qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Juan Quintela <quintela@redhat.com>
Cc: qemu-devel@nongnu.org, "Leonardo Bras" <leobras@redhat.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"Eduardo Habkost" <eduardo@habkost.net>,
	"Yanan Wang" <wangyanan55@huawei.com>
Subject: Re: [PATCH 5/5] multifd: Only sync once each full round of memory
Date: Tue, 5 Jul 2022 14:56:35 +0100	[thread overview]
Message-ID: <YsRDEyA0mjUD4DSB@work-vm> (raw)
In-Reply-To: <20220621140507.1246-6-quintela@redhat.com>

* Juan Quintela (quintela@redhat.com) wrote:
> We need to add a new flag to mean to sync at that point.
> Notice that we still synchronize at the end of setup and at the end of
> complete stages.
> 
> Signed-off-by: Juan Quintela <quintela@redhat.com>
> ---
>  migration/migration.c |  2 +-
>  migration/ram.c       | 42 ++++++++++++++++++++++++++++++------------
>  2 files changed, 31 insertions(+), 13 deletions(-)
> 
> diff --git a/migration/migration.c b/migration/migration.c
> index 3f79df0b70..6627787fc2 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -4283,7 +4283,7 @@ static Property migration_properties[] = {
>                        DEFAULT_MIGRATE_ANNOUNCE_STEP),
>      /* We will change to false when we introduce the new mechanism */
>      DEFINE_PROP_BOOL("multifd-sync-each-iteration", MigrationState,
> -                      multifd_sync_each_iteration, true),
> +                      multifd_sync_each_iteration, false),
>  
>      /* Migration capabilities */
>      DEFINE_PROP_MIG_CAP("x-xbzrle", MIGRATION_CAPABILITY_XBZRLE),
> diff --git a/migration/ram.c b/migration/ram.c
> index 2c7289edad..6792986565 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -81,6 +81,7 @@
>  #define RAM_SAVE_FLAG_XBZRLE   0x40
>  /* 0x80 is reserved in migration.h start with 0x100 next */
>  #define RAM_SAVE_FLAG_COMPRESS_PAGE    0x100
> +#define RAM_SAVE_FLAG_MULTIFD_SYNC     0x200

Note this is the very last usable flag!
We could do with avoiding using them as flags where we dont need to.

>  XBZRLECacheStats xbzrle_counters;
>  
> @@ -1482,6 +1483,7 @@ retry:
>   * associated with the search process.
>   *
>   * Returns:
> + *        <0: An error happened
>   *         0: no page found, give up
>   *         1: no page found, retry
>   *         2: page found
> @@ -1510,6 +1512,13 @@ static int find_dirty_block(RAMState *rs, PageSearchStatus *pss)
>          pss->page = 0;
>          pss->block = QLIST_NEXT_RCU(pss->block, next);
>          if (!pss->block) {
> +            if (!migrate_multifd_sync_each_iteration()) {
> +                int ret = multifd_send_sync_main(rs->f);
> +                if (ret < 0) {
> +                    return ret;
> +                }
> +                qemu_put_be64(rs->f, RAM_SAVE_FLAG_MULTIFD_SYNC);
> +            }
>              /*
>               * If memory migration starts over, we will meet a dirtied page
>               * which may still exists in compression threads's ring, so we
> @@ -2273,7 +2282,8 @@ static int ram_find_and_save_block(RAMState *rs)
>          if (!get_queued_page(rs, &pss)) {
>              /* priority queue empty, so just search for something dirty */
>              int res = find_dirty_block(rs, &pss);
> -            if (res == 0) {
> +            if (res <= 0) {
> +                pages = res;
>                  break;
>              } else if (res == 1)
>                  continue;
> @@ -2943,11 +2953,13 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
>      ram_control_before_iterate(f, RAM_CONTROL_SETUP);
>      ram_control_after_iterate(f, RAM_CONTROL_SETUP);
>  
> -    if (migrate_multifd_sync_each_iteration()) {
> -        ret =  multifd_send_sync_main(f);
> -        if (ret < 0) {
> -            return ret;
> -        }
> +    ret =  multifd_send_sync_main(f);
> +    if (ret < 0) {
> +        return ret;
> +    }
> +
> +    if (!migrate_multifd_sync_each_iteration()) {
> +        qemu_put_be64(f, RAM_SAVE_FLAG_MULTIFD_SYNC);
>      }
>      qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
>      qemu_fflush(f);
> @@ -3127,13 +3139,14 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
>          return ret;
>      }
>  
> -    if (migrate_multifd_sync_each_iteration()) {
> -        ret = multifd_send_sync_main(rs->f);
> -        if (ret < 0) {
> -            return ret;
> -        }

It feels like you could have done that in the previous patch.
Anyway,


Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

> +    ret = multifd_send_sync_main(rs->f);
> +    if (ret < 0) {
> +        return ret;
>      }
>  
> +    if (migrate_multifd_sync_each_iteration()) {
> +        qemu_put_be64(f, RAM_SAVE_FLAG_MULTIFD_SYNC);
> +    }
>      qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
>      qemu_fflush(f);
>  
> @@ -3800,7 +3813,9 @@ int ram_load_postcopy(QEMUFile *f)
>              }
>              decompress_data_with_multi_threads(f, page_buffer, len);
>              break;
> -
> +        case RAM_SAVE_FLAG_MULTIFD_SYNC:
> +            multifd_recv_sync_main();
> +            break;
>          case RAM_SAVE_FLAG_EOS:
>              /* normal exit */
>              if (migrate_multifd_sync_each_iteration()) {
> @@ -4079,6 +4094,9 @@ static int ram_load_precopy(QEMUFile *f)
>                  break;
>              }
>              break;
> +        case RAM_SAVE_FLAG_MULTIFD_SYNC:
> +            multifd_recv_sync_main();
> +            break;
>          case RAM_SAVE_FLAG_EOS:
>              /* normal exit */
>              if (migrate_multifd_sync_each_iteration()) {
> -- 
> 2.34.1
> 
-- 
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK



  parent reply	other threads:[~2022-07-05 13:57 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-21 14:05 [PATCH 0/5] Eliminate multifd flush Juan Quintela
2022-06-21 14:05 ` [PATCH 1/5] multifd: Create property multifd-sync-each-iteration Juan Quintela
2022-06-30 14:34   ` Dr. David Alan Gilbert
2022-07-04 16:07     ` Juan Quintela
2022-07-05 12:19   ` Dr. David Alan Gilbert
2022-06-21 14:05 ` [PATCH 2/5] multifd: Put around all sync calls tests for each iteration Juan Quintela
2022-07-05 12:20   ` Dr. David Alan Gilbert
2022-06-21 14:05 ` [PATCH 3/5] migration: Simplify ram_find_and_save_block() Juan Quintela
2022-07-05 12:51   ` Dr. David Alan Gilbert
2022-06-21 14:05 ` [PATCH 4/5] migration: Make find_dirty_block() return a single parameter Juan Quintela
2022-07-05 12:54   ` Dr. David Alan Gilbert
2022-07-26 16:23     ` Juan Quintela
2022-07-28  9:07       ` Dr. David Alan Gilbert
2022-06-21 14:05 ` [PATCH 5/5] multifd: Only sync once each full round of memory Juan Quintela
2022-07-01  2:29   ` Leonardo Brás
2022-07-04 16:18     ` Juan Quintela
2022-07-05 13:56   ` Dr. David Alan Gilbert [this message]
2022-07-05 14:34     ` Daniel P. Berrangé
2022-07-05 15:13       ` Juan Quintela
2022-07-05 15:11     ` Juan Quintela
2022-07-05 16:52       ` Daniel P. Berrangé
2022-07-05 17:13         ` Dr. David Alan Gilbert
2022-07-05 17:16           ` Daniel P. Berrangé
2022-07-05 17:20             ` Dr. David Alan Gilbert
2022-07-28  8:25               ` Juan Quintela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YsRDEyA0mjUD4DSB@work-vm \
    --to=dgilbert@redhat.com \
    --cc=eduardo@habkost.net \
    --cc=f4bug@amsat.org \
    --cc=leobras@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=wangyanan55@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).