qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@amd.com>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: <qemu-devel@nongnu.org>, <edgar.iglesias@gmail.com>, <philmd@linaro.org>
Subject: Re: [PATCH v2 01/10] target/microblaze: Split out mb_unaligned_access_internal
Date: Sun, 25 May 2025 21:26:18 +0200	[thread overview]
Message-ID: <aDNu2nGrPyIc-gMC@zapote> (raw)
In-Reply-To: <20250525160220.222154-2-richard.henderson@linaro.org>

On Sun, May 25, 2025 at 05:02:11PM +0100, Richard Henderson wrote:
> Use an explicit 64-bit type for the address to store in EAR.
> 
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>


> ---
>  target/microblaze/helper.c | 64 +++++++++++++++++++++-----------------
>  1 file changed, 36 insertions(+), 28 deletions(-)
> 
> diff --git a/target/microblaze/helper.c b/target/microblaze/helper.c
> index 9203192483..5fe81e4b16 100644
> --- a/target/microblaze/helper.c
> +++ b/target/microblaze/helper.c
> @@ -27,6 +27,42 @@
>  #include "qemu/host-utils.h"
>  #include "exec/log.h"
>  
> +
> +G_NORETURN
> +static void mb_unaligned_access_internal(CPUState *cs, uint64_t addr,
> +                                         uintptr_t retaddr)
> +{
> +    CPUMBState *env = cpu_env(cs);
> +    uint32_t esr, iflags;
> +
> +    /* Recover the pc and iflags from the corresponding insn_start.  */
> +    cpu_restore_state(cs, retaddr);
> +    iflags = env->iflags;
> +
> +    qemu_log_mask(CPU_LOG_INT,
> +                  "Unaligned access addr=0x%" PRIx64 " pc=%x iflags=%x\n",
> +                  addr, env->pc, iflags);
> +
> +    esr = ESR_EC_UNALIGNED_DATA;
> +    if (likely(iflags & ESR_ESS_FLAG)) {
> +        esr |= iflags & ESR_ESS_MASK;
> +    } else {
> +        qemu_log_mask(LOG_UNIMP, "Unaligned access without ESR_ESS_FLAG\n");
> +    }
> +
> +    env->ear = addr;
> +    env->esr = esr;
> +    cs->exception_index = EXCP_HW_EXCP;
> +    cpu_loop_exit(cs);
> +}
> +
> +void mb_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
> +                                MMUAccessType access_type,
> +                                int mmu_idx, uintptr_t retaddr)
> +{
> +    mb_unaligned_access_internal(cs, addr, retaddr);
> +}
> +
>  #ifndef CONFIG_USER_ONLY
>  static bool mb_cpu_access_is_secure(MicroBlazeCPU *cpu,
>                                      MMUAccessType access_type)
> @@ -269,31 +305,3 @@ bool mb_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
>  }
>  
>  #endif /* !CONFIG_USER_ONLY */
> -
> -void mb_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
> -                                MMUAccessType access_type,
> -                                int mmu_idx, uintptr_t retaddr)
> -{
> -    MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
> -    uint32_t esr, iflags;
> -
> -    /* Recover the pc and iflags from the corresponding insn_start.  */
> -    cpu_restore_state(cs, retaddr);
> -    iflags = cpu->env.iflags;
> -
> -    qemu_log_mask(CPU_LOG_INT,
> -                  "Unaligned access addr=" TARGET_FMT_lx " pc=%x iflags=%x\n",
> -                  (target_ulong)addr, cpu->env.pc, iflags);
> -
> -    esr = ESR_EC_UNALIGNED_DATA;
> -    if (likely(iflags & ESR_ESS_FLAG)) {
> -        esr |= iflags & ESR_ESS_MASK;
> -    } else {
> -        qemu_log_mask(LOG_UNIMP, "Unaligned access without ESR_ESS_FLAG\n");
> -    }
> -
> -    cpu->env.ear = addr;
> -    cpu->env.esr = esr;
> -    cs->exception_index = EXCP_HW_EXCP;
> -    cpu_loop_exit(cs);
> -}
> -- 
> 2.43.0
> 


  reply	other threads:[~2025-05-25 19:32 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-25 16:02 [PATCH v2 00/10] target/microblaze: Always use TARGET_LONG_BITS == 32 Richard Henderson
2025-05-25 16:02 ` [PATCH v2 01/10] target/microblaze: Split out mb_unaligned_access_internal Richard Henderson
2025-05-25 19:26   ` Edgar E. Iglesias [this message]
2025-05-25 16:02 ` [PATCH v2 02/10] target/microblaze: Introduce helper_unaligned_access Richard Henderson
2025-05-25 19:27   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 03/10] target/microblaze: Split out mb_transaction_failed_internal Richard Henderson
2025-05-25 19:29   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 04/10] target/microblaze: Implement extended address load/store out of line Richard Henderson
2025-05-25 19:33   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 05/10] target/microblaze: Use uint64_t for CPUMBState.ear Richard Henderson
2025-05-25 19:34   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 06/10] target/microblaze: Use TCGv_i64 for compute_ldst_addr_ea Richard Henderson
2025-05-25 19:35   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 07/10] target/microblaze: Fix printf format in mmu_translate Richard Henderson
2025-05-25 19:36   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 08/10] target/microblaze: Use TARGET_LONG_BITS == 32 for system mode Richard Henderson
2025-05-25 19:36   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 09/10] target/microblaze: Drop DisasContext.r0 Richard Henderson
2025-05-25 19:38   ` Edgar E. Iglesias
2025-05-25 16:02 ` [PATCH v2 10/10] target/microblaze: Simplify compute_ldst_addr_type{a, b} Richard Henderson
2025-05-25 19:40   ` [PATCH v2 10/10] target/microblaze: Simplify compute_ldst_addr_type{a,b} Edgar E. Iglesias

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aDNu2nGrPyIc-gMC@zapote \
    --to=edgar.iglesias@amd.com \
    --cc=edgar.iglesias@gmail.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).