Re: [PATCH v4 19/25] vfio: Use new Error** argument in vfio_save_setup()

["Cédric Le Goater" <clg@redhat.com>]

On 3/7/24 10:04, Eric Auger wrote:
> Hi Cédric,
> 
> On 3/6/24 14:34, Cédric Le Goater wrote:
>> Add an Error** argument to vfio_migration_set_state() and adjust
>> callers, including vfio_save_setup(). The error will be propagated up
>> to qemu_savevm_state_setup() where the save_setup() handler is
>> executed.
>>
>> Modify vfio_vmstate_change_prepare() and vfio_vmstate_change() to
>> store a reported error under the migration stream if a migration is in
>> progress.
>>
>> Signed-off-by: Cédric Le Goater <clg@redhat.com>
>> ---
>>
>>   Changes in v3:
>>
>>   - Use error_setg_errno() in vfio_save_setup()
>>   - Made sure an error is always set in case of failure in
>>     vfio_load_setup()
>>     
>>   hw/vfio/migration.c | 67 ++++++++++++++++++++++++++-------------------
>>   1 file changed, 39 insertions(+), 28 deletions(-)
>>
>> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
>> index a3bb1a92ba0b9c2c585efe54cfda0b774a81dcb9..71ade14a7942358094371a86c00718f5979113ea 100644
>> --- a/hw/vfio/migration.c
>> +++ b/hw/vfio/migration.c
>> @@ -84,7 +84,8 @@ static const char *mig_state_to_str(enum vfio_device_mig_state state)
>>   
>>   static int vfio_migration_set_state(VFIODevice *vbasedev,
>>                                       enum vfio_device_mig_state new_state,
>> -                                    enum vfio_device_mig_state recover_state)
>> +                                    enum vfio_device_mig_state recover_state,
>> +                                    Error **errp)
>>   {
>>       VFIOMigration *migration = vbasedev->migration;
>>       uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) +
>> @@ -104,15 +105,15 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
>>           ret = -errno;
>>   
>>           if (recover_state == VFIO_DEVICE_STATE_ERROR) {
>> -            error_report("%s: Failed setting device state to %s, err: %s. "
>> -                         "Recover state is ERROR. Resetting device",
>> -                         vbasedev->name, mig_state_to_str(new_state),
>> -                         strerror(errno));
>> +            error_setg(errp, "%s: Failed setting device state to %s, err: %s. "
>> +                       "Recover state is ERROR. Resetting device",
>> +                       vbasedev->name, mig_state_to_str(new_state),
>> +                       strerror(errno));
> you can use the error_setg_errno variant here and below.

sure.


>>   
>>               goto reset_device;
>>           }
>>   
>> -        error_report(
>> +        error_setg(errp,
>>               "%s: Failed setting device state to %s, err: %s. Setting device in recover state %s",
>>                        vbasedev->name, mig_state_to_str(new_state),
>>                        strerror(errno), mig_state_to_str(recover_state));
>> @@ -120,7 +121,7 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
>>           mig_state->device_state = recover_state;
>>           if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) {
>>               ret = -errno;
>> -            error_report(
>> +            error_setg(errp,
>>                   "%s: Failed setting device in recover state, err: %s. Resetting device",
>>                            vbasedev->name, strerror(errno));
>>   
>> @@ -139,7 +140,7 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
>>                * This can happen if the device is asynchronously reset and
>>                * terminates a data transfer.
>>                */
>> -            error_report("%s: data_fd out of sync", vbasedev->name);
>> +            error_setg(errp, "%s: data_fd out of sync", vbasedev->name);
>>               close(mig_state->data_fd);
>>   
>>               return -EBADF;
>> @@ -170,10 +171,11 @@ reset_device:
>>    */
>>   static int
>>   vfio_migration_set_state_or_reset(VFIODevice *vbasedev,
>> -                                  enum vfio_device_mig_state new_state)
>> +                                  enum vfio_device_mig_state new_state,
>> +                                  Error **errp)
>>   {
>>       return vfio_migration_set_state(vbasedev, new_state,
>> -                                    VFIO_DEVICE_STATE_ERROR);
>> +                                    VFIO_DEVICE_STATE_ERROR, errp);
>>   }
>>   
>>   static int vfio_load_buffer(QEMUFile *f, VFIODevice *vbasedev,
>> @@ -401,10 +403,8 @@ static int vfio_save_setup(QEMUFile *f, void *opaque, Error **errp)
>>           switch (migration->device_state) {
>>           case VFIO_DEVICE_STATE_RUNNING:
>>               ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_PRE_COPY,
>> -                                           VFIO_DEVICE_STATE_RUNNING);
>> +                                           VFIO_DEVICE_STATE_RUNNING, errp);
>>               if (ret) {
>> -                error_setg(errp, "%s: Failed to set new PRE_COPY state",
>> -                           vbasedev->name);
>>                   return ret;
>>               }
>>   
>> @@ -437,13 +437,20 @@ static void vfio_save_cleanup(void *opaque)
>>   {
>>       VFIODevice *vbasedev = opaque;
>>       VFIOMigration *migration = vbasedev->migration;
>> +    Error *local_err = NULL;
>> +    int ret;
>>   
>>       /*
>>        * Changing device state from STOP_COPY to STOP can take time. Do it here,
>>        * after migration has completed, so it won't increase downtime.
>>        */
>>       if (migration->device_state == VFIO_DEVICE_STATE_STOP_COPY) {
>> -        vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_STOP);
>> +        ret = vfio_migration_set_state_or_reset(vbasedev,
>> +                                                VFIO_DEVICE_STATE_STOP,
>> +                                                &local_err);
>> +        if (ret) {
>> +            error_report_err(local_err);
>> +        }
>>       }
>>   
>>       g_free(migration->data_buffer);
>> @@ -549,11 +556,13 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
>>       VFIODevice *vbasedev = opaque;
>>       ssize_t data_size;
>>       int ret;
>> +    Error *local_err = NULL;
>>   
>>       /* We reach here with device state STOP or STOP_COPY only */
>>       ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_STOP_COPY,
>> -                                   VFIO_DEVICE_STATE_STOP);
>> +                                   VFIO_DEVICE_STATE_STOP, &local_err);
>>       if (ret) {
>> +        error_report_err(local_err);
>>           return ret;
>>       }
>>   
>> @@ -591,14 +600,9 @@ static void vfio_save_state(QEMUFile *f, void *opaque)
>>   static int vfio_load_setup(QEMUFile *f, void *opaque, Error **errp)
>>   {
>>       VFIODevice *vbasedev = opaque;
>> -    int ret;
>>   
>> -    ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING,
>> -                                   vbasedev->migration->device_state);
>> -    if (ret) {
>> -        error_setg(errp, "%s: Failed to set RESUMING state", vbasedev->name);
>> -    }
>> -    return ret;
>> +    return vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING,
>> +                                    vbasedev->migration->device_state, errp);
>>   }
>>   
>>   static int vfio_load_cleanup(void *opaque)
>> @@ -714,20 +718,22 @@ static void vfio_vmstate_change_prepare(void *opaque, bool running,
>>       VFIODevice *vbasedev = opaque;
>>       VFIOMigration *migration = vbasedev->migration;
>>       enum vfio_device_mig_state new_state;
>> +    Error *local_err = NULL;
>>       int ret;
>>   
>>       new_state = migration->device_state == VFIO_DEVICE_STATE_PRE_COPY ?
>>                       VFIO_DEVICE_STATE_PRE_COPY_P2P :
>>                       VFIO_DEVICE_STATE_RUNNING_P2P;
>>   
>> -    ret = vfio_migration_set_state_or_reset(vbasedev, new_state);
>> +    ret = vfio_migration_set_state_or_reset(vbasedev, new_state, &local_err);
>>       if (ret) {
>>           /*
>>            * Migration should be aborted in this case, but vm_state_notify()
>>            * currently does not support reporting failures.
>>            */
> if ret and we do not enter the condition below, we may leak the
> local_err. Same below.

yes. I will export and use vfio_set_migration_error() from common.c instead.


Thanks,

C.




> 
> Eric
>>           if (migrate_get_current()->to_dst_file) {
>> -            qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
>> +            qemu_file_set_error_obj(migrate_get_current()->to_dst_file, ret,
>> +                                    local_err);
>>           }
>>       }
>>   
>> @@ -740,6 +746,7 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
>>   {
>>       VFIODevice *vbasedev = opaque;
>>       enum vfio_device_mig_state new_state;
>> +    Error *local_err = NULL;
>>       int ret;
>>   
>>       if (running) {
>> @@ -752,14 +759,15 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
>>                   VFIO_DEVICE_STATE_STOP;
>>       }
>>   
>> -    ret = vfio_migration_set_state_or_reset(vbasedev, new_state);
>> +    ret = vfio_migration_set_state_or_reset(vbasedev, new_state, &local_err);
>>       if (ret) {
>>           /*
>>            * Migration should be aborted in this case, but vm_state_notify()
>>            * currently does not support reporting failures.
>>            */
>>           if (migrate_get_current()->to_dst_file) {
>> -            qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
>> +            qemu_file_set_error_obj(migrate_get_current()->to_dst_file, ret,
>> +                                    local_err);
>>           }
>>       }
>>   
>> @@ -773,13 +781,16 @@ static int vfio_migration_state_notifier(NotifierWithReturn *notifier,
>>       VFIOMigration *migration = container_of(notifier, VFIOMigration,
>>                                               migration_state);
>>       VFIODevice *vbasedev = migration->vbasedev;
>> +    int ret = 0;
>>   
>>       trace_vfio_migration_state_notifier(vbasedev->name, e->type);
>>   
>>       if (e->type == MIG_EVENT_PRECOPY_FAILED) {
>> -        vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_RUNNING);
>> +        ret = vfio_migration_set_state_or_reset(vbasedev,
>> +                                                VFIO_DEVICE_STATE_RUNNING,
>> +                                                errp);
>>       }
>> -    return 0;
>> +    return ret;
>>   }
>>   
>>   static void vfio_migration_free(VFIODevice *vbasedev)
>