From: "Dr. David Alan Gilbert" <dave@treblig.org>
To: Fabiano Rosas <farosas@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>,
Peter Xu <peterx@redhat.com>,
eblake@redhat.com, qemu-devel@nongnu.org
Subject: Re: [PATCH 2/3] migration: Remove unused zero-blocks capability
Date: Thu, 19 Sep 2024 13:00:34 +0000 [thread overview]
Message-ID: <ZuwgcgLfOHkOMqHT@gallifrey> (raw)
In-Reply-To: <87tteber7o.fsf@suse.de>
* Fabiano Rosas (farosas@suse.de) wrote:
> Markus Armbruster <armbru@redhat.com> writes:
>
> > Peter Xu <peterx@redhat.com> writes:
> >
> >> On Wed, Sep 18, 2024 at 07:52:56AM +0200, Markus Armbruster wrote:
> >>> dave@treblig.org writes:
> >>>
> >>> > From: "Dr. David Alan Gilbert" <dave@treblig.org>
> >>> >
> >>> > migrate_zero_blocks is unused since
> >>> > eef0bae3a7 ("migration: Remove block migration")
> >>> >
> >>> > Remove it.
> >>> > That whole zero-blocks capability was just for old-school
> >>> > block migration anyway.
> >>> >
> >>> > Remove the capability as well.
> >>> >
> >>> > Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
> >>> > ---
> >>> > migration/options.c | 8 --------
> >>> > migration/options.h | 1 -
> >>> > qapi/migration.json | 10 +---------
> >>> > 3 files changed, 1 insertion(+), 18 deletions(-)
> >>> >
> >>> > diff --git a/migration/options.c b/migration/options.c
> >>> > index 9460c5dee9..997e060612 100644
> >>> > --- a/migration/options.c
> >>> > +++ b/migration/options.c
> >>> > @@ -177,7 +177,6 @@ Property migration_properties[] = {
> >>> > DEFINE_PROP_MIG_CAP("x-xbzrle", MIGRATION_CAPABILITY_XBZRLE),
> >>> > DEFINE_PROP_MIG_CAP("x-rdma-pin-all", MIGRATION_CAPABILITY_RDMA_PIN_ALL),
> >>> > DEFINE_PROP_MIG_CAP("x-auto-converge", MIGRATION_CAPABILITY_AUTO_CONVERGE),
> >>> > - DEFINE_PROP_MIG_CAP("x-zero-blocks", MIGRATION_CAPABILITY_ZERO_BLOCKS),
> >>> > DEFINE_PROP_MIG_CAP("x-events", MIGRATION_CAPABILITY_EVENTS),
> >>> > DEFINE_PROP_MIG_CAP("x-postcopy-ram", MIGRATION_CAPABILITY_POSTCOPY_RAM),
> >>> > DEFINE_PROP_MIG_CAP("x-postcopy-preempt",
> >>>
> >>> Property of (pseudo-)device "migration". The "x-" prefix suggests we
> >>> expect management software not to rely on it. Okay.
> >>>
> >>> [...]
> >>>
> >>> > diff --git a/qapi/migration.json b/qapi/migration.json
> >>> > index b66cccf107..82d0fc962e 100644
> >>> > --- a/qapi/migration.json
> >>> > +++ b/qapi/migration.json
> >>> > @@ -389,13 +389,6 @@
> >>> > # footprint is mlock()'d on demand or all at once. Refer to
> >>> > # docs/rdma.txt for usage. Disabled by default. (since 2.0)
> >>> > #
> >>> > -# @zero-blocks: During storage migration encode blocks of zeroes
> >>> > -# efficiently. This essentially saves 1MB of zeroes per block on
> >>> > -# the wire. Enabling requires source and target VM to support
> >>> > -# this feature. To enable it is sufficient to enable the
> >>> > -# capability on the source VM. The feature is disabled by
> >>> > -# default. (since 1.6)
> >>> > -#
> >>> > # @events: generate events for each migration state change (since 2.4)
> >>> > #
> >>> > # @auto-converge: If enabled, QEMU will automatically throttle down
> >>> > @@ -483,7 +476,7 @@
> >>> > # Since: 1.2
> >>> > ##
> >>> > { 'enum': 'MigrationCapability',
> >>> > - 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
> >>> > + 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge',
> >>> > 'events', 'postcopy-ram',
> >>> > { 'name': 'x-colo', 'features': [ 'unstable' ] },
> >>> > 'release-ram',
> >>>
> >>> This is used by migrate-set-capabilities and query-migrate-capabilities,
> >>> via ['MigrationCapabilityStatus'].
> >>>
> >>> query-migrate-capabilities is unaffected: it couldn't return zero-blocks
> >>> anymore even before the patch.
> >>>
> >>> migrate-set-capabilities changes incompatibly, I'm afraid. Before the
> >>> patch:
> >>>
> >>> {"execute": "migrate-set-capabilities", "arguments": {"capabilities": [{"capability": "zero-blocks", "state": true}]}}
> >>> {"return": {}}
> >>>
> >>> Afterwards:
> >>>
> >>> {"error": {"class": "GenericError", "desc": "Parameter 'capability' does not accept value 'zero-blocks'"}}
> >>>
> >>> If we had somehow rejected the capability when it made no sense,
> >>> removing it now it never makes sense would be obviously fine.
> >>>
> >>> The straight & narrow path is to deprecate now, remove later.
> >>
> >> I wonder whether we can make this one simpler, as IIUC this cap depends on
> >> the block migration feature, which properly went through the deprecation
> >> process and got removed in the previous release.
> >>
> >> IOW, currently QEMU behaves the same with this cap on/off, ignoring it
> >> completely. I think it means the deprecation message (even if we provide
> >> some for two extra releases..) wouldn't be anything helpful as anyone who
> >> uses this feature already got affected before this patch.. this feature,
> >> together with block migration, are simply all gone already?
> >
> > We break compatibility for users who supply capability @zero-blocks even
> > though they are not using block migration.
> >
> > Before this patch, the capability is silently ignored.
> >
> > Afterwards, we reject it.
> >
> > This harmless misuse was *not* affected by our prior removal of block
> > migration.
> >
> > It *is* affected by the proposed removal of the capability.
>
> How does this policy_skip thing works? Could we automatically warn
> whenever a capability has the 'deprecated' feature in migration.json?
>
> Also, some of the incompatibility errors in migrate_caps_check() could
> be simplified with something like a new:
> 'features': [ 'conflicts': [ 'cap1', 'cap2' ] ]
> to indicate which caps are incompatible between themselves.
>
> >
> > We either treat this in struct accordance to our rules: deprecate now,
> > remove later. Or we bend our them:
> >
> >>> If we believe nothing relies on it, we can bend the rules and remove
> >>> right away.
> >
> > Not for me to decide.
> >
>
> I'm fine either way, but in any case:
OK, so I'll split my code to just remove the dead function rather than the
actual capability; Thanks for Fabiano for doing the Deprecation stuff!
Dave
> -- >8 --
> >From 3ff313a52e37b8cb407c900d7a1aa266560aebb7 Mon Sep 17 00:00:00 2001
> From: Fabiano Rosas <farosas@suse.de>
> Date: Thu, 19 Sep 2024 09:49:44 -0300
> Subject: [PATCH] migration: Deprecate zero-blocks capability
>
> The zero-blocks capability was meant to be used along with the block
> migration, which has been removed already in commit eef0bae3a7
> ("migration: Remove block migration").
>
> Setting zero-blocks is currently a noop, but the outright removal of
> the capability would cause and error in case some users are still
> setting it. Put the capability through the deprecation process.
>
> Signed-off-by: Fabiano Rosas <farosas@suse.de>
> ---
> docs/about/deprecated.rst | 6 ++++++
> migration/options.c | 4 ++++
> qapi/migration.json | 5 ++++-
> 3 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst
> index ed31d4b0b2..47cabb6fcc 100644
> --- a/docs/about/deprecated.rst
> +++ b/docs/about/deprecated.rst
> @@ -476,3 +476,9 @@ usage of providing a file descriptor to a plain file has been
> deprecated in favor of explicitly using the ``file:`` URI with the
> file descriptor being passed as an ``fdset``. Refer to the ``add-fd``
> command documentation for details on the ``fdset`` usage.
> +
> +``zero-blocks`` capability (since 9.2)
> +''''''''''''''''''''''''''''''''''''''
> +
> +The ``zero-blocks`` capability was part of the block migration which
> +doesn't exist anymore since it was removed in QEMU v9.1.
> diff --git a/migration/options.c b/migration/options.c
> index 147cd2b8fd..b828bad0d9 100644
> --- a/migration/options.c
> +++ b/migration/options.c
> @@ -457,6 +457,10 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
> ERRP_GUARD();
> MigrationIncomingState *mis = migration_incoming_get_current();
>
> + if (new_caps[MIGRATION_CAPABILITY_ZERO_BLOCKS]) {
> + warn_report("zero-blocks capability is deprecated");
> + }
> +
> #ifndef CONFIG_REPLICATION
> if (new_caps[MIGRATION_CAPABILITY_X_COLO]) {
> error_setg(errp, "QEMU compiled without replication module"
> diff --git a/qapi/migration.json b/qapi/migration.json
> index b66cccf107..3af6aa1740 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -479,11 +479,14 @@
> # Features:
> #
> # @unstable: Members @x-colo and @x-ignore-shared are experimental.
> +# @deprecated: Member @zero-blocks is deprecated as being part of
> +# block migration which was already removed.
> #
> # Since: 1.2
> ##
> { 'enum': 'MigrationCapability',
> - 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
> + 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge',
> + { 'name': 'zero-blocks', 'features': [ 'deprecated' ] },
> 'events', 'postcopy-ram',
> { 'name': 'x-colo', 'features': [ 'unstable' ] },
> 'release-ram',
> --
> 2.35.3
>
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
next prev parent reply other threads:[~2024-09-19 13:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 0:02 [PATCH 0/3] Migration deadcode removal dave
2024-09-18 0:02 ` [PATCH 1/3] migration: Remove migrate_cap_set dave
2024-09-19 12:12 ` Fabiano Rosas
2024-09-18 0:02 ` [PATCH 2/3] migration: Remove unused zero-blocks capability dave
2024-09-18 5:52 ` Markus Armbruster
2024-09-18 16:27 ` Peter Xu
2024-09-19 10:39 ` Markus Armbruster
2024-09-19 12:57 ` Fabiano Rosas
2024-09-19 13:00 ` Dr. David Alan Gilbert [this message]
2024-09-19 13:43 ` Peter Xu
2024-09-18 0:02 ` [PATCH 3/3] migration: Remove unused socket_send_channel_create_sync dave
2024-09-19 12:12 ` Fabiano Rosas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZuwgcgLfOHkOMqHT@gallifrey \
--to=dave@treblig.org \
--cc=armbru@redhat.com \
--cc=eblake@redhat.com \
--cc=farosas@suse.de \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).