Re: [PATCH v2 2/4] m25p80: Improve command handling for Jedec commands

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

On 2/6/20 7:32 PM, Guenter Roeck wrote:
> When requesting JEDEC data using the JEDEC_READ command, the Linux kernel
> always requests 6 bytes. The current implementation only returns three
> bytes, and interprets the remaining three bytes as new commands.
> While this does not matter most of the time, it is at the very least
> confusing. To avoid the problem, always report up to 6 bytes of JEDEC
> data. Fill remaining data with 0.
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2: Split patch into two parts; improved decription
> 
>   hw/block/m25p80.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index 5ff8d270c4..53bf63856f 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -1040,8 +1040,11 @@ static void decode_new_cmd(Flash *s, uint32_t value)
>           for (i = 0; i < s->pi->id_len; i++) {
>               s->data[i] = s->pi->id[i];
>           }
> +        for (; i < SPI_NOR_MAX_ID_LEN; i++) {
> +            s->data[i] = 0;
> +        }
>   
> -        s->len = s->pi->id_len;
> +        s->len = SPI_NOR_MAX_ID_LEN;
>           s->pos = 0;
>           s->state = STATE_READING_DATA;
>           break;
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>