From: Paolo Bonzini <pbonzini@redhat.com>
To: Eduardo Habkost <ehabkost@redhat.com>,
David Hildenbrand <david@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>,
qemu-devel@nongnu.org,
Richard Henderson <richard.henderson@linaro.org>,
cohuck@redhat.com, borntraeger@de.ibm.com,
Alexander Graf <agraf@suse.de>,
Matthew Rosato <mjrosato@linux.vnet.ibm.com>,
Eric Blake <eblake@redhat.com>,
Markus Armbruster <armbru@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v3 08/21] s390x: move sclp_service_call() to sclp.h
Date: Mon, 11 Sep 2017 12:23:10 +0200 [thread overview]
Message-ID: <c758ae70-a664-d13a-dd24-768f71e3f2e4@redhat.com> (raw)
In-Reply-To: <20170909220737.GL7570@localhost.localdomain>
On 10/09/2017 00:07, Eduardo Habkost wrote:
> On Fri, Sep 08, 2017 at 02:46:36PM +0200, David Hildenbrand wrote:
>> On 08.09.2017 06:21, Thomas Huth wrote:
>>> On 07.09.2017 22:13, David Hildenbrand wrote:
>>>> Implemented in sclp.c, so let's move it to the right include file.
>>>> Fix up one include. Do a forward declaration of CPUS390XState to fix the
>>>> two sclp consoles complaining.
>>>>
>>>> Signed-off-by: David Hildenbrand <david@redhat.com>
>>>> ---
>>>> include/hw/s390x/sclp.h | 2 ++
>>>> target/s390x/cpu.h | 1 -
>>>> target/s390x/misc_helper.c | 1 +
>>>> 3 files changed, 3 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h
>>>> index a72d096081..4b86a8a293 100644
>>>> --- a/include/hw/s390x/sclp.h
>>>> +++ b/include/hw/s390x/sclp.h
>>>> @@ -242,5 +242,7 @@ sclpMemoryHotplugDev *init_sclp_memory_hotplug_dev(void);
>>>> sclpMemoryHotplugDev *get_sclp_memory_hotplug_dev(void);
>>>> void sclp_service_interrupt(uint32_t sccb);
>>>> void raise_irq_cpu_hotplug(void);
>>>> +typedef struct CPUS390XState CPUS390XState;
>>>> +int sclp_service_call(CPUS390XState *env, uint64_t sccb, uint32_t code);
>>>
>>> That's dangerous and likely does not work with certain versions of GCC.
>>> You can't do a "forward declaration" with typedef in C, I'm afraid. See
>>> for example:
>>>
>>> https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg01454.html
>>> https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg03337.html
>>> https://stackoverflow.com/questions/8367646/redefinition-of-typedef
>>>
>>> All this typedef'ing in QEMU is pretty bad ... we run into this problem
>>> again and again. include/qemu/typedefs.h is just a work-around for this.
>>> I know people like typedefs for some reasons (I used to do that, too,
>>> before I realized the trouble with them), but IMHO we should rather
>>> adopt the typedef-related rules from the kernel coding conventions instead:
>>>
>>> https://www.kernel.org/doc/html/v4.13/process/coding-style.html#typedefs
>>>
>>> Thomas
>>>
>>
>> Yes, this is really nasty. And I wasn't aware of the involved issues.
>>
>> This seems to be the only feasible solution (including cpu.h sounds
>> wrong and will require a bunch of other includes):
>>
>>
>> diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h
>> index a72d096081..ce80915a02 100644
>> --- a/include/hw/s390x/sclp.h
>> +++ b/include/hw/s390x/sclp.h
>> @@ -242,5 +242,7 @@ sclpMemoryHotplugDev
>> *init_sclp_memory_hotplug_dev(void);
>> sclpMemoryHotplugDev *get_sclp_memory_hotplug_dev(void);
>> void sclp_service_interrupt(uint32_t sccb);
>> void raise_irq_cpu_hotplug(void);
>> +struct CPUS390XState;
>> +int sclp_service_call(struct CPUS390XState *env, uint64_t sccb,
>> uint32_t code);
>>
>> #endif
>
> Why not use typedefs.h?
See Markus's reply. But, maybe it's even better to use S390CPU* and
include target/s390x/cpu-qom.h, which by design provides as little
definitions as needed.
> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
> ---
> diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h
> index 4b86a8a293..3512bf8283 100644
> --- a/include/hw/s390x/sclp.h
> +++ b/include/hw/s390x/sclp.h
> @@ -242,7 +242,6 @@ sclpMemoryHotplugDev *init_sclp_memory_hotplug_dev(void);
> sclpMemoryHotplugDev *get_sclp_memory_hotplug_dev(void);
> void sclp_service_interrupt(uint32_t sccb);
> void raise_irq_cpu_hotplug(void);
> -typedef struct CPUS390XState CPUS390XState;
> int sclp_service_call(CPUS390XState *env, uint64_t sccb, uint32_t code);
>
> #endif
> diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
> index 39bc8351a3..9c97bffa92 100644
> --- a/include/qemu/typedefs.h
> +++ b/include/qemu/typedefs.h
> @@ -21,6 +21,7 @@ typedef struct Chardev Chardev;
> typedef struct CompatProperty CompatProperty;
> typedef struct CPUAddressSpace CPUAddressSpace;
> typedef struct CPUState CPUState;
> +typedef struct CPUS390XState CPUS390XState;
> typedef struct DeviceListener DeviceListener;
> typedef struct DeviceState DeviceState;
> typedef struct DirtyBitmapSnapshot DirtyBitmapSnapshot;
> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
> index 032d1de2e8..f99a82cd5e 100644
> --- a/target/s390x/cpu.h
> +++ b/target/s390x/cpu.h
> @@ -80,7 +80,7 @@ typedef struct MchkQueue {
> uint16_t type;
> } MchkQueue;
>
> -typedef struct CPUS390XState {
> +struct CPUS390XState {
> uint64_t regs[16]; /* GP registers */
> /*
> * The floating point registers are part of the vector registers.
> @@ -174,7 +174,7 @@ typedef struct CPUS390XState {
> /* currently processed sigp order */
> uint8_t sigp_order;
>
> -} CPUS390XState;
> +};
>
> static inline CPU_DoubleU *get_freg(CPUS390XState *cs, int nr)
> {
>
>
>
>> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
>> index 3aa2e46aac..032d1de2e8 100644
>> --- a/target/s390x/cpu.h
>> +++ b/target/s390x/cpu.h
>> @@ -721,6 +721,5 @@ int s390_cpu_virt_mem_rw(S390CPU *cpu, vaddr laddr,
>> uint8_t ar, void *hostbuf,
>>
>> /* outside of target/s390x/ */
>> S390CPU *s390_cpu_addr2state(uint16_t cpu_addr);
>> -int sclp_service_call(CPUS390XState *env, uint64_t sccb, uint32_t code);
>>
>> #endif
>> diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
>> index b142db71c6..8b07535b02 100644
>> --- a/target/s390x/misc_helper.c
>> +++ b/target/s390x/misc_helper.c
>> @@ -35,6 +35,7 @@
>> #include "sysemu/sysemu.h"
>> #include "hw/s390x/ebcdic.h"
>> #include "hw/s390x/s390-virtio-hcall.h"
>> +#include "hw/s390x/sclp.h"
>> #endif
>>
>> /* #define DEBUG_HELPER */
>>
>>
>> Opinions?
>>
>>
>>
>> --
>>
>> Thanks,
>>
>> David
>
next prev parent reply other threads:[~2017-09-11 10:23 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-07 20:13 [Qemu-devel] [PATCH v3 00/21] s390x cleanups and CPU hotplug via device_add David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 01/21] exec, dump, i386, ppc, s390x: don't include exec/cpu-all.h explicitly David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 02/21] cpu: drop old comments describing members David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 03/21] s390x: get rid of s390-virtio.c David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 04/21] s390x: rename s390-virtio.h to s390-virtio-hcall.h David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 05/21] target/s390x: move typedef of S390CPU to its definition David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 06/21] s390x: move s390_virtio_hypercall() to s390-virtio-hcall.h David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 07/21] s390x: move subsystem_reset() to s390-virtio-ccw.h David Hildenbrand
2017-09-08 3:58 ` Thomas Huth
2017-09-08 7:50 ` Christian Borntraeger
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 08/21] s390x: move sclp_service_call() to sclp.h David Hildenbrand
2017-09-08 4:21 ` Thomas Huth
2017-09-08 12:29 ` Markus Armbruster
2017-09-11 2:19 ` Thomas Huth
2017-10-02 7:01 ` Markus Armbruster
2017-09-08 12:46 ` David Hildenbrand
2017-09-09 22:07 ` Eduardo Habkost
2017-09-11 2:23 ` Thomas Huth
2017-09-11 18:22 ` Eduardo Habkost
2017-09-11 10:23 ` Paolo Bonzini [this message]
2017-09-11 13:45 ` David Hildenbrand
2017-09-11 17:52 ` Eduardo Habkost
2017-09-11 17:56 ` David Hildenbrand
2017-09-11 18:06 ` Eduardo Habkost
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 09/21] target/s390x: use trigger_pgm_exception() in s390_cpu_handle_mmu_fault() David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 10/21] target/s390x: use program_interrupt() in per_check_exception() David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 11/21] s390x: allow only 1 CPU with TCG David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 12/21] target/s390x: set cpu->id for linux user when realizing David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 13/21] target/s390x: use "core-id" for cpu number/address/id handling David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 14/21] target/s390x: rename next_cpu_id to next_core_id David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 15/21] s390x: print CPU definitions in sorted order David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 16/21] s390x: allow cpu hotplug via device_add David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 17/21] s390x: CPU hot unplug via device_del cannot work for now David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 18/21] s390x: implement query-hotpluggable-cpus David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 19/21] s390x: get rid of cpu_s390x_create() David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 20/21] s390x: generate sclp cpu information from possible_cpus David Hildenbrand
2017-09-07 20:13 ` [Qemu-devel] [PATCH v3 21/21] s390x: allow CPU hotplug in random core-id order David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c758ae70-a664-d13a-dd24-768f71e3f2e4@redhat.com \
--to=pbonzini@redhat.com \
--cc=agraf@suse.de \
--cc=armbru@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=eblake@redhat.com \
--cc=ehabkost@redhat.com \
--cc=mjrosato@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).