From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [4194] configure cleanup
Date: Fri, 11 Apr 2008 21:36:07 +0000 [thread overview]
Message-ID: <E1JkQul-0002Z5-4j@cvs.savannah.gnu.org> (raw)
Revision: 4194
http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4194
Author: aurel32
Date: 2008-04-11 21:36:06 +0000 (Fri, 11 Apr 2008)
Log Message:
-----------
configure cleanup
(Stuart Brady)
Modified Paths:
--------------
trunk/configure
Modified: trunk/configure
===================================================================
--- trunk/configure 2008-04-11 21:35:59 UTC (rev 4193)
+++ trunk/configure 2008-04-11 21:36:06 UTC (rev 4194)
@@ -575,7 +575,14 @@
else
# if cross compiling, cannot launch a program, so make a static guess
-if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "mips64" -o "$cpu" = "s390" -o "$cpu" = "sparc" -o "$cpu" = "sparc64" -o "$cpu" = "m68k" -o "$cpu" = "armv4b"; then
+if test "$cpu" = "armv4b" \
+ -o "$cpu" = "m68k" \
+ -o "$cpu" = "mips" \
+ -o "$cpu" = "mips64" \
+ -o "$cpu" = "powerpc" \
+ -o "$cpu" = "s390" \
+ -o "$cpu" = "sparc" \
+ -o "$cpu" = "sparc64"; then
bigendian="yes"
fi
@@ -583,7 +590,10 @@
# host long bits test
hostlongbits="32"
-if test "$cpu" = "sparc64" -o "$cpu" = "ia64" -o "$cpu" = "x86_64" -o "$cpu" = "alpha"; then
+if test "$cpu" = "x86_64" \
+ -o "$cpu" = "alpha" \
+ -o "$cpu" = "ia64" \
+ -o "$cpu" = "sparc64"; then
hostlongbits="64"
fi
@@ -843,42 +853,42 @@
elif test "$cpu" = "x86_64" ; then
echo "ARCH=x86_64" >> $config_mak
echo "#define HOST_X86_64 1" >> $config_h
+elif test "$cpu" = "alpha" ; then
+ echo "ARCH=alpha" >> $config_mak
+ echo "#define HOST_ALPHA 1" >> $config_h
elif test "$cpu" = "armv4b" ; then
echo "ARCH=arm" >> $config_mak
echo "#define HOST_ARM 1" >> $config_h
elif test "$cpu" = "armv4l" ; then
echo "ARCH=arm" >> $config_mak
echo "#define HOST_ARM 1" >> $config_h
-elif test "$cpu" = "powerpc" ; then
- echo "ARCH=ppc" >> $config_mak
- echo "#define HOST_PPC 1" >> $config_h
+elif test "$cpu" = "cris" ; then
+ echo "ARCH=cris" >> $config_mak
+ echo "#define HOST_CRIS 1" >> $config_h
+elif test "$cpu" = "ia64" ; then
+ echo "ARCH=ia64" >> $config_mak
+ echo "#define HOST_IA64 1" >> $config_h
+elif test "$cpu" = "m68k" ; then
+ echo "ARCH=m68k" >> $config_mak
+ echo "#define HOST_M68K 1" >> $config_h
elif test "$cpu" = "mips" ; then
echo "ARCH=mips" >> $config_mak
echo "#define HOST_MIPS 1" >> $config_h
elif test "$cpu" = "mips64" ; then
echo "ARCH=mips64" >> $config_mak
echo "#define HOST_MIPS64 1" >> $config_h
-elif test "$cpu" = "cris" ; then
- echo "ARCH=cris" >> $config_mak
- echo "#define HOST_CRIS 1" >> $config_h
+elif test "$cpu" = "powerpc" ; then
+ echo "ARCH=ppc" >> $config_mak
+ echo "#define HOST_PPC 1" >> $config_h
elif test "$cpu" = "s390" ; then
echo "ARCH=s390" >> $config_mak
echo "#define HOST_S390 1" >> $config_h
-elif test "$cpu" = "alpha" ; then
- echo "ARCH=alpha" >> $config_mak
- echo "#define HOST_ALPHA 1" >> $config_h
elif test "$cpu" = "sparc" ; then
echo "ARCH=sparc" >> $config_mak
echo "#define HOST_SPARC 1" >> $config_h
elif test "$cpu" = "sparc64" ; then
echo "ARCH=sparc64" >> $config_mak
echo "#define HOST_SPARC64 1" >> $config_h
-elif test "$cpu" = "ia64" ; then
- echo "ARCH=ia64" >> $config_mak
- echo "#define HOST_IA64 1" >> $config_h
-elif test "$cpu" = "m68k" ; then
- echo "ARCH=m68k" >> $config_mak
- echo "#define HOST_M68K 1" >> $config_h
else
echo "Unsupported CPU = $cpu"
exit 1
@@ -1049,18 +1059,18 @@
target_cpu=`echo $target | cut -d '-' -f 1`
target_bigendian="no"
[ "$target_cpu" = "armeb" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc64" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes
+[ "$target_cpu" = "m68k" ] && target_bigendian=yes
+[ "$target_cpu" = "mips" ] && target_bigendian=yes
+[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes
+[ "$target_cpu" = "mips64" ] && target_bigendian=yes
[ "$target_cpu" = "ppc" ] && target_bigendian=yes
[ "$target_cpu" = "ppcemb" ] && target_bigendian=yes
[ "$target_cpu" = "ppc64" ] && target_bigendian=yes
[ "$target_cpu" = "ppc64abi32" ] && target_bigendian=yes
-[ "$target_cpu" = "mips" ] && target_bigendian=yes
-[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes
-[ "$target_cpu" = "mips64" ] && target_bigendian=yes
[ "$target_cpu" = "sh4eb" ] && target_bigendian=yes
-[ "$target_cpu" = "m68k" ] && target_bigendian=yes
+[ "$target_cpu" = "sparc" ] && target_bigendian=yes
+[ "$target_cpu" = "sparc64" ] && target_bigendian=yes
+[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes
target_softmmu="no"
target_user_only="no"
target_linux_user="no"
@@ -1129,6 +1139,18 @@
if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "i386" ; then
echo "#define USE_KQEMU 1" >> $config_h
fi
+elif test "$target_cpu" = "x86_64" ; then
+ echo "TARGET_ARCH=x86_64" >> $config_mak
+ echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
+ echo "#define TARGET_I386 1" >> $config_h
+ echo "#define TARGET_X86_64 1" >> $config_h
+ if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then
+ echo "#define USE_KQEMU 1" >> $config_h
+ fi
+elif test "$target_cpu" = "alpha" ; then
+ echo "TARGET_ARCH=alpha" >> $config_mak
+ echo "#define TARGET_ARCH \"alpha\"" >> $config_h
+ echo "#define TARGET_ALPHA 1" >> $config_h
elif test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then
echo "TARGET_ARCH=arm" >> $config_mak
echo "CONFIG_NO_DYNGEN_OP=yes" >> $config_mak
@@ -1136,24 +1158,33 @@
echo "#define TARGET_ARM 1" >> $config_h
echo "#define CONFIG_NO_DYNGEN_OP 1" >> $config_h
bflt="yes"
-elif test "$target_cpu" = "sparc" ; then
- echo "TARGET_ARCH=sparc" >> $config_mak
- echo "#define TARGET_ARCH \"sparc\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
-elif test "$target_cpu" = "sparc64" ; then
- echo "TARGET_ARCH=sparc64" >> $config_mak
- echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
- echo "#define TARGET_SPARC64 1" >> $config_h
- elfload32="yes"
-elif test "$target_cpu" = "sparc32plus" ; then
- echo "TARGET_ARCH=sparc64" >> $config_mak
- echo "TARGET_ABI_DIR=sparc" >> $config_mak
- echo "TARGET_ARCH2=sparc32plus" >> $config_mak
- echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
- echo "#define TARGET_SPARC64 1" >> $config_h
- echo "#define TARGET_ABI32 1" >> $config_h
+elif test "$target_cpu" = "cris" ; then
+ echo "TARGET_ARCH=cris" >> $config_mak
+ echo "#define TARGET_ARCH \"cris\"" >> $config_h
+ echo "#define TARGET_CRIS 1" >> $config_h
+ echo "CONFIG_SOFTFLOAT=yes" >> $config_mak
+ echo "#define CONFIG_SOFTFLOAT 1" >> $config_h
+elif test "$target_cpu" = "m68k" ; then
+ echo "TARGET_ARCH=m68k" >> $config_mak
+ echo "#define TARGET_ARCH \"m68k\"" >> $config_h
+ echo "#define TARGET_M68K 1" >> $config_h
+ bflt="yes"
+elif test "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" ; then
+ echo "TARGET_ARCH=mips" >> $config_mak
+ echo "#define TARGET_ARCH \"mips\"" >> $config_h
+ echo "#define TARGET_MIPS 1" >> $config_h
+ echo "#define TARGET_ABI_MIPSO32 1" >> $config_h
+elif test "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" ; then
+ echo "TARGET_ARCH=mipsn32" >> $config_mak
+ echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
+ echo "#define TARGET_MIPS 1" >> $config_h
+ echo "#define TARGET_ABI_MIPSN32 1" >> $config_h
+elif test "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el" ; then
+ echo "TARGET_ARCH=mips64" >> $config_mak
+ echo "#define TARGET_ARCH \"mips64\"" >> $config_h
+ echo "#define TARGET_MIPS 1" >> $config_h
+ echo "#define TARGET_MIPS64 1" >> $config_h
+ echo "#define TARGET_ABI_MIPSN64 1" >> $config_h
elif test "$target_cpu" = "ppc" ; then
echo "TARGET_ARCH=ppc" >> $config_mak
echo "#define TARGET_ARCH \"ppc\"" >> $config_h
@@ -1178,50 +1209,29 @@
echo "#define TARGET_PPC 1" >> $config_h
echo "#define TARGET_PPC64 1" >> $config_h
echo "#define TARGET_ABI32 1" >> $config_h
-elif test "$target_cpu" = "x86_64" ; then
- echo "TARGET_ARCH=x86_64" >> $config_mak
- echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
- echo "#define TARGET_I386 1" >> $config_h
- echo "#define TARGET_X86_64 1" >> $config_h
- if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then
- echo "#define USE_KQEMU 1" >> $config_h
- fi
-elif test "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" ; then
- echo "TARGET_ARCH=mips" >> $config_mak
- echo "#define TARGET_ARCH \"mips\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_ABI_MIPSO32 1" >> $config_h
-elif test "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" ; then
- echo "TARGET_ARCH=mipsn32" >> $config_mak
- echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_ABI_MIPSN32 1" >> $config_h
-elif test "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el" ; then
- echo "TARGET_ARCH=mips64" >> $config_mak
- echo "#define TARGET_ARCH \"mips64\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_MIPS64 1" >> $config_h
- echo "#define TARGET_ABI_MIPSN64 1" >> $config_h
-elif test "$target_cpu" = "cris" ; then
- echo "TARGET_ARCH=cris" >> $config_mak
- echo "#define TARGET_ARCH \"cris\"" >> $config_h
- echo "#define TARGET_CRIS 1" >> $config_h
- echo "CONFIG_SOFTFLOAT=yes" >> $config_mak
- echo "#define CONFIG_SOFTFLOAT 1" >> $config_h
elif test "$target_cpu" = "sh4" -o "$target_cpu" = "sh4eb" ; then
echo "TARGET_ARCH=sh4" >> $config_mak
echo "#define TARGET_ARCH \"sh4\"" >> $config_h
echo "#define TARGET_SH4 1" >> $config_h
bflt="yes"
-elif test "$target_cpu" = "m68k" ; then
- echo "TARGET_ARCH=m68k" >> $config_mak
- echo "#define TARGET_ARCH \"m68k\"" >> $config_h
- echo "#define TARGET_M68K 1" >> $config_h
- bflt="yes"
-elif test "$target_cpu" = "alpha" ; then
- echo "TARGET_ARCH=alpha" >> $config_mak
- echo "#define TARGET_ARCH \"alpha\"" >> $config_h
- echo "#define TARGET_ALPHA 1" >> $config_h
+elif test "$target_cpu" = "sparc" ; then
+ echo "TARGET_ARCH=sparc" >> $config_mak
+ echo "#define TARGET_ARCH \"sparc\"" >> $config_h
+ echo "#define TARGET_SPARC 1" >> $config_h
+elif test "$target_cpu" = "sparc64" ; then
+ echo "TARGET_ARCH=sparc64" >> $config_mak
+ echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
+ echo "#define TARGET_SPARC 1" >> $config_h
+ echo "#define TARGET_SPARC64 1" >> $config_h
+ elfload32="yes"
+elif test "$target_cpu" = "sparc32plus" ; then
+ echo "TARGET_ARCH=sparc64" >> $config_mak
+ echo "TARGET_ABI_DIR=sparc" >> $config_mak
+ echo "TARGET_ARCH2=sparc32plus" >> $config_mak
+ echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
+ echo "#define TARGET_SPARC 1" >> $config_h
+ echo "#define TARGET_SPARC64 1" >> $config_h
+ echo "#define TARGET_ABI32 1" >> $config_h
else
echo "Unsupported target CPU"
exit 1
@@ -1247,7 +1257,18 @@
echo "#define CONFIG_DARWIN_USER 1" >> $config_h
fi
-if test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" -o "$target_cpu" = "sparc" -o "$target_cpu" = "sparc64" -o "$target_cpu" = "sparc32plus" -o "$target_cpu" = "m68k" -o "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" -o "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" -o "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el"; then
+if test "$target_cpu" = "arm" \
+ -o "$target_cpu" = "armeb" \
+ -o "$target_cpu" = "m68k" \
+ -o "$target_cpu" = "mips" \
+ -o "$target_cpu" = "mipsel" \
+ -o "$target_cpu" = "mipsn32" \
+ -o "$target_cpu" = "mipsn32el" \
+ -o "$target_cpu" = "mips64" \
+ -o "$target_cpu" = "mips64el" \
+ -o "$target_cpu" = "sparc" \
+ -o "$target_cpu" = "sparc64" \
+ -o "$target_cpu" = "sparc32plus"; then
echo "CONFIG_SOFTFLOAT=yes" >> $config_mak
echo "#define CONFIG_SOFTFLOAT 1" >> $config_h
fi
reply other threads:[~2008-04-11 21:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1JkQul-0002Z5-4j@cvs.savannah.gnu.org \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).