* [Qemu-devel] [PATCH v0] qemu-io: add pattern file for write command
@ 2019-05-29 6:48 Denis Plotnikov
2019-05-29 8:11 ` Vladimir Sementsov-Ogievskiy
0 siblings, 1 reply; 3+ messages in thread
From: Denis Plotnikov @ 2019-05-29 6:48 UTC (permalink / raw)
To: kwolf, mreitz, qemu-block; +Cc: vsementsov, qemu-devel, den
The patch allows to provide a pattern file for write
command. There was no similar ability before.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
---
qemu-io-cmds.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 54 insertions(+), 4 deletions(-)
diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 09750a23ce..b93955116f 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -21,6 +21,7 @@
#include "qemu/option.h"
#include "qemu/timer.h"
#include "qemu/cutils.h"
+#include "string.h"
#define CMD_NOFILE_OK 0x01
@@ -343,6 +344,35 @@ static void *qemu_io_alloc(BlockBackend *blk, size_t len, int pattern)
return buf;
}
+static void *qemu_io_alloc_from_file(BlockBackend *blk, size_t len,
+ char *file_name)
+{
+ void *buf;
+ FILE *f = fopen(file_name, "r");
+
+ if (!f) {
+ printf("cannot open file '%s'\n", file_name);
+ return NULL;
+ }
+
+ if (qemuio_misalign) {
+ len += MISALIGN_OFFSET;
+ }
+ buf = blk_blockalign(blk, len);
+ memset(buf, 0, len);
+
+ if (!fread(buf, sizeof(char), len, f)) {
+ printf("file '%s' is empty\n", file_name);
+ free(buf);
+ return NULL;
+ }
+
+ if (qemuio_misalign) {
+ buf += MISALIGN_OFFSET;
+ }
+ return buf;
+}
+
static void qemu_io_free(void *p)
{
if (qemuio_misalign) {
@@ -965,7 +995,7 @@ static const cmdinfo_t write_cmd = {
.perm = BLK_PERM_WRITE,
.argmin = 2,
.argmax = -1,
- .args = "[-bcCfnquz] [-P pattern] off len",
+ .args = "[-bcCfnquz] [-P pattern | -s source_file] off len",
.oneline = "writes a number of bytes at a specified offset",
.help = write_help,
};
@@ -974,7 +1004,7 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
{
struct timeval t1, t2;
bool Cflag = false, qflag = false, bflag = false;
- bool Pflag = false, zflag = false, cflag = false;
+ bool Pflag = false, zflag = false, cflag = false, sflag = false;
int flags = 0;
int c, cnt, ret;
char *buf = NULL;
@@ -983,8 +1013,9 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
/* Some compilers get confused and warn if this is not initialized. */
int64_t total = 0;
int pattern = 0xcd;
+ char file_name[255] = { 0 };
- while ((c = getopt(argc, argv, "bcCfnpP:quz")) != -1) {
+ while ((c = getopt(argc, argv, "bcCfnpP:quzs:")) != -1) {
switch (c) {
case 'b':
bflag = true;
@@ -1020,6 +1051,10 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
case 'z':
zflag = true;
break;
+ case 's':
+ sflag = true;
+ strncpy(file_name, optarg, sizeof(file_name) - 1);
+ break;
default:
qemuio_command_usage(&write_cmd);
return -EINVAL;
@@ -1056,6 +1091,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
return -EINVAL;
}
+ if (sflag && Pflag) {
+ printf("-s and -P cannot be specified at the same time\n");
+ }
+
+ if (zflag && Pflag) {
+ printf("-z and -P cannot be specified at the same time\n");
+ }
+
offset = cvtnum(argv[optind]);
if (offset < 0) {
print_cvtnum_err(offset, argv[optind]);
@@ -1088,7 +1131,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
}
if (!zflag) {
- buf = qemu_io_alloc(blk, count, pattern);
+ if (sflag) {
+ buf = qemu_io_alloc_from_file(blk, count, file_name);
+ if (!buf) {
+ return -EINVAL;
+ }
+ } else {
+ buf = qemu_io_alloc(blk, count, pattern);
+ }
}
gettimeofday(&t1, NULL);
--
2.17.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Qemu-devel] [PATCH v0] qemu-io: add pattern file for write command
2019-05-29 6:48 [Qemu-devel] [PATCH v0] qemu-io: add pattern file for write command Denis Plotnikov
@ 2019-05-29 8:11 ` Vladimir Sementsov-Ogievskiy
2019-05-29 8:41 ` Denis Plotnikov
0 siblings, 1 reply; 3+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2019-05-29 8:11 UTC (permalink / raw)
To: Denis Plotnikov, kwolf@redhat.com, mreitz@redhat.com,
qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Denis Lunev
29.05.2019 9:48, Denis Plotnikov wrote:
> The patch allows to provide a pattern file for write
> command. There was no similar ability before.
>
> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
> ---
> qemu-io-cmds.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 54 insertions(+), 4 deletions(-)
>
> diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
> index 09750a23ce..b93955116f 100644
> --- a/qemu-io-cmds.c
> +++ b/qemu-io-cmds.c
> @@ -21,6 +21,7 @@
> #include "qemu/option.h"
> #include "qemu/timer.h"
> #include "qemu/cutils.h"
> +#include "string.h"
>
> #define CMD_NOFILE_OK 0x01
>
> @@ -343,6 +344,35 @@ static void *qemu_io_alloc(BlockBackend *blk, size_t len, int pattern)
> return buf;
> }
>
> +static void *qemu_io_alloc_from_file(BlockBackend *blk, size_t len,
> + char *file_name)
> +{
> + void *buf;
> + FILE *f = fopen(file_name, "r");
> +
> + if (!f) {
> + printf("cannot open file '%s'\n", file_name);
I see, printf fro errors is preexisting in qemu-io-cmds.c, but error_report is used here too,
I think it's better to use error_report.
> + return NULL;
> + }
> +
> + if (qemuio_misalign) {
> + len += MISALIGN_OFFSET;
> + }
> + buf = blk_blockalign(blk, len);
> + memset(buf, 0, len);
> +
> + if (!fread(buf, sizeof(char), len, f)) {
> + printf("file '%s' is empty\n", file_name);
> + free(buf);
> + return NULL;
> + }
> +
> + if (qemuio_misalign) {
> + buf += MISALIGN_OFFSET;
hmm, preexisting in qemu_io_alloc and qemu_io_free, but If I remember correctly, pointer arithmetic
on void* is not guaranteed to work as expected here..
> + }
> + return buf;
> +}
> +
> static void qemu_io_free(void *p)
> {
> if (qemuio_misalign) {
> @@ -965,7 +995,7 @@ static const cmdinfo_t write_cmd = {
> .perm = BLK_PERM_WRITE,
> .argmin = 2,
> .argmax = -1,
> - .args = "[-bcCfnquz] [-P pattern] off len",
> + .args = "[-bcCfnquz] [-P pattern | -s source_file] off len",
> .oneline = "writes a number of bytes at a specified offset",
> .help = write_help,
> };
> @@ -974,7 +1004,7 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
> {
> struct timeval t1, t2;
> bool Cflag = false, qflag = false, bflag = false;
> - bool Pflag = false, zflag = false, cflag = false;
> + bool Pflag = false, zflag = false, cflag = false, sflag = false;
> int flags = 0;
> int c, cnt, ret;
> char *buf = NULL;
> @@ -983,8 +1013,9 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
> /* Some compilers get confused and warn if this is not initialized. */
> int64_t total = 0;
> int pattern = 0xcd;
> + char file_name[255] = { 0 };
>
> - while ((c = getopt(argc, argv, "bcCfnpP:quz")) != -1) {
> + while ((c = getopt(argc, argv, "bcCfnpP:quzs:")) != -1) {
> switch (c) {
> case 'b':
> bflag = true;
> @@ -1020,6 +1051,10 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
> case 'z':
> zflag = true;
> break;
> + case 's':
> + sflag = true;
> + strncpy(file_name, optarg, sizeof(file_name) - 1);
Maybe, g_strdup and don't care about file_name length?
> + break;
> default:
> qemuio_command_usage(&write_cmd);
> return -EINVAL;
> @@ -1056,6 +1091,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
> return -EINVAL;
> }
>
> + if (sflag && Pflag) {
> + printf("-s and -P cannot be specified at the same time\n");
> + }
> +
> + if (zflag && Pflag) {
> + printf("-z and -P cannot be specified at the same time\n");
> + }
strange, that you add this last check.. I see it in master branch already.
> +
> offset = cvtnum(argv[optind]);
> if (offset < 0) {
> print_cvtnum_err(offset, argv[optind]);
> @@ -1088,7 +1131,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
> }
>
> if (!zflag) {
> - buf = qemu_io_alloc(blk, count, pattern);
> + if (sflag) {
> + buf = qemu_io_alloc_from_file(blk, count, file_name);
> + if (!buf) {
> + return -EINVAL;
> + }
> + } else {
> + buf = qemu_io_alloc(blk, count, pattern);
> + }
> }
>
> gettimeofday(&t1, NULL);
>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Qemu-devel] [PATCH v0] qemu-io: add pattern file for write command
2019-05-29 8:11 ` Vladimir Sementsov-Ogievskiy
@ 2019-05-29 8:41 ` Denis Plotnikov
0 siblings, 0 replies; 3+ messages in thread
From: Denis Plotnikov @ 2019-05-29 8:41 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, kwolf@redhat.com, mreitz@redhat.com,
qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Denis Lunev
On 29.05.2019 11:11, Vladimir Sementsov-Ogievskiy wrote:
> 29.05.2019 9:48, Denis Plotnikov wrote:
>> The patch allows to provide a pattern file for write
>> command. There was no similar ability before.
>>
>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
>> ---
>> qemu-io-cmds.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++----
>> 1 file changed, 54 insertions(+), 4 deletions(-)
>>
>> diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
>> index 09750a23ce..b93955116f 100644
>> --- a/qemu-io-cmds.c
>> +++ b/qemu-io-cmds.c
>> @@ -21,6 +21,7 @@
>> #include "qemu/option.h"
>> #include "qemu/timer.h"
>> #include "qemu/cutils.h"
>> +#include "string.h"
>>
>> #define CMD_NOFILE_OK 0x01
>>
>> @@ -343,6 +344,35 @@ static void *qemu_io_alloc(BlockBackend *blk, size_t len, int pattern)
>> return buf;
>> }
>>
>> +static void *qemu_io_alloc_from_file(BlockBackend *blk, size_t len,
>> + char *file_name)
>> +{
>> + void *buf;
>> + FILE *f = fopen(file_name, "r");
>> +
>> + if (!f) {
>> + printf("cannot open file '%s'\n", file_name);
>
> I see, printf fro errors is preexisting in qemu-io-cmds.c, but error_report is used here too,
> I think it's better to use error_report.
write_f don't use error_report. I think it's worth to go with printf in
this case - not to mix up printf-s with error_report
>
>> + return NULL;
>> + }
>> +
>> + if (qemuio_misalign) {
>> + len += MISALIGN_OFFSET;
>> + }
>> + buf = blk_blockalign(blk, len);
>> + memset(buf, 0, len);
>> +
>> + if (!fread(buf, sizeof(char), len, f)) {
>> + printf("file '%s' is empty\n", file_name);
>> + free(buf);
>> + return NULL;
>> + }
>> +
>> + if (qemuio_misalign) {
>> + buf += MISALIGN_OFFSET;
>
> hmm, preexisting in qemu_io_alloc and qemu_io_free, but If I remember correctly, pointer arithmetic
> on void* is not guaranteed to work as expected here..
will change to g_malloc/g_free
>
>> + }
>> + return buf;
>> +}
>> +
>> static void qemu_io_free(void *p)
>> {
>> if (qemuio_misalign) {
>> @@ -965,7 +995,7 @@ static const cmdinfo_t write_cmd = {
>> .perm = BLK_PERM_WRITE,
>> .argmin = 2,
>> .argmax = -1,
>> - .args = "[-bcCfnquz] [-P pattern] off len",
>> + .args = "[-bcCfnquz] [-P pattern | -s source_file] off len",
>> .oneline = "writes a number of bytes at a specified offset",
>> .help = write_help,
>> };
>> @@ -974,7 +1004,7 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
>> {
>> struct timeval t1, t2;
>> bool Cflag = false, qflag = false, bflag = false;
>> - bool Pflag = false, zflag = false, cflag = false;
>> + bool Pflag = false, zflag = false, cflag = false, sflag = false;
>> int flags = 0;
>> int c, cnt, ret;
>> char *buf = NULL;
>> @@ -983,8 +1013,9 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
>> /* Some compilers get confused and warn if this is not initialized. */
>> int64_t total = 0;
>> int pattern = 0xcd;
>> + char file_name[255] = { 0 };
>>
>> - while ((c = getopt(argc, argv, "bcCfnpP:quz")) != -1) {
>> + while ((c = getopt(argc, argv, "bcCfnpP:quzs:")) != -1) {
>> switch (c) {
>> case 'b':
>> bflag = true;
>> @@ -1020,6 +1051,10 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
>> case 'z':
>> zflag = true;
>> break;
>> + case 's':
>> + sflag = true;
>> + strncpy(file_name, optarg, sizeof(file_name) - 1);
>
> Maybe, g_strdup and don't care about file_name length?
yeah, that would be better
>
>> + break;
>> default:
>> qemuio_command_usage(&write_cmd);
>> return -EINVAL;
>> @@ -1056,6 +1091,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
>> return -EINVAL;
>> }
>>
>> + if (sflag && Pflag) {
>> + printf("-s and -P cannot be specified at the same time\n");
>> + }
>> +
>> + if (zflag && Pflag) {
>> + printf("-z and -P cannot be specified at the same time\n");
>> + }
yes, this is an error. Here should be zflag && sflag
>
> strange, that you add this last check.. I see it in master branch already.
>
>> +
>> offset = cvtnum(argv[optind]);
>> if (offset < 0) {
>> print_cvtnum_err(offset, argv[optind]);
>> @@ -1088,7 +1131,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
>> }
>>
>> if (!zflag) {
>> - buf = qemu_io_alloc(blk, count, pattern);
>> + if (sflag) {
>> + buf = qemu_io_alloc_from_file(blk, count, file_name);
>> + if (!buf) {
>> + return -EINVAL;
>> + }
>> + } else {
>> + buf = qemu_io_alloc(blk, count, pattern);
>> + }
>> }
>>
>> gettimeofday(&t1, NULL);
>>
>
>
--
Best,
Denis
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-29 8:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-05-29 6:48 [Qemu-devel] [PATCH v0] qemu-io: add pattern file for write command Denis Plotnikov
2019-05-29 8:11 ` Vladimir Sementsov-Ogievskiy
2019-05-29 8:41 ` Denis Plotnikov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).