qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Hawkins Jiawei" <yin31149@gmail.com>,
	"Eugenio Pérez" <eperezma@redhat.com>,
	"Jason Wang" <jasowang@redhat.com>
Subject: [PULL v3 07/62] vdpa: Send cvq state load commands in parallel
Date: Sun, 22 Oct 2023 05:22:17 -0400	[thread overview]
Message-ID: <acec5f685c7ad6bd3c9bb9a57d4e509160480376.1697966402.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1697966402.git.mst@redhat.com>

From: Hawkins Jiawei <yin31149@gmail.com>

This patch enables sending CVQ state load commands
in parallel at device startup by following steps:

  * Refactor vhost_vdpa_net_load_cmd() to iterate through
the control commands shadow buffers. This allows different
CVQ state load commands to use their own unique buffers.

  * Delay the polling and checking of buffers until either
the SVQ is full or control commands shadow buffers are full.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1578
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <9350f32278e39f7bce297b8f2d82dac27c6f8c9a.1697165821.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 net/vhost-vdpa.c | 165 +++++++++++++++++++++++++++++------------------
 1 file changed, 102 insertions(+), 63 deletions(-)

diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index ef4d242811..4b7c3b81b8 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -661,6 +661,31 @@ static void vhost_vdpa_net_load_cursor_reset(VhostVDPAState *s,
     in_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len();
 }
 
+/*
+ * Poll SVQ for multiple pending control commands and check the device's ack.
+ *
+ * Caller should hold the BQL when invoking this function.
+ *
+ * @s: The VhostVDPAState
+ * @len: The length of the pending status shadow buffer
+ */
+static ssize_t vhost_vdpa_net_svq_flush(VhostVDPAState *s, size_t len)
+{
+    /* device uses a one-byte length ack for each control command */
+    ssize_t dev_written = vhost_vdpa_net_svq_poll(s, len);
+    if (unlikely(dev_written != len)) {
+        return -EIO;
+    }
+
+    /* check the device's ack */
+    for (int i = 0; i < len; ++i) {
+        if (s->status[i] != VIRTIO_NET_OK) {
+            return -EIO;
+        }
+    }
+    return 0;
+}
+
 static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
                                        struct iovec *out_cursor,
                                        struct iovec *in_cursor, uint8_t class,
@@ -671,11 +696,31 @@ static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
         .class = class,
         .cmd = cmd,
     };
-    size_t data_size = iov_size(data_sg, data_num);
+    size_t data_size = iov_size(data_sg, data_num), cmd_size;
     struct iovec out, in;
     ssize_t r;
+    unsigned dummy_cursor_iov_cnt;
+    VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
 
     assert(data_size < vhost_vdpa_net_cvq_cmd_page_len() - sizeof(ctrl));
+    cmd_size = sizeof(ctrl) + data_size;
+    if (vhost_svq_available_slots(svq) < 2 ||
+        iov_size(out_cursor, 1) < cmd_size) {
+        /*
+         * It is time to flush all pending control commands if SVQ is full
+         * or control commands shadow buffers are full.
+         *
+         * We can poll here since we've had BQL from the time
+         * we sent the descriptor.
+         */
+        r = vhost_vdpa_net_svq_flush(s, in_cursor->iov_base -
+                                     (void *)s->status);
+        if (unlikely(r < 0)) {
+            return r;
+        }
+
+        vhost_vdpa_net_load_cursor_reset(s, out_cursor, in_cursor);
+    }
 
     /* pack the CVQ command header */
     iov_from_buf(out_cursor, 1, 0, &ctrl, sizeof(ctrl));
@@ -684,7 +729,7 @@ static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
                out_cursor->iov_base + sizeof(ctrl), data_size);
 
     /* extract the required buffer from the cursor for output */
-    iov_copy(&out, 1, out_cursor, 1, 0, sizeof(ctrl) + data_size);
+    iov_copy(&out, 1, out_cursor, 1, 0, cmd_size);
     /* extract the required buffer from the cursor for input */
     iov_copy(&in, 1, in_cursor, 1, 0, sizeof(*s->status));
 
@@ -693,11 +738,13 @@ static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
         return r;
     }
 
-    /*
-     * We can poll here since we've had BQL from the time
-     * we sent the descriptor.
-     */
-    return vhost_vdpa_net_svq_poll(s, 1);
+    /* iterate the cursors */
+    dummy_cursor_iov_cnt = 1;
+    iov_discard_front(&out_cursor, &dummy_cursor_iov_cnt, cmd_size);
+    dummy_cursor_iov_cnt = 1;
+    iov_discard_front(&in_cursor, &dummy_cursor_iov_cnt, sizeof(*s->status));
+
+    return 0;
 }
 
 static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n,
@@ -709,15 +756,12 @@ static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n,
             .iov_base = (void *)n->mac,
             .iov_len = sizeof(n->mac),
         };
-        ssize_t dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                                  VIRTIO_NET_CTRL_MAC,
-                                                  VIRTIO_NET_CTRL_MAC_ADDR_SET,
-                                                  &data, 1);
-        if (unlikely(dev_written < 0)) {
-            return dev_written;
-        }
-        if (*s->status != VIRTIO_NET_OK) {
-            return -EIO;
+        ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                            VIRTIO_NET_CTRL_MAC,
+                                            VIRTIO_NET_CTRL_MAC_ADDR_SET,
+                                            &data, 1);
+        if (unlikely(r < 0)) {
+            return r;
         }
     }
 
@@ -762,15 +806,12 @@ static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n,
             .iov_len = mul_macs_size,
         },
     };
-    ssize_t dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                VIRTIO_NET_CTRL_MAC,
-                                VIRTIO_NET_CTRL_MAC_TABLE_SET,
-                                data, ARRAY_SIZE(data));
-    if (unlikely(dev_written < 0)) {
-        return dev_written;
-    }
-    if (*s->status != VIRTIO_NET_OK) {
-        return -EIO;
+    ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                        VIRTIO_NET_CTRL_MAC,
+                                        VIRTIO_NET_CTRL_MAC_TABLE_SET,
+                                        data, ARRAY_SIZE(data));
+    if (unlikely(r < 0)) {
+        return r;
     }
 
     return 0;
@@ -782,7 +823,7 @@ static int vhost_vdpa_net_load_mq(VhostVDPAState *s,
                                   struct iovec *in_cursor)
 {
     struct virtio_net_ctrl_mq mq;
-    ssize_t dev_written;
+    ssize_t r;
 
     if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_MQ)) {
         return 0;
@@ -793,15 +834,12 @@ static int vhost_vdpa_net_load_mq(VhostVDPAState *s,
         .iov_base = &mq,
         .iov_len = sizeof(mq),
     };
-    dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                          VIRTIO_NET_CTRL_MQ,
-                                          VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET,
-                                          &data, 1);
-    if (unlikely(dev_written < 0)) {
-        return dev_written;
-    }
-    if (*s->status != VIRTIO_NET_OK) {
-        return -EIO;
+    r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                VIRTIO_NET_CTRL_MQ,
+                                VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET,
+                                &data, 1);
+    if (unlikely(r < 0)) {
+        return r;
     }
 
     return 0;
@@ -813,7 +851,7 @@ static int vhost_vdpa_net_load_offloads(VhostVDPAState *s,
                                         struct iovec *in_cursor)
 {
     uint64_t offloads;
-    ssize_t dev_written;
+    ssize_t r;
 
     if (!virtio_vdev_has_feature(&n->parent_obj,
                                  VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
@@ -841,15 +879,12 @@ static int vhost_vdpa_net_load_offloads(VhostVDPAState *s,
         .iov_base = &offloads,
         .iov_len = sizeof(offloads),
     };
-    dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                          VIRTIO_NET_CTRL_GUEST_OFFLOADS,
-                                          VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET,
-                                          &data, 1);
-    if (unlikely(dev_written < 0)) {
-        return dev_written;
-    }
-    if (*s->status != VIRTIO_NET_OK) {
-        return -EIO;
+    r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                VIRTIO_NET_CTRL_GUEST_OFFLOADS,
+                                VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET,
+                                &data, 1);
+    if (unlikely(r < 0)) {
+        return r;
     }
 
     return 0;
@@ -865,16 +900,12 @@ static int vhost_vdpa_net_load_rx_mode(VhostVDPAState *s,
         .iov_base = &on,
         .iov_len = sizeof(on),
     };
-    ssize_t dev_written;
+    ssize_t r;
 
-    dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                          VIRTIO_NET_CTRL_RX,
-                                          cmd, &data, 1);
-    if (unlikely(dev_written < 0)) {
-        return dev_written;
-    }
-    if (*s->status != VIRTIO_NET_OK) {
-        return -EIO;
+    r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                VIRTIO_NET_CTRL_RX, cmd, &data, 1);
+    if (unlikely(r < 0)) {
+        return r;
     }
 
     return 0;
@@ -1031,15 +1062,12 @@ static int vhost_vdpa_net_load_single_vlan(VhostVDPAState *s,
         .iov_base = &vid,
         .iov_len = sizeof(vid),
     };
-    ssize_t dev_written = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
-                                                  VIRTIO_NET_CTRL_VLAN,
-                                                  VIRTIO_NET_CTRL_VLAN_ADD,
-                                                  &data, 1);
-    if (unlikely(dev_written < 0)) {
-        return dev_written;
-    }
-    if (unlikely(*s->status != VIRTIO_NET_OK)) {
-        return -EIO;
+    ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
+                                        VIRTIO_NET_CTRL_VLAN,
+                                        VIRTIO_NET_CTRL_VLAN_ADD,
+                                        &data, 1);
+    if (unlikely(r < 0)) {
+        return r;
     }
 
     return 0;
@@ -1106,6 +1134,17 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
         if (unlikely(r)) {
             return r;
         }
+
+        /*
+         * We need to poll and check all pending device's used buffers.
+         *
+         * We can poll here since we've had BQL from the time
+         * we sent the descriptor.
+         */
+        r = vhost_vdpa_net_svq_flush(s, in_cursor.iov_base - (void *)s->status);
+        if (unlikely(r)) {
+            return r;
+        }
     }
 
     for (int i = 0; i < v->dev->vq_index; ++i) {
-- 
MST



  parent reply	other threads:[~2023-10-22  9:22 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-22  9:21 [PULL v3 00/62] virtio,pc,pci: features, cleanups Michael S. Tsirkin
2023-10-22  9:21 ` [PULL v3 01/62] vdpa: Use iovec for vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 02/62] vdpa: Avoid using vhost_vdpa_net_load_*() outside vhost_vdpa_net_load() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 03/62] vdpa: Check device ack in vhost_vdpa_net_load_rx_mode() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 04/62] vdpa: Move vhost_svq_poll() to the caller of vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 05/62] vdpa: Introduce cursors to vhost_vdpa_net_loadx() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 06/62] vhost: Expose vhost_svq_available_slots() Michael S. Tsirkin
2023-10-22  9:22 ` Michael S. Tsirkin [this message]
2023-10-22  9:22 ` [PULL v3 08/62] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 09/62] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 10/62] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 11/62] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 12/62] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 13/62] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 14/62] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 15/62] memory: initialize 'fv' in MemoryRegionCache to make Coverity happy Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 16/62] vhost-user: do not send RESET_OWNER on device reset Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 17/62] vhost-backend: remove vhost_kernel_reset_device() Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 18/62] virtio: call ->vhost_reset_device() during reset Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 19/62] hw/i386/acpi-build: Remove build-time assertion on PIIX/ICH9 reset registers being identical Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 20/62] timer/i8254: Fix one shot PIT mode Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 21/62] hw/display: fix memleak from virtio_add_resource Michael S. Tsirkin
2023-10-24  6:19   ` Michael Tokarev
2023-10-22  9:23 ` [PULL v3 22/62] hw/i386/pc: Merge two if statements into one Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 23/62] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 24/62] hw/i386/pc_piix: Assign PIIX3's ISA interrupts before its realize() Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 25/62] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 26/62] hw/i386/pc_piix: Wire PIIX3's ISA interrupts by new "isa-irqs" property Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 27/62] hw/i386/pc_piix: Remove redundant "piix3" variable Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 28/62] hw/isa/piix3: Rename "pic" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 29/62] hw/i386/pc_q35: Wire ICH9 LPC function's interrupts before its realize() Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 30/62] hw/isa/piix3: Wire PIC IRQs to ISA bus in host device Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 31/62] hw/i386/pc: Wire RTC ISA IRQs in south bridges Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 32/62] hw/isa/piix3: Create IDE controller in host device Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 33/62] hw/isa/piix3: Create USB " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 34/62] hw/isa/piix3: Create power management " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 35/62] hw/isa/piix3: Drop the "3" from PIIX base class name Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 36/62] hw/isa/piix4: Remove unused inbound ISA interrupt lines Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 37/62] hw/isa/piix4: Rename "isa" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 38/62] hw/isa/piix4: Rename reset control operations to match PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 39/62] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 40/62] hw/isa/piix3: Merge hw/isa/piix4.c Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 41/62] hw/isa/piix: Allow for optional PIC creation in PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 42/62] hw/isa/piix: Allow for optional PIT " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 43/62] hw/isa/piix: Harmonize names of reset control memory regions Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 44/62] hw/isa/piix: Share PIIX3's base class with PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 45/62] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 46/62] hw/isa/piix: Rename functions to be shared for PCI interrupt triggering Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 47/62] hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 48/62] hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 49/62] hw/isa/piix: Implement multi-process QEMU support also for PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 50/62] hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 51/62] vhost-user-common: send get_inflight_fd once Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 52/62] vhost: move and rename the conn retry times Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 53/62] vhost-user-scsi: support reconnect to backend Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 54/62] vhost-user-scsi: start vhost when guest kicks Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 55/62] vhost-user: fix lost reconnect Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 56/62] hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 57/62] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 58/62] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 59/62] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 60/62] vhost-user: Fix protocol feature bit conflict Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 61/62] MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 62/62] intel-iommu: Report interrupt remapping faults, fix return value Michael S. Tsirkin
2023-10-24  1:15 ` [PULL v3 00/62] virtio,pc,pci: features, cleanups Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=acec5f685c7ad6bd3c9bb9a57d4e509160480376.1697966402.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=eperezma@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=yin31149@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).