From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Igor Mammedov" <imammedo@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Eduardo Habkost" <eduardo@habkost.net>
Subject: [PULL 38/73] pci: fix 'hotplugglable' property behavior
Date: Tue, 7 Mar 2023 20:12:43 -0500 [thread overview]
Message-ID: <ceefa0b74674f32aeedb1e93bcb6ec9cb12842b1.1678237635.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1678237635.git.mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
Currently the property may flip its state
during VM bring up or just doesn't work as
the name implies.
In particular with PCIE root port that has
'hotplug={on|off}' property, and when it's
turned off, one would expect
'hotpluggable' == false
for any devices attached to it.
Which is not the case since qbus_is_hotpluggable()
used by the property just checks for presence
of any hotplug_handler set on bus.
The problem is that name BusState::hotplug_handler
from its inception is misnomer, as it handles
not only hotplug but also in many cases coldplug
as well (i.e. generic wiring interface), and
it's fine to have hotplug_handler set on bus
while it doesn't support hotplug (ex. pcie-slot
with hotplug=off).
Another case of root port flipping 'hotpluggable'
state when ACPI PCI hotplug is enabled in this
case root port with 'hotplug=off' starts as
hotpluggable and then later on, pcihp
hotplug_handler clears hotplug_handler
explicitly after checking root port's 'hotplug'
property.
So root-port hotpluggablity check sort of works
if pcihp is enabled but is broken if pcihp is
disabled.
One way to deal with the issue is to ask
hotplug_handler if bus it controls is hotpluggable
or not. To do that add is_hotpluggable_bus()
hook to HotplugHandler interface and use it in
'hotpluggable' property + teach pcie-slot to
actually look into 'hotplug' property state
before deciding if bus is hotpluggable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/hotplug.h | 2 ++
include/hw/qdev-core.h | 13 ++++++++++++-
hw/pci/pcie_port.c | 8 ++++++++
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/include/hw/hotplug.h b/include/hw/hotplug.h
index e15f59c8b3..a9840ed485 100644
--- a/include/hw/hotplug.h
+++ b/include/hw/hotplug.h
@@ -48,6 +48,7 @@ typedef void (*hotplug_fn)(HotplugHandler *plug_handler,
* @unplug: unplug callback.
* Used for device removal with devices that implement
* asynchronous and synchronous (surprise) removal.
+ * @is_hotpluggable_bus: called to check if bus/its parent allow hotplug on bus
*/
struct HotplugHandlerClass {
/* <private> */
@@ -58,6 +59,7 @@ struct HotplugHandlerClass {
hotplug_fn plug;
hotplug_fn unplug_request;
hotplug_fn unplug;
+ bool (*is_hotpluggable_bus)(HotplugHandler *plug_handler, BusState *bus);
};
/**
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index f5b3b2f89a..bd50ad5ee1 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -812,7 +812,18 @@ void qbus_set_bus_hotplug_handler(BusState *bus);
static inline bool qbus_is_hotpluggable(BusState *bus)
{
- return bus->hotplug_handler;
+ HotplugHandler *plug_handler = bus->hotplug_handler;
+ bool ret = !!plug_handler;
+
+ if (plug_handler) {
+ HotplugHandlerClass *hdc;
+
+ hdc = HOTPLUG_HANDLER_GET_CLASS(plug_handler);
+ if (hdc->is_hotpluggable_bus) {
+ ret = hdc->is_hotpluggable_bus(plug_handler, bus);
+ }
+ }
+ return ret;
}
/**
diff --git a/hw/pci/pcie_port.c b/hw/pci/pcie_port.c
index 65a397ad23..000633fec1 100644
--- a/hw/pci/pcie_port.c
+++ b/hw/pci/pcie_port.c
@@ -161,6 +161,13 @@ PCIDevice *pcie_find_port_by_pn(PCIBus *bus, uint8_t pn)
return NULL;
}
+static bool pcie_slot_is_hotpluggbale_bus(HotplugHandler *plug_handler,
+ BusState *bus)
+{
+ PCIESlot *s = PCIE_SLOT(bus->parent);
+ return s->hotplug;
+}
+
static const TypeInfo pcie_port_type_info = {
.name = TYPE_PCIE_PORT,
.parent = TYPE_PCI_BRIDGE,
@@ -188,6 +195,7 @@ static void pcie_slot_class_init(ObjectClass *oc, void *data)
hc->plug = pcie_cap_slot_plug_cb;
hc->unplug = pcie_cap_slot_unplug_cb;
hc->unplug_request = pcie_cap_slot_unplug_request_cb;
+ hc->is_hotpluggable_bus = pcie_slot_is_hotpluggbale_bus;
}
static const TypeInfo pcie_slot_type_info = {
--
MST
next prev parent reply other threads:[~2023-03-08 1:17 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-08 1:10 [PULL 00/73] virtio,pc,pci: features, fixes Michael S. Tsirkin
2023-03-08 1:10 ` [PULL 01/73] cryptodev: Introduce cryptodev.json Michael S. Tsirkin
2023-03-08 1:10 ` [PULL 02/73] cryptodev: Remove 'name' & 'model' fields Michael S. Tsirkin
2023-03-08 1:10 ` [PULL 03/73] cryptodev: Introduce cryptodev alg type in QAPI Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 04/73] cryptodev: Introduce server " Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 05/73] cryptodev: Introduce 'query-cryptodev' QMP command Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 06/73] cryptodev-builtin: Detect akcipher capability Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 07/73] hmp: add cryptodev info command Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 08/73] cryptodev: Use CryptoDevBackendOpInfo for operation Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 09/73] cryptodev: Account statistics Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 10/73] cryptodev: support QoS Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 11/73] cryptodev: Support query-stats QMP command Michael S. Tsirkin
2023-05-02 17:03 ` Peter Maydell
2023-05-03 4:19 ` zhenwei pi
2023-03-08 1:11 ` [PULL 12/73] MAINTAINERS: add myself as the maintainer for cryptodev Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 13/73] vdpa net: move iova tree creation from init to start Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 14/73] vdpa: Remember last call fd set Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 15/73] vdpa: Negotiate _F_SUSPEND feature Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 16/73] vdpa: rewind at get_base, not set_base Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 17/73] vdpa: add vhost_vdpa->suspended parameter Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 18/73] vdpa: add vhost_vdpa_suspend Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 19/73] vdpa: move vhost reset after get vring base Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 20/73] vdpa: add vdpa net migration state notifier Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 21/73] vdpa: disable RAM block discard only for the first device Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 22/73] vdpa net: block migration if the device has CVQ Michael S. Tsirkin
2023-03-08 1:11 ` [PULL 23/73] vdpa: block migration if device has unsupported features Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 24/73] vdpa: block migration if SVQ does not admit a feature Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 25/73] vdpa net: allow VHOST_F_LOG_ALL Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 26/73] vdpa: return VHOST_F_LOG_ALL in vhost-vdpa devices Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 27/73] Revert "tests/qtest: Check for devices in bios-tables-test" Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 28/73] tests: acpi: whitelist new q35.noacpihp test and pc.hpbrroot Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 29/73] tests: acpi: add test_acpi_q35_tcg_no_acpi_hotplug test and extend test_acpi_piix4_no_acpi_pci_hotplug Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 30/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-13 10:57 ` Philippe Mathieu-Daudé
2023-03-13 12:59 ` Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 31/73] tests: acpi: whitelist q35/DSDT.multi-bridge before extending testcase Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 32/73] tests: acpi: extend multi-bridge case with case 'root-port,id=HOHP,hotplug=off root-port,bus=NOHP' Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 33/73] x86: pcihp: fix missing PCNT callchain when intermediate root-port has 'hotplug=off' set Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 34/73] tests: acpi: whitelist pc/DSDT.hpbrroot and pc/DSDT.hpbridge tests Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 35/73] x86: pcihp: fix missing bridge AML when intermediate root-port has 'hotplug=off' set Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 36/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 37/73] pcihp: piix4: do not redirect hotplug controller to piix4 when ACPI hotplug is disabled Michael S. Tsirkin
2023-03-08 1:12 ` Michael S. Tsirkin [this message]
2023-03-08 1:12 ` [PULL 39/73] tests: acpi: whitelist DSDT blobs before isolating PCI _DSM func 0 prolog Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 40/73] pcihp: move PCI _DSM function 0 prolog into separate function Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 41/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 42/73] tests: acpi: whitelist DSDT before adding EDSM method Michael S. Tsirkin
2023-03-08 1:12 ` [PULL 43/73] acpi: pci: add EDSM method to DSDT Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 44/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 45/73] tests: acpi: whitelist DSDT before adding device with acpi-index to testcases Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 46/73] tests: acpi: add device with acpi-index on non-hotpluggble bus Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 47/73] acpi: pci: support acpi-index for non-hotpluggable devices Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 48/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 49/73] tests: acpi: whitelist DSDT before exposing non zero functions Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 50/73] acpi: pci: describe all functions on populated slots Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 51/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 52/73] tests: acpi: whitelist DSDT before adding non-0 function device with acpi-index to testcases Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 53/73] tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 54/73] tests: acpi: update expected blobs Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 55/73] pci: move acpi-index uniqueness check to generic PCI device code Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 56/73] acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 57/73] acpi: pci: move BSEL into build_append_pcihp_slots() Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 58/73] acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices() Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 59/73] pcihp: move fields enabling hotplug into AcpiPciHpState Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 60/73] pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 61/73] hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register Michael S. Tsirkin
2023-04-26 0:42 ` Peter Xu
2023-04-26 6:12 ` Michael S. Tsirkin
2023-04-26 7:19 ` Juan Quintela
2023-05-03 0:32 ` Leonardo Brás
2023-05-03 4:08 ` Michael S. Tsirkin
2023-05-03 9:31 ` Jonathan Cameron via
2023-03-08 1:13 ` [PULL 62/73] hw/pci/aer: Add missing routing for AER errors Michael S. Tsirkin
2023-03-08 1:13 ` [PULL 63/73] hw/pci-bridge/cxl_root_port: Wire up AER Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 64/73] hw/pci-bridge/cxl_root_port: Wire up MSI Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 65/73] hw/mem/cxl-type3: Add AER extended capability Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 66/73] hw/cxl: Fix endian issues in CXL RAS capability defaults / masks Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 67/73] hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 68/73] hw/mem/cxl_type3: Add CXL RAS Error Injection Support Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 69/73] hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 70/73] hw/pxb-cxl: Support passthrough HDM Decoders unless overridden Michael S. Tsirkin
2023-04-11 10:26 ` Peter Maydell
2023-04-17 11:22 ` Thomas Huth
2023-04-17 11:29 ` Michael S. Tsirkin
2023-04-17 13:04 ` Thomas Huth
2023-04-19 13:43 ` Jonathan Cameron via
2023-04-19 13:57 ` Jonathan Cameron via
2023-04-19 14:49 ` Jonathan Cameron via
2023-04-19 16:25 ` Peter Maydell
2023-04-19 17:18 ` Jonathan Cameron via
2023-03-08 1:14 ` [PULL 71/73] hw/virtio/vhost-user: avoid using unitialized errp Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 72/73] virtio: fix reachable assertion due to stale value of cached region size Michael S. Tsirkin
2023-03-08 1:14 ` [PULL 73/73] virtio: refresh vring region cache after updating a virtqueue size Michael S. Tsirkin
2023-03-09 14:48 ` Michael S. Tsirkin
2023-03-09 14:47 ` [PULL 00/73] virtio,pc,pci: features, fixes Michael S. Tsirkin
2023-03-10 17:32 ` Peter Maydell
2023-03-10 22:20 ` Philippe Mathieu-Daudé
2023-03-11 19:22 ` Michael S. Tsirkin
2023-03-13 8:03 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ceefa0b74674f32aeedb1e93bcb6ec9cb12842b1.1678237635.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=berrange@redhat.com \
--cc=eduardo@habkost.net \
--cc=imammedo@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).