* [PATCH v9 1/3] monitor/hmp: add support for flag argument with value
2022-02-25 8:49 [PATCH v9 0/3] VNC-related HMP/QMP fixes Fabian Ebner
@ 2022-02-25 8:49 ` Fabian Ebner
2022-02-25 8:49 ` [PATCH v9 2/3] qapi/monitor: refactor set/expire_password with enums Fabian Ebner
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Fabian Ebner @ 2022-02-25 8:49 UTC (permalink / raw)
To: qemu-devel
Cc: w.bumiller, berrange, dgilbert, armbru, marcandre.lureau, kraxel,
pbonzini, marcandre.lureau, eblake, t.lamprecht
From: Stefan Reiter <s.reiter@proxmox.com>
Adds support for the "-xs" parameter type, where "-x" denotes a flag
name and the "s" suffix indicates that this flag is supposed to take
an arbitrary string parameter.
These parameters are always optional, the entry in the qdict will be
omitted if the flag is not given.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: fixed typo pointed out by Eric Blake
use s instead of V to indicate string parameter]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
---
v8 -> v9:
* Use s rather than V to indicate that the flag takes a value.
monitor/hmp.c | 19 ++++++++++++++++++-
monitor/monitor-internal.h | 3 ++-
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/monitor/hmp.c b/monitor/hmp.c
index b20737e63c..569066036d 100644
--- a/monitor/hmp.c
+++ b/monitor/hmp.c
@@ -981,6 +981,7 @@ static QDict *monitor_parse_arguments(Monitor *mon,
{
const char *tmp = p;
int skip_key = 0;
+ int ret;
/* option */
c = *typestr++;
@@ -1003,11 +1004,27 @@ static QDict *monitor_parse_arguments(Monitor *mon,
}
if (skip_key) {
p = tmp;
+ } else if (*typestr == 's') {
+ /* has option with string value */
+ typestr++;
+ tmp = p++;
+ while (qemu_isspace(*p)) {
+ p++;
+ }
+ ret = get_str(buf, sizeof(buf), &p);
+ if (ret < 0) {
+ monitor_printf(mon, "%s: value expected for -%c\n",
+ cmd->name, *tmp);
+ goto fail;
+ }
+ qdict_put_str(qdict, key, buf);
} else {
- /* has option */
+ /* has boolean option */
p++;
qdict_put_bool(qdict, key, true);
}
+ } else if (*typestr == 's') {
+ typestr++;
}
}
break;
diff --git a/monitor/monitor-internal.h b/monitor/monitor-internal.h
index 3da3f86c6a..caa2e90ef2 100644
--- a/monitor/monitor-internal.h
+++ b/monitor/monitor-internal.h
@@ -63,7 +63,8 @@
* '.' other form of optional type (for 'i' and 'l')
* 'b' boolean
* user mode accepts "on" or "off"
- * '-' optional parameter (eg. '-f')
+ * '-' optional parameter (eg. '-f'); if followed by a 's', it
+ * specifies an optional string param (e.g. '-fs' allows '-f foo')
*
*/
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v9 2/3] qapi/monitor: refactor set/expire_password with enums
2022-02-25 8:49 [PATCH v9 0/3] VNC-related HMP/QMP fixes Fabian Ebner
2022-02-25 8:49 ` [PATCH v9 1/3] monitor/hmp: add support for flag argument with value Fabian Ebner
@ 2022-02-25 8:49 ` Fabian Ebner
2022-02-25 8:49 ` [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password Fabian Ebner
2022-03-02 11:26 ` [PATCH v9 0/3] VNC-related HMP/QMP fixes Dr. David Alan Gilbert
3 siblings, 0 replies; 9+ messages in thread
From: Fabian Ebner @ 2022-02-25 8:49 UTC (permalink / raw)
To: qemu-devel
Cc: w.bumiller, berrange, dgilbert, armbru, marcandre.lureau, kraxel,
pbonzini, marcandre.lureau, eblake, t.lamprecht
From: Stefan Reiter <s.reiter@proxmox.com>
'protocol' and 'connected' are better suited as enums than as strings,
make use of that. No functional change intended.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
put 'keep' first in enum to ease use as a default]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
---
monitor/hmp-cmds.c | 29 +++++++++++++++++++++++++++--
monitor/qmp-cmds.c | 37 ++++++++++++-------------------------
qapi/ui.json | 36 ++++++++++++++++++++++++++++++++++--
3 files changed, 73 insertions(+), 29 deletions(-)
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index 8c384dc1b2..ff78741b75 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -1398,8 +1398,24 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
const char *password = qdict_get_str(qdict, "password");
const char *connected = qdict_get_try_str(qdict, "connected");
Error *err = NULL;
+ DisplayProtocol proto;
+ SetPasswordAction conn;
- qmp_set_password(protocol, password, !!connected, connected, &err);
+ proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
+ DISPLAY_PROTOCOL_VNC, &err);
+ if (err) {
+ goto out;
+ }
+
+ conn = qapi_enum_parse(&SetPasswordAction_lookup, connected,
+ SET_PASSWORD_ACTION_KEEP, &err);
+ if (err) {
+ goto out;
+ }
+
+ qmp_set_password(proto, password, !!connected, conn, &err);
+
+out:
hmp_handle_error(mon, err);
}
@@ -1408,8 +1424,17 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
const char *protocol = qdict_get_str(qdict, "protocol");
const char *whenstr = qdict_get_str(qdict, "time");
Error *err = NULL;
+ DisplayProtocol proto;
+
+ proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
+ DISPLAY_PROTOCOL_VNC, &err);
+ if (err) {
+ goto out;
+ }
- qmp_expire_password(protocol, whenstr, &err);
+ qmp_expire_password(proto, whenstr, &err);
+
+out:
hmp_handle_error(mon, err);
}
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index db4d186448..b6e8b57fcc 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -168,33 +168,27 @@ void qmp_system_wakeup(Error **errp)
qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
}
-void qmp_set_password(const char *protocol, const char *password,
- bool has_connected, const char *connected, Error **errp)
+void qmp_set_password(DisplayProtocol protocol, const char *password,
+ bool has_connected, SetPasswordAction connected,
+ Error **errp)
{
int disconnect_if_connected = 0;
int fail_if_connected = 0;
int rc;
if (has_connected) {
- if (strcmp(connected, "fail") == 0) {
- fail_if_connected = 1;
- } else if (strcmp(connected, "disconnect") == 0) {
- disconnect_if_connected = 1;
- } else if (strcmp(connected, "keep") == 0) {
- /* nothing */
- } else {
- error_setg(errp, QERR_INVALID_PARAMETER, "connected");
- return;
- }
+ fail_if_connected = connected == SET_PASSWORD_ACTION_FAIL;
+ disconnect_if_connected = connected == SET_PASSWORD_ACTION_DISCONNECT;
}
- if (strcmp(protocol, "spice") == 0) {
+ if (protocol == DISPLAY_PROTOCOL_SPICE) {
if (!qemu_using_spice(errp)) {
return;
}
rc = qemu_spice.set_passwd(password, fail_if_connected,
disconnect_if_connected);
- } else if (strcmp(protocol, "vnc") == 0) {
+ } else {
+ assert(protocol == DISPLAY_PROTOCOL_VNC);
if (fail_if_connected || disconnect_if_connected) {
/* vnc supports "connected=keep" only */
error_setg(errp, QERR_INVALID_PARAMETER, "connected");
@@ -203,10 +197,6 @@ void qmp_set_password(const char *protocol, const char *password,
/* Note that setting an empty password will not disable login through
* this interface. */
rc = vnc_display_password(NULL, password);
- } else {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
- "'vnc' or 'spice'");
- return;
}
if (rc != 0) {
@@ -214,7 +204,7 @@ void qmp_set_password(const char *protocol, const char *password,
}
}
-void qmp_expire_password(const char *protocol, const char *whenstr,
+void qmp_expire_password(DisplayProtocol protocol, const char *whenstr,
Error **errp)
{
time_t when;
@@ -230,17 +220,14 @@ void qmp_expire_password(const char *protocol, const char *whenstr,
when = strtoull(whenstr, NULL, 10);
}
- if (strcmp(protocol, "spice") == 0) {
+ if (protocol == DISPLAY_PROTOCOL_SPICE) {
if (!qemu_using_spice(errp)) {
return;
}
rc = qemu_spice.set_pw_expire(when);
- } else if (strcmp(protocol, "vnc") == 0) {
- rc = vnc_display_pw_expire(NULL, when);
} else {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
- "'vnc' or 'spice'");
- return;
+ assert(protocol == DISPLAY_PROTOCOL_VNC);
+ rc = vnc_display_pw_expire(NULL, when);
}
if (rc != 0) {
diff --git a/qapi/ui.json b/qapi/ui.json
index 9354f4c467..e112409211 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -9,6 +9,34 @@
{ 'include': 'common.json' }
{ 'include': 'sockets.json' }
+##
+# @DisplayProtocol:
+#
+# Display protocols which support changing password options.
+#
+# Since: 7.0
+#
+##
+{ 'enum': 'DisplayProtocol',
+ 'data': [ 'vnc', 'spice' ] }
+
+##
+# @SetPasswordAction:
+#
+# An action to take on changing a password on a connection with active clients.
+#
+# @keep: maintain existing clients
+#
+# @fail: fail the command if clients are connected
+#
+# @disconnect: disconnect existing clients
+#
+# Since: 7.0
+#
+##
+{ 'enum': 'SetPasswordAction',
+ 'data': [ 'keep', 'fail', 'disconnect' ] }
+
##
# @set_password:
#
@@ -38,7 +66,9 @@
#
##
{ 'command': 'set_password',
- 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
+ 'data': { 'protocol': 'DisplayProtocol',
+ 'password': 'str',
+ '*connected': 'SetPasswordAction' } }
##
# @expire_password:
@@ -71,7 +101,9 @@
# <- { "return": {} }
#
##
-{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
+{ 'command': 'expire_password',
+ 'data': { 'protocol': 'DisplayProtocol',
+ 'time': 'str' } }
##
# @screendump:
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password
2022-02-25 8:49 [PATCH v9 0/3] VNC-related HMP/QMP fixes Fabian Ebner
2022-02-25 8:49 ` [PATCH v9 1/3] monitor/hmp: add support for flag argument with value Fabian Ebner
2022-02-25 8:49 ` [PATCH v9 2/3] qapi/monitor: refactor set/expire_password with enums Fabian Ebner
@ 2022-02-25 8:49 ` Fabian Ebner
2022-02-25 11:34 ` Markus Armbruster
2022-03-01 11:29 ` Dr. David Alan Gilbert
2022-03-02 11:26 ` [PATCH v9 0/3] VNC-related HMP/QMP fixes Dr. David Alan Gilbert
3 siblings, 2 replies; 9+ messages in thread
From: Fabian Ebner @ 2022-02-25 8:49 UTC (permalink / raw)
To: qemu-devel
Cc: w.bumiller, berrange, dgilbert, armbru, marcandre.lureau, kraxel,
pbonzini, marcandre.lureau, eblake, t.lamprecht
From: Stefan Reiter <s.reiter@proxmox.com>
It is possible to specify more than one VNC server on the command line,
either with an explicit ID or the auto-generated ones à la "default",
"vnc2", "vnc3", ...
It is not possible to change the password on one of these extra VNC
displays though. Fix this by adding a "display" parameter to the
"set_password" and "expire_password" QMP and HMP commands.
For HMP, the display is specified using the "-d" value flag.
For QMP, the schema is updated to explicitly express the supported
variants of the commands with protocol-discriminated unions.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
make @connected a common member of @SetPasswordOptions]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
---
v8 -> v9:
* Make @connected a common member of @SetPasswordOptions.
* Use s rather than V to indicate that the flag takes a string value.
hmp-commands.hx | 24 ++++++------
monitor/hmp-cmds.c | 40 +++++++++++++------
monitor/qmp-cmds.c | 34 +++++++---------
qapi/ui.json | 96 +++++++++++++++++++++++++++++++++++-----------
4 files changed, 129 insertions(+), 65 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 70a9136ac2..8476277aa9 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1514,33 +1514,35 @@ ERST
{
.name = "set_password",
- .args_type = "protocol:s,password:s,connected:s?",
- .params = "protocol password action-if-connected",
+ .args_type = "protocol:s,password:s,display:-ds,connected:s?",
+ .params = "protocol password [-d display] [action-if-connected]",
.help = "set spice/vnc password",
.cmd = hmp_set_password,
},
SRST
-``set_password [ vnc | spice ] password [ action-if-connected ]``
- Change spice/vnc password. *action-if-connected* specifies what
- should happen in case a connection is established: *fail* makes the
- password change fail. *disconnect* changes the password and
+``set_password [ vnc | spice ] password [ -d display ] [ action-if-connected ]``
+ Change spice/vnc password. *display* can be used with 'vnc' to specify
+ which display to set the password on. *action-if-connected* specifies
+ what should happen in case a connection is established: *fail* makes
+ the password change fail. *disconnect* changes the password and
disconnects the client. *keep* changes the password and keeps the
connection up. *keep* is the default.
ERST
{
.name = "expire_password",
- .args_type = "protocol:s,time:s",
- .params = "protocol time",
+ .args_type = "protocol:s,time:s,display:-ds",
+ .params = "protocol time [-d display]",
.help = "set spice/vnc password expire-time",
.cmd = hmp_expire_password,
},
SRST
-``expire_password [ vnc | spice ]`` *expire-time*
- Specify when a password for spice/vnc becomes
- invalid. *expire-time* accepts:
+``expire_password [ vnc | spice ] expire-time [ -d display ]``
+ Specify when a password for spice/vnc becomes invalid.
+ *display* behaves the same as in ``set_password``.
+ *expire-time* accepts:
``now``
Invalidate password instantly.
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index ff78741b75..634968498b 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -1396,24 +1396,33 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *password = qdict_get_str(qdict, "password");
+ const char *display = qdict_get_try_str(qdict, "display");
const char *connected = qdict_get_try_str(qdict, "connected");
Error *err = NULL;
- DisplayProtocol proto;
- SetPasswordAction conn;
- proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
- DISPLAY_PROTOCOL_VNC, &err);
+ SetPasswordOptions opts = {
+ .password = (char *)password,
+ .has_connected = !!connected,
+ };
+
+ opts.connected = qapi_enum_parse(&SetPasswordAction_lookup, connected,
+ SET_PASSWORD_ACTION_KEEP, &err);
if (err) {
goto out;
}
- conn = qapi_enum_parse(&SetPasswordAction_lookup, connected,
- SET_PASSWORD_ACTION_KEEP, &err);
+ opts.protocol = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
+ DISPLAY_PROTOCOL_VNC, &err);
if (err) {
goto out;
}
- qmp_set_password(proto, password, !!connected, conn, &err);
+ if (opts.protocol == DISPLAY_PROTOCOL_VNC) {
+ opts.u.vnc.has_display = !!display;
+ opts.u.vnc.display = (char *)display;
+ }
+
+ qmp_set_password(&opts, &err);
out:
hmp_handle_error(mon, err);
@@ -1423,16 +1432,25 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *whenstr = qdict_get_str(qdict, "time");
+ const char *display = qdict_get_try_str(qdict, "display");
Error *err = NULL;
- DisplayProtocol proto;
- proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
- DISPLAY_PROTOCOL_VNC, &err);
+ ExpirePasswordOptions opts = {
+ .time = (char *)whenstr,
+ };
+
+ opts.protocol = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
+ DISPLAY_PROTOCOL_VNC, &err);
if (err) {
goto out;
}
- qmp_expire_password(proto, whenstr, &err);
+ if (opts.protocol == DISPLAY_PROTOCOL_VNC) {
+ opts.u.vnc.has_display = !!display;
+ opts.u.vnc.display = (char *)display;
+ }
+
+ qmp_expire_password(&opts, &err);
out:
hmp_handle_error(mon, err);
diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
index b6e8b57fcc..df97582dd4 100644
--- a/monitor/qmp-cmds.c
+++ b/monitor/qmp-cmds.c
@@ -168,35 +168,27 @@ void qmp_system_wakeup(Error **errp)
qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
}
-void qmp_set_password(DisplayProtocol protocol, const char *password,
- bool has_connected, SetPasswordAction connected,
- Error **errp)
+void qmp_set_password(SetPasswordOptions *opts, Error **errp)
{
- int disconnect_if_connected = 0;
- int fail_if_connected = 0;
int rc;
- if (has_connected) {
- fail_if_connected = connected == SET_PASSWORD_ACTION_FAIL;
- disconnect_if_connected = connected == SET_PASSWORD_ACTION_DISCONNECT;
- }
-
- if (protocol == DISPLAY_PROTOCOL_SPICE) {
+ if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
if (!qemu_using_spice(errp)) {
return;
}
- rc = qemu_spice.set_passwd(password, fail_if_connected,
- disconnect_if_connected);
+ rc = qemu_spice.set_passwd(opts->password,
+ opts->connected == SET_PASSWORD_ACTION_FAIL,
+ opts->connected == SET_PASSWORD_ACTION_DISCONNECT);
} else {
- assert(protocol == DISPLAY_PROTOCOL_VNC);
- if (fail_if_connected || disconnect_if_connected) {
+ assert(opts->protocol == DISPLAY_PROTOCOL_VNC);
+ if (opts->connected != SET_PASSWORD_ACTION_KEEP) {
/* vnc supports "connected=keep" only */
error_setg(errp, QERR_INVALID_PARAMETER, "connected");
return;
}
/* Note that setting an empty password will not disable login through
* this interface. */
- rc = vnc_display_password(NULL, password);
+ rc = vnc_display_password(opts->u.vnc.display, opts->password);
}
if (rc != 0) {
@@ -204,11 +196,11 @@ void qmp_set_password(DisplayProtocol protocol, const char *password,
}
}
-void qmp_expire_password(DisplayProtocol protocol, const char *whenstr,
- Error **errp)
+void qmp_expire_password(ExpirePasswordOptions *opts, Error **errp)
{
time_t when;
int rc;
+ const char *whenstr = opts->time;
if (strcmp(whenstr, "now") == 0) {
when = 0;
@@ -220,14 +212,14 @@ void qmp_expire_password(DisplayProtocol protocol, const char *whenstr,
when = strtoull(whenstr, NULL, 10);
}
- if (protocol == DISPLAY_PROTOCOL_SPICE) {
+ if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
if (!qemu_using_spice(errp)) {
return;
}
rc = qemu_spice.set_pw_expire(when);
} else {
- assert(protocol == DISPLAY_PROTOCOL_VNC);
- rc = vnc_display_pw_expire(NULL, when);
+ assert(opts->protocol == DISPLAY_PROTOCOL_VNC);
+ rc = vnc_display_pw_expire(opts->u.vnc.display, when);
}
if (rc != 0) {
diff --git a/qapi/ui.json b/qapi/ui.json
index e112409211..4a13f883a3 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -38,20 +38,47 @@
'data': [ 'keep', 'fail', 'disconnect' ] }
##
-# @set_password:
+# @SetPasswordOptions:
#
-# Sets the password of a remote display session.
+# Options for set_password.
#
# @protocol: - 'vnc' to modify the VNC server password
# - 'spice' to modify the Spice server password
#
# @password: the new password
#
-# @connected: how to handle existing clients when changing the
-# password. If nothing is specified, defaults to 'keep'
-# 'fail' to fail the command if clients are connected
-# 'disconnect' to disconnect existing clients
-# 'keep' to maintain existing clients
+# @connected: How to handle existing clients when changing the
+# password. If nothing is specified, defaults to 'keep'.
+# For VNC, only 'keep' is currently implemented.
+#
+# Since: 7.0
+#
+##
+{ 'union': 'SetPasswordOptions',
+ 'base': { 'protocol': 'DisplayProtocol',
+ 'password': 'str',
+ '*connected': 'SetPasswordAction' },
+ 'discriminator': 'protocol',
+ 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
+
+##
+# @SetPasswordOptionsVnc:
+#
+# Options for set_password specific to the VNC procotol.
+#
+# @display: The id of the display where the password should be changed.
+# Defaults to the first.
+#
+# Since: 7.0
+#
+##
+{ 'struct': 'SetPasswordOptionsVnc',
+ 'data': { '*display': 'str' } }
+
+##
+# @set_password:
+#
+# Set the password of a remote display server.
#
# Returns: - Nothing on success
# - If Spice is not enabled, DeviceNotFound
@@ -65,17 +92,15 @@
# <- { "return": {} }
#
##
-{ 'command': 'set_password',
- 'data': { 'protocol': 'DisplayProtocol',
- 'password': 'str',
- '*connected': 'SetPasswordAction' } }
+{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
##
-# @expire_password:
+# @ExpirePasswordOptions:
#
-# Expire the password of a remote display server.
+# General options for expire_password.
#
-# @protocol: the name of the remote display protocol 'vnc' or 'spice'
+# @protocol: - 'vnc' to modify the VNC server expiration
+# - 'spice' to modify the Spice server expiration
#
# @time: when to expire the password.
#
@@ -84,16 +109,45 @@
# - '+INT' where INT is the number of seconds from now (integer)
# - 'INT' where INT is the absolute time in seconds
#
-# Returns: - Nothing on success
-# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
-#
-# Since: 0.14
-#
# Notes: Time is relative to the server and currently there is no way to
# coordinate server time with client time. It is not recommended to
# use the absolute time version of the @time parameter unless you're
# sure you are on the same machine as the QEMU instance.
#
+# Since: 7.0
+#
+##
+{ 'union': 'ExpirePasswordOptions',
+ 'base': { 'protocol': 'DisplayProtocol',
+ 'time': 'str' },
+ 'discriminator': 'protocol',
+ 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
+
+##
+# @ExpirePasswordOptionsVnc:
+#
+# Options for expire_password specific to the VNC procotol.
+#
+# @display: The id of the display where the expiration should be changed.
+# Defaults to the first.
+#
+# Since: 7.0
+#
+##
+
+{ 'struct': 'ExpirePasswordOptionsVnc',
+ 'data': { '*display': 'str' } }
+
+##
+# @expire_password:
+#
+# Expire the password of a remote display server.
+#
+# Returns: - Nothing on success
+# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
+#
+# Since: 0.14
+#
# Example:
#
# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
@@ -101,9 +155,7 @@
# <- { "return": {} }
#
##
-{ 'command': 'expire_password',
- 'data': { 'protocol': 'DisplayProtocol',
- 'time': 'str' } }
+{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
##
# @screendump:
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password
2022-02-25 8:49 ` [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password Fabian Ebner
@ 2022-02-25 11:34 ` Markus Armbruster
2022-02-25 12:23 ` Fabian Ebner
2022-03-01 11:29 ` Dr. David Alan Gilbert
1 sibling, 1 reply; 9+ messages in thread
From: Markus Armbruster @ 2022-02-25 11:34 UTC (permalink / raw)
To: Fabian Ebner
Cc: w.bumiller, berrange, qemu-devel, armbru, marcandre.lureau,
kraxel, pbonzini, marcandre.lureau, eblake, t.lamprecht, dgilbert
Fabian Ebner <f.ebner@proxmox.com> writes:
> From: Stefan Reiter <s.reiter@proxmox.com>
>
> It is possible to specify more than one VNC server on the command line,
> either with an explicit ID or the auto-generated ones à la "default",
> "vnc2", "vnc3", ...
>
> It is not possible to change the password on one of these extra VNC
> displays though. Fix this by adding a "display" parameter to the
> "set_password" and "expire_password" QMP and HMP commands.
>
> For HMP, the display is specified using the "-d" value flag.
>
> For QMP, the schema is updated to explicitly express the supported
> variants of the commands with protocol-discriminated unions.
>
> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
> [FE: update "Since: " from 6.2 to 7.0
> make @connected a common member of @SetPasswordOptions]
> Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
[...]
> diff --git a/qapi/ui.json b/qapi/ui.json
> index e112409211..4a13f883a3 100644
> --- a/qapi/ui.json
> +++ b/qapi/ui.json
> @@ -38,20 +38,47 @@
> 'data': [ 'keep', 'fail', 'disconnect' ] }
>
> ##
> -# @set_password:
> +# @SetPasswordOptions:
> #
> -# Sets the password of a remote display session.
> +# Options for set_password.
> #
> # @protocol: - 'vnc' to modify the VNC server password
> # - 'spice' to modify the Spice server password
> #
> # @password: the new password
> #
> -# @connected: how to handle existing clients when changing the
> -# password. If nothing is specified, defaults to 'keep'
> -# 'fail' to fail the command if clients are connected
> -# 'disconnect' to disconnect existing clients
> -# 'keep' to maintain existing clients
> +# @connected: How to handle existing clients when changing the
> +# password. If nothing is specified, defaults to 'keep'.
> +# For VNC, only 'keep' is currently implemented.
> +#
> +# Since: 7.0
> +#
> +##
> +{ 'union': 'SetPasswordOptions',
> + 'base': { 'protocol': 'DisplayProtocol',
> + 'password': 'str',
> + '*connected': 'SetPasswordAction' },
> + 'discriminator': 'protocol',
> + 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
> +
> +##
> +# @SetPasswordOptionsVnc:
> +#
> +# Options for set_password specific to the VNC procotol.
> +#
> +# @display: The id of the display where the password should be changed.
> +# Defaults to the first.
Is this default equivalent to any value? "The first" suggests it's not.
> +#
> +# Since: 7.0
> +#
> +##
> +{ 'struct': 'SetPasswordOptionsVnc',
> + 'data': { '*display': 'str' } }
> +
> +##
> +# @set_password:
> +#
> +# Set the password of a remote display server.
> #
> # Returns: - Nothing on success
> # - If Spice is not enabled, DeviceNotFound
> @@ -65,17 +92,15 @@
> # <- { "return": {} }
> #
> ##
> -{ 'command': 'set_password',
> - 'data': { 'protocol': 'DisplayProtocol',
> - 'password': 'str',
> - '*connected': 'SetPasswordAction' } }
> +{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
>
> ##
> -# @expire_password:
> +# @ExpirePasswordOptions:
> #
> -# Expire the password of a remote display server.
> +# General options for expire_password.
> #
> -# @protocol: the name of the remote display protocol 'vnc' or 'spice'
> +# @protocol: - 'vnc' to modify the VNC server expiration
> +# - 'spice' to modify the Spice server expiration
> #
> # @time: when to expire the password.
> #
> @@ -84,16 +109,45 @@
> # - '+INT' where INT is the number of seconds from now (integer)
> # - 'INT' where INT is the absolute time in seconds
> #
> -# Returns: - Nothing on success
> -# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
> -#
> -# Since: 0.14
> -#
> # Notes: Time is relative to the server and currently there is no way to
> # coordinate server time with client time. It is not recommended to
> # use the absolute time version of the @time parameter unless you're
> # sure you are on the same machine as the QEMU instance.
> #
> +# Since: 7.0
> +#
> +##
> +{ 'union': 'ExpirePasswordOptions',
> + 'base': { 'protocol': 'DisplayProtocol',
> + 'time': 'str' },
> + 'discriminator': 'protocol',
> + 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
> +
> +##
> +# @ExpirePasswordOptionsVnc:
> +#
> +# Options for expire_password specific to the VNC procotol.
> +#
> +# @display: The id of the display where the expiration should be changed.
> +# Defaults to the first.
> +#
> +# Since: 7.0
> +#
> +##
> +
> +{ 'struct': 'ExpirePasswordOptionsVnc',
> + 'data': { '*display': 'str' } }
> +
> +##
> +# @expire_password:
> +#
> +# Expire the password of a remote display server.
> +#
> +# Returns: - Nothing on success
> +# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
> +#
> +# Since: 0.14
> +#
> # Example:
> #
> # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
> @@ -101,9 +155,7 @@
> # <- { "return": {} }
> #
> ##
> -{ 'command': 'expire_password',
> - 'data': { 'protocol': 'DisplayProtocol',
> - 'time': 'str' } }
> +{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
>
> ##
> # @screendump:
QAPI schema
Acked-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password
2022-02-25 11:34 ` Markus Armbruster
@ 2022-02-25 12:23 ` Fabian Ebner
2022-02-25 12:44 ` Markus Armbruster
0 siblings, 1 reply; 9+ messages in thread
From: Fabian Ebner @ 2022-02-25 12:23 UTC (permalink / raw)
To: Markus Armbruster
Cc: w.bumiller, berrange, qemu-devel, dgilbert, marcandre.lureau,
kraxel, pbonzini, marcandre.lureau, eblake, t.lamprecht
Am 25.02.22 um 12:34 schrieb Markus Armbruster:
> Fabian Ebner <f.ebner@proxmox.com> writes:
>
>> From: Stefan Reiter <s.reiter@proxmox.com>
>>
>> It is possible to specify more than one VNC server on the command line,
>> either with an explicit ID or the auto-generated ones à la "default",
>> "vnc2", "vnc3", ...
>>
>> It is not possible to change the password on one of these extra VNC
>> displays though. Fix this by adding a "display" parameter to the
>> "set_password" and "expire_password" QMP and HMP commands.
>>
>> For HMP, the display is specified using the "-d" value flag.
>>
>> For QMP, the schema is updated to explicitly express the supported
>> variants of the commands with protocol-discriminated unions.
>>
>> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
>> [FE: update "Since: " from 6.2 to 7.0
>> make @connected a common member of @SetPasswordOptions]
>> Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
>
> [...]
>
>> diff --git a/qapi/ui.json b/qapi/ui.json
>> index e112409211..4a13f883a3 100644
>> --- a/qapi/ui.json
>> +++ b/qapi/ui.json
>> @@ -38,20 +38,47 @@
>> 'data': [ 'keep', 'fail', 'disconnect' ] }
>>
>> ##
>> -# @set_password:
>> +# @SetPasswordOptions:
>> #
>> -# Sets the password of a remote display session.
>> +# Options for set_password.
>> #
>> # @protocol: - 'vnc' to modify the VNC server password
>> # - 'spice' to modify the Spice server password
>> #
>> # @password: the new password
>> #
>> -# @connected: how to handle existing clients when changing the
>> -# password. If nothing is specified, defaults to 'keep'
>> -# 'fail' to fail the command if clients are connected
>> -# 'disconnect' to disconnect existing clients
>> -# 'keep' to maintain existing clients
>> +# @connected: How to handle existing clients when changing the
>> +# password. If nothing is specified, defaults to 'keep'.
>> +# For VNC, only 'keep' is currently implemented.
>> +#
>> +# Since: 7.0
>> +#
>> +##
>> +{ 'union': 'SetPasswordOptions',
>> + 'base': { 'protocol': 'DisplayProtocol',
>> + 'password': 'str',
>> + '*connected': 'SetPasswordAction' },
>> + 'discriminator': 'protocol',
>> + 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
>> +
>> +##
>> +# @SetPasswordOptionsVnc:
>> +#
>> +# Options for set_password specific to the VNC procotol.
>> +#
>> +# @display: The id of the display where the password should be changed.
>> +# Defaults to the first.
>
> Is this default equivalent to any value? "The first" suggests it's not.
>
The value will be NULL and QTAILQ_FIRST(&vnc_displays) is picked, which
means the display defaults to the first display. But yeah, the value
doesn't actually default to the id of the first display, it just behaves
as if it did.
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password
2022-02-25 12:23 ` Fabian Ebner
@ 2022-02-25 12:44 ` Markus Armbruster
0 siblings, 0 replies; 9+ messages in thread
From: Markus Armbruster @ 2022-02-25 12:44 UTC (permalink / raw)
To: Fabian Ebner
Cc: w.bumiller, berrange, qemu-devel, dgilbert, marcandre.lureau,
kraxel, pbonzini, marcandre.lureau, eblake, t.lamprecht
Fabian Ebner <f.ebner@proxmox.com> writes:
> Am 25.02.22 um 12:34 schrieb Markus Armbruster:
>> Fabian Ebner <f.ebner@proxmox.com> writes:
>>
>>> From: Stefan Reiter <s.reiter@proxmox.com>
>>>
>>> It is possible to specify more than one VNC server on the command line,
>>> either with an explicit ID or the auto-generated ones à la "default",
>>> "vnc2", "vnc3", ...
>>>
>>> It is not possible to change the password on one of these extra VNC
>>> displays though. Fix this by adding a "display" parameter to the
>>> "set_password" and "expire_password" QMP and HMP commands.
>>>
>>> For HMP, the display is specified using the "-d" value flag.
>>>
>>> For QMP, the schema is updated to explicitly express the supported
>>> variants of the commands with protocol-discriminated unions.
>>>
>>> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
>>> [FE: update "Since: " from 6.2 to 7.0
>>> make @connected a common member of @SetPasswordOptions]
>>> Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
>>
>> [...]
>>
>>> diff --git a/qapi/ui.json b/qapi/ui.json
>>> index e112409211..4a13f883a3 100644
>>> --- a/qapi/ui.json
>>> +++ b/qapi/ui.json
>>> @@ -38,20 +38,47 @@
>>> 'data': [ 'keep', 'fail', 'disconnect' ] }
>>>
>>> ##
>>> -# @set_password:
>>> +# @SetPasswordOptions:
>>> #
>>> -# Sets the password of a remote display session.
>>> +# Options for set_password.
>>> #
>>> # @protocol: - 'vnc' to modify the VNC server password
>>> # - 'spice' to modify the Spice server password
>>> #
>>> # @password: the new password
>>> #
>>> -# @connected: how to handle existing clients when changing the
>>> -# password. If nothing is specified, defaults to 'keep'
>>> -# 'fail' to fail the command if clients are connected
>>> -# 'disconnect' to disconnect existing clients
>>> -# 'keep' to maintain existing clients
>>> +# @connected: How to handle existing clients when changing the
>>> +# password. If nothing is specified, defaults to 'keep'.
>>> +# For VNC, only 'keep' is currently implemented.
>>> +#
>>> +# Since: 7.0
>>> +#
>>> +##
>>> +{ 'union': 'SetPasswordOptions',
>>> + 'base': { 'protocol': 'DisplayProtocol',
>>> + 'password': 'str',
>>> + '*connected': 'SetPasswordAction' },
>>> + 'discriminator': 'protocol',
>>> + 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
>>> +
>>> +##
>>> +# @SetPasswordOptionsVnc:
>>> +#
>>> +# Options for set_password specific to the VNC procotol.
>>> +#
>>> +# @display: The id of the display where the password should be changed.
>>> +# Defaults to the first.
>>
>> Is this default equivalent to any value? "The first" suggests it's not.
>>
>
> The value will be NULL and QTAILQ_FIRST(&vnc_displays) is picked, which
> means the display defaults to the first display. But yeah, the value
> doesn't actually default to the id of the first display, it just behaves
> as if it did.
QAPI lets you give "absent" a meaning different from any value (because
it lets you distinguish "absent" from any value). I prefer not to make
use of it. But it's not wrong. My Acked-by stands.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password
2022-02-25 8:49 ` [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password Fabian Ebner
2022-02-25 11:34 ` Markus Armbruster
@ 2022-03-01 11:29 ` Dr. David Alan Gilbert
1 sibling, 0 replies; 9+ messages in thread
From: Dr. David Alan Gilbert @ 2022-03-01 11:29 UTC (permalink / raw)
To: Fabian Ebner
Cc: w.bumiller, berrange, qemu-devel, armbru, marcandre.lureau,
kraxel, pbonzini, marcandre.lureau, eblake, t.lamprecht
* Fabian Ebner (f.ebner@proxmox.com) wrote:
> From: Stefan Reiter <s.reiter@proxmox.com>
>
> It is possible to specify more than one VNC server on the command line,
> either with an explicit ID or the auto-generated ones à la "default",
> "vnc2", "vnc3", ...
>
> It is not possible to change the password on one of these extra VNC
> displays though. Fix this by adding a "display" parameter to the
> "set_password" and "expire_password" QMP and HMP commands.
>
> For HMP, the display is specified using the "-d" value flag.
>
> For QMP, the schema is updated to explicitly express the supported
> variants of the commands with protocol-discriminated unions.
>
> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
> [FE: update "Since: " from 6.2 to 7.0
> make @connected a common member of @SetPasswordOptions]
> Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
>
> v8 -> v9:
> * Make @connected a common member of @SetPasswordOptions.
> * Use s rather than V to indicate that the flag takes a string value.
>
> hmp-commands.hx | 24 ++++++------
> monitor/hmp-cmds.c | 40 +++++++++++++------
> monitor/qmp-cmds.c | 34 +++++++---------
> qapi/ui.json | 96 +++++++++++++++++++++++++++++++++++-----------
> 4 files changed, 129 insertions(+), 65 deletions(-)
>
> diff --git a/hmp-commands.hx b/hmp-commands.hx
> index 70a9136ac2..8476277aa9 100644
> --- a/hmp-commands.hx
> +++ b/hmp-commands.hx
> @@ -1514,33 +1514,35 @@ ERST
>
> {
> .name = "set_password",
> - .args_type = "protocol:s,password:s,connected:s?",
> - .params = "protocol password action-if-connected",
> + .args_type = "protocol:s,password:s,display:-ds,connected:s?",
> + .params = "protocol password [-d display] [action-if-connected]",
> .help = "set spice/vnc password",
> .cmd = hmp_set_password,
> },
>
> SRST
> -``set_password [ vnc | spice ] password [ action-if-connected ]``
> - Change spice/vnc password. *action-if-connected* specifies what
> - should happen in case a connection is established: *fail* makes the
> - password change fail. *disconnect* changes the password and
> +``set_password [ vnc | spice ] password [ -d display ] [ action-if-connected ]``
> + Change spice/vnc password. *display* can be used with 'vnc' to specify
> + which display to set the password on. *action-if-connected* specifies
> + what should happen in case a connection is established: *fail* makes
> + the password change fail. *disconnect* changes the password and
> disconnects the client. *keep* changes the password and keeps the
> connection up. *keep* is the default.
> ERST
>
> {
> .name = "expire_password",
> - .args_type = "protocol:s,time:s",
> - .params = "protocol time",
> + .args_type = "protocol:s,time:s,display:-ds",
> + .params = "protocol time [-d display]",
> .help = "set spice/vnc password expire-time",
> .cmd = hmp_expire_password,
> },
>
> SRST
> -``expire_password [ vnc | spice ]`` *expire-time*
> - Specify when a password for spice/vnc becomes
> - invalid. *expire-time* accepts:
> +``expire_password [ vnc | spice ] expire-time [ -d display ]``
> + Specify when a password for spice/vnc becomes invalid.
> + *display* behaves the same as in ``set_password``.
> + *expire-time* accepts:
>
> ``now``
> Invalidate password instantly.
> diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
> index ff78741b75..634968498b 100644
> --- a/monitor/hmp-cmds.c
> +++ b/monitor/hmp-cmds.c
> @@ -1396,24 +1396,33 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
> {
> const char *protocol = qdict_get_str(qdict, "protocol");
> const char *password = qdict_get_str(qdict, "password");
> + const char *display = qdict_get_try_str(qdict, "display");
> const char *connected = qdict_get_try_str(qdict, "connected");
> Error *err = NULL;
> - DisplayProtocol proto;
> - SetPasswordAction conn;
>
> - proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
> - DISPLAY_PROTOCOL_VNC, &err);
> + SetPasswordOptions opts = {
> + .password = (char *)password,
> + .has_connected = !!connected,
> + };
> +
> + opts.connected = qapi_enum_parse(&SetPasswordAction_lookup, connected,
> + SET_PASSWORD_ACTION_KEEP, &err);
> if (err) {
> goto out;
> }
>
> - conn = qapi_enum_parse(&SetPasswordAction_lookup, connected,
> - SET_PASSWORD_ACTION_KEEP, &err);
> + opts.protocol = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
> + DISPLAY_PROTOCOL_VNC, &err);
> if (err) {
> goto out;
> }
>
> - qmp_set_password(proto, password, !!connected, conn, &err);
> + if (opts.protocol == DISPLAY_PROTOCOL_VNC) {
> + opts.u.vnc.has_display = !!display;
> + opts.u.vnc.display = (char *)display;
> + }
> +
> + qmp_set_password(&opts, &err);
>
> out:
> hmp_handle_error(mon, err);
> @@ -1423,16 +1432,25 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
> {
> const char *protocol = qdict_get_str(qdict, "protocol");
> const char *whenstr = qdict_get_str(qdict, "time");
> + const char *display = qdict_get_try_str(qdict, "display");
> Error *err = NULL;
> - DisplayProtocol proto;
>
> - proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
> - DISPLAY_PROTOCOL_VNC, &err);
> + ExpirePasswordOptions opts = {
> + .time = (char *)whenstr,
> + };
> +
> + opts.protocol = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
> + DISPLAY_PROTOCOL_VNC, &err);
> if (err) {
> goto out;
> }
>
> - qmp_expire_password(proto, whenstr, &err);
> + if (opts.protocol == DISPLAY_PROTOCOL_VNC) {
> + opts.u.vnc.has_display = !!display;
> + opts.u.vnc.display = (char *)display;
> + }
> +
> + qmp_expire_password(&opts, &err);
>
> out:
> hmp_handle_error(mon, err);
> diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
> index b6e8b57fcc..df97582dd4 100644
> --- a/monitor/qmp-cmds.c
> +++ b/monitor/qmp-cmds.c
> @@ -168,35 +168,27 @@ void qmp_system_wakeup(Error **errp)
> qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
> }
>
> -void qmp_set_password(DisplayProtocol protocol, const char *password,
> - bool has_connected, SetPasswordAction connected,
> - Error **errp)
> +void qmp_set_password(SetPasswordOptions *opts, Error **errp)
> {
> - int disconnect_if_connected = 0;
> - int fail_if_connected = 0;
> int rc;
>
> - if (has_connected) {
> - fail_if_connected = connected == SET_PASSWORD_ACTION_FAIL;
> - disconnect_if_connected = connected == SET_PASSWORD_ACTION_DISCONNECT;
> - }
> -
> - if (protocol == DISPLAY_PROTOCOL_SPICE) {
> + if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
> if (!qemu_using_spice(errp)) {
> return;
> }
> - rc = qemu_spice.set_passwd(password, fail_if_connected,
> - disconnect_if_connected);
> + rc = qemu_spice.set_passwd(opts->password,
> + opts->connected == SET_PASSWORD_ACTION_FAIL,
> + opts->connected == SET_PASSWORD_ACTION_DISCONNECT);
> } else {
> - assert(protocol == DISPLAY_PROTOCOL_VNC);
> - if (fail_if_connected || disconnect_if_connected) {
> + assert(opts->protocol == DISPLAY_PROTOCOL_VNC);
> + if (opts->connected != SET_PASSWORD_ACTION_KEEP) {
> /* vnc supports "connected=keep" only */
> error_setg(errp, QERR_INVALID_PARAMETER, "connected");
> return;
> }
> /* Note that setting an empty password will not disable login through
> * this interface. */
> - rc = vnc_display_password(NULL, password);
> + rc = vnc_display_password(opts->u.vnc.display, opts->password);
> }
>
> if (rc != 0) {
> @@ -204,11 +196,11 @@ void qmp_set_password(DisplayProtocol protocol, const char *password,
> }
> }
>
> -void qmp_expire_password(DisplayProtocol protocol, const char *whenstr,
> - Error **errp)
> +void qmp_expire_password(ExpirePasswordOptions *opts, Error **errp)
> {
> time_t when;
> int rc;
> + const char *whenstr = opts->time;
>
> if (strcmp(whenstr, "now") == 0) {
> when = 0;
> @@ -220,14 +212,14 @@ void qmp_expire_password(DisplayProtocol protocol, const char *whenstr,
> when = strtoull(whenstr, NULL, 10);
> }
>
> - if (protocol == DISPLAY_PROTOCOL_SPICE) {
> + if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
> if (!qemu_using_spice(errp)) {
> return;
> }
> rc = qemu_spice.set_pw_expire(when);
> } else {
> - assert(protocol == DISPLAY_PROTOCOL_VNC);
> - rc = vnc_display_pw_expire(NULL, when);
> + assert(opts->protocol == DISPLAY_PROTOCOL_VNC);
> + rc = vnc_display_pw_expire(opts->u.vnc.display, when);
> }
>
> if (rc != 0) {
> diff --git a/qapi/ui.json b/qapi/ui.json
> index e112409211..4a13f883a3 100644
> --- a/qapi/ui.json
> +++ b/qapi/ui.json
> @@ -38,20 +38,47 @@
> 'data': [ 'keep', 'fail', 'disconnect' ] }
>
> ##
> -# @set_password:
> +# @SetPasswordOptions:
> #
> -# Sets the password of a remote display session.
> +# Options for set_password.
> #
> # @protocol: - 'vnc' to modify the VNC server password
> # - 'spice' to modify the Spice server password
> #
> # @password: the new password
> #
> -# @connected: how to handle existing clients when changing the
> -# password. If nothing is specified, defaults to 'keep'
> -# 'fail' to fail the command if clients are connected
> -# 'disconnect' to disconnect existing clients
> -# 'keep' to maintain existing clients
> +# @connected: How to handle existing clients when changing the
> +# password. If nothing is specified, defaults to 'keep'.
> +# For VNC, only 'keep' is currently implemented.
> +#
> +# Since: 7.0
> +#
> +##
> +{ 'union': 'SetPasswordOptions',
> + 'base': { 'protocol': 'DisplayProtocol',
> + 'password': 'str',
> + '*connected': 'SetPasswordAction' },
> + 'discriminator': 'protocol',
> + 'data': { 'vnc': 'SetPasswordOptionsVnc' } }
> +
> +##
> +# @SetPasswordOptionsVnc:
> +#
> +# Options for set_password specific to the VNC procotol.
> +#
> +# @display: The id of the display where the password should be changed.
> +# Defaults to the first.
> +#
> +# Since: 7.0
> +#
> +##
> +{ 'struct': 'SetPasswordOptionsVnc',
> + 'data': { '*display': 'str' } }
> +
> +##
> +# @set_password:
> +#
> +# Set the password of a remote display server.
> #
> # Returns: - Nothing on success
> # - If Spice is not enabled, DeviceNotFound
> @@ -65,17 +92,15 @@
> # <- { "return": {} }
> #
> ##
> -{ 'command': 'set_password',
> - 'data': { 'protocol': 'DisplayProtocol',
> - 'password': 'str',
> - '*connected': 'SetPasswordAction' } }
> +{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
>
> ##
> -# @expire_password:
> +# @ExpirePasswordOptions:
> #
> -# Expire the password of a remote display server.
> +# General options for expire_password.
> #
> -# @protocol: the name of the remote display protocol 'vnc' or 'spice'
> +# @protocol: - 'vnc' to modify the VNC server expiration
> +# - 'spice' to modify the Spice server expiration
> #
> # @time: when to expire the password.
> #
> @@ -84,16 +109,45 @@
> # - '+INT' where INT is the number of seconds from now (integer)
> # - 'INT' where INT is the absolute time in seconds
> #
> -# Returns: - Nothing on success
> -# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
> -#
> -# Since: 0.14
> -#
> # Notes: Time is relative to the server and currently there is no way to
> # coordinate server time with client time. It is not recommended to
> # use the absolute time version of the @time parameter unless you're
> # sure you are on the same machine as the QEMU instance.
> #
> +# Since: 7.0
> +#
> +##
> +{ 'union': 'ExpirePasswordOptions',
> + 'base': { 'protocol': 'DisplayProtocol',
> + 'time': 'str' },
> + 'discriminator': 'protocol',
> + 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
> +
> +##
> +# @ExpirePasswordOptionsVnc:
> +#
> +# Options for expire_password specific to the VNC procotol.
> +#
> +# @display: The id of the display where the expiration should be changed.
> +# Defaults to the first.
> +#
> +# Since: 7.0
> +#
> +##
> +
> +{ 'struct': 'ExpirePasswordOptionsVnc',
> + 'data': { '*display': 'str' } }
> +
> +##
> +# @expire_password:
> +#
> +# Expire the password of a remote display server.
> +#
> +# Returns: - Nothing on success
> +# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
> +#
> +# Since: 0.14
> +#
> # Example:
> #
> # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
> @@ -101,9 +155,7 @@
> # <- { "return": {} }
> #
> ##
> -{ 'command': 'expire_password',
> - 'data': { 'protocol': 'DisplayProtocol',
> - 'time': 'str' } }
> +{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
>
> ##
> # @screendump:
> --
> 2.30.2
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v9 0/3] VNC-related HMP/QMP fixes
2022-02-25 8:49 [PATCH v9 0/3] VNC-related HMP/QMP fixes Fabian Ebner
` (2 preceding siblings ...)
2022-02-25 8:49 ` [PATCH v9 3/3] qapi/monitor: allow VNC display id in set/expire_password Fabian Ebner
@ 2022-03-02 11:26 ` Dr. David Alan Gilbert
3 siblings, 0 replies; 9+ messages in thread
From: Dr. David Alan Gilbert @ 2022-03-02 11:26 UTC (permalink / raw)
To: Fabian Ebner
Cc: w.bumiller, berrange, qemu-devel, armbru, marcandre.lureau,
kraxel, pbonzini, marcandre.lureau, eblake, t.lamprecht
* Fabian Ebner (f.ebner@proxmox.com) wrote:
> Original cover letter by Stefan R.:
>
> Since the removal of the generic 'qmp_change' command, one can no
> longer replace the 'default' VNC display listen address at runtime
> (AFAIK). For our users who need to set up a secondary VNC access port,
> this means configuring a second VNC display (in addition to our
> standard one for web-access), but it turns out one cannot set a
> password on this second display at the moment, as the 'set_password'
> call only operates on the 'default' display.
>
> Additionally, using secret objects, the password is only read once at
> startup. This could be considered a bug too, but is not touched in
> this series and left for a later date.
Queued
> v8 -> v9:
> * use s instead of V to indicate when a flag takes a string parameter
> * make @connected a common member of @SetPasswordOptions
>
> v7 -> v8:
> * drop last patch deprecating SetPasswordAction values besides 'keep'
> for VNC (unfortunately, I don't have enough time to try implementing
> 'disconnect' and 'fail' for VNC in the near future)
> * drop if conditionals for DisplayProtocol enum to make compilation
> with --disable-spice and/or --disable-vnc work
> * order 'keep' first in enum, to fix how patch #3 uses it as an
> implicit default
> * also set connected and has_connected for the VNC options in
> hmp_set_password
> * fix typo in patch #1
> * add missing '#' for description in patch #3
>
> v6 -> v7:
> * remove g_strdup and g_free, use strings directly
> * squash in last patch
>
> v5 -> v6:
> * consider feedback from Markus' review, mainly:
> * fix crash bug in patch 1 (sorry, artifact of patch-splitting)
> * rely on '!has_param => param == NULL' to shorten code
> * add note to 'docs/about/deprecated.rst' and touch up comments a bit
> * go back to g_free instead of qapi_free_* since the latter apparently tries to
> free the passed in pointer which lives on the stack...
> * fix bug in HMP parsing (see patch 1)
>
> v4 -> v5:
> * add comment to patch 1 in "monitor-internal.h"
> * use qapi_free_SetPasswordOptions and friends, don't leak strdups
> * split QAPI change into 3 seperate patches
>
> v3 -> v4:
> * drop previously patch 1, this was fixed here instead:
> https://lists.gnu.org/archive/html/qemu-devel/2021-09/msg02529.html
> * patch 1: add Eric's R-b
> * patch 2: remove if-assignment, use 'deprecated' feature in schema
>
> v2 -> v3:
> * refactor QMP schema for set/expire_password as suggested by Eric Blake and
> Markus Armbruster
>
> v1 -> v2:
> * add Marc-André's R-b on patch 1
> * use '-d' flag as suggested by Eric Blake and Gerd Hoffmann
> * I didn't see a way to do this yet, so I added a "flags with values" arg type
>
> Stefan Reiter (3):
> monitor/hmp: add support for flag argument with value
> qapi/monitor: refactor set/expire_password with enums
> qapi/monitor: allow VNC display id in set/expire_password
>
> hmp-commands.hx | 24 ++++----
> monitor/hmp-cmds.c | 47 ++++++++++++++-
> monitor/hmp.c | 19 +++++-
> monitor/monitor-internal.h | 3 +-
> monitor/qmp-cmds.c | 49 +++++----------
> qapi/ui.json | 120 +++++++++++++++++++++++++++++++------
> 6 files changed, 194 insertions(+), 68 deletions(-)
>
> --
> 2.30.2
>
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 9+ messages in thread