From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Bernhard Beschow" <shentey@gmail.com>,
"Hervé Poussineau" <hpoussin@reactos.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [PULL v2 41/78] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS
Date: Thu, 19 Oct 2023 14:22:59 -0400 [thread overview]
Message-ID: <b2dafe19edd0658f179b3d8cf8869d5391e8d64c.1697739629.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1697739629.git.mst@redhat.com>
From: Bernhard Beschow <shentey@gmail.com>
PIIX_NUM_PIC_IRQS is assumed to be the same as ISA_NUM_IRQS, otherwise
inconsistencies can occur.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-5-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/southbridge/piix.h | 5 ++---
hw/isa/piix3.c | 8 ++++----
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/include/hw/southbridge/piix.h b/include/hw/southbridge/piix.h
index 278171752f..2317bb7974 100644
--- a/include/hw/southbridge/piix.h
+++ b/include/hw/southbridge/piix.h
@@ -27,7 +27,6 @@
*/
#define PIIX_RCR_IOPORT 0xcf9
-#define PIIX_NUM_PIC_IRQS 16 /* i8259 * 2 */
#define PIIX_NUM_PIRQS 4ULL /* PIRQ[A-D] */
struct PIIXState {
@@ -39,10 +38,10 @@ struct PIIXState {
* So one PIC level is tracked by PIIX_NUM_PIRQS bits.
*
* PIRQ is mapped to PIC pins, we track it by
- * PIIX_NUM_PIRQS * PIIX_NUM_PIC_IRQS = 64 bits with
+ * PIIX_NUM_PIRQS * ISA_NUM_IRQS = 64 bits with
* pic_irq * PIIX_NUM_PIRQS + pirq
*/
-#if PIIX_NUM_PIC_IRQS * PIIX_NUM_PIRQS > 64
+#if ISA_NUM_IRQS * PIIX_NUM_PIRQS > 64
#error "unable to encode pic state in 64bit in pic_levels."
#endif
uint64_t pic_levels;
diff --git a/hw/isa/piix3.c b/hw/isa/piix3.c
index 117024e450..7240c91440 100644
--- a/hw/isa/piix3.c
+++ b/hw/isa/piix3.c
@@ -48,7 +48,7 @@ static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level)
uint64_t mask;
pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
- if (pic_irq >= PIIX_NUM_PIC_IRQS) {
+ if (pic_irq >= ISA_NUM_IRQS) {
return;
}
@@ -62,7 +62,7 @@ static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level)
int pic_irq;
pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
- if (pic_irq >= PIIX_NUM_PIC_IRQS) {
+ if (pic_irq >= ISA_NUM_IRQS) {
return;
}
@@ -83,7 +83,7 @@ static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
int irq = piix3->dev.config[PIIX_PIRQCA + pin];
PCIINTxRoute route;
- if (irq < PIIX_NUM_PIC_IRQS) {
+ if (irq < ISA_NUM_IRQS) {
route.mode = PCI_INTX_ENABLED;
route.irq = irq;
} else {
@@ -115,7 +115,7 @@ static void piix3_write_config(PCIDevice *dev,
pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
piix3_update_irq_levels(piix3);
- for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
+ for (pic_irq = 0; pic_irq < ISA_NUM_IRQS; pic_irq++) {
piix3_set_irq_pic(piix3, pic_irq);
}
}
--
MST
next prev parent reply other threads:[~2023-10-19 18:36 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-19 18:24 [PULL v2 00/78] virtio,pc,pci: features, cleanups Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 01/78] vdpa: Use iovec for vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 02/78] vdpa: Avoid using vhost_vdpa_net_load_*() outside vhost_vdpa_net_load() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 03/78] vdpa: Check device ack in vhost_vdpa_net_load_rx_mode() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 04/78] vdpa: Move vhost_svq_poll() to the caller of vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 05/78] vdpa: Introduce cursors to vhost_vdpa_net_loadx() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 06/78] vhost: Expose vhost_svq_available_slots() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 07/78] vdpa: Send cvq state load commands in parallel Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 08/78] tests: test-smp-parse: Add the test for cores/threads per socket helpers Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 09/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 10/78] tests: bios-tables-test: Add test for smbios type4 count Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 11/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 12/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core " Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 13/78] tests: bios-tables-test: Add test for smbios type4 core count Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 14/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 core count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 15/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count2 test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 16/78] tests: bios-tables-test: Extend smbios core count2 test to cover general topology Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 17/78] tests: bios-tables-test: Update ACPI table binaries for smbios core count2 test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 18/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 19/78] tests: bios-tables-test: Add test for smbios type4 thread count Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 20/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 21/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count2 test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 22/78] tests: bios-tables-test: Add test for smbios type4 thread count2 Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 23/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count2 test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 24/78] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 25/78] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 26/78] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 27/78] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 28/78] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 29/78] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 30/78] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 31/78] memory: initialize 'fv' in MemoryRegionCache to make Coverity happy Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 32/78] vhost-user: do not send RESET_OWNER on device reset Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 33/78] vhost-backend: remove vhost_kernel_reset_device() Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 34/78] virtio: call ->vhost_reset_device() during reset Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 35/78] hw/i386/acpi-build: Remove build-time assertion on PIIX/ICH9 reset registers being identical Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 36/78] timer/i8254: Fix one shot PIT mode Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 37/78] hw/display: fix memleak from virtio_add_resource Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 38/78] hw/i386/pc: Merge two if statements into one Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 39/78] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 40/78] hw/i386/pc_piix: Assign PIIX3's ISA interrupts before its realize() Michael S. Tsirkin
2023-10-19 18:22 ` Michael S. Tsirkin [this message]
2023-10-19 18:23 ` [PULL v2 42/78] hw/i386/pc_piix: Wire PIIX3's ISA interrupts by new "isa-irqs" property Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 43/78] hw/i386/pc_piix: Remove redundant "piix3" variable Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 44/78] hw/isa/piix3: Rename "pic" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 45/78] hw/i386/pc_q35: Wire ICH9 LPC function's interrupts before its realize() Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 46/78] hw/isa/piix3: Wire PIC IRQs to ISA bus in host device Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 47/78] hw/i386/pc: Wire RTC ISA IRQs in south bridges Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 48/78] hw/isa/piix3: Create IDE controller in host device Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 49/78] hw/isa/piix3: Create USB " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 50/78] hw/isa/piix3: Create power management " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 51/78] hw/isa/piix3: Drop the "3" from PIIX base class name Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 52/78] hw/isa/piix4: Remove unused inbound ISA interrupt lines Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 53/78] hw/isa/piix4: Rename "isa" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 54/78] hw/isa/piix4: Rename reset control operations to match PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 55/78] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 56/78] hw/isa/piix3: Merge hw/isa/piix4.c Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 57/78] hw/isa/piix: Allow for optional PIC creation in PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 58/78] hw/isa/piix: Allow for optional PIT " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 59/78] hw/isa/piix: Harmonize names of reset control memory regions Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 60/78] hw/isa/piix: Share PIIX3's base class with PIIX4 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 61/78] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 62/78] hw/isa/piix: Rename functions to be shared for PCI interrupt triggering Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 63/78] hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 64/78] hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 65/78] hw/isa/piix: Implement multi-process QEMU support also for PIIX4 Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 66/78] hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 67/78] vhost-user-common: send get_inflight_fd once Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 68/78] vhost: move and rename the conn retry times Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 69/78] vhost-user-scsi: support reconnect to backend Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 70/78] vhost-user-scsi: start vhost when guest kicks Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 71/78] vhost-user: fix lost reconnect Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 72/78] hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 73/78] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 74/78] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 75/78] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 76/78] vhost-user: Fix protocol feature bit conflict Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 77/78] MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 78/78] intel-iommu: Report interrupt remapping faults, fix return value Michael S. Tsirkin
2023-10-20 16:00 ` [PULL v2 00/78] virtio,pc,pci: features, cleanups Stefan Hajnoczi
2023-10-23 11:38 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b2dafe19edd0658f179b3d8cf8869d5391e8d64c.1697739629.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=aurelien@aurel32.net \
--cc=hpoussin@reactos.org \
--cc=marcel.apfelbaum@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=shentey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).