From: "Namsun Ch'o" <namnamc@Safe-mail.net>
To: eduardo.otubo@profitbricks.com
Cc: pmoore@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v3] Add argument filters to the seccomp sandbox
Date: Fri, 25 Sep 2015 00:50:36 -0400 [thread overview]
Message-ID: <N1-mkYqRJp0gP@Safe-mail.net> (raw)
Here's the v3 patch. I applied it and compiled QEMU, and it worked fine.
Changes so far:
v1
- Created argument filters for the madvise, shmget, and shmctl syscalls.
v1 -> v2
- Added 5 new madvise flags which were present in the source code but not in
the strace which I generated.
- Added IP_CREAT|0600 to shmget, which Daniel Berrange pointed out was
present in GTK2, which QEMU uses but does not call directly.
v2 -> v3
- Replaced include asm/mman-common.h with sys/mman.h which is more proper.
- Fixed a stupid typo where I had IP_CREAT instead of IPC_CREAT.
- Removed the comma on the last entry of the madvise_flags array.
- Removed one madvise flag (MADV_INVALID) which doesn't exist, apparently.
Signed-off-by: Namsun Ch'o <namnamc@safe-mail.net>
---
diff --git a/qemu-seccomp.c b/qemu-seccomp.c
index f9de0d3..a353ef9 100644
--- a/qemu-seccomp.c
+++ b/qemu-seccomp.c
@@ -14,6 +14,8 @@
*/
#include <stdio.h>
#include <seccomp.h>
+#include <linux/ipc.h>
+#include <sys/mman.h>
#include "sysemu/seccomp.h"
struct QemuSeccompSyscall {
@@ -105,7 +107,6 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
{ SCMP_SYS(rt_sigreturn), 245 },
{ SCMP_SYS(sync), 245 },
{ SCMP_SYS(pread64), 245 },
- { SCMP_SYS(madvise), 245 },
{ SCMP_SYS(set_robust_list), 245 },
{ SCMP_SYS(lseek), 245 },
{ SCMP_SYS(pselect6), 245 },
@@ -224,11 +225,9 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
{ SCMP_SYS(arch_prctl), 240 },
{ SCMP_SYS(mkdir), 240 },
{ SCMP_SYS(fchmod), 240 },
- { SCMP_SYS(shmget), 240 },
{ SCMP_SYS(shmat), 240 },
{ SCMP_SYS(shmdt), 240 },
{ SCMP_SYS(timerfd_create), 240 },
- { SCMP_SYS(shmctl), 240 },
{ SCMP_SYS(mlockall), 240 },
{ SCMP_SYS(mlock), 240 },
{ SCMP_SYS(munlock), 240 },
@@ -264,6 +263,59 @@ int seccomp_start(void)
}
}
+ /* madvise */
+ static const int madvise_flags[] = {
+ MADV_DODUMP,
+ MADV_DONTDUMP,
+ MADV_UNMERGEABLE,
+ MADV_WILLNEED,
+ MADV_DONTFORK,
+ MADV_DONTNEED,
+ MADV_HUGEPAGE,
+ MADV_MERGEABLE
+ };
+ for (i = 0; i < ARRAY_SIZE(madvise_flags); i++) {
+ rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(madvise), 1,
+ SCMP_A2(SCMP_CMP_EQ, madvise_flags[i]));
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+ }
+ rc = seccomp_syscall_priority(ctx, SCMP_SYS(madvise), 245);
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+
+ /* shmget */
+ rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+ SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+ SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0777));
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+ rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+ SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+ SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0600));
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+ rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmget), 240);
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+
+ /* shmctl */
+ rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmctl), 2,
+ SCMP_A1(SCMP_CMP_EQ, IPC_RMID),
+ SCMP_A2(SCMP_CMP_EQ, 0));
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+ rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmctl), 240);
+ if (rc < 0) {
+ goto seccomp_return;
+ }
+
rc = seccomp_load(ctx);
seccomp_return:
next reply other threads:[~2015-09-25 4:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-25 4:50 Namsun Ch'o [this message]
2015-09-29 15:22 ` [Qemu-devel] [PATCH v3] Add argument filters to the seccomp sandbox Eduardo Otubo
2015-10-02 14:14 ` Eduardo Otubo
-- strict thread matches above, loose matches on Subject: below --
2015-09-30 8:40 Namsun Ch'o
2015-09-30 8:45 ` Daniel P. Berrange
2015-10-04 4:15 Namsun Ch'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=N1-mkYqRJp0gP@Safe-mail.net \
--to=namnamc@safe-mail.net \
--cc=eduardo.otubo@profitbricks.com \
--cc=pmoore@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).