From: "Nicholas Piggin" <npiggin@gmail.com>
To: "Richard Henderson" <richard.henderson@linaro.org>,
<qemu-devel@nongnu.org>
Cc: <jniethe5@gmail.com>, <qemu-ppc@nongnu.org>
Subject: Re: [PATCH v2 4/7] tcg/ppc: Use PLD in tcg_out_movi for constant pool
Date: Wed, 09 Aug 2023 21:20:36 +1000 [thread overview]
Message-ID: <CUNZ2SOR0AMY.2H67OHTB0OVDC@wheely> (raw)
In-Reply-To: <20230808030250.50602-5-richard.henderson@linaro.org>
On Tue Aug 8, 2023 at 1:02 PM AEST, Richard Henderson wrote:
> The prefixed instruction has a pc-relative form to use here.
I don't understand this code very well but going by existing
relocs it looks okay.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
> tcg/ppc/tcg-target.c.inc | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/tcg/ppc/tcg-target.c.inc b/tcg/ppc/tcg-target.c.inc
> index 61ae9d8ab7..b3b2e9874d 100644
> --- a/tcg/ppc/tcg-target.c.inc
> +++ b/tcg/ppc/tcg-target.c.inc
> @@ -101,6 +101,10 @@
> #define ALL_GENERAL_REGS 0xffffffffu
> #define ALL_VECTOR_REGS 0xffffffff00000000ull
>
> +#ifndef R_PPC64_PCREL34
> +#define R_PPC64_PCREL34 132
> +#endif
> +
> #define have_isel (cpuinfo & CPUINFO_ISEL)
>
> #ifndef CONFIG_SOFTMMU
> @@ -260,6 +264,19 @@ static bool reloc_pc14(tcg_insn_unit *src_rw, const tcg_insn_unit *target)
> return false;
> }
>
> +static bool reloc_pc34(tcg_insn_unit *src_rw, const tcg_insn_unit *target)
> +{
> + const tcg_insn_unit *src_rx = tcg_splitwx_to_rx(src_rw);
> + ptrdiff_t disp = tcg_ptr_byte_diff(target, src_rx);
> +
> + if (disp == sextract64(disp, 0, 34)) {
> + src_rw[0] = (src_rw[0] & ~0x3ffff) | ((disp >> 16) & 0x3ffff);
> + src_rw[1] = (src_rw[1] & ~0xffff) | (disp & 0xffff);
> + return true;
> + }
> + return false;
> +}
> +
> /* test if a constant matches the constraint */
> static bool tcg_target_const_match(int64_t val, TCGType type, int ct)
> {
> @@ -684,6 +701,8 @@ static bool patch_reloc(tcg_insn_unit *code_ptr, int type,
> return reloc_pc14(code_ptr, target);
> case R_PPC_REL24:
> return reloc_pc24(code_ptr, target);
> + case R_PPC64_PCREL34:
> + return reloc_pc34(code_ptr, target);
> case R_PPC_ADDR16:
> /*
> * We are (slightly) abusing this relocation type. In particular,
> @@ -1111,6 +1130,11 @@ static void tcg_out_movi_int(TCGContext *s, TCGType type, TCGReg ret,
> }
>
> /* Use the constant pool, if possible. */
> + if (have_isa_3_10) {
> + tcg_out_8ls_d(s, PLD, ret, 0, 0, 1);
> + new_pool_label(s, arg, R_PPC64_PCREL34, s->code_ptr - 2, 0);
> + return;
> + }
> if (!in_prologue && USE_REG_TB) {
> new_pool_label(s, arg, R_PPC_ADDR16, s->code_ptr,
> tcg_tbrel_diff(s, NULL));
next prev parent reply other threads:[~2023-08-09 11:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-08 3:02 [PATCH for-8.2 v2 0/7] tcg/ppc: Support power10 prefixed instructions Richard Henderson
2023-08-08 3:02 ` [PATCH v2 1/7] tcg/ppc: Untabify tcg-target.c.inc Richard Henderson
2023-08-09 8:55 ` Nicholas Piggin
2023-08-08 3:02 ` [PATCH v2 2/7] tcg/ppc: Use PADDI in tcg_out_movi Richard Henderson
2023-08-09 9:03 ` Nicholas Piggin
2023-08-08 3:02 ` [PATCH v2 3/7] tcg/ppc: Use prefixed instructions in tcg_out_mem_long Richard Henderson
2023-08-09 11:00 ` Nicholas Piggin
2023-08-08 3:02 ` [PATCH v2 4/7] tcg/ppc: Use PLD in tcg_out_movi for constant pool Richard Henderson
2023-08-09 11:20 ` Nicholas Piggin [this message]
2023-08-08 3:02 ` [PATCH v2 5/7] tcg/ppc: Use prefixed instructions in tcg_out_dupi_vec Richard Henderson
2023-08-08 3:02 ` [PATCH v2 6/7] tcg/ppc: Disable USE_REG_TB for Power v3.1 Richard Henderson
2023-08-09 11:21 ` Nicholas Piggin
2023-08-08 3:02 ` [PATCH v2 7/7] tcg/ppc: Use prefixed instructions for tcg_out_goto_tb Richard Henderson
2023-08-09 2:56 ` Jordan Niethe
2023-08-09 3:18 ` Richard Henderson
2023-08-09 11:24 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CUNZ2SOR0AMY.2H67OHTB0OVDC@wheely \
--to=npiggin@gmail.com \
--cc=jniethe5@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).