From: Vivek Goyal <vgoyal@redhat.com>
To: Max Reitz <mreitz@redhat.com>
Cc: virtio-fs@redhat.com, qemu-devel@nongnu.org,
Stefan Hajnoczi <stefanha@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>
Subject: Re: [PATCH v3 03/10] virtiofsd: Use lo_inode_open() instead of openat()
Date: Fri, 6 Aug 2021 11:42:32 -0400 [thread overview]
Message-ID: <YQ1YaG8cHxfXsw+9@redhat.com> (raw)
In-Reply-To: <20210730150134.216126-4-mreitz@redhat.com>
On Fri, Jul 30, 2021 at 05:01:27PM +0200, Max Reitz wrote:
> The xattr functions want a non-O_PATH FD, so they reopen the lo_inode.fd
> with the flags they need through /proc/self/fd.
>
> Similarly, lo_opendir() needs an O_RDONLY FD. Instead of the
> /proc/self/fd trick, it just uses openat(fd, "."), because the FD is
> guaranteed to be a directory, so this works.
Ok, given now lo_opendir() will use lo_inode_open(), it will switch
to using proc O_PATH fd trick. I guess that should be fine.
Vivek
>
> All cases have one problem in common, though: In the future, when we may
> have a file handle in the lo_inode instead of an FD, querying an
> lo_inode FD may incur an open_by_handle_at() call. It does not make
> sense to then reopen that FD with custom flags, those should have been
> passed to open_by_handle_at() instead.
>
> Use lo_inode_open() instead of openat(). As part of the file handle
> change, lo_inode_open() will be made to invoke openat() only if
> lo_inode.fd is valid. Otherwise, it will invoke open_by_handle_at()
> with the right flags from the start.
>
> Consequently, after this patch, lo_inode_open() is the only place to
> invoke openat() to reopen an existing FD with different flags.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
> tools/virtiofsd/passthrough_ll.c | 43 ++++++++++++++++++++------------
> 1 file changed, 27 insertions(+), 16 deletions(-)
>
> diff --git a/tools/virtiofsd/passthrough_ll.c b/tools/virtiofsd/passthrough_ll.c
> index fb5e073e6a..a444c3a7e2 100644
> --- a/tools/virtiofsd/passthrough_ll.c
> +++ b/tools/virtiofsd/passthrough_ll.c
> @@ -1729,18 +1729,26 @@ static void lo_opendir(fuse_req_t req, fuse_ino_t ino,
> {
> int error = ENOMEM;
> struct lo_data *lo = lo_data(req);
> - struct lo_dirp *d;
> + struct lo_inode *inode;
> + struct lo_dirp *d = NULL;
> int fd;
> ssize_t fh;
>
> + inode = lo_inode(req, ino);
> + if (!inode) {
> + error = EBADF;
> + goto out_err;
> + }
> +
> d = calloc(1, sizeof(struct lo_dirp));
> if (d == NULL) {
> goto out_err;
> }
>
> - fd = openat(lo_fd(req, ino), ".", O_RDONLY);
> - if (fd == -1) {
> - goto out_errno;
> + fd = lo_inode_open(lo, inode, O_RDONLY);
> + if (fd < 0) {
> + error = -fd;
> + goto out_err;
> }
>
> d->dp = fdopendir(fd);
> @@ -1769,6 +1777,7 @@ static void lo_opendir(fuse_req_t req, fuse_ino_t ino,
> out_errno:
> error = errno;
> out_err:
> + lo_inode_put(lo, &inode);
> if (d) {
> if (d->dp) {
> closedir(d->dp);
> @@ -2973,7 +2982,6 @@ static void lo_getxattr(fuse_req_t req, fuse_ino_t ino, const char *in_name,
> }
> }
>
> - sprintf(procname, "%i", inode->fd);
> /*
> * It is not safe to open() non-regular/non-dir files in file server
> * unless O_PATH is used, so use that method for regular files/dir
> @@ -2981,13 +2989,15 @@ static void lo_getxattr(fuse_req_t req, fuse_ino_t ino, const char *in_name,
> * Otherwise, call fchdir() to avoid open().
> */
> if (S_ISREG(inode->filetype) || S_ISDIR(inode->filetype)) {
> - fd = openat(lo->proc_self_fd, procname, O_RDONLY);
> + fd = lo_inode_open(lo, inode, O_RDONLY);
> if (fd < 0) {
> - goto out_err;
> + saverr = -fd;
> + goto out;
> }
> ret = fgetxattr(fd, name, value, size);
> saverr = ret == -1 ? errno : 0;
> } else {
> + sprintf(procname, "%i", inode->fd);
> /* fchdir should not fail here */
> FCHDIR_NOFAIL(lo->proc_self_fd);
> ret = getxattr(procname, name, value, size);
> @@ -3054,15 +3064,16 @@ static void lo_listxattr(fuse_req_t req, fuse_ino_t ino, size_t size)
> }
> }
>
> - sprintf(procname, "%i", inode->fd);
> if (S_ISREG(inode->filetype) || S_ISDIR(inode->filetype)) {
> - fd = openat(lo->proc_self_fd, procname, O_RDONLY);
> + fd = lo_inode_open(lo, inode, O_RDONLY);
> if (fd < 0) {
> - goto out_err;
> + saverr = -fd;
> + goto out;
> }
> ret = flistxattr(fd, value, size);
> saverr = ret == -1 ? errno : 0;
> } else {
> + sprintf(procname, "%i", inode->fd);
> /* fchdir should not fail here */
> FCHDIR_NOFAIL(lo->proc_self_fd);
> ret = listxattr(procname, value, size);
> @@ -3211,14 +3222,14 @@ static void lo_setxattr(fuse_req_t req, fuse_ino_t ino, const char *in_name,
> * setxattr() on the link's filename there.
> */
> open_inode = S_ISREG(inode->filetype) || S_ISDIR(inode->filetype);
> - sprintf(procname, "%i", inode->fd);
> if (open_inode) {
> - fd = openat(lo->proc_self_fd, procname, O_RDONLY);
> + fd = lo_inode_open(lo, inode, O_RDONLY);
> if (fd < 0) {
> - saverr = errno;
> + saverr = -fd;
> goto out;
> }
> } else {
> + sprintf(procname, "%i", inode->fd);
> /* fchdir should not fail here */
> FCHDIR_NOFAIL(lo->proc_self_fd);
> }
> @@ -3317,16 +3328,16 @@ static void lo_removexattr(fuse_req_t req, fuse_ino_t ino, const char *in_name)
> fuse_log(FUSE_LOG_DEBUG, "lo_removexattr(ino=%" PRIu64 ", name=%s)\n", ino,
> name);
>
> - sprintf(procname, "%i", inode->fd);
> if (S_ISREG(inode->filetype) || S_ISDIR(inode->filetype)) {
> - fd = openat(lo->proc_self_fd, procname, O_RDONLY);
> + fd = lo_inode_open(lo, inode, O_RDONLY);
> if (fd < 0) {
> - saverr = errno;
> + saverr = -fd;
> goto out;
> }
> ret = fremovexattr(fd, name);
> saverr = ret == -1 ? errno : 0;
> } else {
> + sprintf(procname, "%i", inode->fd);
> /* fchdir should not fail here */
> FCHDIR_NOFAIL(lo->proc_self_fd);
> ret = removexattr(procname, name);
> --
> 2.31.1
>
next prev parent reply other threads:[~2021-08-06 15:43 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-30 15:01 [PATCH v3 00/10] virtiofsd: Allow using file handles instead of O_PATH FDs Max Reitz
2021-07-30 15:01 ` [PATCH v3 01/10] virtiofsd: Limit setxattr()'s creds-dropped region Max Reitz
2021-08-06 14:16 ` Vivek Goyal
2021-08-09 10:30 ` Max Reitz
2021-07-30 15:01 ` [PATCH v3 02/10] virtiofsd: Add TempFd structure Max Reitz
2021-08-06 14:41 ` Vivek Goyal
2021-08-09 10:44 ` Max Reitz
2021-07-30 15:01 ` [PATCH v3 03/10] virtiofsd: Use lo_inode_open() instead of openat() Max Reitz
2021-08-06 15:42 ` Vivek Goyal [this message]
2021-07-30 15:01 ` [PATCH v3 04/10] virtiofsd: Add lo_inode_fd() helper Max Reitz
2021-08-06 18:25 ` Vivek Goyal
2021-08-09 10:48 ` Max Reitz
2021-07-30 15:01 ` [PATCH v3 05/10] virtiofsd: Let lo_fd() return a TempFd Max Reitz
2021-07-30 15:01 ` [PATCH v3 06/10] virtiofsd: Let lo_inode_open() " Max Reitz
2021-08-06 19:55 ` Vivek Goyal
2021-08-09 13:40 ` Max Reitz
2021-07-30 15:01 ` [PATCH v3 07/10] virtiofsd: Add lo_inode.fhandle Max Reitz
2021-08-09 15:21 ` Vivek Goyal
2021-08-09 16:41 ` Hanna Reitz
2021-07-30 15:01 ` [PATCH v3 08/10] virtiofsd: Add inodes_by_handle hash table Max Reitz
2021-08-09 16:10 ` Vivek Goyal
2021-08-09 16:47 ` Hanna Reitz
2021-08-10 14:07 ` Vivek Goyal
2021-08-10 14:13 ` Hanna Reitz
2021-08-10 17:51 ` Vivek Goyal
2021-07-30 15:01 ` [PATCH v3 09/10] virtiofsd: Optionally fill lo_inode.fhandle Max Reitz
2021-08-09 18:41 ` Vivek Goyal
2021-08-10 8:32 ` Hanna Reitz
2021-08-10 15:23 ` Vivek Goyal
2021-08-10 15:26 ` Hanna Reitz
2021-08-10 15:57 ` Vivek Goyal
2021-08-11 6:41 ` Hanna Reitz
2021-08-16 19:44 ` Vivek Goyal
2021-08-17 8:27 ` Hanna Reitz
2021-08-17 19:45 ` Vivek Goyal
2021-08-18 0:14 ` Vivek Goyal
2021-08-18 13:32 ` Vivek Goyal
2021-08-18 13:48 ` Hanna Reitz
2021-08-19 16:38 ` Dr. David Alan Gilbert
2021-07-30 15:01 ` [PATCH v3 10/10] virtiofsd: Add lazy lo_do_find() Max Reitz
2021-08-09 19:08 ` Vivek Goyal
2021-08-10 8:38 ` Hanna Reitz
2021-08-10 14:12 ` Vivek Goyal
2021-08-10 14:17 ` Hanna Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YQ1YaG8cHxfXsw+9@redhat.com \
--to=vgoyal@redhat.com \
--cc=dgilbert@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=virtio-fs@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).