Re: [PATCH 1/3] m25p80: Convert to support tracing

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

On 2/3/20 7:09 PM, Guenter Roeck wrote:
> While at it, add some trace messages to help debug problems
> seen when running the latest Linux kernel.
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
>   hw/block/m25p80.c     | 48 ++++++++++++++++++++-----------------------
>   hw/block/trace-events | 16 +++++++++++++++
>   2 files changed, 38 insertions(+), 26 deletions(-)
> 
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index 11ff5b9ad7..63e050d7d3 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -32,17 +32,7 @@
>   #include "qemu/module.h"
>   #include "qemu/error-report.h"
>   #include "qapi/error.h"
> -
> -#ifndef M25P80_ERR_DEBUG
> -#define M25P80_ERR_DEBUG 0
> -#endif
> -
> -#define DB_PRINT_L(level, ...) do { \
> -    if (M25P80_ERR_DEBUG > (level)) { \
> -        fprintf(stderr,  ": %s: ", __func__); \
> -        fprintf(stderr, ## __VA_ARGS__); \
> -    } \
> -} while (0)
> +#include "trace.h"
>   
>   /* Fields for FlashPartInfo->flags */
>   
> @@ -574,7 +564,8 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
>           abort();
>       }
>   
> -    DB_PRINT_L(0, "offset = %#x, len = %d\n", offset, len);
> +    trace_m25p80_flash_erase(offset, len);
> +
>       if ((s->pi->flags & capa_to_assert) != capa_to_assert) {
>           qemu_log_mask(LOG_GUEST_ERROR, "M25P80: %d erase size not supported by"
>                         " device\n", len);
> @@ -607,8 +598,7 @@ void flash_write8(Flash *s, uint32_t addr, uint8_t data)
>       }
>   
>       if ((prev ^ data) & data) {
> -        DB_PRINT_L(1, "programming zero to one! addr=%" PRIx32 "  %" PRIx8
> -                   " -> %" PRIx8 "\n", addr, prev, data);
> +        trace_m25p80_programming_zero_to_one(addr, prev, data);
>       }
>   
>       if (s->pi->flags & EEPROM) {
> @@ -662,6 +652,9 @@ static void complete_collecting_data(Flash *s)
>   
>       s->state = STATE_IDLE;
>   
> +    trace_m25p80_complete_collecting(s->cmd_in_progress, n, s->ear,
> +                                     s->cur_addr);
> +
>       switch (s->cmd_in_progress) {
>       case DPP:
>       case QPP:
> @@ -825,7 +818,7 @@ static void reset_memory(Flash *s)
>           break;
>       }
>   
> -    DB_PRINT_L(0, "Reset done.\n");
> +    trace_m25p80_reset_done();
>   }
>   
>   static void decode_fast_read_cmd(Flash *s)
> @@ -941,9 +934,10 @@ static void decode_qio_read_cmd(Flash *s)
>   
>   static void decode_new_cmd(Flash *s, uint32_t value)
>   {
> -    s->cmd_in_progress = value;
>       int i;
> -    DB_PRINT_L(0, "decoded new command:%x\n", value);
> +
> +    s->cmd_in_progress = value;
> +    trace_m25p80_command_decoded(value);
>   
>       if (value != RESET_MEMORY) {
>           s->reset_enable = false;
> @@ -1042,7 +1036,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
>           break;
>   
>       case JEDEC_READ:
> -        DB_PRINT_L(0, "populated jedec code\n");
> +        trace_m25p80_populated_jedec();
>           for (i = 0; i < s->pi->id_len; i++) {
>               s->data[i] = s->pi->id[i];
>           }
> @@ -1063,7 +1057,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
>       case BULK_ERASE_60:
>       case BULK_ERASE:
>           if (s->write_enable) {
> -            DB_PRINT_L(0, "chip erase\n");
> +            trace_m25p80_chip_erase();
>               flash_erase(s, 0, BULK_ERASE);
>           } else {
>               qemu_log_mask(LOG_GUEST_ERROR, "M25P80: chip erase with write "
> @@ -1184,7 +1178,7 @@ static int m25p80_cs(SSISlave *ss, bool select)
>           s->data_read_loop = false;
>       }
>   
> -    DB_PRINT_L(0, "%sselect\n", select ? "de" : "");
> +    trace_m25p80_select(select ? "de" : "");
>   
>       return 0;
>   }
> @@ -1194,19 +1188,20 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
>       Flash *s = M25P80(ss);
>       uint32_t r = 0;
>   
> +    trace_m25p80_transfer(s->state, s->len, s->needed_bytes, s->pos,
> +                          s->cur_addr, (uint8_t)tx);
> +
>       switch (s->state) {
>   
>       case STATE_PAGE_PROGRAM:
> -        DB_PRINT_L(1, "page program cur_addr=%#" PRIx32 " data=%" PRIx8 "\n",
> -                   s->cur_addr, (uint8_t)tx);
> +        trace_m25p80_page_program(s->cur_addr, (uint8_t)tx);
>           flash_write8(s, s->cur_addr, (uint8_t)tx);
>           s->cur_addr = (s->cur_addr + 1) & (s->size - 1);
>           break;
>   
>       case STATE_READ:
>           r = s->storage[s->cur_addr];
> -        DB_PRINT_L(1, "READ 0x%" PRIx32 "=%" PRIx8 "\n", s->cur_addr,
> -                   (uint8_t)r);
> +        trace_m25p80_read_byte(s->cur_addr, (uint8_t)r);
>           s->cur_addr = (s->cur_addr + 1) & (s->size - 1);
>           break;
>   
> @@ -1244,6 +1239,7 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
>           }
>   
>           r = s->data[s->pos];
> +        trace_m25p80_read_data(s->pos, (uint8_t)r);
>           s->pos++;
>           if (s->pos == s->len) {
>               s->pos = 0;
> @@ -1281,7 +1277,7 @@ static void m25p80_realize(SSISlave *ss, Error **errp)
>               return;
>           }
>   
> -        DB_PRINT_L(0, "Binding to IF_MTD drive\n");
> +        trace_m25p80_binding();
>           s->storage = blk_blockalign(s->blk, s->size);
>   
>           if (blk_pread(s->blk, 0, s->storage, s->size) != s->size) {
> @@ -1289,7 +1285,7 @@ static void m25p80_realize(SSISlave *ss, Error **errp)
>               return;
>           }
>       } else {
> -        DB_PRINT_L(0, "No BDRV - binding to RAM\n");
> +        trace_m25p80_binding_no_bdrv();
>           s->storage = blk_blockalign(NULL, s->size);
>           memset(s->storage, 0xFF, s->size);
>       }
> diff --git a/hw/block/trace-events b/hw/block/trace-events
> index c03e80c2c9..d052f7578c 100644
> --- a/hw/block/trace-events
> +++ b/hw/block/trace-events
> @@ -134,3 +134,19 @@ xen_block_blockdev_add(char *str) "%s"
>   xen_block_blockdev_del(const char *node_name) "%s"
>   xen_block_device_create(unsigned int number) "%u"
>   xen_block_device_destroy(unsigned int number) "%u"
> +
> +# m25p80.c
> +m25p80_flash_erase(int offset, uint32_t len) "offset = 0x%"PRIx32", len = %u"
> +m25p80_programming_zero_to_one(uint32_t addr, uint8_t prev, uint8_t data) "programming zero to one! addr=0x%"PRIx32"  0x%"PRIx8" -> 0x%"PRIx8
> +m25p80_reset_done(void) "Reset done."
> +m25p80_command_decoded(uint32_t cmd) "new command:0x%"PRIx32
> +m25p80_complete_collecting(uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32
> +m25p80_populated_jedec(void) "populated jedec code"
> +m25p80_chip_erase(void) "chip erase"
> +m25p80_select(const char *what) "%sselect"
> +m25p80_page_program(uint32_t addr, uint8_t tx) "page program cur_addr=0x%"PRIx32" data=0x%"PRIx8
> +m25p80_transfer(uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8
> +m25p80_read_byte(uint32_t addr, uint8_t v) "Read byte 0x%"PRIx32"=0x%"PRIx8
> +m25p80_read_data(uint32_t pos, uint8_t v) "Read data 0x%"PRIx32"=0x%"PRIx8
> +m25p80_binding(void) "Binding to IF_MTD drive"
> +m25p80_binding_no_bdrv(void) "No BDRV - binding to RAM"
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>