Re: [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs

[David Gibson <david@gibson.dropbear.id.au>]

[-- Attachment #1: Type: text/plain, Size: 6804 bytes --]

On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
> In VIA super south bridge the io ranges of superio components
> (parallel and serial ports and FDC) can be controlled by superio
> config registers to set their base address and enable/disable them.
> This is not easy to implement in QEMU because ISA emulation is only
> designed to set io base address once on creating the device and io
> ranges are registered at creation and cannot easily be disabled or
> moved later.
> 
> In this patch we hack around that but only for serial ports because
> those have a single io range at port base that's relatively easy to
> handle and it's what guests actually use and set address different
> than the default.
> 
> We do not attempt to handle controlling the parallel and FDC regions
> because those have multiple io ranges so handling them would be messy
> and guests either don't change their deafult or don't care. We could
> even get away with disabling and not emulating them, but since they
> are already there, this patch leaves them mapped at their default
> address just in case this could be useful for a guest in the future.
> 
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>

The maintainers of the hw/isa/vt82c686.c should probably be CCed on this.

> ---
>  hw/isa/vt82c686.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 82 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
> index 5db9b1706c..98bd57a074 100644
> --- a/hw/isa/vt82c686.c
> +++ b/hw/isa/vt82c686.c
> @@ -252,8 +252,24 @@ static const TypeInfo vt8231_pm_info = {
>  typedef struct SuperIOConfig {
>      uint8_t regs[0x100];
>      MemoryRegion io;
> +    ISASuperIODevice *superio;
> +    MemoryRegion *serial_io[SUPERIO_MAX_SERIAL_PORTS];
>  } SuperIOConfig;
>  
> +static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
> +                                    int offs)
> +{
> +    MemoryRegion *subregion, *mr = NULL;
> +
> +    QTAILQ_FOREACH(subregion, &parent->subregions, subregions_link) {
> +        if (subregion->addr == offs) {
> +            mr = subregion;
> +            break;
> +        }
> +    }
> +    return mr;
> +}
> +
>  static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
>                                unsigned size)
>  {
> @@ -279,7 +295,53 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
>      case 0xfd ... 0xff:
>          /* ignore write to read only registers */
>          return;
> -    /* case 0xe6 ... 0xe8: Should set base port of parallel and serial */
> +    case 0xe2:
> +    {
> +        data &= 0x1f;
> +        if (data & BIT(2)) { /* Serial port 1 enable */
> +            ISADevice *dev = sc->superio->serial[0];
> +            if (!memory_region_is_mapped(sc->serial_io[0])) {
> +                memory_region_add_subregion(isa_address_space_io(dev),
> +                                            dev->ioport_id, sc->serial_io[0]);
> +            }
> +        } else {
> +            MemoryRegion *io = isa_address_space_io(sc->superio->serial[0]);
> +            if (memory_region_is_mapped(sc->serial_io[0])) {
> +                memory_region_del_subregion(io, sc->serial_io[0]);
> +            }
> +        }
> +        if (data & BIT(3)) { /* Serial port 2 enable */
> +            ISADevice *dev = sc->superio->serial[1];
> +            if (!memory_region_is_mapped(sc->serial_io[1])) {
> +                memory_region_add_subregion(isa_address_space_io(dev),
> +                                            dev->ioport_id, sc->serial_io[1]);
> +            }
> +        } else {
> +            MemoryRegion *io = isa_address_space_io(sc->superio->serial[1]);
> +            if (memory_region_is_mapped(sc->serial_io[1])) {
> +                memory_region_del_subregion(io, sc->serial_io[1]);
> +            }
> +        }
> +        break;
> +    }
> +    case 0xe7: /* Serial port 1 io base address */
> +    {
> +        data &= 0xfe;
> +        sc->superio->serial[0]->ioport_id = data << 2;
> +        if (memory_region_is_mapped(sc->serial_io[0])) {
> +            memory_region_set_address(sc->serial_io[0], data << 2);
> +        }
> +        break;
> +    }
> +    case 0xe8: /* Serial port 2 io base address */
> +    {
> +        data &= 0xfe;
> +        sc->superio->serial[1]->ioport_id = data << 2;
> +        if (memory_region_is_mapped(sc->serial_io[1])) {
> +            memory_region_set_address(sc->serial_io[1], data << 2);
> +        }
> +        break;
> +    }
>      default:
>          qemu_log_mask(LOG_UNIMP,
>                        "via_superio_cfg: unimplemented register 0x%x\n", idx);
> @@ -385,6 +447,7 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>      DeviceState *dev = DEVICE(d);
>      ISABus *isa_bus;
>      qemu_irq *isa_irq;
> +    ISASuperIOClass *ic;
>      int i;
>  
>      qdev_init_gpio_out(dev, &s->cpu_intr, 1);
> @@ -394,7 +457,9 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>      isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
>      i8254_pit_init(isa_bus, 0x40, 0, NULL);
>      i8257_dma_init(isa_bus, 0);
> -    isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
> +    s->superio_cfg.superio = ISA_SUPERIO(isa_create_simple(isa_bus,
> +                                                      TYPE_VT82C686B_SUPERIO));
> +    ic = ISA_SUPERIO_GET_CLASS(s->superio_cfg.superio);
>      mc146818_rtc_init(isa_bus, 2000, NULL);
>  
>      for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
> @@ -412,6 +477,21 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>       */
>      memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
>                                  &s->superio_cfg.io);
> +
> +    /* Grab io regions of serial devices so we can control them */
> +    for (i = 0; i < ic->serial.count; i++) {
> +        ISADevice *sd = s->superio_cfg.superio->serial[i];
> +        MemoryRegion *io = isa_address_space_io(sd);
> +        MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
> +        if (!mr) {
> +            error_setg(errp, "Could not get io region for serial %d", i);
> +            return;
> +        }
> +        s->superio_cfg.serial_io[i] = mr;
> +        if (memory_region_is_mapped(mr)) {
> +            memory_region_del_subregion(io, mr);
> +        }
> +    }
>  }
>  
>  static void via_class_init(ObjectClass *klass, void *data)

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]