From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: Shivaprasad G Bhat <sbhat@linux.ibm.com>, david@gibson.dropbear.id.au
Cc: clg@kaod.org, groug@kaod.org, harshpb@linux.ibm.com,
npiggin@gmail.com, pbonzini@redhat.com, qemu-ppc@nongnu.org,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
ravi.bangoria@amd.com
Subject: Re: [PATCH v6] ppc: Enable 2nd DAWR support on p10
Date: Fri, 7 Jul 2023 08:09:47 -0300 [thread overview]
Message-ID: <b0047746-5b36-c39b-c669-055d08ca3164@gmail.com> (raw)
In-Reply-To: <168871963321.58984.15628382614621248470.stgit@ltcd89-lp2>
This one was a buzzer shot.
Queued in gitlab.com/danielhb/qemu/tree/ppc-next. Thanks,
Daniel
On 7/7/23 05:47, Shivaprasad G Bhat wrote:
> From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
>
> As per the PAPR, bit 0 of byte 64 in pa-features property
> indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
> DAWR is present, otherwise not. Use KVM_CAP_PPC_DAWR1 capability to find
> whether kvm supports 2nd DAWR or not. If it's supported, allow user to set
> the pa-feature bit in guest DT using cap-dawr1 machine capability. Though,
> watchpoint on powerpc TCG guest is not supported and thus 2nd DAWR is not
> enabled for TCG mode.
>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
> Reviewed-by: Greg Kurz <groug@kaod.org>
> Reviewed-by: Cédric Le Goater <clg@kaod.org>
> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
> ---
> Changelog:
> v5: https://lore.kernel.org/all/20210412114433.129702-1-ravi.bangoria@linux.ibm.com/
> v5->v6:
> - The other patches in the original series already merged.
> - Rebased to the top of the tree. So, the gen_spr_book3s_310_dbg() is renamed
> to register_book3s_310_dbg_sprs() and moved to cpu_init.c accordingly.
> - No functional changes.
>
> v4: https://lore.kernel.org/r/20210406053833.282907-1-ravi.bangoria@linux.ibm.com
> v3->v4:
> - Make error message more proper.
>
> v3: https://lore.kernel.org/r/20210330095350.36309-1-ravi.bangoria@linux.ibm.com
> v3->v4:
> - spapr_dt_pa_features(): POWER10 processor is compatible with 3.0
> (PCR_COMPAT_3_00). No need to ppc_check_compat(3_10) for now as
> ppc_check_compati(3_00) will also be true. ppc_check_compat(3_10)
> can be added while introducing pa_features_310 in future.
> - Use error_append_hint() for hints. Also add ERRP_GUARD().
> - Add kvmppc_set_cap_dawr1() stub function for CONFIG_KVM=n.
>
> v2: https://lore.kernel.org/r/20210329041906.213991-1-ravi.bangoria@linux.ibm.com
> v2->v3:
> - Don't introduce pa_features_310[], instead, reuse pa_features_300[]
> for 3.1 guests, as there is no difference between initial values of
> them atm.
> - Call gen_spr_book3s_310_dbg() from init_proc_POWER10() instead of
> init_proc_POWER8(). Also, Don't call gen_spr_book3s_207_dbg() from
> gen_spr_book3s_310_dbg() as init_proc_POWER10() already calls it.
>
> v1: https://lore.kernel.org/r/20200723104220.314671-1-ravi.bangoria@linux.ibm.com
> v1->v2:
> - Introduce machine capability cap-dawr1 to enable/disable
> the feature. By default, 2nd DAWR is OFF for guests even
> when host kvm supports it. User has to manually enable it
> with -machine cap-dawr1=on if he wishes to use it.
> - Split the header file changes into separate patch. (Sync
> headers from v5.12-rc3)
>
> [1] https://git.kernel.org/torvalds/c/bd1de1a0e6eff
>
> hw/ppc/spapr.c | 7 ++++++-
> hw/ppc/spapr_caps.c | 32 ++++++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 6 +++++-
> target/ppc/cpu.h | 2 ++
> target/ppc/cpu_init.c | 15 +++++++++++++++
> target/ppc/kvm.c | 12 ++++++++++++
> target/ppc/kvm_ppc.h | 12 ++++++++++++
> 7 files changed, 84 insertions(+), 2 deletions(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 54dbfd7fe9..1e54e0c719 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -241,7 +241,7 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,
> 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, /* 48 - 53 */
> /* 54: DecFP, 56: DecI, 58: SHA */
> 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, /* 54 - 59 */
> - /* 60: NM atomic, 62: RNG */
> + /* 60: NM atomic, 62: RNG, 64: DAWR1 (ISA 3.1) */
> 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* 60 - 65 */
> };
> uint8_t *pa_features = NULL;
> @@ -282,6 +282,9 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,
> * in pa-features. So hide it from them. */
> pa_features[40 + 2] &= ~0x80; /* Radix MMU */
> }
> + if (spapr_get_cap(spapr, SPAPR_CAP_DAWR1)) {
> + pa_features[66] |= 0x80;
> + }
>
> _FDT((fdt_setprop(fdt, offset, "ibm,pa-features", pa_features, pa_size)));
> }
> @@ -2084,6 +2087,7 @@ static const VMStateDescription vmstate_spapr = {
> &vmstate_spapr_cap_fwnmi,
> &vmstate_spapr_fwnmi,
> &vmstate_spapr_cap_rpt_invalidate,
> + &vmstate_spapr_cap_dawr1,
> NULL
> }
> };
> @@ -4683,6 +4687,7 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data)
> smc->default_caps.caps[SPAPR_CAP_CCF_ASSIST] = SPAPR_CAP_ON;
> smc->default_caps.caps[SPAPR_CAP_FWNMI] = SPAPR_CAP_ON;
> smc->default_caps.caps[SPAPR_CAP_RPT_INVALIDATE] = SPAPR_CAP_OFF;
> + smc->default_caps.caps[SPAPR_CAP_DAWR1] = SPAPR_CAP_OFF;
>
> /*
> * This cap specifies whether the AIL 3 mode for
> diff --git a/hw/ppc/spapr_caps.c b/hw/ppc/spapr_caps.c
> index 5a0755d34f..2f2cf4a250 100644
> --- a/hw/ppc/spapr_caps.c
> +++ b/hw/ppc/spapr_caps.c
> @@ -655,6 +655,28 @@ static void cap_ail_mode_3_apply(SpaprMachineState *spapr,
> }
> }
>
> +static void cap_dawr1_apply(SpaprMachineState *spapr, uint8_t val,
> + Error **errp)
> +{
> + ERRP_GUARD();
> + if (!val) {
> + return; /* Disable by default */
> + }
> +
> + if (tcg_enabled()) {
> + error_setg(errp, "DAWR1 not supported in TCG.");
> + error_append_hint(errp, "Try appending -machine cap-dawr1=off\n");
> + } else if (kvm_enabled()) {
> + if (!kvmppc_has_cap_dawr1()) {
> + error_setg(errp, "DAWR1 not supported by KVM.");
> + error_append_hint(errp, "Try appending -machine cap-dawr1=off\n");
> + } else if (kvmppc_set_cap_dawr1(val) < 0) {
> + error_setg(errp, "Error enabling cap-dawr1 with KVM.");
> + error_append_hint(errp, "Try appending -machine cap-dawr1=off\n");
> + }
> + }
> +}
> +
> SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = {
> [SPAPR_CAP_HTM] = {
> .name = "htm",
> @@ -781,6 +803,15 @@ SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = {
> .type = "bool",
> .apply = cap_ail_mode_3_apply,
> },
> + [SPAPR_CAP_DAWR1] = {
> + .name = "dawr1",
> + .description = "Allow 2nd Data Address Watchpoint Register (DAWR1)",
> + .index = SPAPR_CAP_DAWR1,
> + .get = spapr_cap_get_bool,
> + .set = spapr_cap_set_bool,
> + .type = "bool",
> + .apply = cap_dawr1_apply,
> + },
> };
>
> static SpaprCapabilities default_caps_with_cpu(SpaprMachineState *spapr,
> @@ -923,6 +954,7 @@ SPAPR_CAP_MIG_STATE(large_decr, SPAPR_CAP_LARGE_DECREMENTER);
> SPAPR_CAP_MIG_STATE(ccf_assist, SPAPR_CAP_CCF_ASSIST);
> SPAPR_CAP_MIG_STATE(fwnmi, SPAPR_CAP_FWNMI);
> SPAPR_CAP_MIG_STATE(rpt_invalidate, SPAPR_CAP_RPT_INVALIDATE);
> +SPAPR_CAP_MIG_STATE(dawr1, SPAPR_CAP_DAWR1);
>
> void spapr_caps_init(SpaprMachineState *spapr)
> {
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index 538b2dfb89..47fffb921a 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -80,8 +80,10 @@ typedef enum {
> #define SPAPR_CAP_RPT_INVALIDATE 0x0B
> /* Support for AIL modes */
> #define SPAPR_CAP_AIL_MODE_3 0x0C
> +/* DAWR1 */
> +#define SPAPR_CAP_DAWR1 0x0D
> /* Num Caps */
> -#define SPAPR_CAP_NUM (SPAPR_CAP_AIL_MODE_3 + 1)
> +#define SPAPR_CAP_NUM (SPAPR_CAP_DAWR1 + 1)
>
> /*
> * Capability Values
> @@ -407,6 +409,7 @@ struct SpaprMachineState {
> #define H_SET_MODE_RESOURCE_SET_DAWR0 2
> #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
> #define H_SET_MODE_RESOURCE_LE 4
> +#define H_SET_MODE_RESOURCE_SET_DAWR1 5
>
> /* Flags for H_SET_MODE_RESOURCE_LE */
> #define H_SET_MODE_ENDIAN_BIG 0
> @@ -990,6 +993,7 @@ extern const VMStateDescription vmstate_spapr_cap_ccf_assist;
> extern const VMStateDescription vmstate_spapr_cap_fwnmi;
> extern const VMStateDescription vmstate_spapr_cap_rpt_invalidate;
> extern const VMStateDescription vmstate_spapr_wdt;
> +extern const VMStateDescription vmstate_spapr_cap_dawr1;
>
> static inline uint8_t spapr_get_cap(SpaprMachineState *spapr, int cap)
> {
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index af12c93ebc..64855935f7 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -1588,9 +1588,11 @@ void ppc_compat_add_property(Object *obj, const char *name,
> #define SPR_PSPB (0x09F)
> #define SPR_DPDES (0x0B0)
> #define SPR_DAWR0 (0x0B4)
> +#define SPR_DAWR1 (0x0B5)
> #define SPR_RPR (0x0BA)
> #define SPR_CIABR (0x0BB)
> #define SPR_DAWRX0 (0x0BC)
> +#define SPR_DAWRX1 (0x0BD)
> #define SPR_HFSCR (0x0BE)
> #define SPR_VRSAVE (0x100)
> #define SPR_USPRG0 (0x100)
> diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
> index aeff71d063..c688e52928 100644
> --- a/target/ppc/cpu_init.c
> +++ b/target/ppc/cpu_init.c
> @@ -5131,6 +5131,20 @@ static void register_book3s_207_dbg_sprs(CPUPPCState *env)
> KVM_REG_PPC_CIABR, 0x00000000);
> }
>
> +static void register_book3s_310_dbg_sprs(CPUPPCState *env)
> +{
> + spr_register_kvm_hv(env, SPR_DAWR1, "DAWR1",
> + SPR_NOACCESS, SPR_NOACCESS,
> + SPR_NOACCESS, SPR_NOACCESS,
> + &spr_read_generic, &spr_write_generic,
> + KVM_REG_PPC_DAWR1, 0x00000000);
> + spr_register_kvm_hv(env, SPR_DAWRX1, "DAWRX1",
> + SPR_NOACCESS, SPR_NOACCESS,
> + SPR_NOACCESS, SPR_NOACCESS,
> + &spr_read_generic, &spr_write_generic32,
> + KVM_REG_PPC_DAWRX1, 0x00000000);
> +}
> +
> static void register_970_dbg_sprs(CPUPPCState *env)
> {
> /* Breakpoints */
> @@ -6435,6 +6449,7 @@ static void init_proc_POWER10(CPUPPCState *env)
> /* Common Registers */
> init_proc_book3s_common(env);
> register_book3s_207_dbg_sprs(env);
> + register_book3s_310_dbg_sprs(env);
>
> /* Common TCG PMU */
> init_tcg_pmu_power8(env);
> diff --git a/target/ppc/kvm.c b/target/ppc/kvm.c
> index a8a935e267..05f68d2d91 100644
> --- a/target/ppc/kvm.c
> +++ b/target/ppc/kvm.c
> @@ -89,6 +89,7 @@ static int cap_large_decr;
> static int cap_fwnmi;
> static int cap_rpt_invalidate;
> static int cap_ail_mode_3;
> +static int cap_dawr1;
>
> static uint32_t debug_inst_opcode;
>
> @@ -138,6 +139,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
> cap_ppc_nested_kvm_hv = kvm_vm_check_extension(s, KVM_CAP_PPC_NESTED_HV);
> cap_large_decr = kvmppc_get_dec_bits();
> cap_fwnmi = kvm_vm_check_extension(s, KVM_CAP_PPC_FWNMI);
> + cap_dawr1 = kvm_vm_check_extension(s, KVM_CAP_PPC_DAWR1);
> /*
> * Note: setting it to false because there is not such capability
> * in KVM at this moment.
> @@ -2109,6 +2111,16 @@ int kvmppc_set_fwnmi(PowerPCCPU *cpu)
> return kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_FWNMI, 0);
> }
>
> +bool kvmppc_has_cap_dawr1(void)
> +{
> + return !!cap_dawr1;
> +}
> +
> +int kvmppc_set_cap_dawr1(int enable)
> +{
> + return kvm_vm_enable_cap(kvm_state, KVM_CAP_PPC_DAWR1, 0, enable);
> +}
> +
> int kvmppc_smt_threads(void)
> {
> return cap_ppc_smt ? cap_ppc_smt : 1;
> diff --git a/target/ppc/kvm_ppc.h b/target/ppc/kvm_ppc.h
> index 611debc3ce..584916a6d1 100644
> --- a/target/ppc/kvm_ppc.h
> +++ b/target/ppc/kvm_ppc.h
> @@ -67,6 +67,8 @@ bool kvmppc_has_cap_htm(void);
> bool kvmppc_has_cap_mmu_radix(void);
> bool kvmppc_has_cap_mmu_hash_v3(void);
> bool kvmppc_has_cap_xive(void);
> +bool kvmppc_has_cap_dawr1(void);
> +int kvmppc_set_cap_dawr1(int enable);
> int kvmppc_get_cap_safe_cache(void);
> int kvmppc_get_cap_safe_bounds_check(void);
> int kvmppc_get_cap_safe_indirect_branch(void);
> @@ -352,6 +354,16 @@ static inline bool kvmppc_has_cap_xive(void)
> return false;
> }
>
> +static inline bool kvmppc_has_cap_dawr1(void)
> +{
> + return false;
> +}
> +
> +static inline int kvmppc_set_cap_dawr1(int enable)
> +{
> + abort();
> +}
> +
> static inline int kvmppc_get_cap_safe_cache(void)
> {
> return 0;
>
>
next prev parent reply other threads:[~2023-07-07 11:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 8:47 [PATCH v6] ppc: Enable 2nd DAWR support on p10 Shivaprasad G Bhat
2023-07-07 11:09 ` Daniel Henrique Barboza [this message]
2023-07-07 11:59 ` Greg Kurz
2023-07-07 12:22 ` Daniel Henrique Barboza
2023-07-07 16:01 ` Shivaprasad G Bhat
2023-07-08 6:25 ` Greg Kurz
2023-07-07 14:24 ` Cédric Le Goater
2023-07-07 14:49 ` Daniel Henrique Barboza
2023-07-07 16:10 ` Shivaprasad G Bhat
2023-07-08 1:24 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b0047746-5b36-c39b-c669-055d08ca3164@gmail.com \
--to=danielhb413@gmail.com \
--cc=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=groug@kaod.org \
--cc=harshpb@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=npiggin@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=ravi.bangoria@amd.com \
--cc=sbhat@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).