From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Bernhard Beschow" <shentey@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Igor Mammedov" <imammedo@redhat.com>,
"Ani Sinha" <anisinha@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Eduardo Habkost" <eduardo@habkost.net>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>
Subject: [PULL 36/63] hw/acpi/cpu: Have build_cpus_aml() take a build_madt_cpu_fn callback
Date: Wed, 4 Oct 2023 04:45:02 -0400 [thread overview]
Message-ID: <b46ecb2b76985ff6b8b6fc3ab4960bd10cb8708f.1696408966.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1696408966.git.mst@redhat.com>
From: Bernhard Beschow <shentey@gmail.com>
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/acpi/cpu.h | 6 +++++-
hw/acpi/cpu.c | 8 ++------
hw/i386/acpi-build.c | 4 ++--
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/include/hw/acpi/cpu.h b/include/hw/acpi/cpu.h
index 999caaf510..bc901660fb 100644
--- a/include/hw/acpi/cpu.h
+++ b/include/hw/acpi/cpu.h
@@ -15,6 +15,7 @@
#include "hw/qdev-core.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/aml-build.h"
+#include "hw/boards.h"
#include "hw/hotplug.h"
typedef struct AcpiCpuStatus {
@@ -55,8 +56,11 @@ typedef struct CPUHotplugFeatures {
const char *smi_path;
} CPUHotplugFeatures;
+typedef void (*build_madt_cpu_fn)(int uid, const CPUArchIdList *apic_ids,
+ GArray *entry, bool force_enabled);
+
void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
- hwaddr io_base,
+ build_madt_cpu_fn build_madt_cpu, hwaddr io_base,
const char *res_root,
const char *event_handler_method);
diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c
index 19c154d78f..65a3202d3f 100644
--- a/hw/acpi/cpu.c
+++ b/hw/acpi/cpu.c
@@ -338,7 +338,7 @@ const VMStateDescription vmstate_cpu_hotplug = {
#define CPU_FW_EJECT_EVENT "CEJF"
void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
- hwaddr io_base,
+ build_madt_cpu_fn build_madt_cpu, hwaddr io_base,
const char *res_root,
const char *event_handler_method)
{
@@ -353,8 +353,6 @@ void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
MachineClass *mc = MACHINE_GET_CLASS(machine);
const CPUArchIdList *arch_ids = mc->possible_cpu_arch_ids(machine);
char *cphp_res_path = g_strdup_printf("%s." CPUHP_RES_DEVICE, res_root);
- Object *obj = object_resolve_path_type("", TYPE_ACPI_DEVICE_IF, NULL);
- AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(obj);
cpu_ctrl_dev = aml_device("%s", cphp_res_path);
{
@@ -664,9 +662,7 @@ void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
aml_append(dev, method);
/* build _MAT object */
- assert(adevc && adevc->madt_cpu);
- adevc->madt_cpu(i, arch_ids, madt_buf,
- true); /* set enabled flag */
+ build_madt_cpu(i, arch_ids, madt_buf, true); /* set enabled flag */
aml_append(dev, aml_name_decl("_MAT",
aml_buffer(madt_buf->len, (uint8_t *)madt_buf->data)));
g_array_free(madt_buf, true);
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 1a7245bea4..dd94154f2b 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1550,8 +1550,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
.smi_path = pm->smi_on_cpuhp ? "\\_SB.PCI0.SMI0.SMIC" : NULL,
.fw_unplugs_cpu = pm->smi_on_cpu_unplug,
};
- build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
- "\\_SB.PCI0", "\\_GPE._E02");
+ build_cpus_aml(dsdt, machine, opts, pc_madt_cpu_entry,
+ pm->cpu_hp_io_base, "\\_SB.PCI0", "\\_GPE._E02");
}
if (pcms->memhp_io_base && nr_mem) {
--
MST
next prev parent reply other threads:[~2023-10-04 8:49 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 8:43 [PULL 00/63] virtio,pci: features, cleanups Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 01/63] pci: SLT must be RO Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 02/63] hw/virtio: Propagate page_mask to vhost_vdpa_listener_skipped_section() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 03/63] hw/virtio: Propagate page_mask to vhost_vdpa_section_end() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 04/63] hw/virtio/vhost-vdpa: Inline TARGET_PAGE_ALIGN() macro Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 05/63] hw/virtio/vhost-vdpa: Use target-agnostic qemu_target_page_mask() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 06/63] hw/virtio: Build vhost-vdpa.o once Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 07/63] hw/virtio/meson: Rename softmmu_virtio_ss[] -> system_virtio_ss[] Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 08/63] virtio: add vhost-user-base and a generic vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 09/63] hw/virtio: add config support to vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 10/63] virtio-net: do not reset vlan filtering at set_features Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 11/63] virtio-net: Expose MAX_VLAN Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 12/63] vdpa: Restore vlan filtering state Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 13/63] vdpa: Allow VIRTIO_NET_F_CTRL_VLAN in SVQ Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 14/63] virtio: don't zero out memory region cache for indirect descriptors Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 15/63] vdpa: use first queue SVQ state for CVQ default Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 16/63] vdpa: export vhost_vdpa_set_vring_ready Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 17/63] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 18/63] vdpa: move vhost_vdpa_set_vring_ready to the caller Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 19/63] vdpa: remove net cvq migration blocker Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 20/63] vhost: Add count argument to vhost_svq_poll() Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 21/63] qmp: remove virtio_list, search QOM tree instead Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 22/63] qmp: update virtio feature maps, vhost-user-gpio introspection Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 23/63] vhost-user: move VhostUserProtocolFeature definition to header file Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 24/63] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 25/63] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 26/63] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 27/63] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 28/63] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 29/63] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 30/63] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-04 10:11 ` Laszlo Ersek
2023-10-04 12:53 ` Michael S. Tsirkin
2023-10-04 13:28 ` Laszlo Ersek
2023-10-04 8:44 ` [PULL 31/63] hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routing Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 32/63] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 33/63] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-04 17:46 ` Thomas Huth
2023-10-04 22:14 ` Michael S. Tsirkin
2023-10-04 23:09 ` [PATCH v3] " Dave Jiang
2023-10-05 3:36 ` Michael S. Tsirkin
2023-10-05 16:11 ` Dave Jiang
2023-10-05 16:32 ` Michael S. Tsirkin
2023-10-06 12:09 ` Jonathan Cameron via
2023-10-06 12:09 ` Jonathan Cameron
2023-10-06 17:50 ` Dan Williams
2023-10-06 22:15 ` [PATCH v4] " Dave Jiang
2023-10-09 15:47 ` Jonathan Cameron via
2023-10-09 15:47 ` Jonathan Cameron
2023-10-09 16:06 ` Dave Jiang
2023-10-09 15:44 ` [PATCH v3] " Jonathan Cameron via
2023-10-09 15:44 ` Jonathan Cameron
2023-10-07 21:17 ` Michael S. Tsirkin
2023-10-09 15:40 ` Jonathan Cameron via
2023-10-09 15:40 ` Jonathan Cameron
2023-10-05 17:00 ` Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 34/63] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 35/63] hw/i386/acpi-build: Use pc_madt_cpu_entry() directly Michael S. Tsirkin
2023-10-04 8:45 ` Michael S. Tsirkin [this message]
2023-10-04 8:45 ` [PULL 37/63] hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual method Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 38/63] hw/acpi/acpi_dev_interface: Remove now unused #include "hw/boards.h" Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 39/63] hw/i386: Remove now redundant TYPE_ACPI_GED_X86 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 40/63] hw/i386/acpi-build: Determine SMI command port just once Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 41/63] hw/acpi: Trace GPE access in all device models, not just PIIX4 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 42/63] hw/acpi/core: Trace enable and status registers of GPE separately Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 43/63] vdpa: fix gcc cvq_isolated uninitialized variable warning Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 44/63] vdpa net: zero vhost_vdpa iova_tree pointer at cleanup Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 45/63] hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 46/63] hw/cxl: Add utility functions decoder interleave ways and target count Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 47/63] hw/cxl: Fix and use same calculation for HDM decoder block size everywhere Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 48/63] hw/cxl: Support 4 HDM decoders at all levels of topology Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 49/63] hw/pci-bridge/cxl-upstream: Add serial number extended capability support Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 50/63] vdpa net: fix error message setting virtio status Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 51/63] vdpa net: stop probing if cannot set features Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 52/63] vdpa net: follow VirtIO initialization properly at cvq isolation probing Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 53/63] amd_iommu: Fix APIC address check Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 54/63] hw/i386/pc: improve physical address space bound check for 32-bit x86 systems Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 55/63] pcie_sriov: unregister_vfs(): fix error path Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 56/63] libvhost-user.c: add assertion to vu_message_read_default Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 57/63] virtio: use shadow_avail_idx while checking number of heads Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 58/63] virtio: remove unnecessary thread fence while reading next descriptor Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 59/63] virtio: remove unused next argument from virtqueue_split_read_next_desc() Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 60/63] util/uuid: add a hash function Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 61/63] hw/display: introduce virtio-dmabuf Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 62/63] vhost-user: add shared_object msg Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 63/63] libvhost-user: handle " Michael S. Tsirkin
2023-10-04 8:54 ` [PULL 00/63] virtio,pci: features, cleanups Philippe Mathieu-Daudé
2023-10-04 9:08 ` Michael S. Tsirkin
2023-10-04 8:58 ` Michael S. Tsirkin
2023-10-04 16:26 ` Michael S. Tsirkin
2023-10-04 16:50 ` Stefan Hajnoczi
2023-10-04 17:04 ` Michael S. Tsirkin
2023-10-04 17:40 ` Thomas Huth
2023-10-04 22:23 ` Michael S. Tsirkin
2023-10-05 6:10 ` Thomas Huth
2023-10-04 18:23 ` Stefan Hajnoczi
2023-10-04 17:20 ` Michael S. Tsirkin
2023-10-04 18:29 ` Stefan Hajnoczi
2023-10-04 22:16 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b46ecb2b76985ff6b8b6fc3ab4960bd10cb8708f.1696408966.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=anisinha@redhat.com \
--cc=eduardo@habkost.net \
--cc=imammedo@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=shentey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).