From: David Gibson <david@gibson.dropbear.id.au>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [PATCH v5 10/10] target/ppc: Validate hflags with CONFIG_DEBUG_TCG
Date: Thu, 25 Mar 2021 19:47:50 +1100 [thread overview]
Message-ID: <YFxONrbZarGMH34O@yekko.fritz.box> (raw)
In-Reply-To: <YFqD5JOVEXVFv9Tr@yekko.fritz.box>
[-- Attachment #1: Type: text/plain, Size: 3597 bytes --]
On Wed, Mar 24, 2021 at 11:12:20AM +1100, David Gibson wrote:
> On Tue, Mar 23, 2021 at 12:43:40PM -0600, Richard Henderson wrote:
> > Verify that hflags was updated correctly whenever we change
> > cpu state that is used by hflags.
> >
> > Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>
> Applied to ppc-for-6.0, thanks.
Alas, this appears to cause a failure in the 'build-user' test on
gitlab CI :(. I haven't managed to reproduce it locally, so I'm not
sure what's going on.
>
> > ---
> > target/ppc/cpu.h | 5 +++++
> > target/ppc/helper_regs.c | 29 +++++++++++++++++++++++++++--
> > 2 files changed, 32 insertions(+), 2 deletions(-)
> >
> > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > index 3d021f61f3..69fc9a2831 100644
> > --- a/target/ppc/cpu.h
> > +++ b/target/ppc/cpu.h
> > @@ -2425,6 +2425,10 @@ void cpu_write_xer(CPUPPCState *env, target_ulong xer);
> > */
> > #define is_book3s_arch2x(ctx) (!!((ctx)->insns_flags & PPC_SEGMENT_64B))
> >
> > +#ifdef CONFIG_DEBUG_TCG
> > +void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
> > + target_ulong *cs_base, uint32_t *flags);
> > +#else
> > static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
> > target_ulong *cs_base, uint32_t *flags)
> > {
> > @@ -2432,6 +2436,7 @@ static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
> > *cs_base = 0;
> > *flags = env->hflags;
> > }
> > +#endif
> >
> > void QEMU_NORETURN raise_exception(CPUPPCState *env, uint32_t exception);
> > void QEMU_NORETURN raise_exception_ra(CPUPPCState *env, uint32_t exception,
> > diff --git a/target/ppc/helper_regs.c b/target/ppc/helper_regs.c
> > index 5411a67e9a..3723872aa6 100644
> > --- a/target/ppc/helper_regs.c
> > +++ b/target/ppc/helper_regs.c
> > @@ -43,7 +43,7 @@ void hreg_swap_gpr_tgpr(CPUPPCState *env)
> > env->tgpr[3] = tmp;
> > }
> >
> > -void hreg_compute_hflags(CPUPPCState *env)
> > +static uint32_t hreg_compute_hflags_value(CPUPPCState *env)
> > {
> > target_ulong msr = env->msr;
> > uint32_t ppc_flags = env->flags;
> > @@ -155,9 +155,34 @@ void hreg_compute_hflags(CPUPPCState *env)
> > hflags |= dmmu_idx << HFLAGS_DMMU_IDX;
> > #endif
> >
> > - env->hflags = hflags | (msr & msr_mask);
> > + return hflags | (msr & msr_mask);
> > }
> >
> > +void hreg_compute_hflags(CPUPPCState *env)
> > +{
> > + env->hflags = hreg_compute_hflags_value(env);
> > +}
> > +
> > +#ifdef CONFIG_DEBUG_TCG
> > +void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
> > + target_ulong *cs_base, uint32_t *flags)
> > +{
> > + uint32_t hflags_current = env->hflags;
> > + uint32_t hflags_rebuilt;
> > +
> > + *pc = env->nip;
> > + *cs_base = 0;
> > + *flags = hflags_current;
> > +
> > + hflags_rebuilt = hreg_compute_hflags_value(env);
> > + if (unlikely(hflags_current != hflags_rebuilt)) {
> > + cpu_abort(env_cpu(env),
> > + "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n",
> > + hflags_current, hflags_rebuilt);
> > + }
> > +}
> > +#endif
> > +
> > void cpu_interrupt_exittb(CPUState *cs)
> > {
> > if (!kvm_enabled()) {
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2021-03-25 22:05 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-23 18:43 [PATCH v5 00/10] target/ppc: Fix truncation of env->hflags Richard Henderson
2021-03-23 18:43 ` [PATCH v5 01/10] target/ppc: Extract post_load_update_msr Richard Henderson
2021-03-24 0:00 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 02/10] target/ppc: Disconnect hflags from MSR Richard Henderson
2021-03-24 0:03 ` David Gibson
2021-03-29 13:05 ` Greg Kurz
2021-03-29 16:26 ` Richard Henderson
2021-03-30 4:54 ` David Gibson
2021-03-30 15:01 ` Richard Henderson
2021-03-31 0:09 ` David Gibson
2021-03-31 4:04 ` Greg Kurz
2021-03-31 4:47 ` David Gibson
2021-03-31 6:31 ` Richard Henderson
2021-04-01 3:17 ` David Gibson
2021-03-31 7:30 ` Greg Kurz
2021-03-23 18:43 ` [PATCH v5 03/10] target/ppc: Reduce env->hflags to uint32_t Richard Henderson
2021-03-24 0:03 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 04/10] target/ppc: Put dbcr0 single-step bits into hflags Richard Henderson
2021-03-24 0:04 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 05/10] target/ppc: Create helper_scv Richard Henderson
2021-03-24 0:05 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 06/10] target/ppc: Put LPCR[GTSE] in hflags Richard Henderson
2021-03-24 0:06 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 07/10] target/ppc: Remove MSR_SA and MSR_AP from hflags Richard Henderson
2021-03-24 0:08 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 08/10] target/ppc: Remove env->immu_idx and env->dmmu_idx Richard Henderson
2021-03-24 0:09 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 09/10] linux-user/ppc: Fix msr updates for signal handling Richard Henderson
2021-03-24 0:10 ` David Gibson
2021-03-23 18:43 ` [PATCH v5 10/10] target/ppc: Validate hflags with CONFIG_DEBUG_TCG Richard Henderson
2021-03-24 0:12 ` David Gibson
2021-03-25 8:47 ` David Gibson [this message]
2021-03-26 12:41 ` Richard Henderson
2021-03-27 12:46 ` Richard Henderson
2021-03-28 13:09 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YFxONrbZarGMH34O@yekko.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).