From: Anthony Liguori <anthony@codemonkey.ws>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [7229] implement qemu_blockalign (Stefano Stabellini)
Date: Wed, 22 Apr 2009 20:20:01 +0000 [thread overview]
Message-ID: <E1LwivJ-0007nb-19@cvs.savannah.gnu.org> (raw)
Revision: 7229
http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=7229
Author: aliguori
Date: 2009-04-22 20:20:00 +0000 (Wed, 22 Apr 2009)
Log Message:
-----------
implement qemu_blockalign (Stefano Stabellini)
this patch adds a buffer_alignment field to BlockDriverState and
implements a qemu_blockalign function that uses that field to allocate a
memory aligned buffer to be used by the block driver.
buffer_alignment is initialized to 512 but each block driver can set
a different value (at the moment none of them do).
This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to
use qemu_blockalign instead of qemu_memalign.
There is only one place left that still uses qemu_memalign to allocate
buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw
because it is not possible to get the BlockDriverState from that
function. However I think it is not important because posix-aio-compat
already deals with driver specific code so it is supposed to know its
own needs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Modified Paths:
--------------
trunk/block-qcow.c
trunk/block-qcow2.c
trunk/block-raw-posix.c
trunk/block.c
trunk/block_int.h
trunk/hw/ide.c
Modified: trunk/block-qcow.c
===================================================================
--- trunk/block-qcow.c 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/block-qcow.c 2009-04-22 20:20:00 UTC (rev 7229)
@@ -641,7 +641,7 @@
acb->sector_num = sector_num;
acb->qiov = qiov;
if (qiov->niov > 1)
- acb->buf = acb->orig_buf = qemu_memalign(512, qiov->size);
+ acb->buf = acb->orig_buf = qemu_blockalign(bs, qiov->size);
else
acb->buf = (uint8_t *)qiov->iov->iov_base;
acb->nb_sectors = nb_sectors;
@@ -736,7 +736,7 @@
acb->sector_num = sector_num;
acb->qiov = qiov;
if (qiov->niov > 1) {
- acb->buf = acb->orig_buf = qemu_memalign(512, qiov->size);
+ acb->buf = acb->orig_buf = qemu_blockalign(bs, qiov->size);
qemu_iovec_to_buffer(qiov, acb->buf);
} else {
acb->buf = (uint8_t *)qiov->iov->iov_base;
Modified: trunk/block-qcow2.c
===================================================================
--- trunk/block-qcow2.c 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/block-qcow2.c 2009-04-22 20:20:00 UTC (rev 7229)
@@ -1412,7 +1412,7 @@
acb->sector_num = sector_num;
acb->qiov = qiov;
if (qiov->niov > 1) {
- acb->buf = acb->orig_buf = qemu_memalign(512, qiov->size);
+ acb->buf = acb->orig_buf = qemu_blockalign(bs, qiov->size);
if (is_write)
qemu_iovec_to_buffer(qiov, acb->buf);
} else {
Modified: trunk/block-raw-posix.c
===================================================================
--- trunk/block-raw-posix.c 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/block-raw-posix.c 2009-04-22 20:20:00 UTC (rev 7229)
@@ -165,7 +165,7 @@
s->fd = fd;
s->aligned_buf = NULL;
if ((flags & BDRV_O_NOCACHE)) {
- s->aligned_buf = qemu_memalign(512, ALIGNED_BUFFER_SIZE);
+ s->aligned_buf = qemu_blockalign(bs, ALIGNED_BUFFER_SIZE);
if (s->aligned_buf == NULL) {
ret = -errno;
close(fd);
Modified: trunk/block.c
===================================================================
--- trunk/block.c 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/block.c 2009-04-22 20:20:00 UTC (rev 7229)
@@ -362,6 +362,8 @@
bs->is_temporary = 0;
bs->encrypted = 0;
bs->valid_key = 0;
+ /* buffer_alignment defaulted to 512, drivers can change this value */
+ bs->buffer_alignment = 512;
if (flags & BDRV_O_SNAPSHOT) {
BlockDriverState *bs1;
@@ -1390,7 +1392,7 @@
acb = qemu_aio_get(bs, cb, opaque);
acb->is_write = is_write;
acb->qiov = qiov;
- acb->bounce = qemu_memalign(512, qiov->size);
+ acb->bounce = qemu_blockalign(bs, qiov->size);
if (!acb->bh)
acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
@@ -1640,3 +1642,8 @@
return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
return NULL;
}
+
+void *qemu_blockalign(BlockDriverState *bs, size_t size)
+{
+ return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
+}
Modified: trunk/block_int.h
===================================================================
--- trunk/block_int.h 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/block_int.h 2009-04-22 20:20:00 UTC (rev 7229)
@@ -145,6 +145,9 @@
/* Whether the disk can expand beyond total_sectors */
int growable;
+ /* the memory alignment required for the buffers handled by this driver */
+ int buffer_alignment;
+
/* NOTE: the following infos are only hints for real hardware
drivers. They are not used by the block driver */
int cyls, heads, secs, translation;
@@ -173,6 +176,8 @@
BlockDriverCompletionFunc *cb, void *opaque);
void qemu_aio_release(void *p);
+void *qemu_blockalign(BlockDriverState *bs, size_t size);
+
extern BlockDriverState *bdrv_first;
#endif /* BLOCK_INT_H */
Modified: trunk/hw/ide.c
===================================================================
--- trunk/hw/ide.c 2009-04-22 15:19:53 UTC (rev 7228)
+++ trunk/hw/ide.c 2009-04-22 20:20:00 UTC (rev 7229)
@@ -2788,11 +2788,11 @@
for(i = 0; i < 2; i++) {
s = ide_state + i;
- s->io_buffer = qemu_memalign(512, IDE_DMA_BUF_SECTORS*512 + 4);
if (i == 0)
s->bs = hd0;
else
s->bs = hd1;
+ s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
if (s->bs) {
bdrv_get_geometry(s->bs, &nb_sectors);
bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
reply other threads:[~2009-04-22 20:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1LwivJ-0007nb-19@cvs.savannah.gnu.org \
--to=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).