From: Stefan Berger <stefanb@linux.ibm.com>
To: Liam Merwick <liam.merwick@oracle.com>, qemu-devel@nongnu.org
Cc: philmd@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3 3/3] tpm_tis: convert tpm_tis_show_buffer() to use trace event
Date: Tue, 12 Feb 2019 16:01:13 -0500 [thread overview]
Message-ID: <ae83288a-2d71-b67e-938a-99faf9d7f185@linux.ibm.com> (raw)
In-Reply-To: <1550004500-24485-3-git-send-email-liam.merwick@oracle.com>
On 2/12/19 3:48 PM, Liam Merwick wrote:
> cppcheck reports:
>
> [hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int'
>
> Rather than just converting the format specifier to use '%u", the
> tpm_tis_show_buffer() function is converted to use trace points and
> the two debug callers use the trace event infrastructure so that it's
> available in production cases also and not just when DEBUG_TIS is enabled.
>
> Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
> ---
>
> Sample trace output
>
> % echo tpm_tis_show_buffer > /tmp/events
> % export QTEST_QEMU_BINARY="/home/Development/qemu-upstream/x86_64-softmmu/qemu-system-x86_64 --trace events=/tmp/events"
> % tests/tpm-tis-test
> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_localities: OK
> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg: OK
> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_seize: OK
> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_release: OK
> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_transmit: OK
> % ./scripts/simpletrace.py trace-events-all trace-30665
> tpm_tis_show_buffer 0.000 pid=30665 string=tpm_tis: To TPM len=0xc line=80 01 00 00 00 0C 00 00 01 44 00 00
> tpm_tis_show_buffer 256.581 pid=30665 string=tpm_tis: From TPM len=0xa line=80 01 00 00 00 0A 00 00 01 01
should now be 'length=10' and then a new line with just the bytes?
>
> hw/tpm/tpm_tis.c | 25 +++++++++++++++++--------
> hw/tpm/trace-events | 1 +
> 2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
> index 772431f20874..18e19d5f900d 100644
> --- a/hw/tpm/tpm_tis.c
> +++ b/hw/tpm/tpm_tis.c
> @@ -108,17 +108,26 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr addr)
> static void tpm_tis_show_buffer(const unsigned char *buffer,
> size_t buffer_size, const char *string)
> {
> - uint32_t len, i;
> + size_t len, i;
> + char *line_buffer, *p;
>
> len = MIN(tpm_cmd_get_size(buffer), buffer_size);
> - printf("tpm_tis: %s length = %d\n", string, len);
> - for (i = 0; i < len; i++) {
> +
> + /*
> + * allocate enough room for 3 chars per buffer entry plus
> + * a newline after every 16 chars.
This is missing the terminating null byte.
> + */
> + line_buffer = g_malloc(len * 3 + (len / 16));
> +
> + for (i = 0, p = line_buffer; i < len; i++) {
> if (i && !(i % 16)) {
> - printf("\n");
> + p += sprintf(p, "\n");
> }
> - printf("%.2X ", buffer[i]);
> + p += sprintf(p, "%.2X ", buffer[i]);
> }
> - printf("\n");
> + trace_tpm_tis_show_buffer(string, len, line_buffer);
> +
> + g_free(line_buffer);
> }
>
> /*
> @@ -145,7 +154,7 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags)
> */
> static void tpm_tis_tpm_send(TPMState *s, uint8_t locty)
> {
> - if (DEBUG_TIS) {
> + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
> tpm_tis_show_buffer(s->buffer, s->be_buffer_size,
> "tpm_tis: To TPM");
> }
> @@ -315,7 +324,7 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret)
> s->loc[locty].state = TPM_TIS_STATE_COMPLETION;
> s->rw_offset = 0;
>
> - if (DEBUG_TIS) {
> + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
> tpm_tis_show_buffer(s->buffer, s->be_buffer_size,
> "tpm_tis: From TPM");
> }
> diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events
> index 920d32ad5514..c0267d075027 100644
> --- a/hw/tpm/trace-events
> +++ b/hw/tpm/trace-events
> @@ -36,6 +36,7 @@ tpm_emulator_pre_save(void) ""
> tpm_emulator_inst_init(void) ""
>
> # hw/tpm/tpm_tis.c
> +tpm_tis_show_buffer(const char *string, size_t len, const char *line) "tpm_tis: %s length = %zu\n%s"
> tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x"
> tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d"
> tpm_tis_abort(uint8_t locty) "New active locality is %d"
next prev parent reply other threads:[~2019-02-12 21:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 20:48 [Qemu-devel] [PATCH v3 1/3] tpm_tis: fix loop that cancels any seizure by a lower locality Liam Merwick
2019-02-12 20:48 ` [Qemu-devel] [PATCH v3 2/3] tpm_tis: assert valid addr passed to tpm_tis_locality_from_addr() Liam Merwick
2019-02-12 20:48 ` [Qemu-devel] [PATCH v3 3/3] tpm_tis: convert tpm_tis_show_buffer() to use trace event Liam Merwick
2019-02-12 21:01 ` Stefan Berger [this message]
2019-02-13 10:46 ` Liam Merwick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae83288a-2d71-b67e-938a-99faf9d7f185@linux.ibm.com \
--to=stefanb@linux.ibm.com \
--cc=liam.merwick@oracle.com \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).