From: "Nicholas Piggin" <npiggin@gmail.com>
To: "Alex Bennée" <alex.bennee@linaro.org>
Cc: qemu-devel@nongnu.org,
"Pavel Dovgalyuk" <Pavel.Dovgalyuk@ispras.ru>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"John Snow" <jsnow@redhat.com>, "Cleber Rosa" <crosa@redhat.com>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>,
"Michael Tokarev" <mjt@tls.msk.ru>,
qemu-ppc@nongnu.org
Subject: Re: [PATCH v4 22/24] target/ppc: fix timebase register reset state
Date: Tue, 12 Mar 2024 23:47:20 +1000 [thread overview]
Message-ID: <CZRTGTKUK82Q.ILI4KLTI9TQL@wheely> (raw)
In-Reply-To: <87cyrzpopg.fsf@draig.linaro.org>
On Tue Mar 12, 2024 at 11:24 PM AEST, Alex Bennée wrote:
> Nicholas Piggin <npiggin@gmail.com> writes:
>
> > (H)DEC and PURR get reset before icount does, which causes them to be
> > skewed and not match the init state. This can cause replay to not
> > match the recorded trace exactly. For DEC and HDEC this is usually not
> > noticable since they tend to get programmed before affecting the
> > target machine. PURR has been observed to cause replay bugs when
> > running Linux.
> >
> > Fix this by resetting using a time of 0.
> >
> > Cc: qemu-ppc@nongnu.org
> > Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> > ---
> > hw/ppc/ppc.c | 11 ++++++++---
> > target/ppc/machine.c | 4 ++++
> > 2 files changed, 12 insertions(+), 3 deletions(-)
> >
> > diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
> > index fadb8f5239..f22321779e 100644
> > --- a/hw/ppc/ppc.c
> > +++ b/hw/ppc/ppc.c
> > @@ -1112,16 +1112,21 @@ void cpu_ppc_tb_reset(CPUPPCState *env)
> > timer_del(tb_env->hdecr_timer);
> > ppc_set_irq(cpu, PPC_INTERRUPT_HDECR, 0);
> > tb_env->hdecr_next = 0;
> > + _cpu_ppc_store_hdecr(cpu, 0, 0, 0, 64);
> > }
> >
> > /*
> > * There is a bug in Linux 2.4 kernels:
> > * if a decrementer exception is pending when it enables msr_ee at startup,
> > * it's not ready to handle it...
> > + *
> > + * On machine reset, in this is called before icount is reset, so
> > + * for icount-mode, setting TB registers using now=qemu_clock_get_ns
> > + * results in them being skewed when icount does get reset. Use an
> > + * explicit 0 to get a consistent reset state.
> > */
> > - cpu_ppc_store_decr(env, -1);
> > - cpu_ppc_store_hdecr(env, -1);
> > - cpu_ppc_store_purr(env, 0x0000000000000000ULL);
> > + _cpu_ppc_store_decr(cpu, 0, 0, -1, 64);
> > + _cpu_ppc_store_purr(env, 0, 0);
> > }
> >
> > void cpu_ppc_tb_free(CPUPPCState *env)
> > diff --git a/target/ppc/machine.c b/target/ppc/machine.c
> > index 203fe28e01..4c4294eafe 100644
> > --- a/target/ppc/machine.c
> > +++ b/target/ppc/machine.c
> > @@ -215,6 +215,8 @@ static int cpu_pre_save(void *opaque)
> > * it here.
> > */
> > env->spr[SPR_DECR] = cpu_ppc_load_decr(env);
> > + printf("cpu_ppc_pre_save TB:0x%016lx\n", cpu_ppc_load_tbl(env));
> > + printf("cpu_ppc_pre_save DEC:0x%016lx\n",
> > cpu_ppc_load_decr(env));
>
> I think this is left over debug, which btw needs proper types:
Yes you're right, sorry that was intended to be removed.
Thanks,
Nick
next prev parent reply other threads:[~2024-03-12 13:48 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-11 17:40 [PATCH v4 00/24] replay: fixes and new test cases Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 01/24] scripts/replay-dump.py: Update to current rr record format Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 02/24] scripts/replay-dump.py: rejig decoders in event number order Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 03/24] tests/avocado: excercise scripts/replay-dump.py in replay tests Nicholas Piggin
2024-03-12 13:25 ` Alex Bennée
2024-03-11 17:40 ` [PATCH v4 04/24] replay: allow runstate shutdown->running when replaying trace Nicholas Piggin
2024-03-12 13:26 ` Alex Bennée
2024-03-11 17:40 ` [PATCH v4 05/24] Revert "replay: stop us hanging in rr_wait_io_event" Nicholas Piggin
2024-03-12 13:33 ` Alex Bennée
2024-03-12 14:03 ` Nicholas Piggin
2024-03-12 21:03 ` Alex Bennée
2024-03-13 5:27 ` Nicholas Piggin
2024-03-14 5:19 ` Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 06/24] chardev: set record/replay on the base device of a muxed device Nicholas Piggin
2024-03-12 12:39 ` Marc-André Lureau
2024-03-12 14:11 ` Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 07/24] replay: Fix migration use of clock Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 08/24] replay: Fix migration replay_mutex locking Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 09/24] virtio-net: Use replay_schedule_bh_event for bhs that affect machine state Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 10/24] virtio-net: Use virtual time for RSC timers Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 11/24] net: Use virtual time for net announce Nicholas Piggin
2024-03-12 9:09 ` Pavel Dovgalyuk
2024-03-12 11:05 ` Nicholas Piggin
2024-03-12 11:12 ` Pavel Dovgalyuk
2024-03-13 5:38 ` Nicholas Piggin
2024-03-13 7:09 ` Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 12/24] savevm: Fix load_snapshot error path crash Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 13/24] tests/avocado: replay_linux.py remove the timeout expected guards Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 14/24] tests/avocado/reverse_debugging.py: mark aarch64 and pseries as not flaky Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 15/24] tests/avocado: reverse_debugging.py add test for x86-64 q35 machine Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 16/24] tests/avocado: reverse_debugging.py verify addresses between record and replay Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 17/24] tests/avocado: reverse_debugging.py stop VM before sampling icount Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 18/24] tests/avocado: reverse_debugging reverse-step at the end of the trace Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 19/24] tests/avocado: reverse_debugging.py add snapshot testing Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 20/24] replay: simple auto-snapshot mode for record Nicholas Piggin
2024-03-12 9:00 ` Pavel Dovgalyuk
2024-03-12 10:43 ` Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 21/24] tests/avocado: reverse_debugging.py test auto-snapshot mode Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 22/24] target/ppc: fix timebase register reset state Nicholas Piggin
2024-03-12 13:24 ` Alex Bennée
2024-03-12 13:47 ` Nicholas Piggin [this message]
2024-03-11 17:40 ` [PATCH v4 23/24] spapr: Fix vpa dispatch count for record-replay Nicholas Piggin
2024-03-11 17:40 ` [PATCH v4 24/24] tests/avocado: replay_linux.py add ppc64 pseries test Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CZRTGTKUK82Q.ILI4KLTI9TQL@wheely \
--to=npiggin@gmail.com \
--cc=Pavel.Dovgalyuk@ispras.ru \
--cc=alex.bennee@linaro.org \
--cc=bleal@redhat.com \
--cc=crosa@redhat.com \
--cc=jsnow@redhat.com \
--cc=mjt@tls.msk.ru \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=wainersm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).