qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Bernhard Beschow" <shentey@gmail.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Igor Mammedov" <imammedo@redhat.com>,
	"Ani Sinha" <anisinha@redhat.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Eduardo Habkost" <eduardo@habkost.net>
Subject: [PULL 37/63] hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual method
Date: Wed, 4 Oct 2023 04:45:05 -0400	[thread overview]
Message-ID: <b96c47608e42d782811df7fc2ab4e1d51bfdbf8b.1696408966.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1696408966.git.mst@redhat.com>

From: Bernhard Beschow <shentey@gmail.com>

This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.

Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/acpi/acpi_dev_interface.h | 2 --
 hw/acpi/acpi-x86-stub.c              | 6 ------
 hw/acpi/piix4.c                      | 2 --
 hw/i386/generic_event_device_x86.c   | 9 ---------
 hw/isa/lpc_ich9.c                    | 1 -
 5 files changed, 20 deletions(-)

diff --git a/include/hw/acpi/acpi_dev_interface.h b/include/hw/acpi/acpi_dev_interface.h
index a1648220ff..ca92928124 100644
--- a/include/hw/acpi/acpi_dev_interface.h
+++ b/include/hw/acpi/acpi_dev_interface.h
@@ -52,7 +52,5 @@ struct AcpiDeviceIfClass {
     /* <public> */
     void (*ospm_status)(AcpiDeviceIf *adev, ACPIOSTInfoList ***list);
     void (*send_event)(AcpiDeviceIf *adev, AcpiEventStatusBits ev);
-    void (*madt_cpu)(int uid, const CPUArchIdList *apic_ids, GArray *entry,
-                     bool force_enabled);
 };
 #endif
diff --git a/hw/acpi/acpi-x86-stub.c b/hw/acpi/acpi-x86-stub.c
index d0d399d26b..9662a594ad 100644
--- a/hw/acpi/acpi-x86-stub.c
+++ b/hw/acpi/acpi-x86-stub.c
@@ -1,12 +1,6 @@
 #include "qemu/osdep.h"
-#include "hw/i386/pc.h"
 #include "hw/i386/acpi-build.h"
 
-void pc_madt_cpu_entry(int uid, const CPUArchIdList *apic_ids,
-                       GArray *entry, bool force_enabled)
-{
-}
-
 Object *acpi_get_i386_pci_host(void)
 {
        return NULL;
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index 63d2113b86..a7892c444c 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -20,7 +20,6 @@
  */
 
 #include "qemu/osdep.h"
-#include "hw/i386/pc.h"
 #include "hw/irq.h"
 #include "hw/isa/apm.h"
 #include "hw/i2c/pm_smbus.h"
@@ -654,7 +653,6 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data)
     hc->is_hotpluggable_bus = piix4_is_hotpluggable_bus;
     adevc->ospm_status = piix4_ospm_status;
     adevc->send_event = piix4_send_gpe;
-    adevc->madt_cpu = pc_madt_cpu_entry;
 }
 
 static const TypeInfo piix4_pm_info = {
diff --git a/hw/i386/generic_event_device_x86.c b/hw/i386/generic_event_device_x86.c
index e26fb02a2e..8fc233e1f1 100644
--- a/hw/i386/generic_event_device_x86.c
+++ b/hw/i386/generic_event_device_x86.c
@@ -8,19 +8,10 @@
 
 #include "qemu/osdep.h"
 #include "hw/acpi/generic_event_device.h"
-#include "hw/i386/pc.h"
-
-static void acpi_ged_x86_class_init(ObjectClass *class, void *data)
-{
-    AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_CLASS(class);
-
-    adevc->madt_cpu = pc_madt_cpu_entry;
-}
 
 static const TypeInfo acpi_ged_x86_info = {
     .name          = TYPE_ACPI_GED_X86,
     .parent        = TYPE_ACPI_GED,
-    .class_init    = acpi_ged_x86_class_init,
     .interfaces = (InterfaceInfo[]) {
         { TYPE_HOTPLUG_HANDLER },
         { TYPE_ACPI_DEVICE_IF },
diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
index bce487ac4e..3f59980aa0 100644
--- a/hw/isa/lpc_ich9.c
+++ b/hw/isa/lpc_ich9.c
@@ -891,7 +891,6 @@ static void ich9_lpc_class_init(ObjectClass *klass, void *data)
     hc->is_hotpluggable_bus = ich9_pm_is_hotpluggable_bus;
     adevc->ospm_status = ich9_pm_ospm_status;
     adevc->send_event = ich9_send_gpe;
-    adevc->madt_cpu = pc_madt_cpu_entry;
     amldevc->build_dev_aml = build_ich9_isa_aml;
 }
 
-- 
MST



  parent reply	other threads:[~2023-10-04  8:56 UTC|newest]

Thread overview: 99+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-04  8:43 [PULL 00/63] virtio,pci: features, cleanups Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 01/63] pci: SLT must be RO Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 02/63] hw/virtio: Propagate page_mask to vhost_vdpa_listener_skipped_section() Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 03/63] hw/virtio: Propagate page_mask to vhost_vdpa_section_end() Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 04/63] hw/virtio/vhost-vdpa: Inline TARGET_PAGE_ALIGN() macro Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 05/63] hw/virtio/vhost-vdpa: Use target-agnostic qemu_target_page_mask() Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 06/63] hw/virtio: Build vhost-vdpa.o once Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 07/63] hw/virtio/meson: Rename softmmu_virtio_ss[] -> system_virtio_ss[] Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 08/63] virtio: add vhost-user-base and a generic vhost-user-device Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 09/63] hw/virtio: add config support to vhost-user-device Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 10/63] virtio-net: do not reset vlan filtering at set_features Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 11/63] virtio-net: Expose MAX_VLAN Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 12/63] vdpa: Restore vlan filtering state Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 13/63] vdpa: Allow VIRTIO_NET_F_CTRL_VLAN in SVQ Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 14/63] virtio: don't zero out memory region cache for indirect descriptors Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 15/63] vdpa: use first queue SVQ state for CVQ default Michael S. Tsirkin
2023-10-04  8:43 ` [PULL 16/63] vdpa: export vhost_vdpa_set_vring_ready Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 17/63] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 18/63] vdpa: move vhost_vdpa_set_vring_ready to the caller Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 19/63] vdpa: remove net cvq migration blocker Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 20/63] vhost: Add count argument to vhost_svq_poll() Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 21/63] qmp: remove virtio_list, search QOM tree instead Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 22/63] qmp: update virtio feature maps, vhost-user-gpio introspection Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 23/63] vhost-user: move VhostUserProtocolFeature definition to header file Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 24/63] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 25/63] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 26/63] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 27/63] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 28/63] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 29/63] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 30/63] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-04 10:11   ` Laszlo Ersek
2023-10-04 12:53     ` Michael S. Tsirkin
2023-10-04 13:28       ` Laszlo Ersek
2023-10-04  8:44 ` [PULL 31/63] hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routing Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 32/63] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 33/63] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-04 17:46   ` Thomas Huth
2023-10-04 22:14     ` Michael S. Tsirkin
2023-10-04 23:09       ` [PATCH v3] " Dave Jiang
2023-10-05  3:36         ` Michael S. Tsirkin
2023-10-05 16:11           ` Dave Jiang
2023-10-05 16:32             ` Michael S. Tsirkin
2023-10-06 12:09               ` Jonathan Cameron via
2023-10-06 12:09                 ` Jonathan Cameron
2023-10-06 17:50                 ` Dan Williams
2023-10-06 22:15                   ` [PATCH v4] " Dave Jiang
2023-10-09 15:47                     ` Jonathan Cameron via
2023-10-09 15:47                       ` Jonathan Cameron
2023-10-09 16:06                       ` Dave Jiang
2023-10-09 15:44                   ` [PATCH v3] " Jonathan Cameron via
2023-10-09 15:44                     ` Jonathan Cameron
2023-10-07 21:17                 ` Michael S. Tsirkin
2023-10-09 15:40                   ` Jonathan Cameron via
2023-10-09 15:40                     ` Jonathan Cameron
2023-10-05 17:00             ` Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 34/63] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-04  8:44 ` [PULL 35/63] hw/i386/acpi-build: Use pc_madt_cpu_entry() directly Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 36/63] hw/acpi/cpu: Have build_cpus_aml() take a build_madt_cpu_fn callback Michael S. Tsirkin
2023-10-04  8:45 ` Michael S. Tsirkin [this message]
2023-10-04  8:45 ` [PULL 38/63] hw/acpi/acpi_dev_interface: Remove now unused #include "hw/boards.h" Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 39/63] hw/i386: Remove now redundant TYPE_ACPI_GED_X86 Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 40/63] hw/i386/acpi-build: Determine SMI command port just once Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 41/63] hw/acpi: Trace GPE access in all device models, not just PIIX4 Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 42/63] hw/acpi/core: Trace enable and status registers of GPE separately Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 43/63] vdpa: fix gcc cvq_isolated uninitialized variable warning Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 44/63] vdpa net: zero vhost_vdpa iova_tree pointer at cleanup Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 45/63] hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 46/63] hw/cxl: Add utility functions decoder interleave ways and target count Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 47/63] hw/cxl: Fix and use same calculation for HDM decoder block size everywhere Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 48/63] hw/cxl: Support 4 HDM decoders at all levels of topology Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 49/63] hw/pci-bridge/cxl-upstream: Add serial number extended capability support Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 50/63] vdpa net: fix error message setting virtio status Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 51/63] vdpa net: stop probing if cannot set features Michael S. Tsirkin
2023-10-04  8:45 ` [PULL 52/63] vdpa net: follow VirtIO initialization properly at cvq isolation probing Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 53/63] amd_iommu: Fix APIC address check Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 54/63] hw/i386/pc: improve physical address space bound check for 32-bit x86 systems Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 55/63] pcie_sriov: unregister_vfs(): fix error path Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 56/63] libvhost-user.c: add assertion to vu_message_read_default Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 57/63] virtio: use shadow_avail_idx while checking number of heads Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 58/63] virtio: remove unnecessary thread fence while reading next descriptor Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 59/63] virtio: remove unused next argument from virtqueue_split_read_next_desc() Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 60/63] util/uuid: add a hash function Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 61/63] hw/display: introduce virtio-dmabuf Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 62/63] vhost-user: add shared_object msg Michael S. Tsirkin
2023-10-04  8:46 ` [PULL 63/63] libvhost-user: handle " Michael S. Tsirkin
2023-10-04  8:54 ` [PULL 00/63] virtio,pci: features, cleanups Philippe Mathieu-Daudé
2023-10-04  9:08   ` Michael S. Tsirkin
2023-10-04  8:58 ` Michael S. Tsirkin
2023-10-04 16:26 ` Michael S. Tsirkin
2023-10-04 16:50 ` Stefan Hajnoczi
2023-10-04 17:04   ` Michael S. Tsirkin
2023-10-04 17:40     ` Thomas Huth
2023-10-04 22:23       ` Michael S. Tsirkin
2023-10-05  6:10         ` Thomas Huth
2023-10-04 18:23     ` Stefan Hajnoczi
2023-10-04 17:20   ` Michael S. Tsirkin
2023-10-04 18:29     ` Stefan Hajnoczi
2023-10-04 22:16       ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b96c47608e42d782811df7fc2ab4e1d51bfdbf8b.1696408966.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=anisinha@redhat.com \
    --cc=aurelien@aurel32.net \
    --cc=eduardo@habkost.net \
    --cc=imammedo@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=shentey@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).