > + REG_DRAM_CFG = 0x00F4, /* DRAM Configuration */
> > + REG_MBUS = 0x00FC, /* MBUS Reset */
> > + REG_PLL_TIME0 = 0x0200, /* PLL Stable Time 0 */
> > + REG_PLL_TIME1 = 0x0204, /* PLL Stable Time 1 */
> > + REG_PLL_CPUX_BIAS = 0x0220, /* PLL CPUX Bias */
> > + REG_PLL_AUDIO_BIAS = 0x0224, /* PLL Audio Bias */
> > + REG_PLL_VIDEO_BIAS = 0x0228, /* PLL Video Bias */
> > + REG_PLL_VE_BIAS = 0x022C, /* PLL VE Bias */
> > + REG_PLL_DDR_BIAS = 0x0230, /* PLL DDR Bias */
> > + REG_PLL_PERIPH0_BIAS = 0x0234, /* PLL Peripherals 0 Bias */
> > + REG_PLL_GPU_BIAS = 0x023C, /* PLL GPU Bias */
> > + REG_PLL_PERIPH1_BIAS = 0x0244, /* PLL Peripherals 1 Bias */
> > + REG_PLL_DE_BIAS = 0x0248, /* PLL Display Engine Bias */
> > + REG_PLL_CPUX_TUNING = 0x0250, /* PLL CPUX Tuning */
> > + REG_PLL_DDR_TUNING = 0x0260, /* PLL DDR Tuning */
> > +};
> > +
> > +#define REG_INDEX(offset) (offset / sizeof(uint32_t))
> > +
> > +/* CCU register flags */
> > +enum {
> > + REG_DRAM_CFG_UPDATE = (1 << 16),
> > +};
> > +
> > +enum {
> > + REG_PLL_ENABLE = (1 << 31),
> > + REG_PLL_LOCK = (1 << 28),
> > +};
> > +
> > +
> > +/* CCU register reset values */
> > +enum {
> > + REG_PLL_CPUX_RST = 0x00001000,
> > + REG_PLL_AUDIO_RST = 0x00035514,
> > + REG_PLL_VIDEO_RST = 0x03006207,
> > + REG_PLL_VE_RST = 0x03006207,
> > + REG_PLL_DDR_RST = 0x00001000,
> > + REG_PLL_PERIPH0_RST = 0x00041811,
> > + REG_PLL_GPU_RST = 0x03006207,
> > + REG_PLL_PERIPH1_RST = 0x00041811,
> > + REG_PLL_DE_RST = 0x03006207,
> > + REG_CPUX_AXI_RST = 0x00010000,
> > + REG_APB1_RST = 0x00001010,
> > + REG_APB2_RST = 0x01000000,
> > + REG_DRAM_CFG_RST = 0x00000000,
> > + REG_MBUS_RST = 0x80000000,
> > + REG_PLL_TIME0_RST = 0x000000FF,
> > + REG_PLL_TIME1_RST = 0x000000FF,
> > + REG_PLL_CPUX_BIAS_RST = 0x08100200,
> > + REG_PLL_AUDIO_BIAS_RST = 0x10100000,
> > + REG_PLL_VIDEO_BIAS_RST = 0x10100000,
> > + REG_PLL_VE_BIAS_RST = 0x10100000,
> > + REG_PLL_DDR_BIAS_RST = 0x81104000,
> > + REG_PLL_PERIPH0_BIAS_RST = 0x10100010,
> > + REG_PLL_GPU_BIAS_RST = 0x10100000,
> > + REG_PLL_PERIPH1_BIAS_RST = 0x10100010,
> > + REG_PLL_DE_BIAS_RST = 0x10100000,
> > + REG_PLL_CPUX_TUNING_RST = 0x0A101000,
> > + REG_PLL_DDR_TUNING_RST = 0x14880000,
> > +};
> > +
> > +static uint64_t allwinner_h3_ccu_read(void *opaque, hwaddr offset,
> > + unsigned size)
> > +{
> > + const AwH3ClockCtlState *s = AW_H3_CCU(opaque);
> > + const uint32_t idx = REG_INDEX(offset);
> > +
> > + if (idx >= AW_H3_CCU_REGS_NUM) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset
> 0x%04x\n",
> > + __func__, (uint32_t)offset);
>
> See comment in write().
>
> > + return 0;
> > + }
> > +
> > + return s->regs[idx];
> > +}
> > +
> > +static void allwinner_h3_ccu_write(void *opaque, hwaddr offset,
> > + uint64_t val, unsigned size)
> > +{
> > + AwH3ClockCtlState *s = AW_H3_CCU(opaque);
> > + const uint32_t idx = REG_INDEX(offset);
> > +
> > + if (idx >= AW_H3_CCU_REGS_NUM) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset
> 0x%04x\n",
> > + __func__, (uint32_t)offset);
>
> I'd replace this check by ...
>
> > + return;
> > + }
> > +
> > + switch (offset) {
> > + case REG_DRAM_CFG: /* DRAM Configuration */
> > + val &= ~REG_DRAM_CFG_UPDATE;
> > + break;
> > + case REG_PLL_CPUX: /* PLL CPUX Control */
> > + case REG_PLL_AUDIO: /* PLL Audio Control */
> > + case REG_PLL_VIDEO: /* PLL Video Control */
> > + case REG_PLL_VE: /* PLL VE Control */
> > + case REG_PLL_DDR: /* PLL DDR Control */
> > + case REG_PLL_PERIPH0: /* PLL Peripherals 0 Control */
> > + case REG_PLL_GPU: /* PLL GPU Control */
> > + case REG_PLL_PERIPH1: /* PLL Peripherals 1 Control */
> > + case REG_PLL_DE: /* PLL Display Engine Control */
> > + if (val & REG_PLL_ENABLE) {
> > + val |= REG_PLL_LOCK;
> > + }
> > + break;
>
> case 0x304 ... AW_H3_CCU_IOSIZE:
> qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset
> 0x%04x\n",
> __func__, (uint32_t)offset);
> break;
>
OK, looks more compact indeed.
>
> > + default:
> > + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset
> 0x%04x\n",
> > + __func__, (uint32_t)offset);
> > + break;
> > + }
> > +
> > + s->regs[idx] = (uint32_t) val;
> > +}
>
> That said,
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>
Thanks!
Niek
>
> > +
> > +static const MemoryRegionOps allwinner_h3_ccu_ops = {
> > + .read = allwinner_h3_ccu_read,
> > + .write = allwinner_h3_ccu_write,
> > + .endianness = DEVICE_NATIVE_ENDIAN,
> > + .valid = {
> > + .min_access_size = 4,
> > + .max_access_size = 4,
> > + },
> > + .impl.min_access_size = 4,
> > +};
> > +
> > +static void allwinner_h3_ccu_reset(DeviceState *dev)
> > +{
> > + AwH3ClockCtlState *s = AW_H3_CCU(dev);
> > +
> > + /* Set default values for registers */
> > + s->regs[REG_INDEX(REG_PLL_CPUX)] = REG_PLL_CPUX_RST;
> > + s->regs[REG_INDEX(REG_PLL_AUDIO)] = REG_PLL_AUDIO_RST;
> > + s->regs[REG_INDEX(REG_PLL_VIDEO)] = REG_PLL_VIDEO_RST;
> > + s->regs[REG_INDEX(REG_PLL_VE)] = REG_PLL_VE_RST;
> > + s->regs[REG_INDEX(REG_PLL_DDR)] = REG_PLL_DDR_RST;
> > + s->regs[REG_INDEX(REG_PLL_PERIPH0)] = REG_PLL_PERIPH0_RST;
> > + s->regs[REG_INDEX(REG_PLL_GPU)] = REG_PLL_GPU_RST;
> > + s->regs[REG_INDEX(REG_PLL_PERIPH1)] = REG_PLL_PERIPH1_RST;
> > + s->regs[REG_INDEX(REG_PLL_DE)] = REG_PLL_DE_RST;
> > + s->regs[REG_INDEX(REG_CPUX_AXI)] = REG_CPUX_AXI_RST;
> > + s->regs[REG_INDEX(REG_APB1)] = REG_APB1_RST;
> > + s->regs[REG_INDEX(REG_APB2)] = REG_APB2_RST;
> > + s->regs[REG_INDEX(REG_DRAM_CFG)] = REG_DRAM_CFG_RST;
> > + s->regs[REG_INDEX(REG_MBUS)] = REG_MBUS_RST;
> > + s->regs[REG_INDEX(REG_PLL_TIME0)] = REG_PLL_TIME0_RST;
> > + s->regs[REG_INDEX(REG_PLL_TIME1)] = REG_PLL_TIME1_RST;
> > + s->regs[REG_INDEX(REG_PLL_CPUX_BIAS)] = REG_PLL_CPUX_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_AUDIO_BIAS)] = REG_PLL_AUDIO_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_VIDEO_BIAS)] = REG_PLL_VIDEO_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_VE_BIAS)] = REG_PLL_VE_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_DDR_BIAS)] = REG_PLL_DDR_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_PERIPH0_BIAS)] = REG_PLL_PERIPH0_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_GPU_BIAS)] = REG_PLL_GPU_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_PERIPH1_BIAS)] = REG_PLL_PERIPH1_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_DE_BIAS)] = REG_PLL_DE_BIAS_RST;
> > + s->regs[REG_INDEX(REG_PLL_CPUX_TUNING)] = REG_PLL_CPUX_TUNING_RST;
> > + s->regs[REG_INDEX(REG_PLL_DDR_TUNING)] = REG_PLL_DDR_TUNING_RST;
> > +}
> > +
> > +static void allwinner_h3_ccu_init(Object *obj)
> > +{
> > + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> > + AwH3ClockCtlState *s = AW_H3_CCU(obj);
> > +
> > + /* Memory mapping */
> > + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_ccu_ops,
> s,
> > + TYPE_AW_H3_CCU, 1 * KiB);
> > + sysbus_init_mmio(sbd, &s->iomem);
> > +}
> > +
> > +static const VMStateDescription allwinner_h3_ccu_vmstate = {
> > + .name = "allwinner-h3-ccu",
> > + .version_id = 1,
> > + .minimum_version_id = 1,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_UINT32_ARRAY(regs, AwH3ClockCtlState,
> AW_H3_CCU_REGS_NUM),
> > + VMSTATE_END_OF_LIST()
> > + }
> > +};
> > +
> > +static void allwinner_h3_ccu_class_init(ObjectClass *klass, void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > + dc->reset = allwinner_h3_ccu_reset;
> > + dc->vmsd = &allwinner_h3_ccu_vmstate;
> > +}
> > +
> > +static const TypeInfo allwinner_h3_ccu_info = {
> > + .name = TYPE_AW_H3_CCU,
> > + .parent = TYPE_SYS_BUS_DEVICE,
> > + .instance_init = allwinner_h3_ccu_init,
> > + .instance_size = sizeof(AwH3ClockCtlState),
> > + .class_init = allwinner_h3_ccu_class_init,
> > +};
> > +
> > +static void allwinner_h3_ccu_register(void)
> > +{
> > + type_register_static(&allwinner_h3_ccu_info);
> > +}
> > +
> > +type_init(allwinner_h3_ccu_register)
> > diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
> > index da993f45b7..5e635b74d5 100644
> > --- a/hw/misc/Makefile.objs
> > +++ b/hw/misc/Makefile.objs
> > @@ -28,6 +28,7 @@ common-obj-$(CONFIG_MACIO) += macio/
> >
> > common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o
> >
> > +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o
> > common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o
> > common-obj-$(CONFIG_NSERIES) += cbus.o
> > common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o
> >
>
>
--
Niek Linnenbank
[-- Attachment #2: Type: text/html, Size: 23791 bytes --]
next prev parent reply other threads:[~2020-02-01 21:17 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-19 0:50 [PATCH v4 00/20] Add Allwinner H3 SoC and Orange Pi PC Machine Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 01/20] hw/arm: add Allwinner H3 System-on-Chip Niek Linnenbank
2020-01-19 18:01 ` Philippe Mathieu-Daudé
2020-02-01 19:21 ` Niek Linnenbank
2020-02-01 20:52 ` Philippe Mathieu-Daudé
2020-01-19 0:50 ` [PATCH v4 02/20] hw/arm: add Xunlong Orange Pi PC machine Niek Linnenbank
2020-01-19 18:04 ` Philippe Mathieu-Daudé
2020-02-02 22:47 ` Niek Linnenbank
2020-01-21 16:39 ` Igor Mammedov
2020-02-02 22:37 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 03/20] hw/arm/allwinner-h3: add Clock Control Unit Niek Linnenbank
2020-01-19 18:34 ` Philippe Mathieu-Daudé
2020-02-01 21:15 ` Niek Linnenbank [this message]
2020-01-19 0:50 ` [PATCH v4 04/20] hw/arm/allwinner-h3: add USB host controller Niek Linnenbank
2020-01-19 18:37 ` Philippe Mathieu-Daudé
2020-01-19 18:44 ` Philippe Mathieu-Daudé
2020-02-02 19:33 ` Niek Linnenbank
2020-02-12 22:23 ` Philippe Mathieu-Daudé
2020-02-02 19:12 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 05/20] hw/arm/allwinner-h3: add System Control module Niek Linnenbank
2020-01-19 18:46 ` Philippe Mathieu-Daudé
2020-01-19 0:50 ` [PATCH v4 06/20] hw/arm/allwinner: add CPU Configuration module Niek Linnenbank
2020-01-19 18:52 ` Philippe Mathieu-Daudé
2020-02-02 20:25 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 07/20] hw/arm/allwinner: add Security Identifier device Niek Linnenbank
2020-01-19 18:57 ` Philippe Mathieu-Daudé
2020-02-02 20:47 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 08/20] hw/arm/allwinner: add SD/MMC host controller Niek Linnenbank
2020-01-19 19:01 ` Philippe Mathieu-Daudé
2020-02-02 21:43 ` Niek Linnenbank
2020-02-07 21:09 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 09/20] hw/arm/allwinner-h3: add EMAC ethernet device Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 10/20] hw/arm/allwinner-h3: add Boot ROM support Niek Linnenbank
2020-01-19 19:14 ` Philippe Mathieu-Daudé
2020-02-02 22:11 ` Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 11/20] hw/arm/allwinner-h3: add SDRAM controller device Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 12/20] hw/arm/allwinner: add RTC device support Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 13/20] tests/boot_linux_console: Add a quick test for the OrangePi PC board Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 14/20] tests/boot_linux_console: Add initrd test for the Orange Pi " Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 15/20] tests/boot_linux_console: Add a SD card test for the OrangePi " Niek Linnenbank
2020-01-19 0:50 ` [PATCH v4 16/20] tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC Niek Linnenbank
2020-01-19 22:30 ` Philippe Mathieu-Daudé
2020-02-06 21:21 ` Niek Linnenbank
2020-02-12 22:02 ` Philippe Mathieu-Daudé
2020-01-19 0:50 ` [PATCH v4 17/20] Acceptance tests: Extract _console_interaction() Niek Linnenbank
2020-01-19 0:51 ` [PATCH v4 18/20] Acceptance tests: Add interrupt_interactive_console_until_pattern() Niek Linnenbank
2020-01-19 0:51 ` [PATCH v4 19/20] tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC Niek Linnenbank
2020-01-19 0:51 ` [PATCH v4 20/20] docs: add Orange Pi PC document Niek Linnenbank
2020-01-19 11:51 ` [PATCH v4 00/20] Add Allwinner H3 SoC and Orange Pi PC Machine Niek Linnenbank
2020-02-12 21:47 ` Niek Linnenbank
2020-02-12 22:12 ` Philippe Mathieu-Daudé
2020-02-17 20:27 ` Niek Linnenbank
2020-02-18 6:46 ` Philippe Mathieu-Daudé
2020-02-18 10:05 ` Peter Maydell
2020-02-18 21:50 ` Niek Linnenbank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPan3Wr-tswXP3esO70mcNjHJrbfjKL47BVRhK_K4XzZ68W5sg@mail.gmail.com \
--to=nieklinnenbank@gmail.com \
--cc=alex.bennee@linaro.org \
--cc=b.galvani@gmail.com \
--cc=imammedo@redhat.com \
--cc=jasowang@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).