Re: [Qemu-devel] [PATCH] Add rtl8139b

["Igor Kovalenko" <igor.v.kovalenko@gmail.com>]

On Wed, Dec 17, 2008 at 12:36 AM, Andreas Färber <andreas.faerber@web.de> wrote:
>
> Am 16.12.2008 um 21:42 schrieb Jamie Lokier:
>
>> Igor Kovalenko wrote:
>>>
>>> On Tue, Dec 16, 2008 at 10:19 PM, Jamie Lokier <jamie@shareable.org>
>>> wrote:
>>>>
>>>> takasi-y@ops.dti.ne.jp wrote:
>>>>>
>>>>> +                        " ne2k_pci pcnet rtl8139 rtl8139b e1000\n");
>>>>
>>>> On seeing this in qemu output, and with no documentation, it suggests
>>>> "rtl8139b" is a later device revision than "rtl8139", and preferable
>>>> to use for new VMs.
>>>>
>>>> Imho it would be better to write " rtl8139b rtl8139 " and of course
>>>> document that rtl8139b is an older device than rtl8139.
>>>>
>>>
>>> -net nic,model=rtl8139[,quirks=8139cplus|8139b] default to 8139cplus
>>
>> Nice!  I'd change to [,revision=8139cplus|8139b], as it's not a quirk.
>
> In that case [,revision=cplus|b] would be even simpler. :)
>

Well, no, C+ is a mode of operation supported on 8139 rev C chip, and
probably some later ones. Not "all older chips starting with rev b do
not have it". Extended mode can cause problems with some buggy C+ mode
drivers so it is sometimes handy to disable C+ mode and revert to the
other "compatible" but somewhat slower driver.

Maybe original poster's rationale is required to continue :)

-- 
Kind regards,
Igor V. Kovalenko