qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Corey Minyard <corey@minyard.net>
To: Nicholas Piggin <npiggin@gmail.com>
Cc: Corey Minyard <minyard@acm.org>, qemu-devel@nongnu.org
Subject: Re: [PATCH v2 4/5] ipmi/bmc-sim: implement watchdog dont log flag
Date: Tue, 1 Apr 2025 08:05:11 -0500	[thread overview]
Message-ID: <Z-vkh-c-TwvLQM0O@mail.minyard.net> (raw)
In-Reply-To: <20250401114412.676636-5-npiggin@gmail.com>

On Tue, Apr 01, 2025 at 09:44:11PM +1000, Nicholas Piggin wrote:
> If the dont-log flag is set in the 'timer use' field for the
> 'set watchdog' command, a watchdog timeout will not get logged as
> a timer use expiration.
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>  hw/ipmi/ipmi_bmc_sim.c | 32 ++++++++++++++++++++++----------
>  1 file changed, 22 insertions(+), 10 deletions(-)
> 
> diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
> index 216bf8ff7f0..3cefc69f8a8 100644
> --- a/hw/ipmi/ipmi_bmc_sim.c
> +++ b/hw/ipmi/ipmi_bmc_sim.c
> @@ -514,7 +514,8 @@ static void gen_event(IPMIBmcSim *ibs, unsigned int sens_num, uint8_t deassert,
>  
>  static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
>                                      unsigned int bit, unsigned int val,
> -                                    uint8_t evd1, uint8_t evd2, uint8_t evd3)
> +                                    uint8_t evd1, uint8_t evd2, uint8_t evd3,
> +                                    bool do_log)
>  {
>      IPMISensor *sens;
>      uint16_t mask;
> @@ -534,7 +535,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
>              return; /* Already asserted */
>          }
>          sens->assert_states |= mask & sens->assert_suppt;
> -        if (sens->assert_enable & mask & sens->assert_states) {
> +        if (do_log && (sens->assert_enable & mask & sens->assert_states)) {
>              /* Send an event on assert */
>              gen_event(ibs, sensor, 0, evd1, evd2, evd3);
>          }
> @@ -544,7 +545,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
>              return; /* Already deasserted */
>          }
>          sens->deassert_states |= mask & sens->deassert_suppt;
> -        if (sens->deassert_enable & mask & sens->deassert_states) {
> +        if (do_log && (sens->deassert_enable & mask & sens->deassert_states)) {
>              /* Send an event on deassert */
>              gen_event(ibs, sensor, 1, evd1, evd2, evd3);
>          }
> @@ -700,6 +701,7 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
>  {
>      IPMIInterface *s = ibs->parent.intf;
>      IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
> +    bool do_log = !IPMI_BMC_WATCHDOG_GET_DONT_LOG(ibs);
>  
>      if (!ibs->watchdog_running) {
>          goto out;
> @@ -711,14 +713,16 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
>              ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
>              k->do_hw_op(s, IPMI_SEND_NMI, 0);
>              sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
> -                                    0xc8, (2 << 4) | 0xf, 0xff);
> +                                    0xc8, (2 << 4) | 0xf, 0xff,
> +                                    do_log);
>              break;
>  
>          case IPMI_BMC_WATCHDOG_PRE_MSG_INT:
>              ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
>              k->set_atn(s, 1, attn_irq_enabled(ibs));
>              sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
> -                                    0xc8, (3 << 4) | 0xf, 0xff);
> +                                    0xc8, (3 << 4) | 0xf, 0xff,
> +                                    do_log);
>              break;
>  
>          default:
> @@ -734,28 +738,36 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
>  
>   do_full_expiry:
>      ibs->watchdog_running = 0; /* Stop the watchdog on a timeout */
> -    ibs->watchdog_expired |= (1 << IPMI_BMC_WATCHDOG_GET_USE(ibs));
> +
> +    if (do_log) {
> +        ibs->watchdog_expired |= (1 << IPMI_BMC_WATCHDOG_GET_USE(ibs));
> +    }
> +

This change needs to be removed.  watchdog_expired has nothing to do
with logs, it's a field reporting in another message.

Other than that, this is good.

-corey

>      switch (IPMI_BMC_WATCHDOG_GET_ACTION(ibs)) {
>      case IPMI_BMC_WATCHDOG_ACTION_NONE:
>          sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 0, 1,
> -                                0xc0, ibs->watchdog_use & 0xf, 0xff);
> +                                0xc0, ibs->watchdog_use & 0xf, 0xff,
> +                                do_log);
>          break;
>  
>      case IPMI_BMC_WATCHDOG_ACTION_RESET:
>          sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 1, 1,
> -                                0xc1, ibs->watchdog_use & 0xf, 0xff);
> +                                0xc1, ibs->watchdog_use & 0xf, 0xff,
> +                                do_log);
>          k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
>          break;
>  
>      case IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN:
>          sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
> -                                0xc2, ibs->watchdog_use & 0xf, 0xff);
> +                                0xc2, ibs->watchdog_use & 0xf, 0xff,
> +                                do_log);
>          k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
>          break;
>  
>      case IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE:
>          sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
> -                                0xc3, ibs->watchdog_use & 0xf, 0xff);
> +                                0xc3, ibs->watchdog_use & 0xf, 0xff,
> +                                do_log);
>          k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 0);
>          break;
>      }
> -- 
> 2.47.1
> 


  reply	other threads:[~2025-04-01 13:06 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-01 11:44 [PATCH v2 0/5] ipmi: bmc-sim improvements Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 1/5] ipmi/pci-ipmi-bt: Rename copy-paste variables Nicholas Piggin
2025-04-01 11:49   ` Philippe Mathieu-Daudé
2025-04-01 11:44 ` [PATCH v2 2/5] ipmi: add fwinfo to pci ipmi devices Nicholas Piggin
2025-04-01 11:57   ` Philippe Mathieu-Daudé
2025-04-01 13:27     ` Nicholas Piggin
2025-04-01 14:55       ` Philippe Mathieu-Daudé
2025-04-01 13:09   ` Corey Minyard
2025-04-01 13:29     ` Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 3/5] ipmi/bmc-sim: Add 'Get Channel Info' command Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 4/5] ipmi/bmc-sim: implement watchdog dont log flag Nicholas Piggin
2025-04-01 13:05   ` Corey Minyard [this message]
2025-04-01 13:28     ` Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 5/5] ipmi/bmc-sim: add error handling for 'Set BMC Global Enables' command Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z-vkh-c-TwvLQM0O@mail.minyard.net \
    --to=corey@minyard.net \
    --cc=minyard@acm.org \
    --cc=npiggin@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).