From: Chao Liu <chao.liu@processmission.com>
To: Kangjie Huang <flamboyant.h.01@gmail.com>
Cc: qemu-devel@nongnu.org, qemu-riscv@nongnu.org,
Alistair Francis <alistair.francis@wdc.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Weiwei Li <liwei1518@gmail.com>,
Daniel Henrique Barboza <daniel.barboza@oss.qualcomm.com>,
Liu Zhiwei <zhiwei_liu@linux.alibaba.com>,
Pierrick Bouvier <pierrick.bouvier@oss.qualcomm.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Fabiano Rosas <farosas@suse.de>,
Laurent Vivier <lvivier@redhat.com>
Subject: Re: [PATCH v2 2/3] hw/riscv/k230: wire up the IOMUX device
Date: Fri, 17 Jul 2026 21:45:29 +0800 [thread overview]
Message-ID: <alox45BlNTiMoGMA@ChaodeMacBook-Pro.local> (raw)
In-Reply-To: <43e4eb64d1c29419d5803e42ad692324bde2b6c7.1784022244.git.flamboyant.h.01@gmail.com>
On Tue, Jul 14, 2026 at 06:22:01PM +0800, Kangjie Huang wrote:
> Instantiate the K230 IOMUX device and map its MMIO region at
> 0x91105000, replacing the unimplemented device covering the same SoC
> address window.
>
> Select the model from the K230 machine configuration and document the
> newly modeled device.
>
> Signed-off-by: Kangjie Huang <flamboyant.h.01@gmail.com>
Suggested-by: Chao Liu <chao.liu@processmission.com>
Thanks,
Chao
> ---
> docs/system/riscv/k230.rst | 1 +
> hw/riscv/Kconfig | 1 +
> hw/riscv/k230.c | 11 ++++++++---
> include/hw/riscv/k230.h | 2 ++
> 4 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/docs/system/riscv/k230.rst b/docs/system/riscv/k230.rst
> index cea8202e55..b160c401fd 100644
> --- a/docs/system/riscv/k230.rst
> +++ b/docs/system/riscv/k230.rst
> @@ -20,6 +20,7 @@ The ``k230`` machine supports the following devices:
> * Platform-Level Interrupt Controller (PLIC)
> * 2 K230 Watchdog Timer
> * 5 UART
> +* K230 IOMUX register block
>
> Boot options
> ------------
> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> index de37c08cae..4c9fc3e7ad 100644
> --- a/hw/riscv/Kconfig
> +++ b/hw/riscv/Kconfig
> @@ -162,3 +162,4 @@ config K230
> select SERIAL_MM
> select UNIMP
> select K230_WDT
> + select K230_IOMUX
> diff --git a/hw/riscv/k230.c b/hw/riscv/k230.c
> index 656f28190c..430c1646b5 100644
> --- a/hw/riscv/k230.c
> +++ b/hw/riscv/k230.c
> @@ -110,6 +110,7 @@ static void k230_soc_init(Object *obj)
> object_initialize_child(obj, "c908-cpu", cpu0, TYPE_RISCV_HART_ARRAY);
> object_initialize_child(obj, "k230-wdt0", &s->wdt[0], TYPE_K230_WDT);
> object_initialize_child(obj, "k230-wdt1", &s->wdt[1], TYPE_K230_WDT);
> + object_initialize_child(obj, "k230-iomux", &s->iomux, TYPE_K230_IOMUX);
>
> qdev_prop_set_uint32(DEVICE(cpu0), "hartid-base", 0);
> qdev_prop_set_string(DEVICE(cpu0), "cpu-type", TYPE_RISCV_CPU_THEAD_C908);
> @@ -198,6 +199,11 @@ static void k230_soc_realize(DeviceState *dev, Error **errp)
> }
> }
>
> + /* IOMUX */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->iomux), errp)) {
> + return;
> + }
> +
> sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[0]), 0, memmap[K230_DEV_WDT0].base);
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[0]), 0,
> qdev_get_gpio_in(DEVICE(s->c908_plic), K230_WDT0_IRQ));
> @@ -206,6 +212,8 @@ static void k230_soc_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[1]), 0,
> qdev_get_gpio_in(DEVICE(s->c908_plic), K230_WDT1_IRQ));
>
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->iomux), 0, memmap[K230_DEV_IOMUX].base);
> +
> /* unimplemented devices */
> create_unimplemented_device("kpu.l2-cache",
> memmap[K230_DEV_KPU_L2_CACHE].base,
> @@ -280,9 +288,6 @@ static void k230_soc_realize(DeviceState *dev, Error **errp)
> create_unimplemented_device("ipcm", memmap[K230_DEV_MAILBOX].base,
> memmap[K230_DEV_MAILBOX].size);
>
> - create_unimplemented_device("iomux", memmap[K230_DEV_IOMUX].base,
> - memmap[K230_DEV_IOMUX].size);
> -
> create_unimplemented_device("timer", memmap[K230_DEV_TIMER].base,
> memmap[K230_DEV_TIMER].size);
>
> diff --git a/include/hw/riscv/k230.h b/include/hw/riscv/k230.h
> index 592e1c26bf..223e76b420 100644
> --- a/include/hw/riscv/k230.h
> +++ b/include/hw/riscv/k230.h
> @@ -18,6 +18,7 @@
> #include "hw/core/boards.h"
> #include "hw/riscv/riscv_hart.h"
> #include "hw/watchdog/k230_wdt.h"
> +#include "hw/misc/k230_iomux.h"
>
> #define C908_CPU_HARTID (0)
>
> @@ -33,6 +34,7 @@ typedef struct K230SoCState {
> RISCVHartArrayState c908_cpu; /* Small core */
>
> K230WdtState wdt[2];
> + K230IomuxState iomux;
> MemoryRegion sram;
> MemoryRegion bootrom;
>
> --
> 2.43.0
>
next prev parent reply other threads:[~2026-07-17 13:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 10:21 [PATCH v2 0/3] hw/riscv/k230: add IOMUX register block model Kangjie Huang
2026-07-14 10:22 ` [PATCH v2 1/3] hw/misc/k230_iomux: add Kendryte K230 IOMUX model Kangjie Huang
2026-07-17 13:44 ` Chao Liu
2026-07-14 10:22 ` [PATCH v2 2/3] hw/riscv/k230: wire up the IOMUX device Kangjie Huang
2026-07-17 13:45 ` Chao Liu [this message]
2026-07-14 10:22 ` [PATCH v2 3/3] tests/qtest: add test for K230 IOMUX Kangjie Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alox45BlNTiMoGMA@ChaodeMacBook-Pro.local \
--to=chao.liu@processmission.com \
--cc=alistair.francis@wdc.com \
--cc=daniel.barboza@oss.qualcomm.com \
--cc=farosas@suse.de \
--cc=flamboyant.h.01@gmail.com \
--cc=liwei1518@gmail.com \
--cc=lvivier@redhat.com \
--cc=palmer@dabbelt.com \
--cc=pbonzini@redhat.com \
--cc=pierrick.bouvier@oss.qualcomm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox