From: Jason Wang <jasowang@redhat.com>
To: andrew@daynix.com, qemu-devel@nongnu.org
Cc: dmitry.fleytman@gmail.com
Subject: Re: [PATCH v3 2/2] hw/net: Added basic IPv6 software fragmentation
Date: Fri, 17 Jul 2020 14:05:09 +0800 [thread overview]
Message-ID: <a7764ed2-0fdb-39bd-55ba-eb308ea4b36e@redhat.com> (raw)
In-Reply-To: <20200716035325.1406919-2-andrew@daynix.com>
On 2020/7/16 上午11:53, andrew@daynix.com wrote:
> From: Andrew <andrew@daynix.com>
>
> The basic IPv6 fragmentation - adding 'frag' extension to
> the packet, overall shares some logic with IPv4. It works,
> but there are still issues with a combination of
> extensions - in the future, it would require refactoring
> work to implement workflow with IPv6 and extension.
> "Jumbo option" isn't added yet, until
> qemu supports packets greater than 64K.
>
> Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Queued for 5.2
Thanks
> ---
> hw/net/net_tx_pkt.c | 7 ++--
> include/net/eth.h | 14 +++++--
> net/eth.c | 99 ++++++++++++++++++++++++++++++++++++++++++---
> 3 files changed, 109 insertions(+), 11 deletions(-)
>
> diff --git a/hw/net/net_tx_pkt.c b/hw/net/net_tx_pkt.c
> index 9560e4a49e..74044c6618 100644
> --- a/hw/net/net_tx_pkt.c
> +++ b/hw/net/net_tx_pkt.c
> @@ -589,10 +589,11 @@ static bool net_tx_pkt_do_sw_fragmentation(struct NetTxPkt *pkt,
>
> more_frags = (fragment_offset + fragment_len < pkt->payload_len);
>
> - eth_setup_ip4_fragmentation(l2_iov_base, l2_iov_len, l3_iov_base,
> - l3_iov_len, fragment_len, fragment_offset, more_frags);
> + eth_setup_ip_fragmentation(l2_iov_base, l2_iov_len, l3_iov_base,
> + &l3_iov_len, ETH_MAX_IP_DGRAM_LEN,
> + fragment_len, fragment_offset, more_frags);
>
> - eth_fix_ip4_checksum(l3_iov_base, l3_iov_len);
> + fragment[NET_TX_PKT_FRAGMENT_L3_HDR_POS].iov_len = l3_iov_len;
>
> net_tx_pkt_sendv(pkt, nc, fragment, dst_idx);
>
> diff --git a/include/net/eth.h b/include/net/eth.h
> index 0671be6916..05c75ac9fc 100644
> --- a/include/net/eth.h
> +++ b/include/net/eth.h
> @@ -139,6 +139,14 @@ struct ip6_ext_hdr_routing {
> uint8_t rsvd[4];
> };
>
> +struct ip6_ext_hdr_fragment {
> + uint8_t nxt;
> + uint8_t res0;
> + uint16_t off;
> + uint32_t id;
> +};
> +
> +
> struct ip6_option_hdr {
> #define IP6_OPT_PAD1 (0x00)
> #define IP6_OPT_HOME (0xC9)
> @@ -399,9 +407,9 @@ void eth_get_protocols(const struct iovec *iov, int iovcnt,
> eth_ip4_hdr_info *ip4hdr_info,
> eth_l4_hdr_info *l4hdr_info);
>
> -void eth_setup_ip4_fragmentation(const void *l2hdr, size_t l2hdr_len,
> - void *l3hdr, size_t l3hdr_len,
> - size_t l3payload_len,
> +void eth_setup_ip_fragmentation(const void *l2hdr, size_t l2hdr_len,
> + void *l3hdr, size_t *l3hdr_len,
> + size_t l3hdr_max_len, size_t l3payload_len,
> size_t frag_offset, bool more_frags);
>
> void
> diff --git a/net/eth.c b/net/eth.c
> index 0c1d413ee2..067111526d 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -314,10 +314,65 @@ eth_strip_vlan_ex(const struct iovec *iov, int iovcnt, size_t iovoff,
> return 0;
> }
>
> +static bool eth_is_ip6_extension_header_type(uint8_t hdr_type);
> +
> +static void *eth_ip6_find_ext(struct ip6_header *ip6, uint8_t ext_type)
> +{
> + uint8_t curr_ext_hdr_type = ip6->ip6_nxt;
> + struct ip6_ext_hdr *ext_hdr = (struct ip6_ext_hdr *)(ip6 + 1);
> + for (; eth_is_ip6_extension_header_type(curr_ext_hdr_type);) {
> + if (curr_ext_hdr_type == ext_type) {
> + return ext_hdr;
> + }
> + curr_ext_hdr_type = ext_hdr->ip6r_nxt;
> + ext_hdr = (struct ip6_ext_hdr *)(((uint8_t *)ext_hdr)
> + + (ext_hdr->ip6r_len + 1) * IP6_EXT_GRANULARITY);
> + }
> +
> + return NULL;
> +}
> +
> +/*
> + * To add an extension - there is should be
> + * enough memory 'behind' the ip6 header.
> + */
> +static void *eth_ip6_add_ext_nonsafe(struct ip6_header *ip6, uint8_t ext_type)
> +{
> + uint8_t curr_ext_hdr_type = ip6->ip6_nxt;
> + struct ip6_ext_hdr *ext_hdr = (struct ip6_ext_hdr *)(ip6 + 1);
> + struct ip6_ext_hdr *ext_hdr_prev = NULL;
> +
> + if (!eth_is_ip6_extension_header_type(curr_ext_hdr_type)) {
> + ext_hdr->ip6r_nxt = ip6->ip6_nxt;
> + ip6->ip6_nxt = ext_type;
> + return ext_hdr;
> + }
> +
> + ext_hdr_prev = ext_hdr;
> + curr_ext_hdr_type = ext_hdr->ip6r_nxt;
> + ext_hdr = (struct ip6_ext_hdr *)(((uint8_t *)ext_hdr)
> + + (ext_hdr->ip6r_len + 1) * IP6_EXT_GRANULARITY);
> +
> + for (; eth_is_ip6_extension_header_type(curr_ext_hdr_type);) {
> + ext_hdr_prev = ext_hdr;
> + curr_ext_hdr_type = ext_hdr->ip6r_nxt;
> + ext_hdr = (struct ip6_ext_hdr *)(((uint8_t *)ext_hdr)
> + + (ext_hdr->ip6r_len + 1) * IP6_EXT_GRANULARITY);
> + }
> +
> + ext_hdr->ip6r_nxt = ext_hdr_prev->ip6r_nxt;
> + ext_hdr_prev->ip6r_nxt = ext_type;
> +
> + return ext_hdr;
> +}
> +
> +/* When IP6_FRAGMENT added, first 'id' would be 0x71656d75 */
> +static const uint32_t s_first_fragment_identificator = 0x71656d75; /* 'qemu' */
> +
> void
> -eth_setup_ip4_fragmentation(const void *l2hdr, size_t l2hdr_len,
> - void *l3hdr, size_t l3hdr_len,
> - size_t l3payload_len,
> +eth_setup_ip_fragmentation(const void *l2hdr, size_t l2hdr_len,
> + void *l3hdr, size_t *l3hdr_len,
> + size_t l3hdr_max_len, size_t l3payload_len,
> size_t frag_offset, bool more_frags)
> {
> const struct iovec l2vec = {
> @@ -325,7 +380,9 @@ eth_setup_ip4_fragmentation(const void *l2hdr, size_t l2hdr_len,
> .iov_len = l2hdr_len
> };
>
> - if (eth_get_l3_proto(&l2vec, 1, l2hdr_len) == ETH_P_IP) {
> + uint16_t l3_proto = eth_get_l3_proto(&l2vec, 1, l2hdr_len);
> +
> + if (l3_proto == ETH_P_IP) {
> uint16_t orig_flags;
> struct ip_header *iphdr = (struct ip_header *) l3hdr;
> uint16_t frag_off_units = frag_offset / IP_FRAG_UNIT_SIZE;
> @@ -337,7 +394,39 @@ eth_setup_ip4_fragmentation(const void *l2hdr, size_t l2hdr_len,
> orig_flags = be16_to_cpu(iphdr->ip_off) & ~(IP_OFFMASK|IP_MF);
> new_ip_off = frag_off_units | orig_flags | (more_frags ? IP_MF : 0);
> iphdr->ip_off = cpu_to_be16(new_ip_off);
> - iphdr->ip_len = cpu_to_be16(l3payload_len + l3hdr_len);
> + iphdr->ip_len = cpu_to_be16(l3payload_len + *l3hdr_len);
> +
> + eth_fix_ip4_checksum(l3hdr, *l3hdr_len);
> + } else if (l3_proto == ETH_P_IPV6) {
> + struct ip6_header *ip6 = (struct ip6_header *) l3hdr;
> +
> + struct ip6_ext_hdr_fragment *frag_ext = NULL;
> +
> + /* Find frag extension */
> + frag_ext = eth_ip6_find_ext(ip6, IP6_FRAGMENT);
> + if (frag_ext == NULL) {
> + /* No frag extension? Add one */
> + if (*l3hdr_len + sizeof(*frag_ext) > l3hdr_max_len) {
> + /*
> + * TODO:
> + * For now, qemu's L3 buffer allocated with NetTxPkt
> + * and have enough memory(buffer allocated with 65K bytes
> + * ETH_MAX_IP_DGRAM_LEN = 0xFFFF)
> + * for additional extensions.
> + */
> + return; /* TODO: request to reallocate l3hdr */
> + }
> + frag_ext = eth_ip6_add_ext_nonsafe(ip6, IP6_FRAGMENT);
> + *l3hdr_len += sizeof(*frag_ext);
> + static uint32_t s_id = s_first_fragment_identificator;
> + frag_ext->id = cpu_to_be32(s_id);
> + ++s_id;
> + }
> +
> + frag_ext->off = cpu_to_be16((frag_offset / IP_FRAG_UNIT_SIZE) << 3
> + | (uint16_t)!!more_frags);
> +
> + ip6->ip6_plen = cpu_to_be16(l3payload_len + *l3hdr_len - sizeof(*ip6));
> }
> }
>
next prev parent reply other threads:[~2020-07-17 6:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 3:53 [PATCH v3 1/2] hw/net: Added plen fix for IPv6 andrew
2020-07-16 3:53 ` [PATCH v3 2/2] hw/net: Added basic IPv6 software fragmentation andrew
2020-07-17 6:05 ` Jason Wang [this message]
2020-07-17 6:04 ` [PATCH v3 1/2] hw/net: Added plen fix for IPv6 Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7764ed2-0fdb-39bd-55ba-eb308ea4b36e@redhat.com \
--to=jasowang@redhat.com \
--cc=andrew@daynix.com \
--cc=dmitry.fleytman@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).