From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Eugenio Pérez" <eperezma@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Lei Yang" <leiyang@redhat.com>
Subject: [PULL 18/63] vdpa: move vhost_vdpa_set_vring_ready to the caller
Date: Wed, 4 Oct 2023 04:44:04 -0400 [thread overview]
Message-ID: <b24272731cfab1e58d5c49c49419045d277f93e9.1696408966.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1696408966.git.mst@redhat.com>
From: Eugenio Pérez <eperezma@redhat.com>
Doing that way allows CVQ to be enabled before the dataplane vqs,
restoring the state as MQ or MAC addresses properly in the case of a
migration.
The patch does it by defining a ->load NetClientInfo callback also for
dataplane. Ideally, this should be done by an independent patch, but
the function is already static so it would only add an empty
vhost_vdpa_net_data_load stub.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230822085330.3978829-5-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vdpa-dev.c | 3 ++
hw/virtio/vhost-vdpa.c | 3 --
net/vhost-vdpa.c | 65 ++++++++++++++++++++++++++++--------------
3 files changed, 46 insertions(+), 25 deletions(-)
diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
index 363b625243..f22d5d5bc0 100644
--- a/hw/virtio/vdpa-dev.c
+++ b/hw/virtio/vdpa-dev.c
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
error_setg_errno(errp, -ret, "Error starting vhost");
goto err_guest_notifiers;
}
+ for (i = 0; i < s->dev.nvqs; ++i) {
+ vhost_vdpa_set_vring_ready(&s->vdpa, i);
+ }
s->started = true;
/*
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index e7de880d51..89ff02a999 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -1303,9 +1303,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
if (unlikely(!ok)) {
return -1;
}
- for (int i = 0; i < dev->nvqs; ++i) {
- vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
- }
} else {
vhost_vdpa_suspend(dev);
vhost_vdpa_svqs_stop(dev);
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 008c0cf8b3..0715bed8e6 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -375,6 +375,22 @@ static int vhost_vdpa_net_data_start(NetClientState *nc)
return 0;
}
+static int vhost_vdpa_net_data_load(NetClientState *nc)
+{
+ VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+ struct vhost_vdpa *v = &s->vhost_vdpa;
+ bool has_cvq = v->dev->vq_index_end % 2;
+
+ if (has_cvq) {
+ return 0;
+ }
+
+ for (int i = 0; i < v->dev->nvqs; ++i) {
+ vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+ }
+ return 0;
+}
+
static void vhost_vdpa_net_client_stop(NetClientState *nc)
{
VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
@@ -397,6 +413,7 @@ static NetClientInfo net_vhost_vdpa_info = {
.size = sizeof(VhostVDPAState),
.receive = vhost_vdpa_receive,
.start = vhost_vdpa_net_data_start,
+ .load = vhost_vdpa_net_data_load,
.stop = vhost_vdpa_net_client_stop,
.cleanup = vhost_vdpa_cleanup,
.has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
@@ -1022,30 +1039,34 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
- if (!v->shadow_vqs_enabled) {
- return 0;
+ vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
+
+ if (v->shadow_vqs_enabled) {
+ n = VIRTIO_NET(v->dev->vdev);
+ r = vhost_vdpa_net_load_mac(s, n);
+ if (unlikely(r < 0)) {
+ return r;
+ }
+ r = vhost_vdpa_net_load_mq(s, n);
+ if (unlikely(r)) {
+ return r;
+ }
+ r = vhost_vdpa_net_load_offloads(s, n);
+ if (unlikely(r)) {
+ return r;
+ }
+ r = vhost_vdpa_net_load_rx(s, n);
+ if (unlikely(r)) {
+ return r;
+ }
+ r = vhost_vdpa_net_load_vlan(s, n);
+ if (unlikely(r)) {
+ return r;
+ }
}
- n = VIRTIO_NET(v->dev->vdev);
- r = vhost_vdpa_net_load_mac(s, n);
- if (unlikely(r < 0)) {
- return r;
- }
- r = vhost_vdpa_net_load_mq(s, n);
- if (unlikely(r)) {
- return r;
- }
- r = vhost_vdpa_net_load_offloads(s, n);
- if (unlikely(r)) {
- return r;
- }
- r = vhost_vdpa_net_load_rx(s, n);
- if (unlikely(r)) {
- return r;
- }
- r = vhost_vdpa_net_load_vlan(s, n);
- if (unlikely(r)) {
- return r;
+ for (int i = 0; i < v->dev->vq_index; ++i) {
+ vhost_vdpa_set_vring_ready(v, i);
}
return 0;
--
MST
next prev parent reply other threads:[~2023-10-04 9:07 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 8:43 [PULL 00/63] virtio,pci: features, cleanups Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 01/63] pci: SLT must be RO Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 02/63] hw/virtio: Propagate page_mask to vhost_vdpa_listener_skipped_section() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 03/63] hw/virtio: Propagate page_mask to vhost_vdpa_section_end() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 04/63] hw/virtio/vhost-vdpa: Inline TARGET_PAGE_ALIGN() macro Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 05/63] hw/virtio/vhost-vdpa: Use target-agnostic qemu_target_page_mask() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 06/63] hw/virtio: Build vhost-vdpa.o once Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 07/63] hw/virtio/meson: Rename softmmu_virtio_ss[] -> system_virtio_ss[] Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 08/63] virtio: add vhost-user-base and a generic vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 09/63] hw/virtio: add config support to vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 10/63] virtio-net: do not reset vlan filtering at set_features Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 11/63] virtio-net: Expose MAX_VLAN Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 12/63] vdpa: Restore vlan filtering state Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 13/63] vdpa: Allow VIRTIO_NET_F_CTRL_VLAN in SVQ Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 14/63] virtio: don't zero out memory region cache for indirect descriptors Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 15/63] vdpa: use first queue SVQ state for CVQ default Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 16/63] vdpa: export vhost_vdpa_set_vring_ready Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 17/63] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load Michael S. Tsirkin
2023-10-04 8:44 ` Michael S. Tsirkin [this message]
2023-10-04 8:44 ` [PULL 19/63] vdpa: remove net cvq migration blocker Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 20/63] vhost: Add count argument to vhost_svq_poll() Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 21/63] qmp: remove virtio_list, search QOM tree instead Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 22/63] qmp: update virtio feature maps, vhost-user-gpio introspection Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 23/63] vhost-user: move VhostUserProtocolFeature definition to header file Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 24/63] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 25/63] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 26/63] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 27/63] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 28/63] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 29/63] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 30/63] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-04 10:11 ` Laszlo Ersek
2023-10-04 12:53 ` Michael S. Tsirkin
2023-10-04 13:28 ` Laszlo Ersek
2023-10-04 8:44 ` [PULL 31/63] hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routing Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 32/63] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 33/63] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-04 17:46 ` Thomas Huth
2023-10-04 22:14 ` Michael S. Tsirkin
2023-10-04 23:09 ` [PATCH v3] " Dave Jiang
2023-10-05 3:36 ` Michael S. Tsirkin
2023-10-05 16:11 ` Dave Jiang
2023-10-05 16:32 ` Michael S. Tsirkin
2023-10-06 12:09 ` Jonathan Cameron via
2023-10-06 12:09 ` Jonathan Cameron
2023-10-06 17:50 ` Dan Williams
2023-10-06 22:15 ` [PATCH v4] " Dave Jiang
2023-10-09 15:47 ` Jonathan Cameron via
2023-10-09 15:47 ` Jonathan Cameron
2023-10-09 16:06 ` Dave Jiang
2023-10-09 15:44 ` [PATCH v3] " Jonathan Cameron via
2023-10-09 15:44 ` Jonathan Cameron
2023-10-07 21:17 ` Michael S. Tsirkin
2023-10-09 15:40 ` Jonathan Cameron via
2023-10-09 15:40 ` Jonathan Cameron
2023-10-05 17:00 ` Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 34/63] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 35/63] hw/i386/acpi-build: Use pc_madt_cpu_entry() directly Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 36/63] hw/acpi/cpu: Have build_cpus_aml() take a build_madt_cpu_fn callback Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 37/63] hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual method Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 38/63] hw/acpi/acpi_dev_interface: Remove now unused #include "hw/boards.h" Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 39/63] hw/i386: Remove now redundant TYPE_ACPI_GED_X86 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 40/63] hw/i386/acpi-build: Determine SMI command port just once Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 41/63] hw/acpi: Trace GPE access in all device models, not just PIIX4 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 42/63] hw/acpi/core: Trace enable and status registers of GPE separately Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 43/63] vdpa: fix gcc cvq_isolated uninitialized variable warning Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 44/63] vdpa net: zero vhost_vdpa iova_tree pointer at cleanup Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 45/63] hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 46/63] hw/cxl: Add utility functions decoder interleave ways and target count Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 47/63] hw/cxl: Fix and use same calculation for HDM decoder block size everywhere Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 48/63] hw/cxl: Support 4 HDM decoders at all levels of topology Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 49/63] hw/pci-bridge/cxl-upstream: Add serial number extended capability support Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 50/63] vdpa net: fix error message setting virtio status Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 51/63] vdpa net: stop probing if cannot set features Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 52/63] vdpa net: follow VirtIO initialization properly at cvq isolation probing Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 53/63] amd_iommu: Fix APIC address check Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 54/63] hw/i386/pc: improve physical address space bound check for 32-bit x86 systems Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 55/63] pcie_sriov: unregister_vfs(): fix error path Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 56/63] libvhost-user.c: add assertion to vu_message_read_default Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 57/63] virtio: use shadow_avail_idx while checking number of heads Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 58/63] virtio: remove unnecessary thread fence while reading next descriptor Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 59/63] virtio: remove unused next argument from virtqueue_split_read_next_desc() Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 60/63] util/uuid: add a hash function Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 61/63] hw/display: introduce virtio-dmabuf Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 62/63] vhost-user: add shared_object msg Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 63/63] libvhost-user: handle " Michael S. Tsirkin
2023-10-04 8:54 ` [PULL 00/63] virtio,pci: features, cleanups Philippe Mathieu-Daudé
2023-10-04 9:08 ` Michael S. Tsirkin
2023-10-04 8:58 ` Michael S. Tsirkin
2023-10-04 16:26 ` Michael S. Tsirkin
2023-10-04 16:50 ` Stefan Hajnoczi
2023-10-04 17:04 ` Michael S. Tsirkin
2023-10-04 17:40 ` Thomas Huth
2023-10-04 22:23 ` Michael S. Tsirkin
2023-10-05 6:10 ` Thomas Huth
2023-10-04 18:23 ` Stefan Hajnoczi
2023-10-04 17:20 ` Michael S. Tsirkin
2023-10-04 18:29 ` Stefan Hajnoczi
2023-10-04 22:16 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b24272731cfab1e58d5c49c49419045d277f93e9.1696408966.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=leiyang@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).