From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Igor Mammedov <imammedo@redhat.com>,
Ani Sinha <anisinha@redhat.com>,
Dongjiu Geng <gengdongjiu1@gmail.com>,
qemu-arm@nongnu.org
Subject: [PULL 30/48] acpi/ghes: better handle source_id and notification
Date: Wed, 15 Jan 2025 13:10:03 -0500 [thread overview]
Message-ID: <a85a3b729b3c31d8cc878017308997a8112655b2.1736964488.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1736964487.git.mst@redhat.com>
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GHES has two fields that are stored on HEST error source
blocks associated with notifications:
- notification type, which is a number defined at the ACPI spec
containing several arch-specific synchronous and assynchronous
types;
- source id, which is a HW/FW defined number, used to distinguish
between different implemented sources.
There could be several sources with the same notification type,
which is dependent of the way each architecture maps notifications.
Right now, build_ghes_v2() hardcodes a 1:1 mapping between such
fields. Move it to two independent parameters, allowing the
caller function to fill both.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <133ff72ea1041fed7dbcf97b7a2b0f4dfacde31a.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/acpi/ghes.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
index 4a6c45bcb4..29cd7e4d81 100644
--- a/hw/acpi/ghes.c
+++ b/hw/acpi/ghes.c
@@ -284,9 +284,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
}
/* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
+static void build_ghes_v2(GArray *table_data,
+ BIOSLinker *linker,
+ enum AcpiGhesNotifyType notify,
+ uint16_t source_id)
{
uint64_t address_offset;
+
/*
* Type:
* Generic Hardware Error Source version 2(GHESv2 - Type 10)
@@ -316,18 +320,8 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
- switch (source_id) {
- case ACPI_HEST_SRC_ID_SEA:
- /*
- * Notification Structure
- * Now only enable ARMv8 SEA notification type
- */
- build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
- break;
- default:
- error_report("Not support this error source");
- abort();
- }
+ /* Notification Structure */
+ build_ghes_hw_error_notification(table_data, notify);
/* Error Status Block Length */
build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
@@ -369,7 +363,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
/* Error Source Count */
build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
- build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
+ build_ghes_v2(table_data, linker,
+ ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
acpi_table_end(linker, &table);
}
--
MST
next prev parent reply other threads:[~2025-01-15 18:12 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-15 18:08 [PULL 00/48] virtio,pc,pci: features, fixes, cleanups Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 01/48] virtio-gpu: Add definition for resource_uuid feature Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 02/48] pci: ensure valid link status bits for downstream ports Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 03/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 04/48] cpuhp: make sure that remove events are handled within the same SCI Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 05/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 06/48] intel_iommu: Use the latest fault reasons defined by spec Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 07/48] intel_iommu: Make pasid entry type check accurate Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 08/48] intel_iommu: Add a placeholder variable for scalable mode stage-1 translation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 09/48] intel_iommu: Flush stage-2 cache in PASID-selective PASID-based iotlb invalidation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 10/48] intel_iommu: Rename slpte to pte Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 11/48] intel_iommu: Implement stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 12/48] intel_iommu: Check if the input address is canonical Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 13/48] intel_iommu: Check stage-1 translation result with interrupt range Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 14/48] intel_iommu: Set accessed and dirty bits during stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 15/48] intel_iommu: Flush stage-1 cache in iotlb invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 16/48] intel_iommu: Process PASID-based " Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 17/48] intel_iommu: Add an internal API to find an address space with PASID Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 18/48] intel_iommu: Add support for PASID-based device IOTLB invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 19/48] intel_iommu: piotlb invalidation should notify unmap Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 20/48] tests/acpi: q35: allow DMAR acpi table changes Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 21/48] intel_iommu: Set default aw_bits to 48 starting from QEMU 9.2 Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 22/48] tests/acpi: q35: Update host address width in DMAR Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 23/48] intel_iommu: Introduce a property x-flts for stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 24/48] intel_iommu: Introduce a property to control FS1GP cap bit setting Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 25/48] tests/qtest: Add intel-iommu test Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 26/48] pci/msix: Fix msix pba read vector poll end calculation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 27/48] acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 28/48] acpi/ghes: simplify acpi_ghes_record_errors() code Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 29/48] acpi/ghes: simplify the per-arch caller to build HEST table Michael S. Tsirkin
2025-01-15 18:10 ` Michael S. Tsirkin [this message]
2025-01-15 18:10 ` [PULL 31/48] acpi/ghes: Fix acpi_ghes_record_errors() argument Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 32/48] acpi/ghes: Remove a duplicated out of bounds check Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 33/48] acpi/ghes: Change the type for source_id Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 34/48] acpi/ghes: don't check if physical_address is not zero Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 35/48] acpi/ghes: make the GHES record generation more generic Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 36/48] acpi/ghes: better name GHES memory error function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 37/48] acpi/ghes: don't crash QEMU if ghes GED is not found Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 38/48] acpi/ghes: rename etc/hardware_error file macros Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 39/48] acpi/ghes: better name the offset of the hardware error firmware Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 40/48] acpi/ghes: move offset calculus to a separate function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 41/48] acpi/ghes: Change ghes fill logic to work with only one source Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 42/48] docs: acpi_hest_ghes: fix documentation for CPER size Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 43/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 44/48] pci: acpi: Windows 'PCI Label Id' bug workaround Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 45/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 46/48] hw/cxl: Fix msix_notify: Assertion `vector < dev->msix_entries_nr` Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 47/48] vhost: Add stubs for the migration state transfer interface Michael S. Tsirkin
2025-01-15 18:11 ` [PULL 48/48] virtio-net: vhost-user: Implement internal migration Michael S. Tsirkin
2025-01-15 18:15 ` [PULL 00/48] virtio,pc,pci: features, fixes, cleanups David Woodhouse
2025-01-15 22:42 ` Michael S. Tsirkin
2025-01-15 23:05 ` David Woodhouse
2025-01-16 7:05 ` Michael S. Tsirkin
2025-01-16 14:06 ` David Woodhouse
2025-01-16 7:06 ` Michael S. Tsirkin
2025-01-16 22:10 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a85a3b729b3c31d8cc878017308997a8112655b2.1736964488.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=anisinha@redhat.com \
--cc=gengdongjiu1@gmail.com \
--cc=imammedo@redhat.com \
--cc=mchehab+huawei@kernel.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).