qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fan Ni <nifan.cxl@gmail.com>
To: anisa.su887@gmail.com
Cc: qemu-devel@nongnu.org, Jonathan.Cameron@huawei.com,
	nifan.cxl@gmail.com, dave@stgolabs.net,
	linux-cxl@vger.kernel.org, Anisa Su <anisa.su@samsung.com>
Subject: Re: [PATCH v2 02/10] cxl-mailbox-utils: 0x5600 - FMAPI Get DCD Info
Date: Tue, 20 May 2025 08:59:49 -0700	[thread overview]
Message-ID: <aCym9X9jfqlVi1V4@lg> (raw)
In-Reply-To: <20250508001754.122180-3-anisa.su887@gmail.com>

On Thu, May 08, 2025 at 12:00:58AM +0000, anisa.su887@gmail.com wrote:
> From: Anisa Su <anisa.su@samsung.com>
> 
> FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1.
> 
> Signed-off-by: Anisa Su <anisa.su@samsung.com>

LGTM. minor comments inline.

Reviewed-by: Fan Ni <fan.ni@samsung.com>

> ---
>  hw/cxl/cxl-mailbox-utils.c   | 56 ++++++++++++++++++++++++++++++++++++
>  hw/cxl/i2c_mctp_cxl.c        |  6 ++--
>  hw/mem/cxl_type3.c           |  4 +++
>  include/hw/cxl/cxl_device.h  |  1 +
>  include/hw/cxl/cxl_opcodes.h |  3 ++
>  5 files changed, 68 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index ed3294530f..d3c69233b8 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -3280,6 +3280,52 @@ static CXLRetCode cmd_dcd_release_dyn_cap(const struct cxl_cmd *cmd,
>      return CXL_MBOX_SUCCESS;
>  }
>  
> +/* CXL r3.2 section 7.6.7.6.1: Get DCD Info (Opcode 5600h) */
> +static CXLRetCode cmd_fm_get_dcd_info(const struct cxl_cmd *cmd,
> +                                      uint8_t *payload_in,
> +                                      size_t len_in,
> +                                      uint8_t *payload_out,
> +                                      size_t *len_out,
> +                                      CXLCCI *cci)
> +{
> +    struct {
> +        uint8_t num_hosts;
> +        uint8_t num_regions_supported;
> +        uint8_t rsvd1[2];
> +        uint16_t add_select_policy_bitmask;

           uint16_t supported_add_sel_policy_bitmask;

> +        uint8_t rsvd2[2];
> +        uint16_t release_select_policy_bitmask;

           uint16_t supported_removal_policy_bitmask;

Fan
> +        uint8_t sanitize_on_release_bitmask;
> +        uint8_t rsvd3;
> +        uint64_t total_dynamic_capacity;
> +        uint64_t region_blk_size_bitmasks[8];
> +    } QEMU_PACKED *out = (void *)payload_out;
> +    CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> +    CXLDCRegion *region;
> +    int i;
> +
> +    out->num_hosts = 1;
> +    out->num_regions_supported = ct3d->dc.num_regions;
> +    stw_le_p(&out->add_select_policy_bitmask,
> +             BIT(CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE));
> +    stw_le_p(&out->release_select_policy_bitmask,
> +             BIT(CXL_EXTENT_REMOVAL_POLICY_PRESCRIPTIVE));
> +    out->sanitize_on_release_bitmask = 0;
> +
> +    stq_le_p(&out->total_dynamic_capacity,
> +             ct3d->dc.total_capacity / CXL_CAPACITY_MULTIPLIER);
> +
> +    for (i = 0; i < ct3d->dc.num_regions; i++) {
> +        region = &ct3d->dc.regions[i];
> +        memcpy(&out->region_blk_size_bitmasks[i],
> +               &region->supported_blk_size_bitmask,
> +               sizeof(out->region_blk_size_bitmasks[i]));
> +    }
> +
> +    *len_out = sizeof(*out);
> +    return CXL_MBOX_SUCCESS;
> +}
> +
>  static const struct cxl_cmd cxl_cmd_set[256][256] = {
>      [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
>          cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3401,6 +3447,11 @@ static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
>                                       cmd_tunnel_management_cmd, ~0, 0 },
>  };
>  
> +static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
> +    [FMAPI_DCD_MGMT][GET_DCD_INFO] = { "GET_DCD_INFO",
> +        cmd_fm_get_dcd_info, 0, 0 },
> +};
> +
>  /*
>   * While the command is executing in the background, the device should
>   * update the percentage complete in the Background Command Status Register
> @@ -3703,7 +3754,12 @@ void cxl_initialize_t3_fm_owned_ld_mctpcci(CXLCCI *cci, DeviceState *d,
>                                             DeviceState *intf,
>                                             size_t payload_max)
>  {
> +    CXLType3Dev *ct3d = CXL_TYPE3(d);
> +
>      cxl_copy_cci_commands(cci, cxl_cmd_set_t3_fm_owned_ld_mctp);
> +    if (ct3d->dc.num_regions) {
> +        cxl_copy_cci_commands(cci, cxl_cmd_set_fm_dcd);
> +    }
>      cci->d = d;
>      cci->intf = intf;
>      cxl_init_cci(cci, payload_max);
> diff --git a/hw/cxl/i2c_mctp_cxl.c b/hw/cxl/i2c_mctp_cxl.c
> index 7d2cbc3b75..dd5fc4f393 100644
> --- a/hw/cxl/i2c_mctp_cxl.c
> +++ b/hw/cxl/i2c_mctp_cxl.c
> @@ -29,6 +29,7 @@
>  #include "hw/pci/pcie_port.h"
>  #include "hw/qdev-properties.h"
>  #include "hw/registerfields.h"
> +#include "hw/cxl/cxl_opcodes.h"
>  
>  #define TYPE_I2C_MCTP_CXL "i2c_mctp_cxl"
>  
> @@ -198,9 +199,10 @@ static void i2c_mctp_cxl_handle_message(MCTPI2CEndpoint *mctp)
>           */
>  
>          if (!(msg->message_type == MCTP_MT_CXL_TYPE3 &&
> -              msg->command_set < 0x51) &&
> +              msg->command_set < PHYSICAL_SWITCH) &&
>              !(msg->message_type == MCTP_MT_CXL_FMAPI &&
> -              msg->command_set >= 0x51 && msg->command_set < 0x56)) {
> +              msg->command_set >= PHYSICAL_SWITCH &&
> +              msg->command_set < GLOBAL_MEMORY_ACCESS_EP_MGMT)) {
>              buf->rc = CXL_MBOX_UNSUPPORTED;
>              st24_le_p(buf->pl_length, len_out);
>              s->len = s->pos;
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 11c38a9292..7129da0940 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -8,6 +8,7 @@
>   *
>   * SPDX-License-Identifier: GPL-v2-only
>   */
> +#include <math.h>
>  
>  #include "qemu/osdep.h"
>  #include "qemu/units.h"
> @@ -766,6 +767,8 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
>      uint64_t region_len;
>      uint64_t decode_len;
>      uint64_t blk_size = 2 * MiB;
> +    /* Only 1 block size is supported for now. */
> +    uint64_t supported_blk_size_bitmask = BIT((int) log2(blk_size));
>      CXLDCRegion *region;
>      MemoryRegion *mr;
>      uint64_t dc_size;
> @@ -811,6 +814,7 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
>              .block_size = blk_size,
>              /* dsmad_handle set when creating CDAT table entries */
>              .flags = 0,
> +            .supported_blk_size_bitmask = supported_blk_size_bitmask,
>          };
>          ct3d->dc.total_capacity += region->len;
>          region->blk_bitmap = bitmap_new(region->len / region->block_size);
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index ca515cab13..bebed04085 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -608,6 +608,7 @@ typedef struct CXLDCRegion {
>      uint32_t dsmadhandle;
>      uint8_t flags;
>      unsigned long *blk_bitmap;
> +    uint64_t supported_blk_size_bitmask;
>  } CXLDCRegion;
>  
>  typedef struct CXLSetFeatureInfo {
> diff --git a/include/hw/cxl/cxl_opcodes.h b/include/hw/cxl/cxl_opcodes.h
> index 26d3a99e8a..c4c233665e 100644
> --- a/include/hw/cxl/cxl_opcodes.h
> +++ b/include/hw/cxl/cxl_opcodes.h
> @@ -61,4 +61,7 @@ enum {
>          #define MANAGEMENT_COMMAND     0x0
>      MHD = 0x55,
>          #define GET_MHD_INFO 0x0
> +    FMAPI_DCD_MGMT = 0x56,
> +        #define GET_DCD_INFO 0x0
> +    GLOBAL_MEMORY_ACCESS_EP_MGMT = 0X59
>  };
> -- 
> 2.47.2
> 

-- 
Fan Ni


  reply	other threads:[~2025-05-20 16:00 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-08  0:00 [PATCH v2 00/10] CXL: FMAPI DCD Management Commands 0x5600-0x5605 anisa.su887
2025-05-08  0:00 ` [PATCH v2 01/10] cxl-mailbox-utils: Move opcodes enum to new header file anisa.su887
2025-05-20 15:37   ` Fan Ni
2025-05-20 17:33     ` Anisa Su
2025-05-30 13:43       ` Jonathan Cameron via
2025-05-30 19:57         ` Anisa Su
2025-05-08  0:00 ` [PATCH v2 02/10] cxl-mailbox-utils: 0x5600 - FMAPI Get DCD Info anisa.su887
2025-05-20 15:59   ` Fan Ni [this message]
2025-05-30 14:07   ` Jonathan Cameron via
2025-05-08  0:00 ` [PATCH v2 03/10] cxl/type3: Add dsmas_flags to CXLDCRegion struct anisa.su887
2025-05-20 16:05   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 04/10] cxl-mailbox-utils: 0x5601 - FMAPI Get Host Region Config anisa.su887
2025-05-20 16:23   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 05/10] cxl_events.h: Move definition for dynamic_capacity_uuid and enum for DC event types anisa.su887
2025-05-20 16:44   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 06/10] hw/cxl_type3: Add DC Region bitmap lock anisa.su887
2025-05-20 16:56   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 07/10] cxl-mailbox-utils: 0x5602 - FMAPI Set DC Region Config anisa.su887
2025-05-20 13:29   ` Jonathan Cameron via
2025-05-20 17:07   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 08/10] cxl-mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists anisa.su887
2025-05-20 17:18   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 09/10] cxl-mailbox-utils: 0x5604 - FMAPI Initiate DC Add anisa.su887
2025-05-20 13:34   ` Jonathan Cameron via
2025-05-20 18:08   ` Fan Ni
2025-05-08  0:01 ` [PATCH v2 10/10] cxl-mailbox-utils: 0x5605 - FMAPI Initiate DC Release anisa.su887
2025-05-20 13:39 ` [PATCH v2 00/10] CXL: FMAPI DCD Management Commands 0x5600-0x5605 Jonathan Cameron via
2025-05-30 14:26   ` Jonathan Cameron via
2025-06-02 17:46     ` Anisa Su
2025-06-06  0:28       ` Anisa Su
2025-06-10 14:47         ` Jonathan Cameron via

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aCym9X9jfqlVi1V4@lg \
    --to=nifan.cxl@gmail.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=anisa.su887@gmail.com \
    --cc=anisa.su@samsung.com \
    --cc=dave@stgolabs.net \
    --cc=linux-cxl@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).