qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: Havard Skinnemoen <hskinnemoen@google.com>,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: kfting@nuvoton.com, Avi.Fishman@nuvoton.com
Subject: Re: [PATCH v6 07/13] hw/arm: Load -bios image as a boot ROM for npcm7xx
Date: Fri, 17 Jul 2020 14:14:55 +0200	[thread overview]
Message-ID: <b5cf9b0f-9ad9-31b8-12ee-c2f8520b8ffd@kaod.org> (raw)
In-Reply-To: <20200717060258.1602319-8-hskinnemoen@google.com>

On 7/17/20 8:02 AM, Havard Skinnemoen wrote:
> If a -bios option is specified on the command line, load the image into
> the internal ROM memory region, which contains the first instructions
> run by the CPU after reset.
> 
> If -bios is not specified, the vbootrom included with qemu is loaded by
> default.
> 
> Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> ---
>  hw/arm/npcm7xx_boards.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
> index 0b9dce2b35..f32557e0e1 100644
> --- a/hw/arm/npcm7xx_boards.c
> +++ b/hw/arm/npcm7xx_boards.c
> @@ -18,12 +18,41 @@
>  
>  #include "hw/arm/npcm7xx.h"
>  #include "hw/core/cpu.h"
> +#include "hw/loader.h"
>  #include "qapi/error.h"
> +#include "qemu-common.h"
>  #include "qemu/units.h"
> +#include "sysemu/sysemu.h"
>  
>  #define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7
>  #define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff
>  
> +static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin";
> +
> +static void npcm7xx_load_bootrom(NPCM7xxState *soc)
> +{
> +    g_autofree char *filename = NULL;
> +    const char *bootrom;
> +    int ret;
> +
> +    if (bios_name) {
> +        bootrom = bios_name;
> +    } else {
> +        bootrom = npcm7xx_default_bootrom;

you could simply assign bios_name. No need to resend for that.

Reviewed-by: Cédric Le Goater <clg@kaod.org>

C.

> +    }
> +
> +    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bootrom);
> +    if (!filename) {
> +        error_report("Could not find ROM image '%s'", bootrom);
> +        exit(1);
> +    }
> +    ret = load_image_mr(filename, &soc->irom);
> +    if (ret < 0) {
> +        error_report("Failed to load ROM image '%s'", filename);
> +        exit(1);
> +    }
> +}
> +
>  static void npcm7xx_connect_dram(NPCM7xxState *soc, MemoryRegion *dram)
>  {
>      memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, dram);
> @@ -60,6 +89,7 @@ static void npcm750_evb_init(MachineState *machine)
>      npcm7xx_connect_dram(soc, machine->ram);
>      qdev_realize(DEVICE(soc), NULL, &error_fatal);
>  
> +    npcm7xx_load_bootrom(soc);
>      npcm7xx_load_kernel(machine, soc);
>  }
>  
> @@ -71,6 +101,7 @@ static void quanta_gsj_init(MachineState *machine)
>      npcm7xx_connect_dram(soc, machine->ram);
>      qdev_realize(DEVICE(soc), NULL, &error_fatal);
>  
> +    npcm7xx_load_bootrom(soc);
>      npcm7xx_load_kernel(machine, soc);
>  }
>  
> 



  reply	other threads:[~2020-07-17 12:16 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17  6:02 [PATCH v6 00/13] Add Nuvoton NPCM730/NPCM750 SoCs and two BMC machines Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 01/13] hw/misc: Add NPCM7xx System Global Control Registers device model Havard Skinnemoen
2020-07-17  7:59   ` Philippe Mathieu-Daudé
2020-07-17  6:02 ` [PATCH v6 02/13] hw/misc: Add NPCM7xx Clock Controller " Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 03/13] hw/timer: Add NPCM7xx Timer " Havard Skinnemoen
2020-07-17  8:05   ` Philippe Mathieu-Daudé
2020-07-17  8:10   ` Philippe Mathieu-Daudé
2020-07-17  6:02 ` [PATCH v6 04/13] hw/arm: Add NPCM730 and NPCM750 SoC models Havard Skinnemoen
2020-07-17 12:20   ` Cédric Le Goater
2020-07-17 16:59     ` Havard Skinnemoen
2020-07-18  6:38       ` Philippe Mathieu-Daudé
2020-07-17  6:02 ` [PATCH v6 05/13] hw/arm: Add two NPCM7xx-based machines Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 06/13] roms: Add virtual Boot ROM for NPCM7xx SoCs Havard Skinnemoen
2020-07-17 12:26   ` Cédric Le Goater
2020-07-17  6:02 ` [PATCH v6 07/13] hw/arm: Load -bios image as a boot ROM for npcm7xx Havard Skinnemoen
2020-07-17 12:14   ` Cédric Le Goater [this message]
2020-07-17  6:02 ` [PATCH v6 08/13] hw/nvram: NPCM7xx OTP device model Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 09/13] hw/mem: Stubbed out NPCM7xx Memory Controller model Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 10/13] hw/ssi: NPCM7xx Flash Interface Unit device model Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 11/13] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 12/13] docs/system: Add Nuvoton machine documentation Havard Skinnemoen
2020-07-17  6:02 ` [PATCH v6 13/13] tests/acceptance: console boot tests for quanta-gsj Havard Skinnemoen
2020-07-17 12:33   ` Cédric Le Goater
2020-07-20  8:22     ` Joel Stanley
2020-07-20  9:49       ` Philippe Mathieu-Daudé
2020-07-17 20:32 ` [PATCH v6 00/13] Add Nuvoton NPCM730/NPCM750 SoCs and two BMC machines Cédric Le Goater
2020-07-18  2:17   ` Havard Skinnemoen
2020-08-03 19:08 ` Philippe Mathieu-Daudé
2020-08-03 20:37   ` Havard Skinnemoen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b5cf9b0f-9ad9-31b8-12ee-c2f8520b8ffd@kaod.org \
    --to=clg@kaod.org \
    --cc=Avi.Fishman@nuvoton.com \
    --cc=hskinnemoen@google.com \
    --cc=kfting@nuvoton.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).